Applet popping up in own window, not showing in browser

Hello,
I have created an applet which is, by nature, supposed to load in the browser window.
In my case, it loads, but not in the browser, in its own window, outside of the browser.
Any ideas?
Haig

It sounds like you're adding your components to a Frame and then setting it visible. If you want your applet to be embedded in the browser, you have to add your components directly to the applet itself.

Similar Messages

BBC iPlayer window not showing on MAC OS X LION

I tried unistall and reinstall, but iPlayer window not showing no more. It did work before.

Hi, i've fixed it now. I had to remove the BBC iPlayer folder from the library and then reinstall it. But what i did not know was in MAC OS LION the library is now hidden. Thats why i could not follow the instructions on BBC iPlayer website. But it works back to normal now thanks.

History is blank! does not show any browsing history even changing the settings v 3.6.20 Mac OS

Regardless of the settings you choose, Firefox is not showing any browsing history. It's happening in version 3.6.20 for Mac as well as V 5 for windows. I see a lot of the same questions on the internet but no answers

I'm on Linux. There is no QuickTime for the Linux platform, but I see the player loading (caching) that movie. The Gecko Media Player doesn't seem to be able to play that file embedded, but does play it if I open the .mov file directly in the player.
Another good place to ask questions and advice about web development is at the MozillaZine Web Development/Standards Evangelism forum.
The helpers at that forum are more knowledgeable about web development issues.
You need to register at the MozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=25

Rapport does not show in browser

I use Trusteer Rapport as extra security on my Windows 7 Firefox browser, I cannot find why it does not show in browser bar, I have checked my Trusteer Rapport software, and can find no problem, so I am thinking this is being stopped by Firefox security as I have just updated Firefox to V5 and Rapport was working in the bar before. Any info I can use?

Report "xi" does not bundle with any version of .NET. Please find out the exact version of CR, version of .NET and CR updates you are working with.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Applet not showing in browser OR appletviewer window not appearing

hi
1. I have small java code - hello.java
import java.awt.Graphics;
public class hello extends java.applet.Applet
public void paint(Graphics g)
g.drawString("Hello java...................",600,300);
which correctly compiled
2. then I wrote an html file - hello.htm
<HTML>
<HEAD>
<TITLE>HELLO</TITLE>
</HEAD>
<BODY>
<appllet code="hello.class" width=400 height=400>hello not supported
</appllet>
</BODY>
</HTML>
3. but F:\javacode>appletviewer hello.htm not showing appletviwer window
command prompt move to F:\javacode>
4. opend the hello.htm through browser, "hello not supported " appearing instead of applet
5. both files in same folder
6. I am using IE8 & firefox (XP sp2)
wh

Quite apart from which a String drawn at [600, 300] wouldn't be visible in an Applet of width 400.
db
edit
Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
Edited by: DarrylBurke

Calling a subpanel, pops up in own window instead of sub panel when there is an error

Hi all. I am working on my first real LV project for my company, and I am having some problems. The main one right now happens when I am trying to call a subVI into a subpanel. It shows up in the subpanel just fine when the program starts, but when there is an error in the error handler it skips over the invoke method and pops my subVI in its own window. Anyone have an idea on what I am doing wrong? I have included a picture of how I am trying to populate the subpanel.
Attachments:
subpanel.jpg ‏59 KB

robot_mower_guy wrote:
but when there is an error in the error handler it skips over the invoke method and pops my subVI in its own window.
I assume you have an error handling case in your state machine. So if an error happens in your error handler, you will have be passing that error around the shift register. Yes, that will mean that the invoke node ot insert the VI will not run due to the error. You need to handle your error from the error handling state.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Windows not showing. Page source and library windows open but not showing.

I select View --> Page Source and no window appears. Under the Window menu, the item Source: . . . shows but no window. If I close the main window then the item is ticked but still no actual window.
I have disable all extensions and plugins, safe mode, revert all preferences.
the same happens with Show all Bookmarks. This is why I posted this under bookmarks problems originally - see below.
I now find the same happens to downloads and Error console windows. No problems in Safari or MS Word (usually the worst performer)
Bookmarks are all present, but show all bookmarks produces no window, even though the window menu shows an item and I can select it.
Mac OS 10.6.8 FF 5.01 Show all bookmarks shows no window, even if I close the main window. Under window menu the 'Library' item is ticked but still nothing. I have restarted, and renamed places database. recently installed some of these addons

The one that solved it was my own last post, which does not have a Solved it.
I copied the FF profile folder from another login and started with that.
However. . . the problem is back. I installed extensions, NoScript and MyBookmarks and it seemed OK after that.
Then I installed Download Youtube videos + 3.3.51, then DownThemAll! 2.0.7, Google Shortcuts 2.1..6, ImTranslator, QuickWiki and Read It later. No Plugins ennabled.
when I disable all extensions then the windows for downloads, error console and 'open link in new window appear OK, but not the source or Library windows.
As before they are on the window menu but no way to make them visible.

