AppleWorks crashes for one user only

Hello,
If I open AppleWorks in my user account, then start a new word processing document, it crashes the program as soon as I begin typing. It does not do this when logged in under other user accounts.
I've tried removing a recently installed program, verified disk permissions and done a disk repair, all to no avail.
Any suggestions?
Bisged

Welcome to Apple Discussions Bisged
It's likely that you have a unicode keyboard layout selected. See my user tip, Since upgrading to Tiger AppleWorks quits when I type.

Similar Messages

Photo Booth crashes for one user, not another.

Just upgraded to Lion, 10.7.1. On a 2007 iMac, Photo Booth works fine with one user. But switch to another account and it crashes every time after asking to create a new photo library. Any suggestions?

From What I've found.. it seems 3ivx or Perian could cause this problem. A friend had this issue and deleted 3ivx and it fixed his crashes. Alternatively, some folks are reporting that turning off 32-bit mode (Get Info) for Photobooth has also fixed, although this was already turned off in my friend's case. Or if you have iGlasses installed.

Flash Player works for one user only

Running IE7 under Vista. Have one other user on laptop with Vista. I am the Administrator.Since downloading latest version of Flash Player it will work on my log in but not when the other user is logs in.
No error message. Simply all Active X items appear as box with a red X. Have checked the Security settings for both users on IE appear the same.
Tried Adobe Support chat service but all they could do was direct me to a Forum.
Any help will be appreciated.

This has come up multiple times over the last few months. There has been a solution posted somewhere in this forum, but I don't remember what it was.
Try searching the forum for "limited user" or such; hopefully you will find it.

Park document not Triggering for one user only

Hi Guys,
I have a problem where one user is using FBV1 park document and WF i not triggering at all and if the same user create document for any other company the WF is going through. Any idea Why..
Thanks
Atul

Hi,
Check for the start conditions (if any) maintained regarding to the document type or company code etc..
This will give an idea about the issue.
Regards,
Manikandan R

Finesse hangs at "signing in" for one user only

I have a single user account that is having issues. Yesterday we temporarily deleted his UCCX extension off of his phone, which pulled it out of the IPCC Extension field for a few minutes while we were making phone changes. Even after adding it back and setting him back up in UCCX, he is still having this issue
When he tries to log in, it hangs at "signing in".
Notes:
UCCX 10.5
User account/password are correct - we can use them to sign into the CUCM Self Care Portal page
It happens regardless of which PC we try to sign him in on. Other UCCX users can sign in on those same systems (under the same Windows profile) without issue.
We have emptied his IPCC Extension field in CUCM to pull him out of UCCX then added it back and added him back to his team/skills, but it still hangs at "Signing In"
The user is also an administrator and can use those credentials to log into the UCCX Administration page and make changes, verifying that UCCX is passing credentials correctly for the user.
While hanging, he does not show up in my Finesse Supervisor Team View page so the system does not see him as logged in.
The RMCM application user in CUCM is associated with his phone.
Any thoughts on what might be causing this?

Hi,
Make sure the correct extension is defined in CUCM Admin/User Management/End User/IPCC Extension. Also, I would try removing and re-associating the device to the RMCM Application User.
Regards,

Deluge and KDE - displaying incorrectly for one user only

My deluge (and possibly other gtk apps) are being displayed incorrectly in KDE. You can see the screenshot attached, but the thing I mostly notice is the progress bar. On my laptop, as well as any other user account on the PC in question, it's a very blue progress bar (so 100% torrents will be all blue, 0% no blue, and obviously in between as % increases). In the past I've messed with various gtk/kde rendering apps (so that gtk apps will display "correctly" in KDE), but I don't currently have any installed. I also have rm'ed the configs in question per the wiki ( https://wiki.archlinux.org/index.php/Un … plications ). I have tried removing the deluge config for my current user and it still doesn't "fix" the issue. I've gone through kde system settings to setting all display options to default-type options (which is what my laptop is set to).
Just wondering if anyone had any thoughts on where I could look to fix this? It's mostly an annoyance, but I've been trying to fix it for a while now so thought I'd finally ask for some help.
EDIT: I realize this should be in the Desktop/Apps sections, so if a mod could move it for me, that would be much appreciated.
Last edited by vladthedog (2013-12-05 18:08:10)

