Application builder for Lab View 8.6.1 , 2009 SP1 and 2010 SP1

All 3 Versions seem to have huge flaws. With 8.6.1 When trying to build and application I get a duplicate name error and the application won't work. With 2009 SP1 I get Error 1003 broken VI when I have no broken VI's. Again Application won't work! With 2010 SP1 After the application is built for some reason lab view can no longer find the Excel sub VI's no matter how I place them in the build. And again application doesn't work. With all 3 versions the Vi's and over all programs work perfectly in the development environment. The application builder seems extremely flawed.
I would currently like assistance with 2009 SP1 problem the Error 1003 broken VI. I have reinstalled and rebooted my machine several times , tried including as much as possible in the build and still get the error about a broken VI. That works perfectly in the development environment. Please HELP?
Thank You
Attachments:
Broken VI.gif ‏8 KB

Scott,
Good afternoon, I'm sorry to hear you are having problems working with the application builder, hopefully I can help you get to the root of this problem.
What steps have you taken to try and resolve the error? This error can be caused by a variety of things. The link below details 8 potential solutions that may help resolve your error.
http://digital.ni.com/public.nsf/allkb/705C2ECA081F3C7986256C0F00559B02?OpenDocument
I would recommend starting with these steps. Let me know if any of these solutions work for you.
-Nick-
Nick C | Staff LabVIEW Platform Product Support Engineer | National Instruments

Similar Messages

How to develop simple time based ramp driver for lab view VI

how do I develop simple time based ramp driver for lab view VI

Here it is converted to LabVIEW 2010. However it is missing the AO and AI read and write vis since I don't have that package.
Attachments:
SRI_TimeProportion.vi ‏70 KB

Looking for lab view example

My application consists of collecting data from a bank of sensors as pressures and tempratures vary. I would like to run a lab view VI that tests the sensors, varies the environment and keeps track of all results, sorting them into good and bad. Each sensor needs to be tested in different pressures, then the temprature increases and the pressure test begins again. If there is a lab view example that might be able to get me started, I really need to find it. Thanks for any and all help.

There are a number of examples that ship with LabVIEW and their usefulness will depend on information not specified in your questions - such as what version of LabVIEW you have, what type of DAQ card(s) you have, and if you are using any SCXI hardware. If you open LabVIEW and go to Help >> Find Examples, you can search through a number of different examples.
For the application it sounds like a good place to start would be with an Acquire to Spreadsheet type of file that reads, graphs, and logs data. From there, depending on what you mean my using the card to vary the environment, you can find other examples of AO and DIO to perform these type of functions. These examples will give you a good starting place as to how a LabVIEW program works and the general flow
that you will need to follow.
Also, depending on your other needs, you might considering looking into examples with triggering to enable you to control when your program starts.
Regards,
Michael
Applications Engineer
National Instruments

Where do I find the VISA installation drivers to add to my application builder for my LabVIEW app?

I need to add the VISA installation drivers to my LabVIEW application builder, but I don't know where to locate them. (I found the instructions on adding the drivers, but it didn't tell how to find them: http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/e09ba0e2f31d304f86256a640070058e?OpenDoc ument)

The following webpage contains the NI VISA drivers that you can download:
http://digital.ni.com/softlib.nsf/display?ReadForm&lookup=NI-VISA&view=current&node=132060_US
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect

Best type of NOx Analyze for Lab View.

My company is looking to buy a NOx Analyzer. What type of Analyzer would be best to use with Lab View.
It need to read CO, CO2, NO, NO2, and NOx.
It would also help to get an idea on the set up also.

Measure is an add-on for Excel and not a board for generic questions. You should repost to someplace more appropriate (i.e. LabVIEW or Instrument Control).

Application Builder for labVIEW 7 Doesn't support any report generation function

I'm Using LabVIEW 7.0 to build an application My Application is exporting data to an excel report. the vis were working great until i tried to creat an .EXE file. The application is working fine but when i try to generate the report nothing happens.
So, I decided to test the report generation functions alone (New Report.vi, Append report text.vi and Dispose Report.vi). The Problem Still there, the .EXE file takes no action when i attend to generate a report. any suggetions please.

