Application launcher update problem

I have one user that travels between 2 sites and whenever they go to one
site or the other they run nalexpld.exe which tells them there is a new
version of application launcher and they must reboot. Both of these sites
are running SP3 with a Zen patch for COMCTL32.dll on top of that so they
SHOULD be the same.
The user in question might spend alternate days between sites so this is
quite annoying for them. I have done a search under NAL* in the public
directory and some of the files are slightly different date wise.
What files are looked at when NALEXPLD.EXE runs and can I manually copy
across one set from one server to the other without causing a problem to
finally get these fiels in sync.

Simon, look at this TID:
What files does NAL update automatically when launched?
http://support.novell.com/cgi-bin/se...?/10054188.htm
If all these files are at the same version on both servers, then the
user shouldn't get the message. Also pay attention the timestamps of the
files and the timezone settings of the servers and the workstation.
You also use naldesk.exe instead of nalexpld.exe - it will just start
nal without updating any files.
Deyan
[email protected] wrote:
> I have one user that travels between 2 sites and whenever they go to one
> site or the other they run nalexpld.exe which tells them there is a new
> version of application launcher and they must reboot. Both of these sites
> are running SP3 with a Zen patch for COMCTL32.dll on top of that so they
> SHOULD be the same.
>
> The user in question might spend alternate days between sites so this is
> quite annoying for them. I have done a search under NAL* in the public
> directory and some of the files are slightly different date wise.
>
> What files are looked at when NALEXPLD.EXE runs and can I manually copy
> across one set from one server to the other without causing a problem to
> finally get these fiels in sync.

Similar Messages

Application Manager Update problem

I am using Windows 7 64 bit.
I just tried to download Lightroom.
Before it would download, application manager had to perform an update.
After the update nothing will download anymore. When I try to install a program, I get "Installation Failed" message.
"The download appears corrupted. Press Cancel, wait a few minutes and try again. (-60)"
Canceling and waiting doesn't do anything. I even tried changing the application directory in preferences.
Nothing woks. Nothing installs.

Unfortunately that doesn't work either. As I posted in the Lightroom discussion, I tried to download the trial version of Lightroom. The download link doesn't work.
Apparently this is a fairly widespread problem. The Adobe solution is to use a different browser.
That is not an option since we can only use Internet Explorer at work.
It baffles me that downloads don't seem to work with Internet Explorer arguably the most used Internet client.
And yes I have everything turned off as far as addins and security.
If only Adobe would provide a simple link to downloads, it would be extremely easy to use and Adobe would not have to handle all these complaints.
I don't have problems downloading software from any other web site, only Adobes.
Sorry for the rant, but it is frustrating that something that should be so simple seems to always cause problems lately with Adobe.

Application Manager update problems

On my laptop the application manager is saying that it can't connect to the update server. I've disabled the firewall in Mcaffee even ensured PDAPP has full inbound and outbound rights and still no solution. Even completely closing Mcaffee doesn't solve the issue. Yet on my desktop the update routine runs and updates although updating Premiere Pro to 5.02 is failing.
Does anyone have an answer to either of my issues?
Further update, I have now removed any trace of any Adobe application and McAffee and after cleaning the registry and then reinstalling Creative Suite only I still have no success, it cannot find the update server!!
Well yet another update, lightroom 3 and Acrobat 9.3 can obviously communicate with Adobe because they have updated without application manager.
Message was edited by: djclemo

>regret not staying with CC
Previous via Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous

Mac G4 Problems with "Application Launch Failure"

I'm not sure if this is the right forum for my questions, so if not, please LMK where I should be asking for help.
I have a G4 running Mac OS X 10.3.9. In the last two weeks, I have had a number of errors involving an Application Launch Failure. This started immediately after I had the foolish idea of shutting down my computer for the night to save power. I selected Shut Down from the drop down menu, the computer shut down and everything seemed ok till the next morning when I started up. Since that time, I have had the application launch failure problem with Word, Excel, PowerPoint, Graphic Converter, Yahoo Messenger, and assorted other programs.
The error message I get is for instance: Application Launch Failure The application "Word" could not be launched because of a shared library error:1<MicrosoftWord> <CarbonLib> <CFMPriv_CarbonCore> " or a variation depending on the program.
I have "restored" the computer, I have reinstalled Mac OS X 10.3.9, reinstalled the relevant Microsoft Office suite, and I still get the error message.
Does anyone have any suggestions (other than getting a new system)?
TIA for any help.
Ronnie Wexler

Boot from the Install CD, but do not Install. Choose Disk Utility off the Installer Menu as your first action. Select your Hard Drive and choose ( Repair ). Repeat until it comes clean (or gets stuck). Then (Repair Permissons ) once.

