Application Loader error, how to submit app for approval

Firstly, here's my info:
1) App is for iPad and iPhone/iPod Touch
2) Build using Flash CS 5 (Windows), packaged using Air 2.6 using ADT.
3) Successfully build and tested my .ipa file.
4) I just got a Mac OSX (I'm new to Mac) for submitting to Apple for approval.
When I submit my app using the Application Loader:
Error is: "Application failed codesign verification. The signature was invalid, or it was not signed with an Apple submission cartificate"
(read that I need to rename my .ipa to .zip and submit that, but it still gave the error)
Forgive me if this has been answered before, but it's bits and pieces of tips all over.
And I don't understand why I need to manually hack files when Adobe claims Flash can develope apps for iOS.
- ok, yes Flash can develope iOS apps, but with that statement, don't we all presume we can also submit it to the App store?
I've spent months optimizing the app from PFI builds to now using AIR 2.6.
Bought all the devices to test on. Now that I'm ready to submit it to Apple, I'm hitting the wall again.
I've gone through lots of tips but none works for me.
Can someone give step by step instructions?
Thanks,
-alfred

Ok, it was sweet while it lasted
Apple sent an email:
"Invalid Signature - Make sure you have signed your application with a distribution certificate, not an ad hoc certificate or a development certificate. Verify that the code signing settings in Xcode are correct at the target level (which override any values at the project level). Additionally, make sure the bundle you are uploading was built using a Release target in Xcode, not a Simulator target. If you are certain your code signing settings are correct, choose "Clean All" in Xcode, delete the "build" directory in the Finder, and rebuild your release target."
I'm sure I used the Distribution certs.
Since I'm using Flash and not Xcode, what are the possible problems?
I used adt -package -target ipa-app-store ....
-alfred

Similar Messages

How to submit feedback for approval

Hi,
I want to send the feedback of a document for approval .
I can able to get feedback for a particular document using the following method
IResourceList list = feedbackService.getFeedback(aResource).
I need to know how to submit that feedback for approval.
all helps will be appriciated
Regards,
Shanthakumar

Ok, it was sweet while it lasted
Apple sent an email:
"Invalid Signature - Make sure you have signed your application with a distribution certificate, not an ad hoc certificate or a development certificate. Verify that the code signing settings in Xcode are correct at the target level (which override any values at the project level). Additionally, make sure the bundle you are uploading was built using a Release target in Xcode, not a Simulator target. If you are certain your code signing settings are correct, choose "Clean All" in Xcode, delete the "build" directory in the Finder, and rebuild your release target."
I'm sure I used the Distribution certs.
Since I'm using Flash and not Xcode, what are the possible problems?
I used adt -package -target ipa-app-store ....
-alfred

Application Loader ERROR ITMS-90072: "The IPA is invalid. It does not include a Payload directory."

Hello -
The below error is being received when submitting an app via Application Loader (3.0).
Application Loader ERROR ITMS-90072: "The IPA is invalid. It does not include a Payload directory."
Has anyone encountered this issue? If so, please advise on how to resolve.
Many thanks in advance.

This is an error with Apple's submission verification and you will need to open a developer support request with them. See Re: "Invalid Bundle." "...viewer.app does not support the minimum OS version specified in the Info.plist" for more details.
Neil

7940g application load error

Hi guys
I've recently purchased a 7940 ip phone of ebay in the hopes to familiarise myself with voice. Now i have been tinkering with various things but im still very much a newbie when it comes to telephony so please try and explain as much as possible it would help us all.
Now my problem is that when i plugged the phone in and connected it to my network the phone fails to boot and always has the error application load error, i plugged the phone into my pc and setup a tftp to see what files it was requesting from the server. the phone tries to request the following files
MGC001563383F61.cnf
SIP001563383F61.cnf
SEP001563383F61.cnf.xml
CTLSEP001563383F61.tlv
MGCDefault.cnf
SIPDefault.cnf
XMLDefault.cnf
after doing some reading im under the impression the phone should ask for either MGC, SIP or a SEP cnf file.
so my question is
does the phone require new firmware loading onto it
how do i go about changing the firmware
Again i am a newbie so please go easy, just a nudge a right direction and i should be able to sort the issue.
thanks in advance
Josh

Welcome to the world of VoIP.
Your phone will need to connect to something in order to get the files it needs. It will need to know where to go to get them. Normally in a voice environment, the DHCP server provides the IP address of the TFTP server using Option 150.
Most Cisco phones are used with a Cisco CallManager (server based) environment, or CallManager Express (router based) environment. The TFTP address is normally the address of one of these devices that is also hosting the TFTP services.
So the question would be:
1. Are you running CallManager, CallManager Express (CME), or something else? If something else, then what?
2. Did you set up an option 150 in DHCP for the phone? If not, did you manually assign the TFTP address on the phone itself?
Answer those two questions, and we can figure out the next steps.
Cliff

