Application Builder for labVIEW 7 Doesn't support any report generation function

I'm Using LabVIEW 7.0 to build an application My Application is exporting data to an excel report. the vis were working great until i tried to creat an .EXE file. The application is working fine but when i try to generate the report nothing happens.
So, I decided to test the report generation functions alone (New Report.vi, Append report text.vi and Dispose Report.vi). The Problem Still there, the .EXE file takes no action when i attend to generate a report. any suggetions please.

Shady Yehia wrote:
> I'm Using LabVIEW 7.0 to build an application My Application is
> exporting data to an excel report. the vis were working great until i
> tried to creat an .EXE file. The application is working fine but when
> i try to generate the report nothing happens.
>
> So, I decided to test the report generation functions alone (New
> Report.vi, Append report text.vi and Dispose Report.vi). The Problem
> Still there, the .EXE file takes no action when i attend to generate a
> report. any suggetions please.
Another possible reason besides of possible path problems: Are you
running that application on the same computer? If not you need not only
to install the Runtime-Engine (automatic when you create an installer)
but also the Report Active X support.
To include that into the installer
you go into the Installer Settings Tab, then press the Advanced button
and make sure that you check the NI Reports Support checkbox before
creating an application build.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

Error 7 in "application builder" for LabVIEW 8.5.1

Hello,
I am getting an error while building a project for making EXE file.
below is the displayed message.
Error 7 occurred at Copy in New
VILibrary.vi->AB_Dest_LLB.lvclass:Create_Destination.vi->AB_Build.lvclassLCreate_Destinations.vi
->AB_Build.lvclasss:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_BUild.vi->AB_Build_Invoke.vi->A
B_Build_Invoke.vi.ProxyCaller
============================
NI-488: Non-existent GPIB interface.
C:\ProgramFile\NationalInstruments \LabVIEW8.5\vi.lib\Utility\libraryn.bin
thanks,

You can force LabVIEW to recompile the entire VI hierarchy in your project with CTRL+SHIFT+Run Button.
Have you imported some old VI's into the project? From a previous version?
Did you add files since creating the build parameters? You may want to delete the build parameters and create a new one.
RayR
Message Edited by JoeLabView on 07-02-2008 08:35 AM

I have a application build in labview 8.5 for Windows XP using NI Visa functions to interact with hardware , how to make is work in Windows 7 32 bit and Win 7 64 bit

I have a application build in Labview 8.5 which wroks fine with Windows XP , this program uses basic read /write functions of NI Visa to communicate with Hardware . This application doesnt work with Windows 7 32 bit/64 and Vista . What changes i need to do to make it work for the said operating system

srinivas wrote:
Sorry for confusion ,
My question is what changes i need to do in code or while making the installer to make the existing program work with other Windows operating system
You need to make sure the machine have the corresponding NI-VISA installed. Check in the NI software pages for the right version.
Also make sure that the com port's can be selected when you first start the application. Eg. if you refer to VISA "COM1" on the XP machine It might be "COM2" on the Win7 machine.
Br,
/Roger

TS4002 Can you tell me if the smtp settings have changed recently? I use me/ICloud mail with Outlook and can not receive emails but outgoing emails are no longer working. Error message is: Authentication failed because Outlook doesn't support any of the

I am able to receive messages on my IMac using Outlook but am unable to send. I've had no trouble in the past but began receiving the following messages today.
5.7.8 Bad username or password (Authentication failed).
Authentication failed because Outlook doesn't support any of the available authentication methods.
I am able to send messages using this account on my IPhone and IPad so the IMac is the only place I am having issues. Any advice?

Here are the correct settings. They have never changed since iCloud debuted a year ago.
Server information
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud.

Authentication failed because Outlook doesn't support any of the available authentication methods.

When attempting to check and send email from my Mac via iCloud, I keep getting the error "Authentication failed because Outlook doesn't support any of the available authentication methods." I have change just about everything I can see available, but continue to get this message.
I am able to send email via iCloud using my .Me and .Mac adresses, and that tells me that it is not able to store "sent emails" on iCluud and will store them loaclly on my computer. I can handle this, but whem going to iCloud Web page haave nothing withing the "sent" mailbox.
Using OS 10.7.2, and Outlook 2011 version 14.1.3
Thanks in advance......