ICal window not showing

When I start iCal the window is not showing. There is a menu bar that I can interact with plus any dialogs it generates through selections.
Any ideas?
Thanks,
Mike.
macbook pro Mac OS X (10.4.8)
macbook pro Mac OS X (10.4.8)

Mike,
Tutorial: Preferences Files: The Complete Story, by Ted Landau:
Parts I & II, Part III, Part IV, and V is a very good .plist file explanation.
My short version: Property List (.plist) files contain instructions for recording and executing tasks associated with the the application or function that owns them. They can and do become corrupted. If you look in the ~Library/Preferences Folder you can usually guess what application or function the .plist serves by analyzing the file name. In your case I suspected com.apple.iCal.plist
Proper identification of the appropriate .plist is not always so obvious, but com.apple.iCal.plist is the preference file for iCal. When an application malfunctions, removing the associated .plist file from the preferences folder to the Desktop is often the best first troubleshooting step.
If you have a problem with an application, Quit the application, find the associated plist file in the Preferences Folder, and move it to the Desktop as a first step in your troubleshooting procedure. Then log out/in or restart and re-evaluate the performance of the application.
A new default .plist file is automatically created in your Preferences Folder after you remove the recalcitrant .plist and initiate the log out/in restart sequence. You can expect default application behavior and you will have to reset some preferences. If the application or function returns to normal after removing the .plist file, it will prove that the original file was corrupt, and you can now safely trash the .plist file which you placed on the Desktop.
If the application or function is unsatisfactory, the original copy of the plist file which was placed on the Desktop can be safely returned to the preferences folder. Just allow the system to replace the newer plist.
If you are having problems with any aspect of OS X, experiment with deleting the appropriate .plist file. Plist corruption is common and .plist file deletion often cures many problems. Too many users try intricate solutions first and end up complicating their problem.

Mac to XP. Windows not showing up in Sidebar. And mystery computer.

Hello. I'm trying to establish a small connection between my Mac and my mothers PC, she often have problems with it, and it is low on HD space, so I thought I could use my Mac as a storage kind of thing.
Anyhow, the PC does not show up in sidebar, and I can't connect using Go > Connect to Server > smb://192.168.1.3
I don't know why.
One computer is listed under shared, it is called joellundborfc48, and I have no idea what it is.
The PC connects to my Mac just fine, but not the other way, sadly.
My router is a Mici Broadband Router model KN-S1060.
Any help is appreciated.
Trying to connect via ethernet LAN, no wireless here.

If you have a Mac:
http://support.apple.com/kb/TS1591
For Windows:
http://support.apple.com/kb/TS1538

Windows not showing up in Startup Disk

Just updated a 15" Retina to 10.8.3 and also ran the SMC 1.1 update. Now my bootcamp windows partition does not show up in the Startup Disk any more. I can see it in the Finder and I can reboot and hold down option key to boot into Windows, but for some reason it isn't showing up in Startup Disk Preference.

yeah, I had a feeling it might be Tuxera causing it, wanted to see if there was another solution other than uninstalling it.
I tried disabling it in the pref pane and that didn't fix the issue, so I'm assuming it would need to be uninstalled.
As long as I am able to boot into Windows when needed (which isn't very often), I'm not too concerned. Its a little inconvenient to have to hold Option during startup to do it, but it works.
Whats annoying too is that when using BootCamp control panel in Windows to restart into OSX, it boots into the emergency partition for Lion instead of Lion. So, guess holding Option at startup is the only option both ways!
Thanks for the help.

Safari main window not showing up in my user account when launched

Safari main window is not showing up when launched in my user account.
For some unknown reason, there must be a bug with Space and Safari as when I switch from Space 1 to Space 2 (and vice versa) I can see the Safari main window for less than 1 sec but could not fix it to show up and stay in the foreground in any of the 4 Spaces areas.
I have tried to desactivate Space or change some settings in Space but could not fix the issue.
Last but not least, Safari is working well for all other user accounts on my Mac.
I have updgraded my OS to 10.5.7 and Safari v4 last patch but I have the same issue for 1 month

HI and Welcome to Apple Discussions...
Try deleting this file. com.apple.safari.plist
/Users/YourName/Libary/Preferences. Drag that file from the Preferences folder to the Trash, empty the Trash and restart your Mac. See if that helps...
Carolyn

Finder window not showing

After upgrading to Lion, I am no longer able to use cmd+Tab to go to the Finder windows. However, when I am shifting between spaces, I am able to see all the finder windows in the background. SImilarly, if I am using expose, I can see all the Finder windows, but am unable to click and navigate to them. Any thoughts? I am no Power user. So, pardon my ignorance.
Thanks in advance.

