Application server not starting - I have given the dispatcher log below

trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid P1D
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 2800
Wed Apr 07 16:09:05 2010
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2800) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Apr 07 16:09:10 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >blrkec115278d_P1D_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06640040, size: 4653368)
DpShMCreate: allocated sys_adm at 06640040
DpShMCreate: allocated wp_adm at 06641E40
DpShMCreate: allocated tm_adm_list at 066465C0
DpShMCreate: allocated tm_adm at 066465F0
DpShMCreate: allocated wp_ca_adm at 06A15890
DpShMCreate: allocated appc_ca_adm at 06A1B650
DpShMCreate: allocated comm_adm at 06A1D590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06A9E450
DpShMCreate: allocated gw_adm at 06A9E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06A9E4C0
DpShMCreate: allocated wall_adm at 06A9E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1216
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:11 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:12 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:13 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:14 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:15 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:16 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:17 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:272 HANDLE:1560)
[DpProcDied] Process died (PID:1216 HANDLE:1540)
DpStartStopMsg: send stop message (myname is >blrkec115278d_P1D_00 <)
NiIMyHostName: hostname = 'blrkec115278d'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Wed Apr 07 16:10:18 2010
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1484 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1484 (pos=3)
SiSelNRemove: removed sock 1484
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1484
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2800) [dpxxdisp.c 10259]
Good Bye .....

trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Wed Apr 07 16:09:10 2010
B  create_con (con_name=R/3)
B  Loading DB library 'D:\usr\sap\P1D\DVEBMGS00\exe\dboraslib.dll' ...
B  Library 'D:\usr\sap\P1D\DVEBMGS00\exe\dboraslib.dll' loaded B  Version of 'D:\usr\sap\P1D\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73) B  New connection 0 created
M sysno      00
M sid        P1D
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    75
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        3784
M
M  kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC) M  length of sys_adm_ext is 572 bytes
M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3784) [dpxxdisp.c   1299]
I  MtxInit: 30000 0 0
M  DpSysAdmExtCreate: ABAP is active
M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active M  DpShMCreate: sizeof(wp_adm)  18304 (1408) M  DpShMCreate: sizeof(tm_adm)  3994272 (19872) M  DpShMCreate: sizeof(wp_ca_adm)  24000 (80) M  DpShMCreate: sizeof(appc_ca_adm) 8000 (80) M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M  DpShMCreate: sizeof(comm_adm)  528064 (1048) M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M  DpShMCreate: sizeof(file_adm)  0 (72) M  DpShMCreate: sizeof(vmc_adm)  0 (1440) M  DpShMCreate: sizeof(wall_adm)  (38456/34360/64/184) M  DpShMCreate: sizeof(gw_adm) 48 M  DpShMCreate: SHM_DP_ADM_KEY  (addr: 06640040, size: 4653368) M  DpShMCreate: allocated sys_adm at 06640040 M  DpShMCreate: allocated wp_adm at 06641E40 M  DpShMCreate: allocated tm_adm_list at 066465C0 M  DpShMCreate: allocated tm_adm at 066465F0 M  DpShMCreate: allocated wp_ca_adm at 06A15890 M  DpShMCreate: allocated appc_ca_adm at 06A1B650 M  DpShMCreate: allocated comm_adm at 06A1D590 M  DpShMCreate: system runs without file table M  DpShMCreate: allocated vmc_adm_list at 06A9E450 M  DpShMCreate: allocated gw_adm at 06A9E490 M  DpShMCreate: system runs without vmc_adm M  DpShMCreate: allocated ca_info at 06A9E4C0 M  DpShMCreate: allocated wall_adm at 06A9E4C8 X  EmInit: MmSetImplementation( 2 ).
X  MM global diagnostic options set: 0
X  <ES> client 0 initializing ....
X  Using implementation flat
M  <EsNT> Memory Reset disabled as NT default X  ES initialized.
M
M Wed Apr 07 16:09:11 2010
M  ThInit: running on host blrkec115278d M M Wed Apr 07 16:09:12 2010 M  calling db_connect ...
C  Prepending D:\usr\sap\P1D\DVEBMGS00\exe to Path.
C
C Wed Apr 07 16:09:13 2010
C  Oracle Client Version: '10.2.0.1.0'
C  Client NLS settings: AMERICAN_AMERICA.UTF8 C  Logon as OPS$-user to get SAPSR3's password C  Connecting as /@P1D on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   06BF10F8   06BF6694   06BF5F1C
C  Attaching to DB Server P1D (con_hdl=0,svchp=06BF5E68,svrhp=06C07734)
C
C Wed Apr 07 16:09:14 2010
C  *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
[dboci.c      4172]
C  *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c    10933]
C  Try to connect with default password
C  Connecting as SAPSR3/<pwd>@P1D on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   06BF10F8   06BF6694   06BF5F1C
C  Detaching from DB Server (con_hdl=0,svchp=06BF5E68,srvhp=06C07734)
C  Attaching to DB Server P1D (con_hdl=0,svchp=06BF5E68,svrhp=06C07734)
C
C Wed Apr 07 16:09:16 2010
C  *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
[dboci.c      4172]
C  *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c    10933]
B  ***LOG BY2=> sql error 12541  performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B  ***LOG BY0=> ORA-12541: TNS:no listener [dbsh#2 @ 1204] [dbsh    1204 ]
B  ***LOG BY2=> sql error 12541  performing CON [dblink#3 @ 431] [dblink  0431 ] B  ***LOG BY0=> ORA-12541: TNS:no listener [dblink#3 @ 431] [dblink  0431 ]
M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
M  in_ThErrHandle: 1
M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10156]
M
M  Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = V-1
M
M  *****************************************************************************
M  *
M  *  LOCATION    SAP-Server blrkec115278d_P1D_00 on host blrkec115278d (wp 0)
M  *  ERROR       ThInit: db_connect
M  *
M  *  TIME        Wed Apr 07 16:09:16 2010
M  *  RELEASE     700
M  *  COMPONENT   Taskhandler
M  *  VERSION     1
M  *  RC          13
M  *  MODULE      thxxhead.c
M  *  LINE        10354
M  *  COUNTER     1
M  *
M  *****************************************************************************
M
M  PfStatDisconnect: disconnect statistics M  Entering TH_CALLHOOKS M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260] M  Entering ThSetStatError M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0) M  Entering ThReadDetachMode M  call ThrShutDown (1)...
M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 3784) [dpnttool.c   327]

