Application Express Database
I created a database using Application Express and can not recall my password. I am able to log in as an Admin; however the system will not allow me to reset the user's password because an email address is not available in the system. Can anyone tell me how to add a user's email address so that I can reset the user's password?
I also need to know how what is the difference between 'Take a full database backup vs Backup database'? I performed a backup a couple of days ago, but I need to simulate a database failure and prior to doing so, I need to backup the database so that I can see the changes.
Thank you.
Did you try to update the user's email address? After you update it, you can then reset the password.
Go to Administration > Manage Users and Groups > Edit user (by clicking the pencil icon under Edit column) > Enter Email Address and click the [Apply Changes]
Robert
http://apexjscss.blogspot.com
Edited by: sect55 on Dec 16, 2012 7:49 PM
Similar Messages
-
How can you SELECT via Database Link CLOB data using Application Express?
Customer Issue:
Developer using Oracle's Application Express 3.1. The Developer is trying to SELECT a CLOB datatype column from a remote (10.2.0.3) database, via a database link on her 10.2.0.4 based client Application. The Developer wants to be able to select CLOB data from the remote database which has limitation that she can't make any changes to the remote database.
Developer's Comments:
I do a select and get the error. Getting error ORA-22992: cannot use LOB locators selected from remote tables. So she feels she can't use dbms_lob.substr in this configuration I can do a "select into" but that is for one value. I am trying to run a select statement for a report that brings back more than one row. I do not have permission to change anything on the remote database. I want to access the remote database and multiple tables.
This is not something I work with, would greatly appreciate help or ideas. Is this a limitation of the 3.1; or does she just not have this set up correctly; or should she be using a Collection (if yes, please share example)
Thanks very much,
Pam
Edited by: pmoutrie on Jun 4, 2009 12:01 PM
Hello???
Would really appreciate an answer.
Thanks,
PamThis may not be a perfect solution for you but it worked for my situation.
I wanted to grab some data from Grid Control's MGMT$JOB_STEP_HISTORY table but I couldnt' create an Interactive Report due to the existance of a CLOB column. I cheated this by creating a view on the GC DB, grabbing the first 4000 characters and turning it into a varchar2 column:
create view test_job_step_history as
select job_Name, target_name, status, start_time, end_time, to_char(substr(output,1,4000)) output
from MGMT$JOB_STEP_HISTORY where trunc(end_time) > trunc(sysdate)-90
In an APEX Interactive Report:
select * from test_job_step_history@GCDB
Granted, the output looks aweful right now but I am only looking for a very particular output (failed, denied, ORA-, RMAN-, etc) so the formatting isn't the most important thing to me right now.
If anyone can improve -- and I'm sure you can -- on this I'd love to hear about it.
Thanks,
Rich -
Oracle Database XE to Application Express 3.0.1
Hello,
For some reason, I am really lost when it comes to upgrading from Oracle Database XE to Application Express 3.0.1. in a PC Windows 32-bit environment. In the following link: http://www.oracle.com/technology/products/database/application_express/html/3.0.1_and_xe.html
it states to follow step 3.2 of the following link: http://download.oracle.com/docs/cd/B32472_01/doc/install.300/b32468/install.htm#CHDHIJGE.
It tells me to run apexins.sql. I can't find this script. Am I missing something? I need very detailed step-by-step instructions. Any and all help is welcome. I have been fighting with this for two days, and I am not getting anywhere. Thanks in advance!
SharonHi, try with this>
Apex 3.01 Install
gordan
http://gordanmilojevic.blogspot.com/ -
Database security with PUBLIC EXECUTE privileges for Application Express
I recently tried installing APEX into an existing database containing a data warehouse. Security on this database is quite controlled and PUBLIC EXECUTE to SYS owned objects had been removed. Ie there was no PUBLIC EXECUTE on:
DBMS_LOB
UTL_HTTP
UTL_FILE
UTL_SMTP
UTL_RAW.
When I tried to install APEX, I got all kinds of errors and logged a TAR. The analyst told me to grant execute to public to the above SYS owned objects. This contradicts the "Policies" in 10G Grid control and the Metalink Notes 131752.1 &
Note:247093.1.