I got the following from the microsoft Web site. Also, the SMPT port must be overwriten. Use port 587
This article contains information about the compatibility of Microsoft Outlook for Mac 2011 and Apple iCloud. Outlook for Mac 2011 does not support Apple iCloud calendar (CalDAV) and contact (CardDAV) synchronization. Outlook for Mac 2011 does support iCloud Mail. For steps on how to configure your iCloud email account in Outlook for Mac 2011, go to the "More Information" section of this article.
To configure your Apple iCloud email account in Microsoft Outlook for Mac 2011, follow these steps:
Start Outlook 2011.
On the Tools menu, click Accounts.
Click the plus sign in the lower-left corner, and then select E-mail.
Enter your E-mail Address and Password, and then click Add Account.
Note: The new account will appear in the left navigation pane of the Accounts dialog box.
Enter one of the following in the Incoming server box:
mail.me.com (for me.com mail addresses)
mail.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Incoming server box.
Enter one of the following in the Outgoing server box:
smtp.me.com (for me.com mail addresses)
smtp.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Outgoing server box.
After you have entered the incoming and outgoing server information, Outlook 2011 will start to receive your email messages.
Note: You can click Advanced to enter additional settings, such as leaving a copy of each message on the server.

2011 outlook gives the following error: "Authentication failed because Outlook doesn't support any of the available authentication methods."

Upgraded my computer to 10.9.2 Mavericks and now my 2011 outlook gives the following error: "Authentication failed because Outlook doesn't support any of the available authentication methods." Anybody know how to fix it? Thank you.

I got the following from the microsoft Web site. Also, the SMPT port must be overwriten. Use port 587
This article contains information about the compatibility of Microsoft Outlook for Mac 2011 and Apple iCloud. Outlook for Mac 2011 does not support Apple iCloud calendar (CalDAV) and contact (CardDAV) synchronization. Outlook for Mac 2011 does support iCloud Mail. For steps on how to configure your iCloud email account in Outlook for Mac 2011, go to the "More Information" section of this article.
To configure your Apple iCloud email account in Microsoft Outlook for Mac 2011, follow these steps:
Start Outlook 2011.
On the Tools menu, click Accounts.
Click the plus sign in the lower-left corner, and then select E-mail.
Enter your E-mail Address and Password, and then click Add Account.
Note: The new account will appear in the left navigation pane of the Accounts dialog box.
Enter one of the following in the Incoming server box:
mail.me.com (for me.com mail addresses)
mail.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Incoming server box.
Enter one of the following in the Outgoing server box:
smtp.me.com (for me.com mail addresses)
smtp.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Outgoing server box.
After you have entered the incoming and outgoing server information, Outlook 2011 will start to receive your email messages.
Note: You can click Advanced to enter additional settings, such as leaving a copy of each message on the server.

Application builder for labview 4.1

I have a legacy application that compiles with 4.1 but does not with 6.1. We had application builder for 4.1 but only have access to Applications builder 6.1 at this time. Where can I get a copy of Application Builder 4.1?

I would contact NI's Sales group. I highly doubt that it is still available, but it's worth a try. You can reach them at 512.683.0100.
J.R. Allen

Where do I find the VISA installation drivers to add to my application builder for my LabVIEW app?

I need to add the VISA installation drivers to my LabVIEW application builder, but I don't know where to locate them. (I found the instructions on adding the drivers, but it didn't tell how to find them: http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/e09ba0e2f31d304f86256a640070058e?OpenDoc ument)

The following webpage contains the NI VISA drivers that you can download:
http://digital.ni.com/softlib.nsf/display?ReadForm&lookup=NI-VISA&view=current&node=132060_US
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect

Application builder for Lab View 8.6.1 , 2009 SP1 and 2010 SP1

All 3 Versions seem to have huge flaws. With 8.6.1 When trying to build and application I get a duplicate name error and the application won't work. With 2009 SP1 I get Error 1003 broken VI when I have no broken VI's. Again Application won't work! With 2010 SP1 After the application is built for some reason lab view can no longer find the Excel sub VI's no matter how I place them in the build. And again application doesn't work. With all 3 versions the Vi's and over all programs work perfectly in the development environment. The application builder seems extremely flawed.
I would currently like assistance with 2009 SP1 problem the Error 1003 broken VI. I have reinstalled and rebooted my machine several times , tried including as much as possible in the build and still get the error about a broken VI. That works perfectly in the development environment. Please HELP?
Thank You
Attachments:
Broken VI.gif ‏8 KB