1. You said the projects were all saved "to a shared folder." Do you mean THE Shared folder? Your Mac's Users folder should list two Users, plus a folder named "Shared". Is that the folder you mean?
2. The trouble is that an iMovie project isn't actually a file. It's a special kind of folder called a package, which contains other files and folders. (To look inside the package, Control-Click on the package icon and choose "Show Package Contents" from the popUp menu.)
3. When YOU are the user and you create a new iMovie project, the package and everything it contains is configured with you as the owner. You are the designated owner of all the items that comprise the project. No one else can Write to the project.
4. To change that, you have to change the project package into a normal Finder folder, adjust its permissions and the permissions of all the contents of that folder, then change it back into an iMovie package.
Here's how:
In the Finder, choose Finder > Preferences. Click Advanced and turn ON "Show all file extensions".
The name of your iMovie project "My Sample Project" is now displayed as "My Sample Project.iMovieProject" in the Finder.
Remove ".iMovieProject" from the project name, removing the period. When the Finder asks, say OK.
The project package has now turned into a folder. Select the folder and choose Get Info.
Set Others permissions to "Read & Write". Then click "Apply to enclosed items". When the Finder asks, say OK.
Select the folder name again and add the extension ".iMovieProject" to the name. The folder will change back to an iMovie package.
The package will now allow anyone to Read and Write to the project.
Karl
PS: This solution isn't very handy, obviously, but it does the job. A better solution is to buy an external hard drive, and configure it to Ignore permissions. (In the Get Info window for the disk.) That lets both users save projects to the drive without permission issues.

One project won't open for either user, another will open for one user only

My wife and I are new iMovie users. I have imported three projects (#1-3) from our camera, she has imported two projects (#4 & #5) - all to a shared folder. The first project I imported (#1) cannot be opened by either of us. In addition, my wife cannot open the second project that I imported (#2). We get the following error: "The project could not be opened, because the disk is full, the folder is locked, or the folder permission are incorrect." We can both open projects #3-5.
I have checked the permissions settings on all 5 projects. All are same, Read and Write priveleges for both of us. Anybody seen this before? Am I missing something?
G5 Mac OS X (10.4.6)

1. You said the projects were all saved "to a shared folder." Do you mean THE Shared folder? Your Mac's Users folder should list two Users, plus a folder named "Shared". Is that the folder you mean?
2. The trouble is that an iMovie project isn't actually a file. It's a special kind of folder called a package, which contains other files and folders. (To look inside the package, Control-Click on the package icon and choose "Show Package Contents" from the popUp menu.)
3. When YOU are the user and you create a new iMovie project, the package and everything it contains is configured with you as the owner. You are the designated owner of all the items that comprise the project. No one else can Write to the project.
4. To change that, you have to change the project package into a normal Finder folder, adjust its permissions and the permissions of all the contents of that folder, then change it back into an iMovie package.
Here's how:
In the Finder, choose Finder > Preferences. Click Advanced and turn ON "Show all file extensions".
The name of your iMovie project "My Sample Project" is now displayed as "My Sample Project.iMovieProject" in the Finder.
Remove ".iMovieProject" from the project name, removing the period. When the Finder asks, say OK.
The project package has now turned into a folder. Select the folder and choose Get Info.
Set Others permissions to "Read & Write". Then click "Apply to enclosed items". When the Finder asks, say OK.
Select the folder name again and add the extension ".iMovieProject" to the name. The folder will change back to an iMovie package.
The package will now allow anyone to Read and Write to the project.
Karl
PS: This solution isn't very handy, obviously, but it does the job. A better solution is to buy an external hard drive, and configure it to Ignore permissions. (In the Get Info window for the disk.) That lets both users save projects to the drive without permission issues.

Firefox 31.0 has lost functionality for one user only. No menu dropdown. Win 8.1.

The primary user has no problems and nor did the second user until yesterday when, returning after a break, Firefox opened with a new tab, no menu bars and no menu button drop-down screen. If I clicked on Alt+menu bar or bookmarks bar, they appeared temporarily. It worked if I typed a url into the search box and I could add bookmarks but they would disappear on shutdown.
I have tried a reset through Profile Manager and, in desperation, deleted the user completely. After rebooting the PC and creating a new user, Firefox behaves exactly the same way, except that all the bookmarks have been deleted.
The primary user still has no problem with Firefox but it seems there is some basic problem with the addition of a second user.
I would greatly appreciate any suggestions.