Update to 10.4.11 causes loss of application launching

For some weird reason after updating Leopard Server 10 10.4.11 Build 8S169 from 10.4.10 causes the loss of application launching after a few minutes of activity.
All services appear to be running. All clients are able to connect to the server and FM Server 8.0V2 which is also running on this server still seems to be running fine. The configuration is 3.5GB RAM, Dual 500GB SATA using SoftRAID mirroring.
I can connect to the FM Server using FM Server Admin but CANNOT connect with the Server Admin Tools which have also been updated to 10.4.11.
I can't login using slogin either. I CAN connect using ChickenoftheVNC but it doesn't do me any good as I cannot launch anything.
I have reapplied the combo update 10.4.11 to no result as the same thing happens after 10 minutes. Any applications that ARE running continue to behave normally.
The error I am getting is -10810 which is a non-specific unexpected internal error.
Anyone have any ideas?
Thanks!
Asa

Hi
I remember a few people with this problem after updating - but having searched briefly, I can't find a specific fix.
However - I do suggest you download & apply the 10.4.6 Combo Update.
The combo update does seem to fix a number of different issues that users have had after installing the standard 10.4.6 update.... so it's certainly worth a try.

SBS Client Application Launcher has encountered a problem and needs to close

I logged in to a remote session on the SBS to add a user to a security group. Now, when I log on to my computer with the domain administrator account, I get the error "SBS Client
Application Launcher has encountered a problem and needs to
close." There is an event in the Application log associated with the error:
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1000
Date:  8/29/2011
Time:  2:27:46 PM
User:  N/A
Computer: CONTROLLERASST
Description:
Faulting application applnch.exe, version 5.2.2893.2, faulting module applnch.exe, version 5.2.2893.2, fault address 0x0002442a.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 61 70 70   ure app
0018: 6c 6e 63 68 2e 65 78 65   lnch.exe
0020: 20 35 2e 32 2e 32 38 39    5.2.289
0028: 33 2e 32 20 69 6e 20 61   3.2 in a
0030: 70 70 6c 6e 63 68 2e 65   pplnch.e
0038: 78 65 20 35 2e 32 2e 32   xe 5.2.2
0040: 38 39 33 2e 32 20 61 74   893.2 at
0048: 20 6f 66 66 73 65 74 20    offset
0050: 30 30 30 32 34 34 32 61   0002442a
0058: 0d 0a                     ..
After clicking to send/not send an error report, I get back to the desktop where all appears normal. However, I can no longer access the internet while logged in under this account.
I can log in on another PC with the domain admin account with no error.
Any help would be appreciated.

Hi,
I would like to suggest you run System File Checker with command: sfc /scannow to scan and repair the system files.
If it does not work, please also test the issue in Clean Boot.
Clean Boot
================
Let’s disable all startup items and third party services when booting. This method will help us determine if this issue is caused by a loading
program or service. Please perform the following steps:
1. Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
Note: If prompted, please click Continue on the User Account Control (UAC) window.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System
Configuration Utility when Windows starts" box and click OK.
What’s the result in Clean Boot?
For more information regarding Event ID 1000, please refer to the following link:
http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows%20Operating%20System&ProdVer=5.2&EvtID=1000&EvtSrc=Application%20Error&LCID=1033
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

IPhone Application Update Problem -- Please Help

So I downloaded the application Aurora Feint. Synced it to my iPhone and all was well. Then apparently there was an update. Instead of logging onto iTunes and updating it that way, I decided to try out the Application Store update feature on the iPhone itself. The problem is that the feature won't work for programs later than 10MB. (Aurora Feint is 20+MB.) So now I'm left with an unusable Aurora Feint update icon on my screen that is just taking up space.
I tried holding down the icons so I could just click the X to get rid of it. Problem is the update icon has no X. Then I tried syncing my phone via iTunes and telling it to remove the AF application. Supposedly it did. But when I disconnected the phone, the AF update icon is still there.
Can someone please tell me how to get rid of the blood thing?