Scott,
Good afternoon, I'm sorry to hear you are having problems working with the application builder, hopefully I can help you get to the root of this problem.
What steps have you taken to try and resolve the error? This error can be caused by a variety of things. The link below details 8 potential solutions that may help resolve your error.
http://digital.ni.com/public.nsf/allkb/705C2ECA081F3C7986256C0F00559B02?OpenDocument
I would recommend starting with these steps. Let me know if any of these solutions work for you.
-Nick-
Nick C | Staff LabVIEW Platform Product Support Engineer | National Instruments

Several question s about runtime Engine, application builder and labview player

I am a little confused by all the options to distribute a program.
Please help bij answering (one of) the following questions:
1. Does an application built with the application builder always need the LV runtime engine? The LV runtime engine is 33 Mb to download!
2. Is there anyway to make a 'normal' executable that runs on a windows machine, without any supporting installed software?
3. What is the advantage of the labview player above the runtime Engine?
All questions refer to the latest software versions of NI software
Thanks in advance,
Regards,
Ferry

ferry1979 wrote:
1. Does an application built with the application builder always need the LV runtime engine? The LV runtime engine is 33 Mb to download!
Yes, the runtime engine contains all the stuff that is common to all LabVIEW applications. This is not any different than e.g. the Visual basic runtime (VBrun...) or dforrt.dll for Fortran.
If you built the application, you can strip it a little bit by including the runtime with the installer and leaving out unneeded modules (see image from the 7.1 builder).
The advantage of a seperate runtime engine is that applications are very small. The runtime needs to be installed only once. On any broadband connection, 33MB is peanuts. I distribute everything without runtine, but tell people to download and install the runtime directly from NI.
(In LabVIEW 4, no runtime was needed, with the disadvantage that even the simplest program was multiple megabytes. Not an efficient solution).
(Maybe in a few years LabVIEW will be so prevalent that the LabVIEW runtime will be part of a standard OS install ;
2. Is there anyway to make a 'normal' executable that runs on a windows machine, without any supporting installed software?
No. See above.
3. What is the advantage of the labview player above the runtime Engine?
The two are quite different. The labview player is more a simple educational tool, because it lets users inspect the diagram. It is not designed for any serious application deployment.
Message Edited by altenbach on 08-21-2005 10:05 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
runtime.png ‏24 KB

Application Build problem Labview 8.5.1

Having a problem creating an Installer with 8.5.1. When being built a menu appears asking for
"NI Labview 8.2.1" distribution. Needs to copy a component installed or updated by the distribution to continue building the installer.
Despite trying all of the Disks I have, First quarter DVD, and all of the second quarter CD's it does not recognise any of them. When the CD's or DVD is inserted it shows a nidist.id file which I select (because it says that's what it requires) but them it gives a message stating that
"You cannot choose this folder name; a file of that name exists"
I have tried this build on 2 different machines and get the same response, anyone got any ideas on this or is it a no brainer in 8.5.1?
One last thing if this lot cannot be got to work, the additional files required are:-
Ni Labview Runtime Engine 8.5.1
NI Measurement & Automation Explorer 4.5
NI PXI Config Support for Windows
NI DAQmx 8.7 (unsure if this is included in MAX?)
NI Visa Runtime 4.4
Does anyone know if I just downloaded these from NI website and installed on the computer that will run the final .EXE file it will work?
Labview Version 8.5
Labview Version 8.6
Labview Version 2013

Hello Jack1,
I have been looking into your posts. There are two immediate actions you could try to help. I have identified that you are having issues with the computer recognizing that you have inserted the CD it has requested. Also, you are having trouble with repeatedly being asked to change back and forth through disks, at every attempt to build the installer. As you may need to try this more than once, it may be helpful to you to create a folder for each CD or DVD, and copy and paste the contents of the individiual disks. This software will be recognized, even if copied on to your hard disk.
When you click 'Build', to begin building your installer with your necessary additional resources, you will be asked to insert the last set of CDs or DVDs you have used. However, at the prompt you can click on the 'Folder' icon and browse the folder where you have saved the individual disk contents. The error you were receiving in your first post, "You cannot choose this folder name; a file of that name exists", implies that you were most like click on the *.id file and selecting ok. I have avoided this on my machine by opening the folder with the disk contents, not selecting any files, and the click the 'Current Folder' button. After you have selected it, ensure that you have ticked the box next to 'Cache components from this distribution.' Whether you use the CD, or folders containing the disk contents, this options creates a local copy of the requested files to a cache directory, therefore no requiring the user to input disks, or point to file locations in the future. If you have a repeated patter of building applications and installers, this will quicked your process, and eventually allow to delete the disk contents you have copied to your hard disk.
The disks from your previous installations are requested primarily because of your selection to include NI-DAQmx as an Additional Resource. As this is the main driver, shared components are recognized by the Application Builder. I, therefore, can recommend that you try building the installer with the above steps on your laptop, which your mentioned is a fresh installation.
When you have had a moment to try this, please post back to see if I can answer any further questions on this topic, or know that it has worked.
Regards,
Message Edited by gt3000 on 11-03-2008 03:26 PM
George T.
Applications Engineering Specialist
National Instruments UK and Ireland

