Application doesn't even open!!

I have a lumia 520. Problem is that skype wont open in my mobile. I click on the icon but nothing happens. I have tried reinstalling many times. Please suggest me a solution.

Google if Change Language easy...

Similar Messages

  • My iPhoto doesn't even open! i get same message saying it's unreadable! anybody else have this problem!?

    my iPhoto doesn't even open! i get same message saying it's unreadable! anybody else have this problem!?

    First try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists. If it doesn't then your current library is the culprit.
    If that's the case make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Maps software doesn't even open

    hi i don t understand i managed to open the map software a couple of times but could never download new maps.But now i can't even open it .Any ideas ??
    Solved!
    Go to Solution.

    If you're opening maps not car maps then just wait for 5min. It just might open and work fine. After I downloaded whole World maps I've had this problem that it takes around 5min to start. It's either maps or booster-e process that takes 100% cpu load and delays the starting. Car nav works just fine.

  • Iweb began crashing after I was editing the blog page, I think it was somehow overloaded, and now iweb doesn't even open.

    I kept turning the computer off and on and it doesnt open still, only the inspector tablet. what do i do!!!

    Try the following:
    delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
    go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
    Click to view full size
    launch iWeb and try again.
    If that doesn't help continue with:
    move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
    launch iWeb, create a new test site, save the new domain file and close iWeb.
    go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
    move your original domain file from the Desktop to the iWeb folder.
    launch iWeb and try again.
    Lastly, close iWeb and open iPhoto.  Select a couple of photos and use the Share ➙ iWeb ➙ Photo Page menu option.  Give it a couple of tries if the first one doesn't help.
    OT

  • ICal doesn't even open up

    Hi,
    I just got an iBook G3. Sadly, right from the start, I'm experiencing problems. When I try to open iCal, the icon in the dock bounces up and down for a minute or so, and then either I have to force quit it, or either it just stops bouncing and nothing comes up. The same is happening for iChat too. I've never even seen these apps work for once since yesterday.
    Any ideas as to what could the problem and the solutions be?
    Thanks

    yeah u know what?.. im having a very similar problem. very frustrating. i try to open up iCal and then the icon shows up in the tool bar and then disappears shortly there after. please help us!.. thanx
    -salman

  • IWeb doesn't even open!

    I can't get iWeb to open. Every time I try, I get "The application iWeb quit unexpectedly" box.
    What can I do?
    Thanks,
    Bruce

    The domain file is a bundle, if you get info about it you can open it and you will see everything that makes up your website. If this or something in it becomes corrupt you may have problems opening iweb.
    However I suspect that if you have never opened iweb and hence not created a website that you you may not actually have a domain file. Obviously if you have, you will and this could be (and apparantly has been) the source of some peoples problems.
    I was merely trying to establish if those that had never succesfully opened iweb had a domain file, so we could eliminate this as a fix for those people.
    Slightly off topic but it seems like a good idea to regularly back up the domain file so if problems occur, one can go back to yesterdays or last weeks version to save losing everything you have ever done.

  • HT1473 I got my MAC PRO installed with iOS lion and since then i'm unable to add music on my iTunes and i tried adding to library option but still it copies and at the end it stays empty, doesn't even open new songs on it. any suggestions ?

    hey,
    I've rebooted my mac before installing new ios lion, so after everything was done i copied my data back to my mac book pro, then simple clicked on adding to library option in itune and it only synced half of the track and rest simply didnt copy, i thought maybe some error occured and i tryed the same procedure again but its not adding more tracks in it. and i just notice when ever i try play a new song through my data it does not open in itune these are the same tracks and songs i been listening to since ages on different note books and pods..
    Help me i've tryed everything but nathing seems to be working. and my itune is uptodated =S

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • Safari doesn't even open..

    when i open safari and go to open a url on safari boswer, all the options are grayed out... what does that mean?

    What happens when you type a url in the address bar and hit return?

  • I installed this new Firefox 4 on my Windows 7 64-bit OS and now it doesn't even open.

