Applescript LabelGraphics script error
When running the provided LabelGraphics applescript I get an error on the line:
my LabelGraphics of me to {myLabelType, myLabelStyleName, myLabelLayerName, myLabelHeight, myLabelOffset}
The error is:
Error number: -2470
Error string: A to:{myLabelType, myLabelStyleName, myLabelLayerName,myLabelHeight, myLabelOffset}
can't go after this LabelGraphics of me.
Does anyone know the proper syntax to get this to work? Thanks!
I added the lines of script as requested so the script in full now reads as:
set vpn_ip to do shell script "ifconfig tun0 | grep inet | awk '{print $2}'" # get current ip of vpn interface
display dialog vpn_id
set vpn_port to do shell script "curl -d \"user=USERNAME&pass=PASSWORD&client_id=$(cat ~/.pia_client_id)&local_ip=" & vpn_ip & "\"https://www.privateinternetaccess.com/vpninfo/port_forward_assignment 2> /dev/null|grep -oE \"[0-9]+\""
display dialog vpn_port
do shell script "defaults delete org.m0k.transmission BindPort" # delete previous port value
do shell script "defaults write org.m0k.transmission BindPort " & vpn_port & ""
do shell script "defaults delete org.m0k.transmission BindAddressIPv4" #delete previously written ipv4binding value
do shell script "defaults write org.m0k.transmission BindAddressIPv4 " & vpn_ip & "" #write current vpn ip into transmission.plist
(Censored my username and password).
I run the script and get this error:
error "The variable vpn_id is not defined." number -2753 from "vpn_id"
With the first new additional code highlighted "vpn_id".
display dialog vpn_id
I created the .pia_client_id file but running a line of code in Terminal (which was detailed in the oringal thread where I found the script). The code I ran in Terminal was:
head -n 100 /dev/urandom | md5 > ~/.pia_client_id
Thanks so much for your assistance so far, I really appreciate it.
Similar Messages
-
Applescript 'Contacts' code error with Maverick
After upgrading from MacOSX 10.6.8 to Maverick my applescripts are creating errors. One example is the following script which works fine if you run it from within the 'Applescript Editor.app' (v 2.6.1) under Maverick but creates a "Data paste section" error -1743 from the 'Contacts' app if you run the script indpendently. Any hints anyone on how I might return this script to full indpendent functionality?
Script to load a raw address for conversion and inserting into Address Book
Wish list
1. Check if 'New Address' Group already exists and if it doesn't then create one.
2. Provide a dialog that enables the user to specify which group to attach the new address to.
3. Find the new address and show it in Address Book.
4. Create a list of existing Groups to chose from to reduce keyboard error. --> done but the resultant window is not complete - no scroll bar becomes active.
Problem code:
set theFiles to (every file of folder addressesFolder) as alias list
global ABactive, aExists
property testText : "http://address-parser.com"
property newGroup : "New Addresses" --> Default group for new address additions
property aPrefix : ""
property aFirstName : ""
property aMiddleName : ""
property aLastName : ""
property aSuffix : ""
property aPosition : ""
property aDepartment : ""
property aCompany : ""
property aCompany2 : ""
property aStreet : ""
property aStreet2 : ""
property aPostbox : ""
property aPlace : ""
property aPostPlace : ""
property aState : ""
property aZip : ""
property aPostboxCode : ""
property aCountry : ""
property aPhone : ""
property aPhone2 : ""
property aMobile : ""
property aFax : ""
property aEmail : ""
property aWebsite : ""
property aNote : ""
set newline to ASCII character 10
-- Select the desired file
try
set addressFile to (choose file with prompt "Choose an address file:" of type {"public.text"} without invisibles) as text
-- set addressFile to (choose file with prompt "Choose an address file:" of type {"public.text"} default location addressesFolder without invisibles) as text
-- note the data type set for 'addressFile' is 'text'
on error number -128
-- User pressed 'Cancel' button
return
end try
set AppleScript's text item delimiters to {":"}
set fileName to last text item of addressFile
set AppleScript's text item delimiters to {""}
(* If there is an error while processing the address file, delay it just long enough to close the file access. Otherwise continue. *)
set addressFileReference to open for access addressFile
-- 'addressFileReference' is the 'returned access number'
-- Check first to see whether the file was created with output from the expected source
try
set wholeFile to read addressFileReference as text
if (offset of testText in wholeFile) is equal to 0 then
display dialog "File chosen is:" & return & fileName & return & return & "This file does not appear to contain output from the 'http://www.address-parser.com' demo page." buttons {"Cancel"} default button 1 with title "Error!" with icon stop
end if
on error number -128
-- User pressed 'Cancel' button
close access addressFileReference
set wholeFile to ""
return
end try
close access addressFileReference
set wholeFile to ""
-- Reopen file (need to clarify why EOF error if two read calls made with file open).
