Calling a subpanel, pops up in own window instead of sub panel when there is an error

Hi all. I am working on my first real LV project for my company, and I am having some problems. The main one right now happens when I am trying to call a subVI into a subpanel. It shows up in the subpanel just fine when the program starts, but when there is an error in the error handler it skips over the invoke method and pops my subVI in its own window. Anyone have an idea on what I am doing wrong? I have included a picture of how I am trying to populate the subpanel.
Attachments:
subpanel.jpg ‏59 KB

robot_mower_guy wrote:
but when there is an error in the error handler it skips over the invoke method and pops my subVI in its own window.
I assume you have an error handling case in your state machine. So if an error happens in your error handler, you will have be passing that error around the shift register. Yes, that will mean that the invoke node ot insert the VI will not run due to the error. You need to handle your error from the error handling state.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

I cant call to a mobile number since yesterday, but can receive call from the same number. I am using iphone 4s. Is there any setting error?

I can't call to a mobile number since yesterday, but still can receive call from the same number. I am using iphone 4s. Is there any setting error?

you have to make sure that CFWD Bridge Mode under the Line tab of the SPA9000 where the SPA400 is registered is set to ALL...include VMSP Bridge and XFER Bridge Mode as well..power cycle then check if you are still getting one-way audio
| isolate! isolate! isolate! |

Applet popping up in own window, not showing in browser

Hello,
I have created an applet which is, by nature, supposed to load in the browser window.
In my case, it loads, but not in the browser, in its own window, outside of the browser.
Any ideas?
Haig

It sounds like you're adding your components to a Frame and then setting it visible. If you want your applet to be embedded in the browser, you have to add your components directly to the applet itself.

Searches pop up in new window instead of tabs now

In the last couple weeks, if I do a search on my homepage MSN, the results show up in a new window instead of a tab like they used to. It doesn't happen with any other page, ie Google, Yahoo, AOL, etc. I contacted MSN and they say it is a Firefox issue.
I checked in my options and I have the option set to open new windows in tabs instead but it still keeps happening. It wasn't doing this a couple weeks ago when it didn't before.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How to make menu/list (form) item open in it's own window instead of blank one?

Items in a form (list/menu) that I've created are opening in a blank window (pop-up) when clicked. I would like them to open in "self" mode so that pop up blockers on various computers don't become a challenge for site visitors. Can anyone please tell me how I could make that adjustment using Dreamweaver? I am a novice (if that) in coding, so if there is a design view solution that would be absolutely awesome. Any assistance to get me on the right track would be GREATLY appreciated!! BTW I also made the form a library item (just in case that fact is needed). Also if you need to see the actual link it is
http://www.graphicmechanic.com/DEKALBCOUNTY/index.html. The "I WANT TO" list is the part I'm referring to.
I am also attaching 3 files (the .lbi file, the template and the page both are applied to).
I tried a couple of things already. One was javascript, but I still seemed to have problems, the others were selecting the form and changing the target to self. Another developer said that I would need to apply the target attribute to each link, but I am having trouble doing this.

No. They removed that functionality as an improvement to iTunes in version 11. I saw one person mentioning making a screen grab of the window and displaying it as an image in Preview while looking at the actual iTunes in another window, but it doesn't quite strike me as being the same...
http://www.apple.com/feedback/itunesapp.html

When I call VI on Linux from Teststand on Windows using TCP/IP I get "file not found error".any sugeestions?

I am trying to execute a VI running on Linux from Teststand running on windows 2000 prof ,both running on two different machines.I used TCP/IP for the interface using the following steps on Labview VI:tools>options>VIserver>TCP/IP and gave the ip address of both the machines.When I gave the file path as c:\home\test.vi in Edit labview Vi call window(the Vi in linux is stored in /home/test.vi)and also in remote vi path:/home/test.vi,I get a file not found error.The teststand version is 3.0 and labview is 7.0.Any idea why this is happening and any solutions?

priya guru,
Here is a knowledge base that addresses your question: �How do I call test VIs that reside on a non-Windows platform from TestStand?�
You also need to set TCP/IP Access found in Tools->Options->'VI Server: TCP/IP Access'. Make sure that you list the IP address in the Access List to allow TCP/IP access to that machine. Finally you need to specify which VIs are accessible to remote applications. Open up Tools->Options->'VI Server: Exported VIs' and provide paths to the VIs you wish to be remotely accessible.
I have attached an example VI that demonstrates VI Server in action. Please post back if you are still having problems. Good luck!
Cr
aig H.
National Instruments
Attachments:
Remote_Run_--_VI_Server.zip ‏88 KB

I have uninstalled and reinstalled and Firefox for windows 7 will not open. There is no error message--it just doesn't open, even in safe mode. What do I do?

My computer is set to auto update for Windows 7 Home Premium and for Microsoft Office Professional Plus 2010. I am also running Norton 360. There was a major update for Office on 12/10/14 that seems to be when my problems started. This month, every time my updates have caused a reboot, Mozilla has failed to open. I have uninstalled it and reinstalled it several times, and it has only lasted a day or two before it crashes again. This last time it will still not open. All the instructions to troubleshoot seem to be based on the idea that the program is open and just has issues. I can't even get it to open up in Safe Mode.
I have tried to reinstall, and it says that it will launch automatically when the install is complete, but it is not working. Since Norton scans every download before it runs, I'm not certain if that is where the problem is since I never get the window that shows the step by step installer for Firefox.
What do I need to do?

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. A clean reinstall is not the same as a regular reinstall performed using the built in installer. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from [https://www.mozilla.org mozilla.org] (or choose the download for your operating system and language from [https://www.mozilla.org/firefox/all/ this page]) and save the setup file to your computer.
#After the download finishes, close all Firefox windows (or open the Firefox menu [[Image:New Fx Menu]] and click the close button [[Image:Close 29]]).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
WARNING: Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These cannot be easily recovered unless they have been backed up to an external device! See [[Back up and restore information in Firefox profiles]]. 
Please report back to say if this helped you!
Thank you.