    This web browser has turned out to be the worst thing I've ever had to deal with on my computer. I upgraded my Firefox 3.6.2 which was amazing and my go-to web browser. Now after many re-installs I still can't get this new thing to open. I'm going to lose it soon. Good thing I saved my bookmarks before. When I click the .exe file, it shows in my task manager that it is running but no windows appear. I've restarted my machine and tried everything possible to get it to work. NOTHING.

    Thanks for the info airmanjack.
    My firefox wasn't opening (windows 7 64bit), but was running in task manager, and was also using 50+% of my processor.
    I'll try your trick tonight.
    Firefox does open on my work computer, but I have problems with it crashing multiple times per day. Is there anywhere I can download the last version of Firefox 3?

  • Bridge doesn't even open - partial uninstall?

    I purchased CS6 and installed it - I think everything worked fine when installed.  A couple of months later, my bridge program just stopped working - on the windows 7 pro desktop and almost immediately on the win 8 laptop.  And of course, if Bridge doesn't work, neither does mini-bridge.
    Today is the day to fix all the stupid techie issues... Is there a way to fix Bridge without uninstalling the entire package on both computers?  I'm not familiar with an overall program management screen that would let me select what to uninstall and/or repair.
    Thanks!

    No, Bridge requires the main program to be installed and it will just tag along. Run the Creative Cloud Cleaner Tool and simply reinstall PS, then be careful to not apply the latest update again that introduced this issue.
    Mylenium

  • The camera on my iPod will not work, it doesn't even open. How do I get it to work?

    I tried resetting my iPod the camera worked then but when I tried to flip it to the front camera it closed and now it doesnt work again.

    Just what are you saying? You are not not the person who posted the problem/question.
    just219 wrote:
    lllaass wrote:
    If you restored to factory defaults/new iPod and still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    yes and it works most of the time after the restore

  • Real-Time Application doesn't run; source code works fine

    The short version is I'm programming a cRIO and apparently the RT code isn't running after being deployed and I can't figure out why. This is further complicated that I'm doing all this remotely and I don't have direct access to the unit since I'm 500 miles away. I'm working through a couple of other guys who know some LabVIEW, but neither works at the site so they have to explicitely travel out there every time I have a bright idea.
    I was out there a few weeks ago. During this time I created a simple cRIO code, since I'm new to cRIO, that allowed the user to move a control and change a graph. It worked fine, but I should note it did not have an FPGA component. After that I worked on the real code, which reads some sensors, displays the results on a UI and logs the results. This did have FPGA. I used it in the LabVIEW environment and it worked fine, but I ran out of time before I could complete a release version and deploy the RT as a compiled application. I sent them the release version later, my contact deployed it but got network stream errors when running the UI.
    After hours of looking at network problems and sending over debug versions, I tried creating a log on the RT level so I could see what was going on. The log doesn't even open, even if it's the first command in the code. I pored through the forums and found http://forums.ni.com/t5/LabVIEW/cRIO-Troubleshooting-creation-and-deployment-of-startup/td-p/1956475... which took me in a new direction.
    I had my contact use the RT debug console and when he pulls up the RT front panel, it shows a broken run arrow. He clicks it and nothing happens -- no running, no bug list. If he pulls up the bug list manually, it's empty. Again the RT works fine if you run it through LabVIEW and not as a compiled real-time application. He also noticed that the Open FPGA VI was grayed out on the block diagram. No other icons are.
    So the problem appears to be that the compiled RT application is getting some kind of error but not telling me what it is, and it seems to be related to opening the FPGA. I've recompiled the FPGA and RT. I've had him recompile the RT himself, but not the FPGA because it would take hours. He's downloading everything correctly to the cRIO. The RT is set to run automatically. He's rebooting the cRIO every time he deploys the RT. They have LabVIEW on a computer there but it doesn't have the right drivers to run the code from the LV environment. I'm resisting having them install the dirvers because downloading big files is complicated there due to security restrictions and a lousy network connection at a remote site. Besides that doesn't solve the problem of the RT executable not running the same as the source code, which according to the thread above appears to be a thing.
    The latest thing I'm trying is that I sent him instructions for how to build a source distribution from the project I sent and try deploying that to the cRIO. Even if that works I'm not sure that's an acceptable solution because I assume running the VI rather than the EXE is slower, and they need speed on this project.
    I simply have no idea where to go from here. I probably need to get direct acess to the cRIO and I might be able to convince them to ship it to me so I can figure this out, but I'm not sure where I'd even start other than the standard voodoo debugging of "try stuff at random until something works". I'm open to suggestions if anyone has managed to solve this before.
    Code snippet of the first part of the project is attached, though I'm not sure how much good it will do. I'm really stumped and the client is getting frustrated with how much of the budget is going to fix this.
    Solved!
    Go to Solution.
    Attachments:
    RTMainSnippet.png ‏623 KB