Application Build for Imac G5

Hi All
I am again in a bit of a situation here ! I just built an appplication in cocoa and am trying to run it on an IMAC G5 . The development environment is IMac INTEL CORE 2 DUO TIGER and XCODE and the application is running fine on the iMac G4 with tiger or leopard on it . I have user universal binaries while building the application . However not the application doesn't run at all on the iMac G5 (ppc). I need some help as to how to proceed and is there anything special which has to be done for the iMac G5 .
Any help would be highly appreciated.
Thanks .

I am not familiar with that widget. However, I would guess that it has not been updated to run on the latest version of OS X.
Barry

CVI application asks for Labview RTE

Hello,
I have installed an application made with CVI 2010 several times on different computers without any problem but now on 1 computer I get the following error when I try to start the application:
Labview Run-Time Engine 7.1 Configuration failed
Please find attached MSI logs.
How can I solve this issue?
Thanks
Bertrand
Attachments:
Problème DTI.doc ‏152 KB

Hi again
Of course, the installation of an autonomous application should not (and usually do not) require any other component than the RTE of CVI and the drivers used by the applciation (if you call an acquisition board for instance in the program).
Should you want to proceed to a clean deinstallation procedure on the computer causing trouble, you can download MSI Blast from the following link :
http://forums.ni.com/t5/Multifunction-DAQ/i-am-looking-for-MSI-Blast-a-utility-to-remove-NI-DAQ-driv...
Of course, you should use this program with caution.
Removing every acquisition board from the computer before running it is also a good idea.
After that you should install all the programming software you want to use, install the drivers and then reconnect the boards.
An other way to solve the problem would be to make sure that your installer is not requiering useless components.
To repair the installer in this case, you can use the following documents (the procedure is written for LabVIEW, but it should be the same under CVI).
How Do I Stop the Missing Distribution Notification Each Time I Build An Installer?
Why Do I Get A "Missing Distribution" or "Distributions Needed" Error When Trying to Build an Instal...
I hope this information helps.
Best regards,
Guillaume H.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> NIDays 2011, le mardi 8 février au CNIT de Paris La Défense

AIA CRMOD Build error - antfetch doesn't support the "antfile" attribute

Hi.
I am trying to build the CRMOD PIP under Linux, and I am getting the following ANT error:
antfetch doesn't support the "antfile" attribute
The build actually completes without any errors being posted on the screen, but the log file of the job, has this message within it, as well as a BUILD failure emanating from within the AIAInstallDriver.xml file.
Does anyone know how to get around this issue ? The verision of ANT that we are using, is from the Weblogic Server envrionment.
Thanks.

I seriously hope that they don't expect us to use nightly builds of Netbeans 7.1 when the official final version of JavaFX 2.0 is released because of this issue.
Their should be an update to Netbeans 7.0.1 upon JavaFX 2.0 final release. C'mon Oracle! You can do better than that!

CRMOD PIP Build Error - antfetch doesn't support the antfile attribute

Hi.
I am trying to build the CRMOD PIP under Linux, and I am getting the following ANT error:
antfetch doesn't support the "antfile" attribute
The build actually completes without any errors being posted on the screen, but the log file of the job, has this message within it, as well as a BUILD failure emanating from within the AIAInstallDriver.xml file.
Does anyone know how to get around this issue ? The verision of ANT that we are using, is from the Weblogic Server envrionment.
Thanks.

I seriously hope that they don't expect us to use nightly builds of Netbeans 7.1 when the official final version of JavaFX 2.0 is released because of this issue.
Their should be an update to Netbeans 7.0.1 upon JavaFX 2.0 final release. C'mon Oracle! You can do better than that!

Application Builder for labVIEW 7 Doesn't support any report generation function

Similar Messages

Maybe you are looking for