The folder for the second user may have corrupt files in it.
'''https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles'''
Use the Profile Manager to create and remove Firefox profiles
Firefox stores your personal information and settings in a profile folder. Learn to use the Profile Manager to create, remove, rename, and switch profiles.
Create a new user profile. Does it work? Copy the contents of the old profile
but '''ONLY''' add-ons, history, passwords. '''Do Not''' copy any data files.
'''https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile'''
Recovering important data from an old profile

Parental Control not logging for one user only

Hi, my two kids have parental control turned on for their individual accounts. On one account I get logs of their activity, the other I do not inside parental control preference pane. I found in the account that does not get logged the following:com.apple.familycontrols.overrides.plist.
Anyone know what this is and why it might be in that account?
Also any ideas as to why one account would not be getting logged?
I can see the details in her user account inside Library/applicationsupport/apple/parentalcontrol.
Imac G5, 2gb ram, 10.5.6

The familycontrols.overrides property list interests me, especially because I can't find any information on it! Looking at its contents suggests that it is a temporary file created whenever an admin authorizes the managed user to exceed their daily login time limit (e.g., 30 minutes extra).
As for the not logging problem, I have it too. It seems to me that events.data -- the actual log -- is too large at 54 MB and am deleting it. (I note that it was updated at the time the managed user last used his account, so something is being recorded.) Wish me luck.

"This field name is not known" error, for one user only, in test environment only.

Crystal Report 11 being called from BOXIR2 Infoview.
The field name is included in two formulae in the report - no errors in Dev or Production, just in test.
Any ideas why this is occurring?
Thanks!

Hi Helen,
The best way to test this will be to open the report in question in Crystal Reports designer on the test BOE server.
In Crystal Reports, verify the report is using the desired connection then do a Database|Verify database. If the report errors then we know there is a difference in the table/fields it's reporting off of.
Regards,
Wallie

Value help does not work for ONE person only !

Hi,
we have a strange problem. In the Web IC, we are using a standard value help for the country field for a Business Partner. This works fine for everyone (ie, it picks up the country and slots it into the field) except one person. For her, it never returns any value into the country field. We are guessing that it's not Web IC related but is something in her browser settings etc...but haven't been able to pin it down. Can anyone offer any advice on this ?
thanks for looking.
Malcolm.

Hello Malcolm,
If this error occurs for one user only it's definitely related to the clients PC.
Did you already delete all temporary files and the cookies on that PC? Usually this does the trick!
If this does not solve the problem, try to let that particular user login on another PC where the problem does not occur. (If the error does occur on another PC too it's probably profile/authorization related)
Hope this helps!
Regards,
Joost

Tacacs authentication fails for one user account for only one switch

Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
              Socket opens:        157
             Socket closes:        156
             Socket aborts:        303
             Socket errors:          1
           Socket Timeouts:          2
   Failed Connect Attempts:          0
        Total Packets Sent:       1703
        Total Packets Recv:       1243
          Expected Replies:          0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
Prasey

Hi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad

Firefox crashes on start up for one user but not another

Crash ID: bp-df3a48d7-363c-4d2f-87d3-f73902140723
Version: 31
Crashes on start up for one user but not another. Both are administrators.
I have uninstalled and re-installed. No change with each user.
Crashes in safe mode as well (holding down shift)
No addons present in other user.
Have ran Malwarebytes and cleaned
Have ran CCCleaner and cleane all including registry entries with Firefox uninstalled.

Create a new profile as a test to check if your current profile is causing the problems. <br>
See '''Creating a profile''':
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem <br>
'''Profile Backup and Restore'''
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

In Linux, my firefox uses the /etc/firefox profile for all users, now I need ONE user only to start with their own profile, I'm struggling to achieve this, please help!

In Linux, my firefox uses the /etc/firefox profile for all users, now I need ONE user only to start with their own profile, I'm struggling to achieve this, please help!

.Jake. wrote:
I forgot to say that the hard drive has not been used yet...
So you have no backup of your data at all?
Pete

I want to install an app but only for one user on my imac with Lion

I have 2 users on my mac. I would like to install some apps (iwork) but only for one user and not the other user. How can I do this?

Setup of iWork in your wife's account should only occur the once.
Updates can be performed through your account and are usually performed via Software Update.
Messages should not be popping up in your wife's account if all the iWork updates have been performed.
Go to Software Update and download and install all the iWork updates.
Unless you keep OSX up-to-date, messages will continue to come up when your wife logs into her account.

AppleWorks crashes for one user only

Similar Messages

Maybe you are looking for