I have the same problem of invisible finder windows on a Mac Book Pro.
Shortly:
I cannot open any finder window (to access files and folders) in any way after a Mac Book reboot.
Tried by clicking a finder icon in a Dock
Tried by clicking a New Finder Window menu
Summary of other indicies of the problem
The problem of the invisible finder windows has appeared after an upgrade from Snow Leopard to Lion 10.7.2
The problem still persists in the same manner after an upgrade to the latest Lion 10.7.3
The finder window shortly shows up when sliding between "desktops" when using the "three finger scroll gesture", but it is not manipulable, and disappears when the screen settles on the next "desktop".
But Finder knows about all its open windows even though they are not not visible on a desktop. All windows are listed as an items inside the Finder Window menu. But clicking and of that window items has no effect ..... the related window still does not appear.
This problem appears after a reboot of the Mac Book ..... when the Mac Book is powered up and Mac OS X is freshly launched.
But ..... in the Dock ..... When I change the Option state ("All Desktops", "This Desktop", "None" values) in any way, all invisible finder windows suddenly appear. After that action opening and closing all other finder windows works well ..... until the next reboot of the Mac Book.
The problem appeares only within my Standard User login account (Czech language). It does not appear within an Admin User login account (English language). Opening and closing finder window works well within an Admin User login account from the beginning without any problem. I do not know, whether it is related to languages or not
I have performed Disk Permission Verifications several times, but without any effect.
I have also deleted the "~/Library/Preferences/com.apple.finder.plist" file several time and also without any effect ..... I have been deleting from a Terminal of the Admin User login account when Standard User login account is logged off ..... and of course I have deleted the file related to the Standard User login account.
Thank you very much for some usefull hint.
With my best regards

My own locations not showing up on map

Hi,
I'm creating my own locations for geo-tagging when iPhoto09 does not offer a suggestion. This is working fine and I can add the newly created location to an event.
However, when I start locations and get the map overview, only the locations that were automatically offfered by iPhoto show up on the map. My own locations do not show up with a pin.
In the konsole.log I see the following entries:
28.01.09 10:49:09 iPhoto[1162] Couldn't connect to remote host
28.01.09 10:49:09 iPhoto[1162] Failed to connect to 'place.apple.pushpin.com:80'
28.01.09 10:50:24 iPhoto[1162] Couldn't connect to remote host
28.01.09 10:50:24 iPhoto[1162] Failed to connect to 'place.apple.pushpin.com:80'
Curious, as all other features work just fine.
Just the showing of my own locations seem to be broken.
I am in corporate network with a local proxy running on my Mac that handles the communication with the corporate proxies. When I type the URL in my Safari, I get a connection just fine.
Seems like only for the mapping feature iPhoto tries to bypass the proxies and does not get a connection.
Can anybody help or confirm my suspicion?
Thanks a lot,
Carsten

However, when I start locations and get the map overview, only the locations that were automatically offfered by iPhoto show up on the map. My own locations do not show up with a pin... Can anybody help or confirm my suspicion?
Can only confirm that on a dedicated, non-network system I am getting "pin" locations as long as at least one photo is associated with a pin. Pins without associated photos do not show up on the "Places" initialization map but do still show up on the "Manage My Places" map.

Print preview window not showing page to be printed

My wife and I just downloaded Firefox to our new Macbook Airs with Lion. The small preview box in the print layout widow does not show the page being previewed. In addition, the selected print windows are not holding from print session to print session.
I love Firefox on my old Mac, so please help us resolve this problem.
Pete
[email protected]

Sean, I was importing directly from the camera to Lightroom. I might add that I have been using this same procedure for a couple of years now and only within the past few weeks have the problems come up and if I made some change somewhere along the line I certainly have no idea what the change was. As I have mentioned before in some of this forums communications, when I imported directly from a card reader outside of the camera, everything was just as it should be and yet up to a couple of weeks ago, I could import directly either from the camera or a reader card with the same perfect results. (This is from my Canon XTi as I do not have a card reader yet for the G10) I would assume a card reader will work as well for the G10 and so I have ordered one and hopefully this will be a rather simple solution to the problem. As John had indicated in one of his messages he occasionally liked to import directly from the camera and I echo that as I do also.
Bob

Pop up window asking if I want the password remembered won't pop up why I'm not in private browsing and the site is not on the exception list please help

I can not get the firefox window to ask me if I want my password remembered. I am not in private browsing. The site is not on the exception list in the security box where all the other passwords sites are stored.

See also;
*http://kb.mozillazine.org/User_name_and_password_not_remembered
If disabling autocomplete=off doesn't help then start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Applet popping up in own window, not showing in browser

Similar Messages

Maybe you are looking for