set addressFileReference to open for access addressFile
try
set AppleScript's text item delimiters to {""}
-- Read address file contents in 'addressFileContents' as a list delimited by paragraph and tab.
set x to paragraphs of (read addressFileReference as text)
set addressFileContents to {}
set AppleScript's text item delimiters to tab
repeat with i from 1 to count x
set addressFileContents's end to x's item i's text items
end repeat
set AppleScript's text item delimiters to {""}
repeat with i from 1 to count of addressFileContents
if (item i of addressFileContents) is not {} then
--Every line must be checked as there is no set order
if text item 1 of (item i of addressFileContents) is "Prefix= " then ¬
set aPrefix to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "First name= " then ¬
set aFirstName to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Middle name= " then ¬
set aMiddleName to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Last name= " then ¬
set aLastName to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Suffix= " then ¬
set aSuffix to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Position= " then ¬
set aPosition to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Department= " then ¬
set aDepartment to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Company= " then ¬
set aCompany to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Company - line 2= " then ¬
set aCompany2 to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Street address= " then ¬
set aStreet to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Street address - line 2= " then ¬
set aStreet2 to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Postbox address= " then ¬
set aPostbox to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Place name= " then ¬
set aPlace to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Post place name= " then ¬
set aPostPlace to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "State/Region/Province= " then ¬
set aState to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "ZIP/Postal code= " then ¬
set aZip to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Postal code of postbox= " then ¬
set aPostboxCode to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Country= " then ¬
set aCountry to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Phone= " then ¬
set aPhone to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Phone 2= " then ¬
set aPhone2 to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Mobile phone= " then ¬
set aMobile to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Fax= " then ¬
set aFax to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Email= " then ¬
set aEmail to text item 2 of (item i of addressFileContents)
if text item 1 of (item i of addressFileContents) is "Web site= " then ¬
set aWebsite to text item 2 of (item i of addressFileContents)
--Collect unrecognised elements and place them in the 'Note' field
if text item 1 of (item i of addressFileContents) contains "Unrecognized values:" then
set i to i + 1
set aNote to "Additional address bits:"
repeat with i from i to count of addressFileContents
--display dialog "Note text reads:" & return & "aNote:" & tab & "'" & aNote & "'" & return & "Line #:" & tab & i & return & (item i of addressFileContents) as text default button 1 with title "Debug Dialog"
if (item i of addressFileContents) is not {} then
if item 1 of (item i of addressFileContents) is "" and ¬
item 2 of (item i of addressFileContents) is not "" then
set aNote to aNote & newline & text item 2 of (item i of addressFileContents)
end if
end if
end repeat
end if
end if
end repeat
on error errMsg number errNum
close access addressFileReference
-- do some sort of error processing here
display dialog "An error occurred with the following number and description: " & return & errNum & return & errMsg & return & return & "Item " & (i as string) & tab & "'" & (item i of addressFileContents) & "'" with title "Data load section."