If all else fails, first remove the app from iTunes (delete it), then do a restore of the iPhone. It should be gone after the restore.
Glor

In my iphone4s and my iPad every time who I ask an update or down load an application ask me a bill account at the past I have not a problem to downloaded any application or update until one time I bought one application

I try to downloaded any application or update to my iPhone or my iPad but asked me a billing acount. In the past any time who I asked any application or updated it was free until one time I bought one application with my bank debit cards once every time since then every time I want to download an application or update shows my account problem and not receive another card.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for furth

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for further assistance. It doesn't take me to customer support, but does take me to a screen which states. "Error "This serial number is not for a qualifying product." I've checked my account and the product serial number is associated with my account., so I don't see any problem. I have not been able to find a resolution to this problem, so I hope that someone can point me in the right direction. Thank you!

update directly, Product updates

Application Launch Failures after Update: shared library error

Soon after installing the latest Security and Operating System Updates, I discovered that I could no longer run Microsoft Office. I get the following error message when attempting to open any of the components: Application Launch Failure The application "Word" could not be launched because of a shared library error: "3<Microsoft Word><CarbonLib><CFMPriv_CommonPanels>" I have tried reinstalling the updates but it hasn't helped. I can't reinstall Office because the same error message comes up when I try to open the Microsoft installer. Can anyone help? I'm stuck. Thanks.

Again, thanks.
It's somewhat confusing. The folder /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework
contains 3 items, a gray screen marked Common Panels with a small arrow pointing to the lower left edge, a folder marked Versions (which holds folders marked A and Current), a folder marked Current (which has a small arrow pointing to the lower left edge and holds a gray screen marked Common Panels and a folder marked Resources) and a folder marked A (which also contains a gray screen marked Common Panels and a folder marked Resources. When I click the gray screen marked Common Panels, I get a message that there is no default application specified to open the document "CommonPanels".
I'm not sure what all that means. Are there too many Common Panel screens? Does the small arrow have any significance? I've also discovered that, in addition to not being able to run Office, I can't install any new applications (same CarbonLib error message). If you think I need to archive and install the System, I can try to do so.

Application launch failed. Ensure that the device screen is unlocked - after the phone update

I have the following error "
Error 1 Application launch failed. Ensure that the device screen is unlocked and device is developer unlocked. For details on developer unlock, visit http://go.microsoft.com/fwlink/?LinkId=195284. 0 0
I'm pretty sure it happened after the last update. I was able to use my phone as a dev one before
and my account shows it as a registered device.
The OS version is 7.10.8107.79.
The steps that I tired
-Registered again my phone with the registration tool
-Check the issue with Zune auto-launcher (zune isn't syncing and the phone is connected)
-Close and start everything again
Other possible issues
- Do I have to have sdk 7.1 to deploy?
- Do I have to wait 24h for registration?

You should be using SDK 7.1 anyway, so install that.
After the update, the phone may have locked itself. This may not be reflected in your AppHub account though. Using the Developer Registration Tool, register the device, unregister it, then register it again.

Sftdcc.exe does not timeout after closure of application launched via GP in kiosk mode.

We are configuring a group policy to launch an application upon login to the Remote Desktop Server.
The following group policy object is configured;
User Configuration\Policies\Administrative Templates\Windows Components/Remote Desktop Services/Remote Desktop Session Host/Remote Session Environment
By default, Remote Desktop Services sessions provide access to the full Windows desktop, unless otherwise specified with this setting, by the server administrator, or by the user
in configuring the client connection. Enabling this setting overrides the "Start Program" settings set by the server administrator or user. The Start menu and Windows Desktop are not displayed, and when the user exits the program the session is automatically
logged off.
Start a program on connection - Enabled
Program path and file name "C:\Program Files (x86)\Microsoft Application Virtualization Client\sfttray.exe" /launch "universe 1"
Working Directory
This has also been tested running Notepad.exe
The application launches successfully.
Upon exiting the application the App-V client shuts the application down successfully but the RDS session does not log the user out or end the RDS session. The sftdcc.exe process
does not timeout.
Using Task Manager to end the sftdcc.exe process initiates the logout process.
Is the following still valid for Server 2008 R2 and App-V v4.6 x64?
Can’t find any reference to it via;
http://technet.microsoft.com/en-us/library/dd464849.aspx
How To Deal With Microsoft App-V sftdcc.exe when Sessions are not closed properly After installing Microsoft App-V for terminal servers
users sessions are not closed properly after logoff. You can see through the Citrix Advanced Management Console that the session is in disconnected state and sftdcc.exe is running in the user session.
There are two registry keys you can set for this problem to disappear:
HKEY_LOCAL_MACHINE\Software\Softricity\SoftGrid Client\CurrentVersion\Configuration\
Value Name: DCCSeamlessTimeout
Type: REG_DWORD
String: 0
I have tried adding the DCCSeamlessTimeout to the HKLM\Software\Wow6432Node\Microsoft\Softgrid\4.5\Client\Configuration
but this does not have any effect.

