Applet not showing in HTML!
Hi all,
For some reason my generated HTML page will not show the applet it is meant to load.
The same HTML file loads simply in the appletViwer though and also in Net Beans!
Any ideas what I can do?
Heres my HTML code, is there something wrong with it?
<html><head><TITLE>Applet HTML Page</TITLE></head><body><h1>crossword v1.1</h1><H3><HR WIDTH="100%">Applet HTML Page<HR WIDTH="100%"></H3>
<p>
<applet code= "crossword4.class" width=500 height=550>
<param name = "one" value = "Erroneous">
<param name = "two" value = "Sightseeing">
<param name = "three" value = "Ambivalence">
<param name = "four" value = "Laborious">
<param name = "five" value = "Secateurs">
<param name = "six" value = "Wonderful">
<param name = "seven" value = "Elf">
<param name = "eight" value = "Inflect">
<param name = "nine" value = "Reeks">
<param name = "ten" value = "Note">
<param name = "eleven" value = "Encum">
<param name = "twelve" value = "Ocean">
<param name = "thirteen" value = " ">
<param name = "fourteen" value = " ">
<param name = "fifteen" value = " ">
<param name = "sixteen" value = " ">
<param name = "seventeen" value = " ">
<param name = "eighteen" value = " ">
<param name = "nineteen" value = " ">
<param name = "twenty" value = " ">
<param name = "twentyone" value = " ">
<param name = "twentytwo" value = " ">
<param name = "twentythree" value = "Ectopic">
<param name = "twentyfour" value = " ">
<param name = "twentyfive" value = " ">
<param name = "twentysix" value = " ">
<param name = "twentyseven" value = "Containing error (9)">
<param name = "twentyeight" value = "Needing or showing much effort (9)">
<param name = "twentynine" value = "Change the pitch of a voice in speaking (7)">
<param name = "thirty" value = "_____ber, to be a burden to (5)">
<param name = "thirtyone" value = " ">
<param name = "thirtytwo" value = " ">
<param name = "thirtythree" value = " ">
<param name = "thirtyfour" value = " ">
<param name = "thirtyfive" value = " ">
<param name = "thirtysix" value = " ">
<param name = "thirtyseven" value = " ">
<param name = "thirtyeight" value = "Away from its normal position (7)">
<param name = "thirtynine" value = "Visiting places of interest (11)">
<param name = "fourty" value = "Having conflicted attitudes or feelings toward something (11)">
<param name = "fourtyone" value = "Clippers for pruning plants (9)">
<param name = "fourtytwo" value = "Extremely good or remarkable (9)">
<param name = "fourtythree" value = "Tiny being in the form of a human, usually full of mischief (3)">
<param name = "fourtyfour" value = "Smells strongly (5)">
<param name = "fourtyfive" value = "Brief written record of something (4)">
<param name = "fourtysix" value = "Large expanse of sea (5)">
<param name = "fourtyseven" value = " ">
<param name = "fourtyeight" value = " ">
<param name = "fourtynine" value = " ">
<param name = "fifty" value = " ">
<param name = "fiftyone" value = " ">
<param name = "fiftytwo" value = " ">
</applet></p><HR WIDTH="100%">The source.</body></html>
I think it crashes because one of your parameters is wrong.
Without the applet and or a full trace I don't know.
To turn the full trace on (windows) you can start the java console, to be found here:
C:\Program Files\Java\j2re1.4...\bin\jpicpl32.exe
In the advanced tab you can fill in something for runtime parameters fill in this:
-Djavaplugin.trace=true -Djavaplugin.trace.option=basic|net|security|ext|liveconnect
if you cannot start the java console check here:
C:\Documents and Settings\userName\Application Data\Sun\Java\Deployment\deployment.properties
I think for linux this is somewhere in youruserdir/java (hidden directory)
add or change the following line:
javaplugin.jre.params=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
for 1.5:
deployment.javapi.jre.1.5.0.args=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
The trace is here:
C:\Documents and Settings\your user\Application Data\Sun\Java\Deployment\log\plugin...log
I think for linux this is somewhere in youruserdir/java (hidden directory)
Similar Messages
-
Applet not showing in browser OR appletviewer window not appearing
hi
1. I have small java code - hello.java
import java.awt.Graphics;
public class hello extends java.applet.Applet
public void paint(Graphics g)
g.drawString("Hello java...................",600,300);
which correctly compiled
2. then I wrote an html file - hello.htm
<HTML>
<HEAD>
<TITLE>HELLO</TITLE>
</HEAD>
<BODY>
<appllet code="hello.class" width=400 height=400>hello not supported
</appllet>
</BODY>
</HTML>
3. but F:\javacode>appletviewer hello.htm not showing appletviwer window
command prompt move to F:\javacode>
4. opend the hello.htm through browser, "hello not supported " appearing instead of applet
5. both files in same folder
6. I am using IE8 & firefox (XP sp2)
whQuite apart from which a String drawn at [600, 300] wouldn't be visible in an Applet of width 400.