Re: how to get apps for iphone 3g 4.2.1

Re: how to get apps for iphone 3g 4.2.1 all apps support higher version help....
Sep 24, 2013 6:34 AM (in response to Rajmit)
I still have an old 3G which I use mostly as a ipod/radio. By accident I found you can overide the i-tunes block.
1. Select Apps in Apps store icon on the phone.
2. Choose App to download
3. At "Instal" button press it QUICKLY in blocks of 3 presses, keep doing this until it overides the i-tune warning, then if there were legacy versions for os 4.2.1 it says something like "this app is for os 5 or above", but gives you a choice to download an older version. Select this.
Sometimes it says the Apps is for newer hardware, requiring motion sensors, front camera's etc.. just got to accept these ones don't work on legacy hardware.
4. Download does not work for all Apps, esp. newer ones written after os 4.21 or if the developer doesn't have the vintage apps archived- e.g. Instagram downloads, but won't run (wants to update), or WSJ and Barrons stalls and goes through a download loop.
I am not making this up, as I bought this old 3g unit on e-bay, after a complete factory reset I now have:
- Tune-in, FB, Pandora,Skype, Twitter, Bloomberg, MSNBC, Forbes, Marketwatch, Viber, amongst a host of other news apps like LATimes.
Some Apps will download ok, and then at activation says its too old and no longer supported e.g Whats App.
Otherwise, good luck. Tune-in, Pandora, Skype and Twitter is all I need to keep me happy with an old unit, even though I've got newer hardware. Never let anything die unnaturally.

I still have an old 3G which I use mostly as a ipod/radio. By accident I found you can overide the i-tunes block.
1. Select Apps in Apps store icon on the phone.
2. Choose App to download
3. At "Instal" button press it QUICKLY in blocks of 3 presses, keep doing this until it overides the i-tune warning, then if there were legacy versions for os 4.2.1 it says something like "this app is for os 5 or above", but gives you a choice to download an older version. Select this.
Sometimes it says the Apps is for newer hardware, requiring motion sensors, front camera's etc.. just got to accept these ones don't work on legacy hardware.
4. Download does not work for all Apps, esp. newer ones written after os 4.21 or if the developer doesn't have the vintage apps archived- e.g. Instagram downloads, but won't run (wants to update), or WSJ and Barrons stalls and goes through a download loop.
I am not making this up, as I bought this old 3g unit on e-bay, after a complete factory reset I now have:
- Tune-in, FB, Pandora,Skype, Twitter, Bloomberg, MSNBC, Forbes, Marketwatch, Viber, amongst a host of other news apps like LATimes.
Some Apps will download ok, and then at activation says its too old and no longer supported e.g Whats App.
Otherwise, good luck. Tune-in, Pandora, Skype and Twitter is all I need to keep me happy with an old unit, even though I've got newer hardware. Never let anything die unnaturally.

Power book not loading (error: unable to find driver for this platform) help me please

power book not loading (error: unable to find driver for this platform) help

That usually happens when trying to install Mac software intended for Intel-powered Macs (made in 2006 through present) on a PowerPC mac like teh powerbook (made before 2006).
You post is a little cryptic, however. We may be of further help if you can tell us:
<> the PowerBook's processor type (G3 or G4) and the Mac OS version, both available by doing "About the Mac" from your Apple menu.
<> what program and its version your were trying to run and/or install.

How to update apps for my iPOD

How to update apps for my iPOD

On the iPod go to App store app and tap Updates in lower right. Then tap on Update all or update individual ones.
Note that if yo do not have iOS 6, you may not be able to update the the latest version of some apps since some require iOS 4.3 or higher. some iOS 5 or higher or some iOS 6.

Hi i dont have a wifi broadband n i just bought the new ipod touch can anyone tell me how 2 download apps for my ipod without using wifi

hi i dont have a wifi broadband n i just bought the new ipod touch can anyone tell me how 2 download apps for my ipod without using wifi

Download the apps on your syncing computer and then sync to the iPod. Note that you can only sync apps for the one syncing computer you use with the iPod. You can manage music and videos among different computer.

How to manage apps for lots of devices

Hi, I work @ all college in AU. We are implementing ipads as a study tool. Initially the ipads will be set up by the college, then distributed to the students to keep.
My question is about how to manage apps for so many devices. For example we have 2 apps that need to be installed for 150 units to begin with. This could get quite messy I would think. Has anyone had any experience with this sort of volumes? Any and all input would be greatly appreciated.

Look in the forum above this one...
http://discussions.apple.com/thread.jspa?threadID=2594001&tstart=0

Hi where can I learn how to develop app for ios in Singapore?