Similar Messages

  • Iplanet application server not starting

    I am trying to deploy an application on weblogic server..........when i stop my weblogic server and look into another application which is on iplanet server the application server doesnot start .
    and gives me the following error
    " [19/Apr/2005 14:30:36:2] error: DSYNC-004: ''GetRoleOfCurrentEngine'': No Primary; Synchronizer will operate in Standalone mode
    [19/Apr/2005 14:30:36:2] info: LCYCMGR-002: registered component of type Dsync2 "
    Are there some compliance issues when u have 2 different application servers on 1 pc.
    any other suggestions would be appreciated
    -raj

    Hi,
    I was able to resolve this issue earlier with the below reference.
    please check the doc ID 657411.1 on oracle support .(E-AS: exec PSSRCHSRV: CMDTUX_CAT:1685: ERROR: Application initialization failure [ID 657411.1])
    It says the error might be because of the Add to Path.
    check if this helps you in resolving the issue.
    Shilpa

  • IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

    My IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

    Try this:
    1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.

  • Application Server not starting

    Hi All,
    I am facing issue while starting application server. Below is the error message that I am getting-
    Error while booting the domain-
    Attempting to boot ...
    Booting all admin and server processes in /projects/psoft/hr815B/appserv/gpstst03/PSTUXCFG
    INFO: TUXEDO(r) System Release 6.5
    INFO: Serial #: 101998665, Expiration NONE, Maxusers 1000000
    INFO: Licensed to: PeopleSoft
    Booting admin processes ...
    exec BBL -A :
    process id=2726 ... Started.
    Booting server processes ...
    exec PSAPPSRV -p 1,600:1,1 -s@../psappsrv.lst -s@../psqcksrv.lst -sICQuery -sSqlQuery:SqlRequest -- -C psappsrv.cfg -D gpstst03 -S PSAPPSRV :
    CMDTUX_CAT:1685: ERROR: Application initialization failure
    tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
    exec tmshutdown -y
    Shutting down all admin and server processes in /projects/psoft/hr815B/appserv/gpstst03/PSTUXCFG
    Shutting down server processes ...
    tmboot: CMDTUX_CAT:828: NLS:6: Message not found, catalog CMDTUX_CAT, set 1, num 828
    ==============ERROR!================
    Boot attempt encountered errors!. Check the TUXEDO log for details.
    ==============ERROR!================
    Do you wish to see the error messages in the APPSVR.LOG file? (y/n) [n] :
    Shutting down admin processes ...
    Server Id = 0 Group Id = usilap36 Machine = usilap36: shutdown succeeded
    1 process stopped.
    APPSRV.LOG-
    PSADMIN.28394 [09/01/10 09:43:41](0) Begin boot attempt on domain gpstst03
    PSAPPSRV.2959 [09/01/10 09:43:48](0) PeopleTools Release 8.15 (HP/UX) starting
    PSAPPSRV.2959 [09/01/10 09:43:48](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database GPSTST03 with user PS. – from Application Designer and sqlplus, we are able to login with PS ID(PS/l9admin)
    PSADMIN.28394 [09/01/10 09:43:48](0) End boot attempt on domain gpstst03
    TUXLOG-
    094342.usilap36!PSADMIN.28394: Begin boot attempt on domain gpstst03
    094346.usilap36!BBL.2726: 09012010: TUXEDO Version 6.5 HP-UX B.11.00 U 9000/898 1623623321 unlimited-user license.