Shady Yehia wrote:
> I'm Using LabVIEW 7.0 to build an application My Application is
> exporting data to an excel report. the vis were working great until i
> tried to creat an .EXE file. The application is working fine but when
> i try to generate the report nothing happens.
>
> So, I decided to test the report generation functions alone (New
> Report.vi, Append report text.vi and Dispose Report.vi). The Problem
> Still there, the .EXE file takes no action when i attend to generate a
> report. any suggetions please.
Another possible reason besides of possible path problems: Are you
running that application on the same computer? If not you need not only
to install the Runtime-Engine (automatic when you create an installer)
but also the Report Active X support.
To include that into the installer
you go into the Installer Settings Tab, then press the Advanced button
and make sure that you check the NI Reports Support checkbox before
creating an application build.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

CIP Safety Driver for Lab View available

Hello, does anybody know if there is a CIP (Common Industrial Protocol) Safety driver is available for LabView? CIsP Safetey is based on the Ethernet IP Protocol. Does anybody know a third party manufacturer of a CIP Safety driver for LabView? Has anybody experience in using CIP Safety Protocol in LabView? Please help. Thanks

There's no drivers for that in the NI Instrument Driver network, and the company's web site doesn't seem to have anything, though this is not that big of a surprise. Given that it has C++ commands it's quite likely it's calling functions in a DLL. If that's the case, you can create LabVIEW wrapper functions for the DLL functions. Can you tell if it's using a DLL? This information would likely be in a programming sub-manual, or a section in the user manual dealing with programming. Given the type of device it's also possible that it might just be talking to it directly via TCP/IP. Can you provide a code snippet that is in the manual, or a link to the manual?

Error: LabWindow CVI driver for Lab View 2011 (using hp4145a)

What is the DLL for the Agilent hp4145a instrument driver?
I am trying to convert the LabWindows/CVI Agilent hp4145 intrument driver for use in labview 2011, but keep getting errors related to an incorrect DLL.

Hi Courtney L.,
Your prompt response is much appreciated. Thank you.
I have attached the "hp4145 LabVIEW Wrapper Conversion Report" as a txt file
- this report was automatically downloaded along with the"LabVIEW Instrument Driver Import Wizard (LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers)" *(link listed below), and popped up at the end of the installation.
If any specific details or a screenshot will also be of benefit to solving this problem, I will be able to post them by tomorrow night.
*Link for Instrument Driver setup download:
https://lumen.ni.com/nicif/us/infolvinstdriver/content.xhtml
Attachments:
LabVIEW_Wrapper_Conversion_Report.txt ‏6 KB

Application Build for Imac G5

Hi All
I am again in a bit of a situation here ! I just built an appplication in cocoa and am trying to run it on an IMAC G5 . The development environment is IMac INTEL CORE 2 DUO TIGER and XCODE and the application is running fine on the iMac G4 with tiger or leopard on it . I have user universal binaries while building the application . However not the application doesn't run at all on the iMac G5 (ppc). I need some help as to how to proceed and is there anything special which has to be done for the iMac G5 .
Any help would be highly appreciated.
Thanks .

I am not familiar with that widget. However, I would guess that it has not been updated to run on the latest version of OS X.
Barry

Error 7 in "application builder" for LabVIEW 8.5.1

Hello,
I am getting an error while building a project for making EXE file.
below is the displayed message.
Error 7 occurred at Copy in New
VILibrary.vi->AB_Dest_LLB.lvclass:Create_Destination.vi->AB_Build.lvclassLCreate_Destinations.vi
->AB_Build.lvclasss:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_BUild.vi->AB_Build_Invoke.vi->A
B_Build_Invoke.vi.ProxyCaller
============================
NI-488: Non-existent GPIB interface.
C:\ProgramFile\NationalInstruments \LabVIEW8.5\vi.lib\Utility\libraryn.bin
thanks,

You can force LabVIEW to recompile the entire VI hierarchy in your project with CTRL+SHIFT+Run Button.
Have you imported some old VI's into the project? From a previous version?
Did you add files since creating the build parameters? You may want to delete the build parameters and create a new one.
RayR
Message Edited by JoeLabView on 07-02-2008 08:35 AM

How to create a dll file for lab view?