error errMsg number errNum
end try
close access addressFileReference
--Debug dialogs
--display dialog (item 1 of addressFileContents as text) & return & return & (item 2 of addressFileContents as text) & return & return & (item 3 of addressFileContents as text) & return & return & (item 4 of addressFileContents as text)
--display dialog "title:" & tab & tab & tab & aPrefix & return & "first name:" & tab & tab & aFirstName & return & "middle name:" & tab & tab & aMiddleName & return & "last name:" & tab & tab & aLastName & return & "suffix:" & tab & tab & tab & aSuffix & return & "job title:" & tab & tab & tab & aPosition & return & "department:" & tab & aDepartment & return & "organization:" & tab & aCompany with title "Just prior to new record insertion:" with icon note
--check if Contacts application is active
tell application "System Events"
if exists application process "Contacts" then
set ABactive to true
else
set ABactive to false
end if
end tell
--display dialog "title:" & tab & tab & tab & aPrefix & return & "first name:" & tab & tab & aFirstName & return & "middle name:" & tab & tab & aMiddleName & return & "last name:" & tab & tab & aLastName & return & "suffix:" & tab & tab & tab & aSuffix & return & "job title:" & tab & tab & tab & aPosition & return & "department:" & tab & aDepartment & return & "organization:" & tab & aCompany with title "Just prior to create new entry:" with icon note
--create new address entry
tell application "Contacts"
try
--if the aCompany2 variable is filled append its contents to the aCompany variable
if aCompany2 is equal to "" then
set thePerson to make new person with properties ¬
{title:aPrefix, first name:aFirstName, middle name:aMiddleName, last name:aLastName, suffix:aSuffix, job title:aPosition, department:aDepartment, organization:aCompany}
else
set aCompany to aCompany & newline & aCompany2
set thePerson to make new person with properties ¬
{title:aPrefix, first name:aFirstName, middle name:aMiddleName, last name:aLastName, suffix:aSuffix, job title:aPosition, department:aDepartment, organization:aCompany}
end if
--set the Company view binary if no First and Last name
if (first name of thePerson is equal to "") and (last name of thePerson is equal to "") then ¬
set the company of thePerson to true
tell thePerson
if aPhone is not equal to "" then ¬
make new phone at end of phones with properties ¬
{label:"work", value:aPhone}
if aPhone2 is not equal to "" then ¬
make new phone at end of phones with properties ¬
{label:"other", value:aPhone2}
if aMobile is not equal to "" then ¬
make new phone at end of phones with properties ¬
{label:"mobile", value:aMobile}
if aFax is not equal to "" then ¬
make new phone at end of phones with properties ¬
{label:"fax", value:aFax}
if aEmail is not equal to "" then ¬
make new email at end of emails with properties ¬
{label:"Work", value:aEmail}
if aWebsite is not equal to "" then ¬
make new url at end of urls with properties ¬
{label:"Work", value:aWebsite}
if aStreet is not equal to "" then
if aStreet2 is equal to "" then
make new address at end of addresses with properties ¬
{label:"work", street:aStreet, city:aPlace, state:aState, zip:aZip, country:aCountry}
else
make new address at end of addresses with properties ¬
{label:"work", street:aStreet & ", " & aStreet2, city:aPlace, state:aState, zip:aZip, country:aCountry}
end if
end if
if aPostPlace is equal to "" then set aPostPlace to aPlace
if aPostbox is not equal to "" then
if aPostboxCode is not equal to "" then
make new address at end of addresses with properties ¬
{label:"postal", street:aPostbox, city:aPostPlace, state:aState, zip:aPostboxCode, country:aCountry}
else
make new address at end of addresses with properties ¬
{label:"postal", street:aPostbox, city:aPlace, state:aState, zip:aZip, country:aCountry}
end if
end if
if aNote is not equal to "" then set note to aNote
end tell
-- place the new entry into a group
set myGroups to name of every group
set theGroup to (choose from list myGroups with prompt "Attach to which group?" without multiple selections allowed and empty selection allowed) as text
--If user selects 'Cancel' button the value of the result variable is 'false'
if theGroup is not "false" then
add thePerson to group theGroup
else
-- create a default group and place the entry in there; first testing to see whether the default group already exists
try
if group newGroup exists then ¬
display dialog "newGroup exists" with icon 1
add thePerson to group newGroup
on error number -1728
-- newGroup does not exist so create it
display dialog "newGroup does not exist. Make new group with newGroup" with icon 1
set theGroup to make new group with properties {name:newGroup}
add thePerson to group newGroup
end try
end if
save application "Contacts"
set selection to (thePerson)
activate
--set flag that new address entry was successful by seeking
if the selection is equal to properties ¬
{title:aPrefix, first name:aFirstName, ¬
middle name:aMiddleName, last name:aLastName, ¬
suffix:aSuffix, job title:aPosition, ¬
department:aDepartment, organization:aCompany} then ¬
set aExists to true
on error errMsg number errNum
-- do some sort of error processing here
display dialog "An error occurred with the following number and description: " & return & errNum & return & errMsg with title "Data paste section."