    094346.usilap36!BBL.2726: LIBTUX_CAT:262: INFO: Standard main starting
    094348.usilap36!PSAPPSRV.2959: 09012010: TUXEDO Version 6.5 HP-UX B.11.00 U 9000/898 1623623321 unlimited-user license.
    094348.usilap36!PSAPPSRV.2959: LIBTUX_CAT:262: INFO: Standard main starting
    094348.usilap36!PSAPPSRV.2959: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
    094348.usilap36!tmboot.2501: 09012010: TUXEDO Version 6.5 HP-UX B.11.00 U 9000/898 1623623321 unlimited-user license.
    094348.usilap36!tmboot.2501: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
    094348.usilap36!tmboot.2501: NLS:6: Message not found, catalog CMDTUX_CAT, set 1, num 724
    094348.usilap36!PSADMIN.28394: End boot attempt on domain gpstst03
    With PS ID, we have created Process Scheduler for same domain and it's running fine.
    Please help us to resolve this issue.
    Regards,
    Pradeep

    Hi,
    I was able to resolve this issue earlier with the below reference.
    please check the doc ID 657411.1 on oracle support .(E-AS: exec PSSRCHSRV: CMDTUX_CAT:1685: ERROR: Application initialization failure [ID 657411.1])
    It says the error might be because of the Add to Path.
    check if this helps you in resolving the issue.
    Shilpa

  • APPLICATION SERVER not starting      SSO

    Hi ,
    I am not able to start our application server, the instance starts and then it shuts down.
    Following is the Log of dev_w0...
    File "/usr/sap/HSP/SYS/exe/run/libsnckrb5.so" dynamically loaded as SNC-Adapter.
    N    The Adapter identifies as:
    N    External SNC-Adapter (Rev 1.0) to Kerberos 5/GSS-API v2
    N  *** ERROR => SncPSetNewName()==SNCERR_PLAUSI  [sncxx*.c 2560]
    N        GSS-API(maj): An invalid name was supplied
    N      Cleanup: trying to release GSSAPI internal name
    N      gss_name_t="ptr: 112659610"
    N  SncInit():   found snc/identity/as=p:host/[email protected]
    N  *** ERROR => SncPAcquireCred()==SNCERR_GSSAPI  [sncxxall.c 1510]
    N        GSS-API(maj): Unspecified GSS failure.  Minor code may provide more information
    N        GSS-API(min): No principal in keytab matches desired name
    N      Could't acquire ACCEPTING credentials for

    N      name="p:host/[email protected]"
    M  *** ERROR => ErrISetSys: error info too large [err.c        945]
    Please look into it.
    Thanks
    Nitish

    Hi,
    I was able to resolve this issue earlier with the below reference.
    please check the doc ID 657411.1 on oracle support .(E-AS: exec PSSRCHSRV: CMDTUX_CAT:1685: ERROR: Application initialization failure [ID 657411.1])
    It says the error might be because of the Add to Path.
    check if this helps you in resolving the issue.
    Shilpa

  • Application server not starting on win 2000

    when i try to start the application server, the prompt dos prints the following message:
    Could not start the instance: domain1:admin-server
    server failed to start: abnormal subprocess termination
    Could not start the instance: domain1:server1
    server failed to start: abnormal subprocess termination
    Could not start one or more instances in the domain : domain1
    Could not start one or more domains
    Premere un tasto per continuare . . .