db
edit
Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
Edited by: DarrylBurke -
Issue in Lion re Graphics Not Showing in html Email Signature
After I upgraded to Lion, I created an html signature with the graphics portion residing on Dropbox, and it worked without a hitch until about 10 days ago. Then a question mark in a blue square started appearing sporadically in place of the graphic. Now, in place of the graphic, I'm getting that question mark in a blue square 100% of the time in place of the graphic on Dropbox. The .webarchive file in my -/Library . . . mail/signatures folder that no longer reveals the graphic in my emails, however, works fine when opened up in Safari. I've tried rewriting the code, but it's of no avail. The files open up beautifully in Safari with the graphic, but in the signature box in Preferences and in the emails themselves, it's that blue box that keeps showing up. Does anyone have any idea why I'm not able to access my graphic from mac mail and how I can fix the problem?
Thank you very much in advance for your assistance.As of two days ago, I am having basically the same problem as described:
imap account on my University, it always synced just fine with my iphone. Two days ago it stopped pulling new messages from the server, and moreover, it also does not show the recent ones it showed already, but only shows me approx. 100 really old messages (6 month old).
Whenever I sync, it pretends to do it (sync date gets updates), but it does not fetch the messages.
On my desktop and on my ipad2 (EXACT SAME SETTINGS), everything is ok, messages are pulled from the server (just as it was ok on my iphone two days ago, and I did not change anything).
When I go to the desktop, and move a new message (one this is not showin up on my iphone) to a subfolder of inbox or to the trash folder, then I suddenly can see this message also in the subfolder or in the trash on my iphone.
I have deleted the account and set it up anew, same result: the same 6 month old messages get uploaded, and that's it. I can delete also these old messages, and then they are gone, but also this does not pull up any additional messages.
Any ideas?
Oliver -
Graphics in applet not showing
Hi
I am new to applet making. I am using some jpgs in my applet for menu purposes.
I have put the images in the jar file in the correct directory but the images are not showing up.
but if i actually put the jpgs in the directory of the jar files it shows up.
my question is .. how can I make the images show up with out having to actually have them in a folder but just have them in the jar files.
ThanksJust use the archive attribute of the applet tag point
to your jar file e.g
<applet code=someclass archive="somejar.jar" width=xx
height=xx>
</applet>I am using the archive attribute.
and I made sure my graphics are in the right directory.
I also tried putting them in same directory as the classes and changing my code.
But they still don't show up.
Thanks for you help! -
Smartshapes not showing in html 5 output
I generated a html5 output from captivate 6. Some of the smart shapes are not showing in the output. They are however visible in the swf output. Why could this be?
In addition the effects added to the smart shapes do not occur.There were quite a lot of issues with shapes in HTML output in CP6. Sorry, but doubt a little bit that you'll find a workaround. Cannot you use images instead of shapes?
-
Metadata Not Showing on HTML Pages
Hi
I have notice that all the metadata PAGE DESCRIPTIONS are absent form all the sites lately. What happened to them? Most of my customers have used the SEO PAGE TITLE and PAGE DESCRIPTIONS for pages, blog post, and products, but there are not being employment and it seems to hurt there rankings at search engines. Any thoughts?
Thanks in advance, TeejayCMYK color space?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Joe Makowiec" <[email protected]> wrote in
message
news:[email protected]..
> On 18 Aug 2006 in macromedia.dreamweaver, bob.garrett
wrote:
>
>> I have a number of jpgs which have been supplied by
a number of
>> companies which will not show on a web page. In
Dreamweaver you do
>> not get a preview and when the page goes live you
get the old box
>> with a red x as if the file is not there.
>> But if I open any of the files in Photoshop or
Photoeditor etc and
>> simply resave then it all works. It is as if the jpg
format is not
>> recognised by web browsers and Dreamweaver but is
recognised by
>> Photo editors and then if resaved by the Photo
editor is then back
>> in an understandable format by Browsers.
>> Any ideas?
>
> There are a number of possibilities:
> - They weren't uploaded
> - They were uploaded to the wrong directory
> - They are on a case-sensitive server, and there is a
case mismatch
> between the link to the file and the actual filename
> - You are running blocking software, and something about
the file
> (filename, directory name, image dimensions) trips the
blocking software
>
> If you post a link to the page, somebody may be able to
offer you more
> insight.
