Apple Application Loader error

Hello, I have a big problem trying to upload to the App Store my application.
I have compiled and packaged a new version of my app with AIR 3.0, previusly with AIR 2.7. When Application Loader makes the package check it tells me the following error:
iPhone / iPod Touch application is missing a required executable architecture. At least one of the Following architecture (s) Must be present: armv6
I have checked the Info.plist and appears armv7, I specified that also includes the armv6, and has been included, but still shows the same error.
I tried to recompile with AIR 2.7 and upload it, but gives the same error.
Has this happened to anyone? Any solution?.
Thank you!!

Unfortunately you have run into one of the App Store rules; you can't submit an update that drops support for devices that were able to run the app. By using AIR 2.7 or 3.0 you are ruling out devices such as the iPhone 3G, which presumably your original app supported.
You only have a couple of choices. Either take the FLA as CS5 and publish it from there (or the command line using PFI), or, submit it as a new app.
If it's a free app then there's not much issue, that's what the We Rule guys did a lot in the early days, just a slight app rename, and users would download the new app and throw away the old one. If it's a paid app you have to find a way to make a new version without upsetting old users. One idea I've suggested in the past is that as you can now support Retina display, you could call this one the "HD" version. If you start it off with a low intro price, hopefully original app users will cope with the switch.

Similar Messages

HT4061 I have loaded on my lap top, unistalled and reinstalled itunes and keep getting Apple application support error 2. Any suggestions?

I have loaded itunes on my laptop, unistalled and reinstalled and keep getting "Apple Application support" error 2. Any suggestions?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if Apple Application Support won't install normally.
tt2

Adobe AIR 3.0 application loader error

I am trying to submit an update to my app using the Apple Application Loader. The prevous version of my app was made with an early version of Adobe AIR about a year ago.
My problem is when I upload my app I get an error, "The key UIRequiredDeviceCapabilities in the info.plist may not contain values that would prevent this application from running on devices not supported by previous versions".
I have edited the UIRequiredDeviceCapabilities key in the Infoadditions of the xml document. I included the camera and microphone capabilities so the app would only run on the iPod Touch 4th gen but this would still allow it to run on older iPhone models.
Are there any additional changes I need to make to be able to submit this app update?

Your earlier version may have been done with Flash CS5, which means it would run on armv6 devices, now it only runs on armv7 devices. You only have the choice of publishing it in CS5, or make it be a new app.

Application Loader ERROR ITMS-90072: "The IPA is invalid. It does not include a Payload directory."

Hello -
The below error is being received when submitting an app via Application Loader (3.0).
Application Loader ERROR ITMS-90072: "The IPA is invalid. It does not include a Payload directory."
Has anyone encountered this issue? If so, please advise on how to resolve.
Many thanks in advance.

This is an error with Apple's submission verification and you will need to open a developer support request with them. See Re: "Invalid Bundle." "...viewer.app does not support the minimum OS version specified in the Info.plist" for more details.
Neil

Application Loader error, how to submit app for approval

Firstly, here's my info:
1) App is for iPad and iPhone/iPod Touch
2) Build using Flash CS 5 (Windows), packaged using Air 2.6 using ADT.
3) Successfully build and tested my .ipa file.
4) I just got a Mac OSX (I'm new to Mac) for submitting to Apple for approval.
When I submit my app using the Application Loader:
Error is: "Application failed codesign verification. The signature was invalid, or it was not signed with an Apple submission cartificate"
(read that I need to rename my .ipa to .zip and submit that, but it still gave the error)
Forgive me if this has been answered before, but it's bits and pieces of tips all over.
And I don't understand why I need to manually hack files when Adobe claims Flash can develope apps for iOS.
- ok, yes Flash can develope iOS apps, but with that statement, don't we all presume we can also submit it to the App store?
I've spent months optimizing the app from PFI builds to now using AIR 2.6.
Bought all the devices to test on. Now that I'm ready to submit it to Apple, I'm hitting the wall again.
I've gone through lots of tips but none works for me.
Can someone give step by step instructions?
Thanks,
-alfred

Ok, it was sweet while it lasted
Apple sent an email:
"Invalid Signature - Make sure you have signed your application with a distribution certificate, not an ad hoc certificate or a development certificate. Verify that the code signing settings in Xcode are correct at the target level (which override any values at the project level). Additionally, make sure the bundle you are uploading was built using a Release target in Xcode, not a Simulator target. If you are certain your code signing settings are correct, choose "Clean All" in Xcode, delete the "build" directory in the Finder, and rebuild your release target."
I'm sure I used the Distribution certs.
Since I'm using Flash and not Xcode, what are the possible problems?
I used adt -package -target ipa-app-store ....
-alfred

Apple Application Loader says..: "The bundle is invalid."

Hello
I´m trying to publish a nem APP in the Apple Store.
I´m using the Apple Application Loader.
The application Loader do not accept my ZIP file, and returns the following message:
ERROR ITMS-90059: "This bundle is invalid. The value for key CFBundleVersion [32.4.300.172.100878] in the Info.plist file must be no longer than 18 characters."
ERROR ITMS-90133: "This bunde is invalid. The info.plist key CFBundleVersion is longer than the maximum permitted length of 18."
The zip file was generated in the DPS Builder. I´m not sure about what I´m doing wrong. Actually I don't know exactly what it means "Bundle Version" and how can I change this value
Thanks for any help.