    Have you checked the cRIO error log? Usually I'd access it through the LabVIEW project (right-click on the target, don't remember the exact menu options and I don't have the RT toolkit installed on this machine to check), but it must be stored somewhere on the cRIO as well, although I don't know if it's in a human-readable format.
    Which cRIO are you using? What exactly do you mean by "debug console"? (This may be related to the cRIO - the newer ones have video out, although I don't know if that's what you're referring to.) With a broken run arrow, you won't get an error list unless you're running in the development environment.
    Have you confirmed that the software installed on the cRIO matches the version you're using for development, including patch level? Get someone to connect to the cRIO with Measurement and Automation Explorer, and get a list of the software installed on the cRIO.
    Sounds like the ability to connect with a remote debugger would be helpful here, if you can get the right drivers installed on the machine with LabVIEW that's connected to the cRIO. Make sure all driver versions match what you're using. Any chance you could then do a remote desktop connection from your work site to the remote LabVIEW machine?

  • After updating to the latest version, I'm able to open and use the browser for one day. The next day, the browser doesn't not open up. please help!!!

    -reformatted computer, reinstalled everything
    -downloaded the newest version of mozilla
    -happily went online for one day
    -next day, browser does not load
    -later the next day, browser doesn't even open up
    -now when i go to open mozilla, something like this shows up:
    "server busy, taking too long...if your firewall is on make sure mozilla is allowed to browse...adjust proxy settings blah blah...

    HI Juanverano,
    Not a problem, Safe Mode will disable addons and hardware acceleration. If this continues and it is not an add on this will be the next step to try to disable acceleration:
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    #Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
    #* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
    #* In Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    #In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
    #In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    #Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!
    Thank you.

  • Lenvo User Guide doesn't want open the pdf file. Why!?

    Lenvo User Guide application doesn't want open the pdf file after selecting my language. I have Adobe Reader installed on my laptop and application is from oryginal Lenovo cd with drivers. I don't know why. Earlier it worked perfectly. I installed and reinstalled it many times but the problem still exist. Does anybody know the solution?

    hi tora117,
    Welcome to Lenovo Community Forums!
    Can you try right clicking the User guide file and go to General tab  and check if the "open with" settings is set to Adobe Reader.
    If still won't work download a new User guide from www.support.lenovo.com
    Home this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My iPhone 5S won't show up in iTunes to sync. It charges still and it opens iPhoto, but doesn't even register in iTunes

    My iPhone 5S won't show up in iTunes to sync. It charges still and it opens iPhoto, but doesn't even register in iTunes. I have no idea what to do and nothing is working!
    And the other night while i was trying to sync my phone, it was working until "Error message (-50)" started coming up every time i tried to sync or update my phone's software through itunes on my computer. eventually, itunes quit and i unplugged my phone and updated it wirelessly. i have no idea why any of this is happenings. Itunes is still acting weird for me too.

    Error -50 is generally associated with firewalls or anti-virus software as described here:
    http://support.apple.com/kb/TS1583
    Separately, are you using iTunes 11.1.4?

Maybe you are looking for