>
> --
> Joe Makowiec
>
http://makowiec.net/
> Email:
http://makowiec.net/email.php -
Applet not showing on browser even if its loaded
I have created an applet which has some textfields and buttons.
But when i want to see the applet in browser , it says it has been loaded but shows nothing. i have used swing for applet creation.
help me out of this.What browser? What HTML code?
Email me and I'll send you an article I've written on this subject. It is NOT as simple as it was 10 years ago.
You'll need to use <APPLET> for macintosh, <EMBED> for MSIE and <OBJECT> for Netscape/Mozilla/Firefox/Opera. Then you'll need to understand 'code=' (see my reply to CleopatraL). -
Applet now showing in HTML Page
Hello
I have created an applet using Eclipse IDE. When i run it from Eclipse IDE it works fine. But i tried to embed that class into an HTML File then it is not loading and showing class definition not found error.
Need help on this Urgently
My Java class is within a Package.
My Html file is outside that package folder and i have given the correct path and correct class name and so it is accessing the class allright.
but loading is the problem.
THanks for the ReplyNeed help on this Urgently
Might be an idea to provide enough information to find the problem, then.
it is not loading and showing class definition not found error
Which class is not found?
My Java class is within a Package
Which package?
i have given the correct path and correct class name
Which path? Which class name?
and so it is accessing the class allright. but loading is the problem
You're getting 'class definition not found.' So clearly there's at least one class it's not accessing alright.
Post your applet tag, your actual class and package names, your error detail and a description of your folder structure. Otherwise there's not a lot anyone can do. -
Applet not showing in browser/only getting a grey box
Hell to all....
I am using a trial version of MS J++ and every time i execute to the browser i dont see my output all i get is a lil grey box on left side with header rules (<hr> tage in HTML) surounding the box. Can anyone help me out???
if you need my code i will post it.
Thanks in advance!OK ABUSE, check this out
this is what i'm trying to do....The boss just wants me to connect to our database...and that's it....all i want to do is to see if i can connect to our database....so all the code is suspose to do is say database connected if it did and if it didn't then it should say connection failure...here is the code once again this is the code and that's it....
import java.awt.*;
import java.awt.event.*;
import java.sql.*;
import java.applet.Applet;
public class Test extends Applet
public static final String DB_URL = "jdbc:microsoft:sqlserver://<IP HOST>";
private Connection conn;
public void init(){
try {
DriverManager.registerDriver(new com.microsoft.jdbc.sqlserver.SQLServerDriver() );
//Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver").newInstance();
this.conn = DriverManager.getConnection(DB_URL, "user", "pass");
Statement stmt = conn.createStatement();
catch (SQLException e){
System.out.println("Cannot open database connection: " + e.getMessage());
System.out.println("Connected to database");
hope you understand what i'm trying to do.... -
Network-manager-applet not showing up in gnome-panel
I've installed it, but it doesn't show up in the list of things to add to the panel. Adding the "notification area" item doesn't do it either. What am I stupidly forgetting?
Um...ps -e | grep "nm" returns this:
1678 ? 00:00:00 nm-applet
1730 ? 00:00:00 nm-system-setti
Is there something other than those two that should be running? How would I check? -
Java applet not showing up in Internet Explorer 8
Hi,
I have an applet tag in a JSP, and it is not working in Internet Explorer 7 and 8.
Yes, I have read that the applet tag was deprecated - the problem is that it is working for my colleague, also in IE8.
Java is enabled on my machine/IE options.
Could anyone please suggest what the issue might be?
Thanks.I haven't tried resizing the applet yet. Since you all mentioned it I am going to play with that later today.
To elaborate on the fix, yes - updating to Java 6 - 16 will allow IE 8 to display applets.
Just in case anyone else runs into this issue as well:
I am running Vista on a 64 bit.
It has two directories named Program Files:
One named just "Program Files" - evidently for the 64 bit stuff.
Another named something like "Program Files (x86)".
Apparently it will look into "Program Files" - the 64 bit one by default.
I haven't found a 64 bit version of Java 6 - 16 to install - the only 64 bit one is some version of 1.5, unless I am missing something, so the Java 6 - 16 installed into the Program Files(x86), and 1.5 into Program Files. Windows pointed JAVA_HOME to 1.5 because it looks into the Program Files by default.
The result was that when I went to the Java site it analyzed my Java version and told me I have the most up to date version. But -
java -version on the console returned 1.5. Confusing at first, but on such systems, apparently the JAVA_HOME has to be explicitly repointed to the (x86) Program File directory. -
Oracle Reports 6i - image do not show on html
Hi,
I am using Oracle Reports 6i, on Windows 2000.