error errMsg number errNum
end try
--if we opened the AB, we'll close it
if not ABactive then quit
end tell
--clear address variables content in case of repeat use
set aPrefix to ""
set aFirstName to ""
set aMiddleName to ""
set aLastName to ""
set aSuffix to ""
set aPosition to ""
set aDepartment to ""
set aCompany to ""
set aCompany2 to ""
set aStreet to ""
set aStreet2 to ""
set aPostbox to ""
set aPlace to ""
set aState to ""
set aZip to ""
set aPostboxCode to ""
set aCountry to ""
set aPhone to ""
set aPhone2 to ""
set aMobile to ""
set aFax to ""
set aEmail to ""
set aWebsite to ""
set aNote to ""
-- Delete original file if contents have been successfully added
if aExists then
try
tell application "Finder"
if exists file addressFile then
delete file addressFile --moves it to the trash
end if
end tell
on error errMsg number errNum
display dialog "Inserting new address was successfiul, however an error occurred while deleting the original file:" & return & addressFile buttons {"Cancel"} default button 1 with title "Error!" with icon stop
display dialog ""
end try
end if
-- End of 'add address' scriptWell, after a few days of restoring my cellphone (The C6-01 I mentioned before), I came to this:
- After Hard resetting, the Lock Code is still erroneous;
- After firmware reinstalling, Lock Code is erroneous;
- Pulling out the battery, leaving the cellphone with no power for several hours, give the same result;
- Downgrading firmware (previous version) did not fix the problem;
Interesting thing is, after power on, the cellphone asks for the code lock: entering ANY number, returns "Code Error", and simply goes back to normal operation.
Everything is working, except I can no use de Lock Code, or any function related to it.
Of course, is pretty annoying to enter the lock code every time I power-on the cell. -
Low disk space Applescript (AppleEvent handler error -10000)
Hello,
I am new to Applescript, downloaded script from online for low disk space alert and was working properly on one mac but getting error on another mac of same version. Someone please help me on this.
Thanks in advance.
-- Script to warn users of low disk space remaining on fixed (hard) disks
-- Created by Matthew Lindfield Seager on 21st March 2007
-- © Copyright Matthew Lindfield Seager
---------- change these settings ----------
set expectedNumberOfHardDisks to 2
set minimumFreeSpacePercentage to 60
set sendToAddresses to {"[email protected]"}
set sendImmediately to false -- If this setting is false the message will be created but won't be sent until someone manually clicks the "send" button. Only useful for testing!!!
---------- change these settings ----------
tell application "System Events"
set hardDisks to (name of every disk whose local volume is true and ejectable is false) as list -- list of all hard disk drives
set notEnoughDisks to false
set almostFullDisks to {}
set almostFullDiskNames to ""
set computername to (do shell script "networksetup -getcomputername")
if (count of hardDisks) is less than expectedNumberOfHardDisks then
set notEnoughDisks to true
end if
repeat with i in hardDisks
set diskName to (i as string)
try
set totalSpace to round ((capacity of disk diskName) / 1024 / 1024)
set freeSpace to round ((free space of disk diskName) / 1024 / 1024)
set percentFree to (round (100 * freeSpace / totalSpace))
if percentFree is less than minimumFreeSpacePercentage then
set almostFullDisks to almostFullDisks & {i}
set almostFullDiskNames to almostFullDiskNames & diskName & ", "
end if
end try
end repeat
end tell
if notEnoughDisks or ((count of almostFullDisks) is greater than 0) then
set messageText to "There is a potential problem with the hard disk drives on the server." & return & return & "Details:" & return
if notEnoughDisks then set messageText to messageText & " * A hard disk drive may be missing" & return
if (count of almostFullDisks) is greater than 0 then
set messageText to messageText & " * The following hard disks may be close to full capacity: " & almostFullDiskNames & computername & return
end if
tell application "Mail"
activate
set warningMessage to make new outgoing message with properties {visible:true, subject:"Warning: Low disk space", contentmessageText)}
repeat with i in sendToAddresses
tell warningMessage
make new to recipient at beginning of to recipients with properties {address:i}
end tell
end repeat
if sendImmediately then send warningMessage
end tell
end if
Following is the error:
tell application "System Events"
get name of every disk whose local volumn = true and ejectable=false
-->error number -10000
Result:
error "System Events got an error: AppleEvent handler failed." number -10000.Hi,
I believe these are the commands (round and do shell script) which causes this error.
because it's not recommended to use commands of the osax "Standard Additions" in the 'tell application "System Events"' block, although it works most of the time.