    This is roughly what the log file says... is my EE environment not properly set up???
    [24/Feb/2003:10:16:01] INFO ( 2628): CORE1116: Sun ONE Application Server 7.0
    [24/Feb/2003:10:16:04] INFO ( 2628): CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.4.0_02] from [Sun Microsystems Inc.]
    [24/Feb/2003:10:16:44] INFO ( 2628): JMS5035: Timed out after 30000 milliseconds while trying to verify if the JMS service startup succeeded.
    [24/Feb/2003:10:16:44] INFO ( 2628): JMS5036: More details may be available in the log file for the JMS service broker instance domain1_server1. Please refer to the JMS provider documentation for the exact location of this log file.
    [24/Feb/2003:10:16:44] SEVERE ( 2628): JMS5024: JMS service startup failed.
    [24/Feb/2003:10:16:44] SEVERE ( 2628): CORE5071: An error occured during initialization
    com.sun.appserv.server.ServerLifecycleException: [C4003]: Error occurred on connection creation. - caught java.net.ConnectException
         at com.iplanet.ias.jms.JmsProviderLifecycle.onInitialization(JmsProviderLifecycle.java:247)
         at com.iplanet.ias.server.ApplicationServer.onInitialization(ApplicationServer.java:206)
         at com.iplanet.ias.server.J2EERunner.confPreInit(J2EERunner.java:114)
    Caused by: com.sun.appserv.server.ServerLifecycleException: [C4003]: Error occurred on connection creation. - caught java.net.ConnectException
         at com.iplanet.ias.jms.JmsProviderLifecycle.onInitialization(JmsProviderLifecycle.java:231)
         ... 2 more
    Caused by: javax.jms.JMSException: [C4003]: Error occurred on connection creation. - caught java.net.ConnectException
         at com.sun.messaging.jmq.jmsclient.ExceptionHandler.getJMSException(ExceptionHandler.java:183)
         at com.sun.messaging.jmq.jmsclient.ExceptionHandler.handleException(ExceptionHandler.java:136)
         at com.sun.messaging.jmq.jmsclient.PortMapperClient.readBrokerPorts(PortMapperClient.java:145)
         at com.sun.messaging.jmq.jmsclient.PortMapperClient.init(PortMapperClient.java:86)
         at com.sun.messaging.jmq.jmsclient.PortMapperClient.<init>(PortMapperClient.java:47)
         at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPConnectionHandler.<init>(TCPConnectionHandler.java:46)
         at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPStreamHandler.openConnection(TCPStreamHandler.java:101)
         at com.sun.messaging.jmq.jmsclient.ProtocolHandler.init(ProtocolHandler.java:501)
         at com.sun.messaging.jmq.jmsclient.ProtocolHandler.<init>(ProtocolHandler.java:930)
         at com.sun.messaging.jmq.jmsclient.ConnectionImpl.openConnection(ConnectionImpl.java:1482)
         at com.sun.messaging.jmq.jmsclient.ConnectionImpl.init(ConnectionImpl.java:403)
         at com.sun.messaging.jmq.jmsclient.ConnectionImpl.<init>(ConnectionImpl.java:234)
         at com.sun.messaging.jmq.jmsclient.UnifiedConnectionImpl.<init>(UnifiedConnectionImpl.java:33)
         at com.sun.messaging.jmq.jmsclient.QueueConnectionImpl.<init>(QueueConnectionImpl.java:32)
         at com.sun.messaging.ConnectionFactory.createQueueConnection(ConnectionFactory.java:72)
         at com.sun.messaging.jmq.admin.jmsspi.JMSAdminImpl.pingProvider(JMSAdminImpl.java:733)
         at com.iplanet.ias.jms.JmsProviderLifecycle.waitForJmsProvider(JmsProviderLifecycle.java:284)
         at com.iplanet.ias.jms.JmsProviderLifecycle.onInitialization(JmsProviderLifecycle.java:224)
         ... 2 more
    [24/Feb/2003:10:16:44] SEVERE ( 2628): CORE3186: Failed to set configuration

  • Whenever starting Firefox I get a message. "runtime error" and firefox does not start. Have deleted the software several time and tried new dowload and start. In vain. thanks for your help

    When starting Firefox I got a message saying
    "Runtime Error! This application has requested Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
    I have unistalledFirefox several times and reinstalled 3.6 without success.
    Thanks for your help

    Refer to this article to fix:
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/TS3299