Updates on this issue.
if you are running window server 2008 R2 install this hot fix:
KB2815716-v2-x64
then add this registry values:
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\SysProcs" /v sftdcc.exe /t REG_DWORD /d 0
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\SysProcs" /v splwow64.exe /t REG_DWORD /d 0
then reboot, and that will fix it.
if you are running 2012 r2, then only add the registry values and reboot.
Mohsen Almassud

Newbie here with automatic update problem.

Hi everyone,
I just purchased a palm centro for sprint and so far I really like it. The problem is every morning when I get up there is this message...
Sorry, your secheduled automatic updte did not complete successfully because a connection could not be establised--32485
Can anyone help me with this? I would appreciate any advice. Thanks.
Leila
Post relates to: Centro (Sprint)

Hello Leila and welcome to the Palm forums.
This is likely an error message from the My Centro application of the Palm Software (store) application. The problem is that one or both of these applications is waking up while you're asleep and trying to check for content updates (not really needed in my opinion) and the Internet connection on your phone is currently closed.
I don't use either of these applications on my Treo 755p (My Centro is called My Treo). If you launch these apps on your Centro, and then press the Menu button on your keyboard you should be be able to access the menu item that controls software updates and turn off the updates.
Other applications on your Centro may also be looking to check for updates. I would also check Pocket Tunes (pTunes) to see if it is looking for updates also.
Hope that helps,
Alan G
Post relates to: Treo 755p (Sprint)

Application Launch Failure error when launching various apps

When trying to open several different apps, an error message "Application Launch Failure" displays. The text of the message is:
The application "Flash Professional" could not be launched because of a shared library error: "<Flash> <CarbonLib> <CFMPriv_OpenScripting> "
The application listed depends on the one I am trying to launch. For example, when I try to launch Word the message is:
The application "Word" could not be launched because of a shared library error: "<Word> <CarbonLib> <CFMPriv_OpenScripting> "
I have not made any recent changes to my system and do not know how to resolve. Any suggestions?
Thanks!

I am having the same issue with my Mac Power PC G4. "The application Excel could not be launched because of a shared library error: 2<application><CarbonLib><CFMPriv_LaunchServices>"
I was reading your advice above. I don't have Leopard yet, so I was hoping there was a way to fix this problem with out moving to Leopard.
Also one more thing. This problem started after I did the newest Safari update. Not sure if that has anything to do with it, just thought you might need to know that.
Any help you could give me would be great!

Application Launch Failure (Excel, Word and some other programs)

Error message on the screen:
Application Launch Failure
The application "Word" could not be launched because of a shared Library error: "<Microsoft Word><Microsoft Word><CarbonLib>"
Console Message:
10/10/09 9:21:15 PM [0x0-0xd40d4].com.microsoft.Word[1477] /Applications/Microsoft Office 2004/Microsoft Word[1477] Launch failed with error code -2804 (cfragNoLibraryErr) for application /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp
10/10/09 9:21:15 PM com.apple.launchd[1334] ([0x0-0xd40d4].com.microsoft.Word[1477]) Exited with exit code: 12
This also happens with Excel, Word and some other programs.
Anyone have any ideas?

Oops, I should have mentioned that I've repaired permissions both from a DVD bootup as well as from the current hard drive. I reinstalled the last update.
I have Time Machine so I guess I could go back to a previous state if I knew what the problem was.

Application launcher update problem

Similar Messages

Maybe you are looking for