Here is the modified script that does the same thing :
set expectedNumberOfHardDisks to 2
set minimumFreeSpacePercentage to 60
set sendToAddresses to {"[email protected]"}
set sendImmediately to false -- If this setting is false the message will be created but won't be sent until someone manually clicks the "send" button. Only useful for testing!!!
set almostFull to ""
tell application "System Events"
set hardDisks to (disks whose local volume is true and ejectable is false) -- list of all hard disk drives
repeat with tDisk in hardDisks
try
tell tDisk to set percentFree to (100 * (its free space)) div (its capacity)
if percentFree < minimumFreeSpacePercentage then
set almostFull to almostFull & (get name of tDisk) & ", "
end if
end try
end repeat
end tell
set notEnoughDisks to (count hardDisks) < expectedNumberOfHardDisks
if notEnoughDisks or (almostFull is not "") then
set messageText to "There is a potential problem with the hard disk drives on the server." & return & return & "Details:" & return
if notEnoughDisks then set messageText to messageText & " * A hard disk drive may be missing" & return
if almostFull is not "" then
set computername to do shell script "/usr/sbin/networksetup -getcomputername"
set messageText to messageText & " * The following hard disks may be close to full capacity: " & almostFull & computername & return
end if
tell application "Mail"
activate
tell (make new outgoing message with properties {visible:true, subject:"Warning: Low disk space", content:messageText})
repeat with i in sendToAddresses
make new to recipient at beginning of to recipients with properties {address:i}
end repeat
if sendImmediately then send
end tell
end tell
end if -
How to write an applescript and ignore errors
I'm writing an applescript that uses a shell command that will always return an error. Applescript stops as soon as the error occurs. I want the applescript to continue running. How should I tell Applescript to ignore errors?
The basic construct is a try/end try block which runs your own code when an error occurs rather than stopping your script.
An alternative when using do shell script is to suppress stdout and stderr so that errors are not returned to the application. Which you can do by appending ' > /dev/null 2>&1 &' to the end of the shell command.
Note, though, that your command will not work as written because 'choose folder' will return an alias object which can not be passed to a shell command as-is. Shell commands require unix-style paths for all file/folder parameters. Fortunately, AppleScript makes this easy by providing a POSIX path command which will convert an alias to a unix path. Additionally, since Mac paths can commonly include spaces and other non-shell safe characters, you may want to quote the path, too, like:
<pre class=command>set shell_script to "usr/local/bin/readpst -o " & quoted form of POSIX path of mbox_output & " " & pst_input & " > /dev/null 2>&1 &"</pre> -
Apple script errors. What can i do?
Hi,
i've been getting repeated Apple script errors for 2 different programs. The first is for FLV2iTunes. Its a media converter. The errors is:
AppleScript error GrowHelperApp fot an error: A""" can't got after this class name (-2740)
The other is for a program called visual hub and it says:
Stack overflow (-2706)
Are they related? What can I do? How do i identify and or fix the problem?
I've tried deleting the plist files but that hasn't fixed anythingThe first is a syntax error that looks like a misplaced quote, and the stack overflow error can be caused by creating a list or saving properties that are too large. WIthout actually seeing the script(s) no one here will be able to tell.
-
The action "Run AppleScript" encountered an error.
Hey,
I'm using EOS utility to tether my camera to my computer and take photos. I'm then using the "linked software" option in eos utility preferences to send it my Automator action. Eos utility is pretending that my automator script is an application.
The goal is that automator sends it to photoshop to run a specific action on it and then save it to a folder where I display the photos on a monitor.
However everytime I take a photo I get this error message:
"The action “Run AppleScript” encountered an error. Check the actionʼs properties and try running the workflow again."
Once I click "ok" then the script will continue running and everything works fine.
This is my run applescript that I'm using in Automator:
"on run {input, parameters}
set input to input as text
tell application "Adobe Photoshop CS5"
open file input
do action "GDaction" from "GDset"
end tell
end run"
I assume there is an issue in the run applescript. Can anyone help me revise it to avoid getting this error message everytime?Sorry, I guess I wasn't clear. I don't think you need to cast the file reference to a text string.