Can these execute privileges be changed to another user in the htmlDB
application such as FLOWS_FILES? Or HTMLDB_PUBLIC_USER? What is the security reccomendations for Oracle Application Express? Calling any product managers out there....Developers/users have started clicking around and are now getting errors. There is a function called CUSTOM_AUTH and one called CUSTOM_HASH which do not compile. They have complain about not seeing UTL_RAW so had been relying on PUBLIC synonyms. here's the 1 function:
create or replace function custom_hash (p_username in varchar2, p_password in varchar2)
return varchar2
is
l_password varchar2(4000);
l_salt varchar2(4000) := '2ZVKZMILYMGVFRFXOZIVZ72RJNJY8V';
begin
-- This function should be wrapped, as the hash algorhythm is exposed here.
-- You can change the value of l_salt or the method of which to call the
-- DBMS_OBFUSCATOIN toolkit, but you much reset all of your passwords
-- if you choose to do this.
l_password := utl_raw.cast_to_raw(dbms_obfuscation_toolkit.md5
(input_string => p_password || substr(l_salt,10,13) || p_username ||
substr(l_salt, 4,10)));
return l_password;
end; -
Is Oracle Application Express the same of Oracle Database Express Edition (
Hi,
perhaps a silly question.
I've tried to download Oracle Application Express. Before of installing it, I've noticed that looking at the About the Create Application Manual it looks like the Application Builder that I already use with the web-based page for Oracle Database 10g XE (Express Edition). But thus is Oracle Application Express the same of using Application Builder of Oracle Database 10g XE? To me it seems so, but I'd like to be sure of that
Thanks!oracle database XE 10g include APEX installed, version 2.... i don't remember exactly
Oracle database sinde 11g includes APEX installed too
Yes, APEX have a tab with application builder, there you create applications, but the version is very old, install Oracle DB XE 11g or upgrade APEX -
Database or Application Express Authentication
For an APEX application that resides behind a secured portal, which authentication scheme should I use?
It seems to me Database authentication is more flexible (many db users granted with different privileges) while Application Express authentication is easier (one user with authorization not as flexible).
Am I off on the assumption? can someone tells me the pros and cons of the two?
TIA,
YivonHi, Dimitri --
It is not Oracle portal. This portal is set up to limit access from public. I will have a link behind the portal, but I still need to limit access to groups of users with various permissions. Meaning whoever can click on the link does not necessary have permission to access my APEX application, and even if he/she can access the application, he/she may not be able to access certain pages or buttons.
My questions is: which authentication scheme will be better and why.
Thanks again,
Yivon -
Does "Application Express" belong to the "Database" Category
I wonder if the "Application Express" forum belongs in the "Database" Category. Probably it could be moved to an Application Server or Developer category ?
Its not App Server. It is developer-related, but then so is SQL and PL/SQL and oracle text.
Does Jive support a single forum appearing in multiple categories ? -
Can not login to Oracle Application Express after upgrade to 3.2
I installed oracle database express and then I upgrade APEX to 3.2 on it. I got the login page but I can not login by using any account, like SYS, SYSTEM. From the document, internal ADMIN account should exist but I did not see it from dba_users table.
Thanks,
JulieHI Don,
I did run apxchpwd.sql to change the Application Express ADMIN user password. Then I invoked http://mymachine:8080/apex and got the Application Express login page. I put ADMIN in workspace and ADMIN in Username and the new password. But I still cannot login. I also tried http://mymachine:8080/apex/apex_admin page login. I typed ADMIN as username and the new password. Then I clicked on Login button. Nothing happened. No error message.
Any idea?
By the way, what does apxxepwd.sql do?
Thanks,
Julie -
Application Express Printing in 3.1 and Oracle 9i
Hi,
I am running Application Express 3.1 on a Oracle 9i box using application server 10.1.2 for the web server and when ever we try to do any printing to PDF files it files, changing to HTML give me the following errors; (it works fine from our 10g2 box also running Apex 3.1)
Any ideas on this?