Please see this thread: Apple Application Loader says..: "The bundle is invalid."

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2. How can I fix this?

I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2. How can I fix this? I have uninstalled and reinstalled it several times and it still doesn't work.

What computer do you have? is it 32 or 64 bit operating system?

I keep getting apple application support error 2 code after installing itunes

I installed itunes on windows 8. Can't get into it because of error pop up - apple application support error 2. Don't know what to do about this. Please help !

Hi teri 5859,
If you are having launch issues with iTunes on your Windows machine, you may find the following article helpful:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
If the issue persists, you may want to try completely uninstalling and reinstalling iTunes:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Regards,
- Brenden

I was getting the message missing msvcr80.dll so i did everything it said too and now it says i am missing apple application support error 2

i had a message that said i was missing msvcr80.dll and i did everything it said to and now it says i am missing apple application support error 2. how do i fix this

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

My kids reset my ipod touch i have a Toshiba laptop i tried downloading i tunes but an error comes up Apple application support Error 2 what do i do

my kids reset my ipod touch i have a Toshiba laptop i tried downloading i tunes but an error comes up Apple application support Error 2 what do i do

Issues installing iTunes or QuickTime for Windows
iTunes 11.1.4 for Windows: Unable to install or open
Troubleshooting issues with iTunes for Windows updates
If still problem post in the iTunes for Windows forum
https://discussions.apple.com/community/itunes/itunes_for_windows

Apple application support error 2 (windows 7 error 2)

I get the following error when I try to launch iTunes "apple application support error 2 (windows 7 error 2)". I have uninstalled and reinstalled iTunes several times and still I get that same error message. I have also right clicked on the desk top icon and pressed "run as administrator".What do I need to do to fix this problem?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if Apple Application Support won't install normally.
tt2

7940g application load error

Hi guys
I've recently purchased a 7940 ip phone of ebay in the hopes to familiarise myself with voice. Now i have been tinkering with various things but im still very much a newbie when it comes to telephony so please try and explain as much as possible it would help us all.
Now my problem is that when i plugged the phone in and connected it to my network the phone fails to boot and always has the error application load error, i plugged the phone into my pc and setup a tftp to see what files it was requesting from the server. the phone tries to request the following files
MGC001563383F61.cnf
SIP001563383F61.cnf
SEP001563383F61.cnf.xml
CTLSEP001563383F61.tlv
MGCDefault.cnf
SIPDefault.cnf
XMLDefault.cnf
after doing some reading im under the impression the phone should ask for either MGC, SIP or a SEP cnf file.
so my question is
does the phone require new firmware loading onto it
how do i go about changing the firmware
Again i am a newbie so please go easy, just a nudge a right direction and i should be able to sort the issue.
thanks in advance
Josh

Welcome to the world of VoIP.
Your phone will need to connect to something in order to get the files it needs. It will need to know where to go to get them. Normally in a voice environment, the DHCP server provides the IP address of the TFTP server using Option 150.
Most Cisco phones are used with a Cisco CallManager (server based) environment, or CallManager Express (router based) environment. The TFTP address is normally the address of one of these devices that is also hosting the TFTP services.
So the question would be:
1. Are you running CallManager, CallManager Express (CME), or something else? If something else, then what?
2. Did you set up an option 150 in DHCP for the phone? If not, did you manually assign the TFTP address on the phone itself?
Answer those two questions, and we can figure out the next steps.
Cliff

Can not upload my ipa with Apple Application Loader

After I published with success a new .ipa with DPS when I tried to upload with Application Loader, the system refused my app.
In the past I never had this problem since last week it is impossible until now.
When I asked help the Apple developer assistance, says:
The error you’re receiving now does make sense that it was caused by the Adobe DPS program. Sometimes when using 3rd party app builders it will cause a similar error when attempting to upload a new app or update.
Unfortunately Apple does not support 3rd party app builders, and I would suggest contacting the support group at Adobe in regards to DPS and what setting you need to adjust within the program to successfully upload the app.
When contacting them be sure to have the description of the error ready for them. I’ve seen this similar case with previous developers that have used the Adobe app builder, and have reached a resolution with contacting them.
What can I do?
Thank you in advance.
Silvia

Application Loader : Error ITMS-9000. Invalid Bundle

I have created an app with Adobe DPS. I tried to submit it with the Application Loader. I got "error ITMS-9000 "invalid Bundle.The bundle viewer.app does not support the minimum OS Version specified in the Info.plist."
Also an exclamation mark with "The app references non-public selectors in viewer.app/viewer: consume:
and
WARNING ITMS-9000: "The executable 'viewer.app' is not a Position Independent Executable. Please ensure that your build settings are configured to create PIE executables. For more information refer to Technical Q&A QA1788 - Building a Position Independent Executable in the iOS Developer Library."
Does anyone know how to deal with this?

This is an error with Apple's submission verification and you will need to open a developer support request with them. See Re: "Invalid Bundle." "...viewer.app does not support the minimum OS version specified in the Info.plist" for more details.
Neil

Apple Application Loader error

Similar Messages

Maybe you are looking for