Try this:
on run {input, parameters}
tell application "Adobe Photoshop CS5"
open file input
do action "GDaction" from "GDset"
end tell
end run
or
on run {input, parameters}
tell application "Adobe Photoshop CS5"
open alias input
do action "GDaction" from "GDset"
end tell
end run
I'm not sure what is being passed and what photoshop is expecting. -
AppleScript for Viscosity error
I am trying to set up port forwarding using the application Viscosity. I found the following code online which allows me to port forward using Transmission:
set
vpn_ip to do shell script "ifconfig tun0 | grep inet | awk '{print $2}'" # get current ip of vpn interface
set
vpn_port to do shell script "curl -d \"user=MYUSERNAME&pass=MYPASSWORD&client_id=$(cat ~/.pia_client_id)&local_ip=" & vpn_ip & "\"https://www.privateinternetaccess.com/vpninfo/port_forward_assignment 2> /dev/null|grep -oE \"[0-9]+\""
do shell script
"defaults delete org.m0k.transmission BindPort" # delete previous port value
do shell script
"defaults write org.m0k.transmission BindPort " & vpn_port & ""
do shell script
"defaults delete org.m0k.transmission BindAddressIPv4" #delete previously written ipv4binding value
do shell script
"defaults write org.m0k.transmission BindAddressIPv4 " & vpn_ip & "" #write current vpn ip into transmission.plist
I now get the following error status in AppleScript when I try to "run" the script:
error "The command exited with a non-zero status." number 1
Any ideas what this means and how I can fix it and get the script working?I added the lines of script as requested so the script in full now reads as:
set vpn_ip to do shell script "ifconfig tun0 | grep inet | awk '{print $2}'" # get current ip of vpn interface
display dialog vpn_id
set vpn_port to do shell script "curl -d \"user=USERNAME&pass=PASSWORD&client_id=$(cat ~/.pia_client_id)&local_ip=" & vpn_ip & "\"https://www.privateinternetaccess.com/vpninfo/port_forward_assignment 2> /dev/null|grep -oE \"[0-9]+\""
display dialog vpn_port
do shell script "defaults delete org.m0k.transmission BindPort" # delete previous port value
do shell script "defaults write org.m0k.transmission BindPort " & vpn_port & ""
do shell script "defaults delete org.m0k.transmission BindAddressIPv4" #delete previously written ipv4binding value
do shell script "defaults write org.m0k.transmission BindAddressIPv4 " & vpn_ip & "" #write current vpn ip into transmission.plist
(Censored my username and password).
I run the script and get this error:
error "The variable vpn_id is not defined." number -2753 from "vpn_id"
With the first new additional code highlighted "vpn_id".
display dialog vpn_id
I created the .pia_client_id file but running a line of code in Terminal (which was detailed in the oringal thread where I found the script). The code I ran in Terminal was:
head -n 100 /dev/urandom | md5 > ~/.pia_client_id
Thanks so much for your assistance so far, I really appreciate it. -
IE Script error when double clicking on a view in Abap Webdynpro component
Hello experts,
I am running mini SAP trial version 2004 with Internet explorer 7.0 and also installed gui patch 23.
I am making a sample application in SE80 and when double clicking on a view in Abap Webdynpro component I get following error:
<b>Internet Explorer Script Error</b>
An error has occured in the script on this page.
Line: 1
Char: 1
Error: 'wdp_show_menu' is undefined
Code: 0
URL: http://satellite5200:8000/sap/bc/wdvd/painting.html?_vdrespkey=EOJ6V1JQMX0VLTQ7AP6DQM64Y&_vdframe=painting&sap-client=000
Do you want to continue running scripts on this page?
Thanks in advance.
BhupendraHi Bhupendra,
If you are seeing this error in the Se 80 editor , i guess you can ignoire that ...While running the application it will not show any error.
Thanks
Anzy -
When I try to use the print/save as pdf option, I get a scripting error and Firefox usually freezes.
On my MacBook Pro running OS 10.5.8 and Firefox 3.6.13, I am trying to save documents as pdfs under the print window, I get a scripting error and Firefox usually freezes/becomes nonresponsive. This happens every time I tried to perform this task.
This is a fresh install of Windows 7. It is installed on virtual environment on my mac mini using the parallels virtualization application.
I purchased the windows version of dream weaver CS 6 through an online website which I tried to install to my new windows instance. This is the academic version of the Dreamweaver application with a perpetual license that I am trying to install.
I verified my eligibility through adobe which gave me a link to download the CreateiveCloud Set-up program. I downloaded the install program in my windows environment and program and the gave the above error message. Below is a copy of my computers specs. -
I am getting a "script error" when I close out the internet, specifically Firefox. My backup internet explorer does not do this. This is slowing down the process of opening/closing Firefox. When I open Mozilla, I get "restore session" even though I have closed everything down. I have "removed program" and re-downloaded Mozilla 3 times and still this problem persists. What is causing it and how do I fix it?