Fri, 18 Apr 2008 17:45:41 GMT
ORA-03113: end-of-file on communication channel
DAD name: apex
PROCEDURE : f
URL : http://nww.infoportal.wiltshire.nhs.uk:80/pls/apex/f?p=105:7:4081603134239502428:FLOW_XMLP_OUTPUT_R383146513321010166_en-gb
PARAMETERS :
===========
p:
105:7:4081603134239502428:FLOW_XMLP_OUTPUT_R383146513321010166_en-gb
ENVIRONMENT:
============
PLSQL_GATEWAY=WebDb
GATEWAY_IVERSION=2
SERVER_SOFTWARE=Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server
GATEWAY_INTERFACE=CGI/1.1
SERVER_PORT=80
SERVER_NAME=nww.infoportal.wiltshire.nhs.uk
REQUEST_METHOD=GET
QUERY_STRING=p=105:7:4081603134239502428:FLOW_XMLP_OUTPUT_R383146513321010166_en-gb
PATH_INFO=/f
SCRIPT_NAME=/pls/apex
REMOTE_HOST=
REMOTE_ADDR=10.184.150.119
SERVER_PROTOCOL=HTTP/1.1
REQUEST_PROTOCOL=HTTP
REMOTE_USER=apex_public_user
ORACLE_SSO_USER=
OSSO_IDLE_TIMEOUT_EXCEEDED=
OSSO_USER_GUID=
HTTP_CONTENT_LENGTH=
HTTP_CONTENT_TYPE=
HTTP_USER_AGENT=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; InfoPath.2; .NET CLR 1.1.4322)
HTTP_HOST=nww.infoportal.wiltshire.nhs.uk
HTTP_ACCEPT=image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
HTTP_ACCEPT_ENCODING=gzip, deflate
HTTP_ACCEPT_LANGUAGE=en-gb
HTTP_ACCEPT_CHARSET=
HTTP_COOKIE=ORA_WWV_R1=%23ALL; ORA_WWV_R2=%23ALL; ORA_WWV_R3=%23ALL; LOGIN_USERNAME_COOKIE=dpithouse; ORA_WWV_REMEMBER_UN=DPITHOUSE:cascard; ORA_WWV_USER=180C4AB57E701292; WT_FPC=id=2c0fb891060c298ae401208366087265:lv=1208518017286:ss=1208517692850; WWV_CUSTOM-F_6578422443884676_105=AEA5DD5F752363DA; WWV_CUSTOM-F_6578422443884676_100=180C4AB57E701292
HTTP_IF_MODIFIED_SINCE=
HTTP_REFERER=http://nww.infoportal.wiltshire.nhs.uk/pls/apex/f?p=105:7:4081603134239502428:::::
HTTP_SOAPACTION=
HTTP_ORACLE_ECID=1208540734:10.162.200.150:1328:5536:2513,0
HTTP_ORACLE_CACHE_VERSION=
HTTP_AUTHORIZATION=
WEB_AUTHENT_PREFIX=
DAD_NAME=apex
DOC_ACCESS_PATH=docs
DOCUMENT_TABLE=wwv_flow_file_objects$
PATH_ALIAS=
REQUEST_CHARSET=WE8MSWIN1252
REQUEST_IANA_CHARSET=WINDOWS-1252
SCRIPT_PREFIX=/pls
HTTP_IF_MATCH=
HTTP_CACHE_CONTROL=
SOAP_BODY=
HTTP_X_ORACLE_DEVICE_CLASS=
HTTP_X_ORACLE_DEVICE_ORIENTATION=
HTTP_X_ORACLE_DEVICE_MAXDOCSIZE=
HTTP_X_ORACLE_DEVICE=
HTTP_X_ORACLE_ORIG_ACCEPT=
HTTP_X_ORACLE_ORIG_USER_AGENT=
HTTP_X_ORACLE_USER_LOCALE=
HTTP_X_ORACLE_USER_NAME=
HTTP_X_ORACLE_USER_DISPLAYNAME=
HTTP_X_ORACLE_USER_USERKIND=
HTTP_X_ORACLE_USER_AUTHKIND=
HTTP_X_ORACLE_USER_DEVICEID=
HTTP_X_ORACLE_USER_LOCATION_ADDRESSLINE1=
HTTP_X_ORACLE_USER_LOCATION_ADDRESSLINE2=
HTTP_X_ORACLE_USER_LOCATION_ADDRESSLASTLINE=
HTTP_X_ORACLE_USER_LOCATION_BLOCK=
HTTP_X_ORACLE_USER_LOCATION_CITY=
HTTP_X_ORACLE_USER_LOCATION_COMPANYNAME=
HTTP_X_ORACLE_USER_LOCATION_COUNTY=
HTTP_X_ORACLE_USER_LOCATION_STATE=
HTTP_X_ORACLE_USER_LOCATION_POSTALCODE=