Hello
I want to create a DLL file for LabView. Can anyone help me in this issue?
Regards
Vivek

Please explain.
Do you want to create a dll in another language (which one?) for use in LabVIEW or do you want to create a dll out of your LabVIEW code?
LabVIEW Champion . Do more with less code and in less time .

Weird problem for lab view

My program runs normally this moring.
But when I open it this afternoon, it is so weird. I try to set up acquire data time. But I can not put number like 0.5. I just can put integer. Also. When I try to input 0.5, it autamatically changed to 05 I can not type dot in it
What is wrong?
Thanks

Good to see you back on the forum Charles. Hope all is well..

Application Builder Applications List View Detail - Parsing Schema

When viewing all applications in the Application Builder using the View Detail option the list of applications is shown with the Parsing Schema showing APEX_040100 or APEX_040200 according to the apex version. Shouldn't it show the actual schema that the application will use?

Prabodh wrote:
Hi,
How will Apex know the actual schema without getting into the code and analyzing it?
I meant just showing the actual "parsing schema" which is set for the application, not all the possible schemas the application may actually reference. The parsing schema is one of the parameters asked for when importing an application. It is also defined in the application definition.
A workspace can have any number of schema assigned to it, other than the Default Parsing one. So, the only other option would be to list all the assigned schema. Which in my opinion (and most probably in the mind of the designers of Apex as well ) will be an unnecessary long list.In my opinion it seems unnecessary and fairly useless to show the APEX schema (APEX040100, APEX040200) when listing a few details of the application. Just wondering if it is on purpose or an overlooked bug.

How to include Instrument drivers in Lab-view apps builder

Hi,
I am using Labvier 7,1, I have managed to use the Application builder for a simple program, but have problems with a larger program that includes P & P instrument drivers (for GPIB)
I can create an installer, but when I try & install it, I get a great number of errors, all relating to being unable to find all the vi for the Instrument driver functions.
I tried several variations, including support files, & including the instrument driver dll's from C:\vxipnp\winnt\bin\
this time I got app f.ailed to start , needs VISA32. dll was not found.
I had expected there to be a standard way of using applications Builder to include GPIB p & P Instrument drivers, guess I'm nieve, being a newbe. Any help will be greatly appreciated
Mikesub

The app builder prior to 8.x was only designed to install the application you created. The actual instrument driver VIs should be included in the app but the IVI driver itself (the low level dll) is not. You should really include the installer for the IVI driver and not just the dlls. This is the .msi file that is on the instrument driver download page. If you are getting an error about VISA32, then it sounds like VISA was not installed either. I usually install VISA and NI-GPIB from the CD that comes with the GPIB board and I do this when I install the board into the computer. However, you can also include these installers with your app as well. On the Installer Settings tab, click the Advanced button. You have the option there of 'Run executable after installation'. The simplest thing to do is to create a .bat file that will call the other installers you include with the distribution. Don't forget that you also need the IVI Compliance Package so include that installer as well.

I nead help in finding Lab View drivers for some instruments

Hi to you all
I am looking for some drivers for some instruments ( the list is add ), i have trayed to look for them in the NI site ( Search Instrument Driver Network - http://sine.ni.com/apps/we/niid_web_display.drv_search ) but with no luck - the specific instruments drivers were not there.
I trayed to look for the same instrument series but again with no luck
I tryed to look for the Lab View drivers at the HP site and Agilent site but the drivers that thay have are not ! Lab View drivers but self developed drivers for the instrument.
If someone maybe has one or more of those drivers, if someone know of a site that i can find one or more of this Lab View drivers or any help at all in finding this Lab View drivers will help me a lot
thank you all in advance
SKI FARM
Attachments:
The instruments List .doc ‏23 KB

I agree that Christian is sending you in the right direction. I think you should be able to find about 75% of the instruments that you listed. Some you will not find and will have to develop the drivers yourself. There is a wizard in LabVIEW 8.X to help you with that.
I know from experience that several of the instruments that you listed do have drivers, so keep trying.
Hope that this helps,
Bob Young
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

Application builder for Lab View 8.6.1 , 2009 SP1 and 2010 SP1

Similar Messages

Maybe you are looking for