-> Update All your Firefox Plugins
* https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''
* Restart Firefox
Check and tell if its working. -
Running reports in SCCM: ActiveX Script Error
When I try to run some reports, I authenticate then it throws a Script Error. Error: ActiveX component can't create object: 'Microsoft.XMLDOM'.
This only happens on some reports and it only happens remotely. If I try to run the same reports on the local server, there aren't any issues.Have enabled remote errors?
http://be.enhansoft.com/post/2013/01/16/Enabling-Remote-Errors-in-SQL.aspx
What exactly is the error that your are getting!
http://www.enhansoft.com/ -
Error is as follows: Line: 63 Char: 4344 Error: Unable to get value of the property 'offsetHeight': object is null or undefined Code: 0 URL: http://yui.yahooapis.com/combo?2.8.0/build/yuiloader-dom- event/yuiloader-dom-event.js&2.8.0/build/dragdrop/dragdrop- min.js&2.8.0/build/stylesheet/stylesheet- Do you want to continue running scripts on this page? Y/N buttons."
I see. Well, I just tried to make IE my default browser, but it did not solve the problem. I receive the same script error when I view the image. (I may not have explained this thoroughly enough at first - I do get to view the image after answering the error message, but the print button embedded in the window doesn't work. Before, I never had a problem with viewing or printing.)
I imagine that at this point I will either need to communicate this to the IE people, or possibly revert to an older version of IE. -
Unresponsive script error message keeps popping up, Firefox will not open.
Try to delete the mimeTypes.rdf file in the Firefox Profile Folder.
* http://kb.mozillazine.org/mimeTypes.rdf
* http://kb.mozillazine.org/File_types_and_download_actions#Resetting_download_actions
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder -
As stated previously...I have removed and re-installed Firefox, but am still getting "script error" when shutting it down and going to "restore session" when opening. Please advise what to do about this problem. Thank you.
Firefox 21 and Firefox 22 running on Windows 7 have been reported to take a long time to "wake up" from sleep. I realize hibernation is different than sleep, but... this is the closest match for your description.
Some users have reported that this problem is resolved in Firefox 23 (currently in beta). Others have had inconsistent luck with minimizing Firefox before letting Windows sleep and other measures.
Please check out this (very long) thread for more information: [https://support.mozilla.org/questions/961898 browser freezes after resuming from sleep]
Or jump to the part about Firefox 23: https://support.mozilla.org/questions/961898?page=3#answer-457321
The fact that this just started recently suggests perhaps it is related to another program or update, but I don't think anyone has confirmed the exact interaction that causes the problem. -
Whenever I click on firefox, or when a pop-up occurs, I get a java script error that says, "TypeError: Components.classes[TvtPwmComponent_CID] is undefined". I don't know why. It first occurred while I was on ESPN while trying to watch college games live.
This issue can be caused by an extension that isn't working properly.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Maybe you are looking for
-
I have an older G4 iMac that has a CD stuck in the drive. It keeps trying to boot from the disc, and crashes whenever I turn the computer on. I tried holding down C and also tried Shift to start in safe mode, but it keeps crashing and I cannot eject
-
ITunes COM SDK to sync Audiobook with iOS 5 issue
My application has been using iTunes COM SDK for Windows to add tracks into iOS devices and it's been working for years. Until the recently released iTunes 10.5 versus iOS 5, the added tracks are missing from the iOS 5 devices (iPhone, iPad, etc.). T
-
I need to build a simple process that would handle specific types of documents in SharePoint. Documents would "travel" between folders and would be assigned to different person. Every time a person should get an email, and adds new documents to folde
-
Most recent pdf files open when clicking on one?
Hi, I am having some issues with Adobe Reader (Downloaded 9.1.3). When I select a pdf to open all of my most recent pdf's open at once. I am using Windows Vista. I have uninstalled and reinstalled after a fresh boot. Any thoughts about what could
-
Applying effects to a specific frequency throughout an audio file in Adobe Audition CC
I would like to be able to isolate specific frequencies/sounds like a specific voice with background noise surrounding it. I want to segregate that one sound and locate all frequencies/sounds like that so I can apply clean-up effects to it like incr