  • Application Server cannot start after restart

    Dear all,
    I have a database cluster with SAP CI running on 2 servers(on SAN), plus 4 applications.
    Today we have restarted all the servers, and found that only 1 server with database server and application server (w/CI) can start.  All other applications servers cannot start, and in SAP Management Console, it does not show the SAP Instance.
    Another problem is that the database cluster cannot move to another server, with error:
    "initerrlog: Could not open error log file 'M:\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'. Operating system error = 3(The system cannot find the path specified.)."
    Can anyone provide any assistant?  Many thanks!
    Regards,
    Daniel

    Hi Yaroslav,
    In Application Server, Not started.
    Log(1):
    The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: SAP Service SAP???_?? has been stopped successfully..
    Log(2):
    The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Initialization failed. Service not started. [ntservmain.cpp 1269].
    Log(3):
    The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Cannot open Profile
    sapgrp\sapmnt\PRD\SYS\profile\START_D21_sapapp1. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 902].
    For SQL Server(The one which Cluster cannot move group to):
    Log(1):
    The description for Event ID ( 35712 ) in Source ( SAPPRD_01 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event:  ,  ,  ,  ,  ,  ,  ,  ,  ,  , r, e, c, v, 1, 0, 0, 5, 4,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , N, i, I, R, e, a, d, r, e, c, v,  ,  ,  , n, i, x, x, i, ., c, p, 4, 2, 4, 5, , , , , , , , , , , , , , , , , , , , , , , , , , ,           recv10054                   NiIReadrecv   nixxi.cp4245.
    Log(2):
    The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: SAP Service SAP???_?? has been stopped successfully..
    Log(3):
    The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Initialization failed. Service not started. [ntservmain.cpp 1269].
    Log(4):
    The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Cannot open Profile
    sapgrp\sapmnt\PRD\SYS\profile\START_D20_sapdb2. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 902].
    Regards,
    Daniel

  • ISE application server not running

    Hi Team,
    My ISE appliance application server not running, even reboot still the same, any reason?
    ISE-3315-K9       
    Displaying ISE application status .... 
    ISE Database listener is running, PID: 6270
    ISE Database is running, number of processes: 17
    ISE Application Server process is not running.
    ISE Profiler DB is not running
    ISE M&T Session Database is not running.
    ISE M&T Log Collector is not running.
    ISE M&T Log Processor is not running.
    I saw suspicious from logs, anyone experience this before? I coudn't find this ise ErrorCode: -999 from the Cisco KE database.
    2015-01-19T15:45:47.371651+11:00 ISE1 ADE-SERVICE[2742]: [9862]:[error] application:operation ci_util.c[597] [marcellus]: Problem executing init script (/opt/CSCOcpm/bin/cpmcontrol.sh) err = 1
    2015-01-19T15:45:47.371671+11:00 ISE1 ADE-SERVICE[2742]: [9862]:[error] application:operation cars_install.c[1931] [marcellus]: App (ise) has trouble executing <init> tag
    2015-01-19T15:45:47.377124+11:00 ISE1 ADEOSShell[9862]: ADEAUDIT 3015, type=APP INIT, name=Error during application init, username=marcellus, cause=(null), adminipaddress=10.0.10.7, interface=CLI, detai
    l=Application (ise) has trouble executing <init> tag
    2015-01-19T15:45:47.377333+11:00 ISE1 ADE-SERVICE[2742]: [9862]:[error] application:operation install_cli.c[419] [marcellus]: Error while starting application  - Application: ise ErrorCode: -999

    Hi Neno,
    Thanks for replying, this is it.
    Displaying ISE version ...
    Cisco Identity Services Engine
    Version : 1.2.0.899
    Build Date : Wed 24 Jul 2013 17:37:31 EST
    Install Date : Wed 01 Oct 2014 12:33:32 EST

  • Windows Backup - The backup application coud not start due to an internal error: You must be logged on as an administrator to perform this task. (0x8100000010).

    Windows 7 users in my domain are unable to configure or change backup settings.  Users are able to open Control Panel > Backup and Restore, but when they click
    Change settings, they receive the error: Windows Backup - The backup application coud not start due to an internal error: You must be logged on as an administrator to perform this task. (0x8100000010).
    The same error is received when executing sdclt.exe /configure at the command prompt, regardless of whether the command prompt is launched using "run as administrator".
    I've done significant testing, and have been able to determine that the local administrator account is able to configure backups before the computer is joined to the domain.  Once the computer is joined to the domain, the local administrator account
    and domain users who are in the local administrators group are no longer able to configure backup and restore.  Domain administrators are able to configure backups.
    This is a new issue, which began occuring sometime in the last 2 months.  3 months ago, users were able to configure backups without issue, and those computers with backups configured are still able to run their backups and do restores; however the
    settings can no longer be changed. 
    Clearly something in the domain is doing this, but Group Policy has not been altered, and I can find no setting that would be doing this in any case.  Any help is appreciated. 