I am new to iOS development. Are there any courses from apple or elsewhere in Singapore that I can learn how to develop apps for iPad and iPhone platform?
Thanks.

There are a number of good resources. Stanford did indeed start up the iOS development class again, but the registration period has passed. You can stilll download the material and do a self-study, though:
https://itunes.apple.com/us/course/coding-together-developing/id593208016
There are also Apple's materials, the primary source of development information:
https://developer.apple.com/devcenter/ios/index.action
If you do a web search for "iOS development", you'll find a number of other sites that should be of help.
Regards.

Hi,When I submit the budget for approval, it is approved and base lined when we submit it for approval. It does not go in approval hierarchy. We want it to flow through approval hierarchy.

Hi,When I submit the budget for approval, it is approved and base lined when we submit it for approval. It does not go in approval hierarchy. We want it to flow through approval hierarchy.

Hi Amit,
if I understand correctly, you just need for a particular object a tooltip to be showed.
There is no such functionality hence you used the trick of using a hyperlink, which if clicked generates undesired behavior.
Hyperlinks don't allow themselves to be disabled, therefore if you are using that workaround you must cope with that.
I would suggest to create an Idea at [https://ideas.sap.com] for having in the properties of an object a tooltip, then post the link to the idea here and other users will vote if they like the idea.
Thanks and regards,
Simone

Application Loader : Error ITMS-9000. Invalid Bundle

I have created an app with Adobe DPS. I tried to submit it with the Application Loader. I got "error ITMS-9000 "invalid Bundle.The bundle viewer.app does not support the minimum OS Version specified in the Info.plist."
Also an exclamation mark with "The app references non-public selectors in viewer.app/viewer: consume:
and
WARNING ITMS-9000: "The executable 'viewer.app' is not a Position Independent Executable. Please ensure that your build settings are configured to create PIE executables. For more information refer to Technical Q&A QA1788 - Building a Position Independent Executable in the iOS Developer Library."
Does anyone know how to deal with this?

This is an error with Apple's submission verification and you will need to open a developer support request with them. See Re: "Invalid Bundle." "...viewer.app does not support the minimum OS version specified in the Info.plist" for more details.
Neil

Application Loader Error ITMS-90125

When i try to send my multi-folio app to store using application loader, i get "ERROR ITMS-90125 "The binary is invalid. The encryption info in the LC_ENCRYPTION_INFO load command is either missing or invalid, or the binary is already encrypted. This binary does not seem to have been built with Apple's linker. "
The zip file was generated in the DPS Builder.
What can i do? Any suggestions?
Thanks for any help.

Hey
I've got the same issue and it's been impossible to upload my Zip app to Application Loader. I've checked that I have the most update version, which I have. I've even deleted it and install the online version. Same issue. I've rebuilt my app several time. Same issue.
Any idea as it is being urgent?
How have you solve your issue guys?

Adobe flash: iOS application loader error, error itms-90179 & itms-90096

Hi,
I made ipa file via flash pro cc 2014, then uploaded using application loader which is provided from Apple. (I don't use Adobe Flash Builder.)
The application loader shows 2 errors as below.
- I use the distribution provisioning profile, not the development provisioning profile.
- I made 960*640 app and it's OK on my iPhone 5. (Flash automatically generates the black space on the both sides.) Should I change my resolution for iPhone 5(1136*640)? If so, how can I support iPhone 4?

I solved 90096 error by adding [email protected] file to my root folder which has the .fla file.
I also added this image to Air for iOS settings > General > included file.

Apple Application Loader error

Hello, I have a big problem trying to upload to the App Store my application.
I have compiled and packaged a new version of my app with AIR 3.0, previusly with AIR 2.7. When Application Loader makes the package check it tells me the following error:
iPhone / iPod Touch application is missing a required executable architecture. At least one of the Following architecture (s) Must be present: armv6
I have checked the Info.plist and appears armv7, I specified that also includes the armv6, and has been included, but still shows the same error.
I tried to recompile with AIR 2.7 and upload it, but gives the same error.
Has this happened to anyone? Any solution?.
Thank you!!

Unfortunately you have run into one of the App Store rules; you can't submit an update that drops support for devices that were able to run the app. By using AIR 2.7 or 3.0 you are ruling out devices such as the iPhone 3G, which presumably your original app supported.
You only have a couple of choices. Either take the FLA as CS5 and publish it from there (or the command line using PFI), or, submit it as a new app.
If it's a free app then there's not much issue, that's what the We Rule guys did a lot in the early days, just a slight app rename, and users would download the new app and throw away the old one. If it's a paid app you have to find a way to make a new version without upsetting old users. One idea I've suggested in the past is that as you can now support Retina display, you could call this one the "HD" version. If you start it off with a low intro price, hopefully original app users will cope with the switch.

Application Loader error, how to submit app for approval

Similar Messages

Maybe you are looking for