HTTP_X_ORACLE_USER_LOCATION_POSTALCODEEXT=
HTTP_X_ORACLE_USER_LOCATION_COUNTRY=
HTTP_X_ORACLE_USER_LOCATION_TYPE=
HTTP_X_ORACLE_USER_LOCATION_X=
HTTP_X_ORACLE_USER_LOCATION_Y=
HTTP_X_ORACLE_SERVICE_HOME_URL=
HTTP_X_ORACLE_SERVICE_PARENT_URL=
HTTP_X_ORACLE_HOME_URL=
HTTP_X_ORACLE_MODULE_CALLBACK_URL=
HTTP_X_ORACLE_MODULE_CALLBACK_LABEL=
HTTP_X_ORACLE_CACHE_USER=
HTTP_X_ORACLE_CACHE_SUBID=
HTTP_X_ORACLE_CACHE_AUTH=
HTTP_X_ORACLE_CACHE_DEVICE=
HTTP_X_ORACLE_CACHE_LANG=
HTTP_X_ORACLE_CACHE_ENCRYPT=
HTTP_X_ORACLE_ASSERT_USER=Unfortunately I can't provide much help, other than that we have seen this before with 9iR2, but haven't yet figured out when this does occur, so not sure if it's related to a specific patch version. If possible, I'd recommend upgrading to database 10g or higher. And if we do figure out under what circumstances this problem comes up in 9iR2, I'll post this on the forum.
Regards,
Marc -
Upgrading Application Express on Oracle XE (installed on Ubuntu 8.04)
I'd installed on my laptop (OP is Ubuntu 8.04) Oracle XE and is wotking quite fine.
But I really like to upgrade apex to last version (3.1.2). I read documentation but are not many information about how to upgrade.
DanielThanks Arie,
On whatever version of Windows I've updated without problems Application Express.
I'm talking here about Ubuntu (a debian distribution of Linux).
My problem is where to unzip apex, where to use sqlplus command prompt etc., because is different than Windows.
If you don't have DBA rights on the account (user account other than root) you have errors in installation process and more.
For example they say in doc...:0
"To run the apxconf.sql configuration script:
1. Change your working directory to ORACLE_BASE\ORACLE_HOME\apex or whatever convention used to indicate the Oracle home.
2. Start SQL*Plus and connect to the database where Oracle Application Express is installed as SYS. For example:
* On Windows:
SYSTEM_DRIVE:\ sqlplus /nolog
SQL> CONNECT SYS as SYSDBA
Enter password: SYS_password
* On UNIX and Linux:
$ sqlplus /nolog
SQL> CONNECT SYS as SYSDBA
Enter password: SYS_password".....
When you install Oracle what version you need, OP (Linux) create a different user account for Oracle. Usually if you want to use your account like dba for oracle, you need to give to that account the proper rights.
So, I need a installation rutine (for upgrading) for apex on Linux. -
Unable Logging in to Oracle Application Express Administration Services
I am new for DB. Installed Oracle XE, followed the instruction "Logging in to Oracle Application Express Administration Services", I can not find the login page:
http://127.0.0.1:7777/pls/apex/apex_admin
I work on the PC in which XE installed.