I am running the reports from a Java Web application using RWServlet. The reports are just fine if I use PDF as DESFORMAT, but the images are not shown if the DESFORMAT is html.
The architecture is with the application running on a different server than the Reports Server and the Oracle 8i database, which reside on the same machine.
Any idea, why?
Thanks,
PaulWhew...lot's of questions...let's see if I can help (at least a little)...
1. Quite possibly, the user is/was pulling the image from the database? I do this in my environment, so it might be worth a look.
2. You should be able to print in any format from the web. You may need to adjust your destype/desname/desname parameters.
3. Only thing I can think of here is that maybe the original report was not written using a standard web-friendly font?
4. There's a couple of ways you can get data into an excel file:
A. Use DDE and poke the data right into it (messy when you need to print the regular Oracle report too).
B. Add an option to print to file and set the desformat to DELIMITEDDATA. Be sure to go through the data model and set Exclude from XML Output to 'Yes' for fields you don't need. Also, be aware that this may not come out in the same order as they do on the printed report. You can read about this on Metalink.
Hopefully that helps you a little bit. :)
Chad -
Styles are not showing in html mail
Hello all,
i have a servlet that sends a mail in html format. i have a string with all the html tags, and the first part of the string is as follows:
String htmlText = "<html><link href='styles/styles.css' type='text/css' rel='stylesheet'>....here gos the rest of the html tags.
i receive the mail properly, but seems that the styles are not working....any help?
ThanksBecause the link to your stylesheet is a relative URL, and in an e-mail there's no base URL for it to be relative to. Using a fixed URL like http://yourhost.org/styles/styles.css would probably work.
-
Hiya,
Not sure if I should be posting here or on the Dreamweaver forum [there's a similar post there], but ..
I hope to have some music on my site and have been playing around with various Flash based, XML driven, mp3 players [though I'm a beginner with Flash].
I've got one to look [more or less] as I want it but it doesn't work! It works when previewed within Flash CS4 but not within Dreamweaver. The mp3 [the Josephine Foster song] is there, the XML file is there - I can't think what I've done wrong.
Here's the url: http://www.stevedrake.net/player.html
Thanks in advance.
steveWhat is the folder structure for the html versus the Flash versus the xml file versus the mp3 file?
When the Flash file is placed loaded into the html file, the files it loads have to be referenced as if it is in the same folder as the html file (because it essentially is when it loads into that file). -
Hi,
I have an applet which works fine in Windows XP. I have called this applet from both, WSAD and from an HTML file. It works fine in XP.
Though, the same code, with the same JDK installed, doesnt work in Windows 2000. When loaded from a WSAD, it works fine, but when loaded thru a HTML, it asks to install JVM. However, after installing, the problem doesnt get solved. It again asks me to install JVM.
What could be the possible solution for this?
ThanksSome of these may be useful:
http://www.google.com/search?num=100&hl=en&c2coff=1&sa=X&oi=spell&resnum=0&ct=result&cd=1&q=preload+java+applet&spell=1
Maybe you are looking for
-
Routine (ABAP Code) in Transformation for the below sceaniro
Hi Experts, Please update me with the routine (ABAP)(transformations) Source Char: Policy Start Date: ZSTRT_DTE (CHAR:Data Type: DATS) Target Char: Policy Expiry Date: ZEXP_DTE (CHAR:Data Type: DATS) FM: FIMA_VTBKOND_CALC_DATES Months(I_MONTHS) = 6 U
-
K8n neo2 platnum memory soundcard problems.
I just recently bought this board and im having problems with it. here is what I have installed. windows XP home edition (all updates installed) AMD 64 bit 3500+ (4) 512 meg sticks pc 3200 underclocked to ddr 333 (mushkin blue) liteon dvd rom drive (
-
my jsp file is : <jsp:useBean id="user" class="com.mycompany.DelData" scope="page"/> <HTML> <BODY> <b> Your Data Deleted<BR> <% user.del(); %> </BODY> </HTML> And the DelData.java file is: package com.mycompany; import java.sql.*; public class DelDat
-
Disapointed with my MacBook ... happier with my iBook.
Hi all, So .... maybe the subject is a bit of a stretch. I love the form factor of the Macbook, as well as the speed. This thing screams .... 2.0ghz, 2gig ram, 7200rpm drive ... you wouldn't expect anything less. Current disapointments: 1. The WHINE
-
Hi All: I have an applet which calls a servlet for some XML data. I am allocating buffer space on the applet side based on Content Length that comes from the. weblogic server. First problem is in servlet/jsp th