I just upgraded Firefox, and now it's opening new windows instead of news tabs when I click on links. It's driving me nuts. How do I get pages I click on to open in new tabs instead?

I'm using Firefox 3.5.14, and had no similar problems with an earlier edition.
I believe I've already selected the "open in new tab" option. Am I missing something?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Windows 7 prompting dual boot when there is no other OS

When I boot my machine I get prompted about which OS to boot, either "earlier version of Windows" or Win 7. I find this pretty strange as I formatted the HDD during the Win 7 RC1 installation. When I try to boot the "earlier version" I get an error message about some missing file naturally, as the OS doesn't exist. How does the boot sequence detect OSes and how can I edit them so I won't have to encounter this promt on every startup?

Try running Startup Repair from the installation DVD to repair this. To do it, boot from the DVD...select "Next" at the first screen...Select "Repair this computer" in the lower left of the next screen.- John

I cannot open Firefox. I see "firefox" at the top of the window but no other tools. There is an error message that won't go away. I click okay but it just keeps coming back. The message is nonsensical - gibberish.

I've run every diagnostic and "fix" at my disposal and the problem continues. When I click to open Firefox I get a message that is only partially on the screen - upper left hand corner - and when I click okay the entire message shows up. It's still in the upper left hand corner but just keeps reappearing every time I click okay. Error says:
[JavaScript Application]
Error on adding toolbar element:
NS_ERROR_UNEXPECTED, Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nslPrefBranch.getCharPref]

I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
Edit: I just removed every project I have from the Media Browser. Still no luck.

Applet loading through browser, but showing in its own window

Hello,
I have created an applet, which talks to a servlet.
This servlet then talks to a DB, and returns information to the applet to process and display.
Everything works fine, except that the applet loads it's own window, instead of displaying in the browser.
Any ideas?
Haig

The answer is probably somewhere in your applet source code.
Can you post the code here, so I can have a look at it? Otherwise it's difficult to answer.
BTW - it's nothing to do with the fact that it connects to a servlet. If you don't want to post the whole applet, maybe I can tell from just the init() method.
Also - what browser are you using?
Yours, Mike H..

How do I get playlists to pop out into their own windows in 11?

I Think I could live with 11, if I could get playlists to pop up in their own windows. That How I create playlists, I have it side by side with my library.. there has got to be a way where you can still do that, right? I'm terrified of going back a step, because I don't want to reinstall 80,000+ MP3's and if I lose my hundreds of playlists, that's 8 years work down the drain!

You will need to connect from the headphone out jact to the input for the speaker on the monitor. The Video cable does not carry audio.

SetCookie Javascript call from applet pops up the launcher browser window

Hi,
With Jre 1.5 we started seeing a strange problem.
From our applet code at the end of loading the applet we call a setcookie on our parent browser window (Browser window used to access our html/applet page).
Once we make this call the browser window comes on top of our applet window.
This was working fine earlier, with jre 1.5 we started seeing this issue. Any thoughts?
A workaround is to call the toFront() function on the applet window's mainframe and set it in the front again. I was wondering if any one have seen similar problem.
It happens only with IE on windows, no issue on netscape/mozilla.
Thanks
RT

this is now resolved. My call to the transaction was slightly incorrect. This is now the working code:
CONCATENATE 'http'
'://' host ':' port
'/sap/bc/gui/sap/its/webgui/?~transaction=*MIR4 RBKP-BELNR=5105600751' ';DYNP_OKCODE=SHOW'
into url.

How to pop-up Outlook Email window with To: blank?

Hi All,
I currently have a page which shows multiple rows with checkboxes. I have an After Submit process which loops through the rows and stores some values of the checked rows into a variable to be used as the body of an email. I then call apex_mail.send() to send the email.
Instead of prepopulating a TO: address within the process and have it send automatically, I would like to have Outlook pop-up the email window with the body prepopulated as mentioned above but with the TO: address box null so that the user can select the address from Outlook's Address Book.
Any help/advice would be greatly appreciated!
Thanks,
Jason

1: Yup.. It would look something like this:
<a href="mailto:?body=aslkdjldfks">Open Email</a> the # should read:
"mailto:?body=aslkdjldfks"
2: If you go this route, there are a few things you need to remember:
The mailto tag is client side. So you would have to generate the javascript on the server and print it out on the client.
If your users do not have Outlook, or another mail client, this will do nothing.
If you have a really long message body it will not work.
If you have weird characters you will need to encode these.
So, if you still think that the mailto is what you need then here is some javascript that will auto open it for you:
http://www.webmasterworld.com/javascript/3290040.htm

Screen x,y control of a simple pop-up Confirm mini-window. Possible?

Is it possible to control where on the screen an small confirm pop-up window will appear?
I want not to appear in the middle but next to the right screen side.
Do I need to build it and not use the default confirm window?

You would need to create your own window, as an example...
var w = new Window('dialog','Test');
var tmp =$.screens.toString().split('-');
var screenSize=tmp[1].toString().split(':');
var windowWidth = 300; //adjust to suit
w.frameLocation=[Number(screenSize[0])-windowWidth,Number(screenSize[1])/2];
w.t1 = w.add('statictext',undefined,"This is a test");
w.bu1 = w.add('button',undefined,'Cancel');
w.show();
This will create a window with the top of the window half way down the sceen, and to the right of the screen. The only problem is you have to enter a fixed number for the width of the window (var windowWidth = 300;)

Calling a subpanel, pops up in own window instead of sub panel when there is an error

Similar Messages

Maybe you are looking for