Where are these two files
ORACLE_BASE\ORACLE_HOME\install\portlist.ini
ORACLE_BASE\ORACLE_HOME\Apache\Apache\conf\httpd.conf
I did a search, can't find them.
Any help welcome.
Thanks.The default port for the Apex webserver is 8080, not 7777.
To access the XE Database GUI from the Start menu, select Programs (or All Programs), then Oracle Database 10g Express Edition, and then Go to Database Home Page. (I'm assuming your on Windows)
Or try: http://localhost:8080/apex in your browser.
The files you mention relate to Apache web server. Oracle XE does not include a Apache, it's web server is built into the database. Are you sure you're following the right documentation? See http://www.oracle.com/pls/xe102/homepage
Hope this helps. -
Need help on installing Oracle Application express 3.2
Hi,
I had downloaded Oracle 11g database and installed the personal edition.I got the Enterprise manager login page working and also the DBConsole
I had Downloaded APEX 3.2 and wanted to install apex 3.2.I wanted to do the following scenario
Scenario 3: Install from the Database and Configure the Embedded PL/SQL
Gateway
Planning to do these steps: ( I have few questions on these steps and are below each step)
■ Running the apxconf.sql Configuration Script
Do I have to install Oracle Application express or is it already installed in 11g personal edition?
Do I have to create a seperate database or schema for this step( I have only one instance orcl1) ?■ Verifying the Oracle XML DB HTTP Server Port
Can I do this step in my current orcl1 instance,if so which user■ Enabling Oracle XML DB HTTP Server
Once I carry out these steps, Can I access the admin page for apex with https://localhost:port/apex_admin ?
Am I missing any other steps ?
ThanksI have one idea..
Try to install again:
1) download and unzip apex_3.2 in $ORACLE_HOME
You will have:
$ORACLE_HOME/apex - old directory
$ORACLE_HOME/apex_3.2 - new directory
2) in command line go to $ORACLE_HOME/apex_3.2/apex
run sqlplus "/as sysdba"
in sqlplus run @apexins tablespace_apex tablespace_files tablespace_temp images
Where:
tablespace_apex is the name of the tablespace for the Oracle Application Express application user.
tablespace_files is the name of the tablespace for the Oracle Application Express files user.
tablespace_temp is the name of the temporary tablespace.
images is the virtual directory for Oracle Application Express images. To support future Oracle Application Express upgrades, define the virtual image directory as /i/.
Example:
@apexins SYSAUX SYSAUX TEMP /i/
3) check installation log for errors
4) in command line go to $ORACLE_HOME/apex_3.2/apex
run sqlplus "/as sysdba"
in sqlplus run @apxconf
set admin password
set port
5) run @apxldimg.sql $ORACLE_HOME/apex_3.2
6) check for running listener and try to login apex: http:\\host:port\apex\apex_admin
Good luck! -
How do I create "Oracle Application Express Adminstrator" in APEX 3.2.1?
Hello,
Quite the newbie so I appreciate any assistance with this.
How do create "Oracle Application Express Adminstrator" in APEX 3.2.1? I am not talking about a workspace adminstrator but an Entire APEX instance administrator or "superuser"?
I log into APEX_ADMIN as ADMIN and understand how to create a new user. But how do I grant the new user DBA or "super user" privlidges? It was easy to do when I first installed XE, I would just "check" the "DBA" when I created the user. But when I upgraded to APEX 3.2.1 the function does not seem to be there?
Thank you for any help you can provide!Hi,
I think you can not grant DBA role from Apex anymore.
You need connect to database e.g. with SYS user and grant that role.
http://www.oracle.com/technology/products/database/application_express/html/3.2_and_xe.html
Br, Jari -
Application Express Install - Login and images don't work
I followed the instructions (as best I understood them) to install Apex on my database, and then setup an Oracle HTTP server to work with it.
The problems I have are:
When i goto the "first" page, which for me is: http://tomcatvs01.traxusers.com:7777/pls/apex/apex_admin
1. The "Application Express" image at the top doesn't come out, which indicates to me the images weren't setup correctly, despite my best efforts.
2. I'm not sure what my "username" should be. I remember specifying a desired password when I ran the sql to install the Apex on the database, but I don't remember specifying a username. I assume it is: APEX_PUBLIC_USER
3. The big problem... whatever Username/password I use, "nothing" happens when I click the "Login" button. With MSIE, it shows the exclamation "error on page." icon on lower left side when I click "Login", which details show this error message:
Line: 1
Char: 1
Error: Object expected
Code: 0
URL: My URL given above, but mixed with what appears to be the session ID, which is the same URL that i'm taken to when I goto the page in the first place.
It doesn't work with FireFox either, and I've tried the client/browser from multiple machines.
Advice appreciated.
My setup is to use an Oracle 10g release 02 database.
I installed Oracle HTTP server from the Companion CD on another machine, which already had an Oracle home/client of it's own.
I then installed APEX sql on the database (i first ran the webtoolkit sql) .
On the machine I put the HTTP server on, I copied the apex images to: E:\oracleHTTP\product\10.2.0\db\Apache\Apache\images
And I configured my dads.conf file (in E:\oracleHTTP\product\10.2.0\db\Apache\modplsql\conf) as such:
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
Alias /i/ "E:\oracleHTTP\product\10.2.0\db\Apache\Apache\images\"
AddType text/xml xbl
AddType text/x-component htc
<Location /pls/apex>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlDatabaseConnectString proddb01.traxusers.com:1521:trax ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDefaultPage apex
PlsqlDatabasePassword apex
Allow from all
</Location>OKay, I kept reading other people's posts and I found the main culprit of my problems. I needed to add a forward-slash to my images directory specification in my dads.conf file. Now my images come out, and my login button "works".
However, I still can't login because i don't know the username (at least now it tells me the credentials are not correct!)
What is the username? I remember when running the @apexins SQL, i specified the password. But I don't remember every specifying a username, I even reviewed the instructions and couldn't find where I might have defined that. Please help! Can i extract it from one of the tables that was created? If so, I'd appreciate pointers as to which one exactly. -
Multiple Application Express Installs on one server
What, if any, restrictions / caveats are there for installing multiple Application Express versions on a single server? We have Application Express 2.2 installed and wondering if we can install Application Express 3.0 also.
With 2.2, we have FLOWS_020200, FLOWS_FILES, and APEX_PUBLIC_USER as database users. Version 3.0 will want to create FLOWS_030000, FLOWS_FILES, and APEX_PUBLIC_USER. Any problems with what I expect will be errors on "user already exists" for FLOWS_FILES and APEX_PUBLIC_USER?
Thanks in advance.Hello,
I'm really sorry but this is a typo on my part. It should be "You can't have two different APEX versions on the same instance."
Does it mean that if we install ApEx v3 we will have only ApEx v3?Yes. This is exactly what it means. The installation script automatically detect previous installed APEX (or earlier HTML DB ) version, and upgrade it. You can end up with only one version per instance.
Regards,
Arie.
Maybe you are looking for
-
Need your opinion on my project
Hello, i'm building a new project, need your advice on design.http://www.testwebdev.com/azwiki/
-
I can't open a video sent to my Ipad from an iphone
I had a video emailed to me from an iPhone but I can't view it. I can see it on my Acer laptop but not my Ipad.
-
How can I put a pdf document icon inside a pages document so that you can click on it and open up a the pdf document separately? In other words, I don't want the pdf document to actually be laid out in the pages document, I just want the pdf icon put
-
Insert data with Case Statement
Good Morning, I created table: CREATE TABLE DWG_LOG ( DL_ID_PK NUMBER NOT NULL ENABLE, DL_DRWNG_ID_FK"NUMBER, DL_REQUESTOR VARCHAR2(400 BYTE), DL_PHONE VARCHAR2(40 BYTE), DL_DATE_COPIED DATE, DL_APPROVER VARCHAR2(400 BYTE
-
How can I sort the order of the items in a playlist? When I create a new playlist in NokiaOviSuite and drag songs to the playlist from Windows explorer, the sort order is reverse for some reason (z-a order instead of a-z order).