    Hi,
    So you mean you have tried different accounts in the local Administrator group and all of them failed?
    If so, please check what group the local Administrator group belongs to? Does it belong to a group with limited privileges, such as the Guests group?
    Tim Quan

  • The J2EE Server not starting.

    Hello,
    The J2EE Server not starting. (Not able to communicate with message server)
    The following is the description I got from SAP.
    " Most likely you did configurations on the instance properties, instead
    of the global properties, which is the one where the the configurations
    should be done. That is why now you did set local properties
    which are now false, for example : ume.ldap.access.server_port=[]
    This is the cause why the LDAP connection data cannot be retrieved.
    This is why the UME service cannot be started.
    This is why the J2ee engine is not comming up. "
    Pls help.

    Hi Karan
    1.Go to \usr\sap\SID\JCXX\j2ee\configtool and start the config tool.
    2.No go to instance -
    >server----->services--->com.sap.security.core.ume.services node.
    3.Look for ume.ldap.access.server_port=[]
    4.See if you have changed the value for the above parameter.If yes change the value to default and restart the engine.It will work
    If at all you want to change any configurations you should do it following the below steps:
    1.Go to \usr\sap\SID\JCXX\j2ee\configtool and start the config tool
    2.Go to Global Server Configurations-->Services--
    >
    Please award points:

  • I am trying to synch my iphone but when i tunes starts it doesnt display the device in the left hand column and a box comes up saying "This iphone cannot be use because the Apple Mobile Device service is not started" I have synched this phone many times

    i keep getting a message when i try to synch my iphone "This iphone cannot be used because the Apple Mobile Device service is not started" I have synched this phone with this computer many times before with no problems. Can anyone please shed any light on how to fix this? thx

    See Here
    http://support.apple.com/kb/TS1567

  • Can anyone help, i have an iphone 4s from the uk and am now in australia... i have given the imei number to my old carrier in the uk to have the phone unlocked 4 weeks later it still is not unlock. i keep getting the sim car error in itunes help me please

    can anyone help me please?
    i have an iphone 4s from the uk and am now in australia...
    i have given the imei number to my old carrier in the uk to have the phone unlock 4 weeks later its still not unlocked.
    i keep getting the sim card error in itunes help me please

    Jason_247 wrote:
    evan tried jailbreak as a last option because i was getting fed up waiting for the imei unlock
    Well, doing that "could" be your problem, as it will error out & prevent the official unlock from being processed.
    At any rate, good luck.

  • TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

    Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
    Thankyou in advance  for your help.
    Terrence

    Hey terremo,
    Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Thanks,
    Matt M.

  • Managed server not starting on Weblogic 10.3.6 IBM AIX 7.1

    Hi. When i try starting managed server on weblogic 10.3.6 i get this error:
       <02-Mar-2015 17:13:25 o'clock EET> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.SecurityException: Unable to locate a login configuration
    java.lang.SecurityException: Unable to locate a login configuration
                   at com.sun.security.auth.login.ConfigFile.getAppConfigurationEntry(ConfigFile.java:221)
                   at com.bea.common.security.jdkutils.JAASConfiguration.getAppConfigurationEntry(JAASConfiguration.java:87)
                   at javax.security.auth.login.LoginContext.init(LoginContext.java:272)
                   at javax.security.auth.login.LoginContext.<init>(LoginContext.java:438)
                   at com.bea.common.security.internal.service.JAASLoginServiceImpl$1.run(JAASLoginServiceImpl.java:101)
                   Truncated. see log file for complete stacktrace

    dunnsoftinc wrote:
    During the initial pass, I decided to leave this password null in both places, which is documented within the peopletools 8.53.00 installation guide. Maybe, it's time to further test. Thank you Nicolas.To be honest I've never tried to leave it blank in previous releases, thought that was mandatory (it was not prompted in psadmin menu as it is with PT8.53).
    I don't have a PTools 8.53 instance in hands right now, but after a quick test over here on PT8.51, I have the same issue as yours.
    Let me also remind you that there are two separate scenarios that may be received via the sign-on page:
    1.) "The application server is down" status message without the "bea.jolt.ServiceException: TPESVCERR - server error while handling request" error.
    2.) "The application server is down" status message including the "bea.jolt.ServiceException: TPESVCERR - server error while handling request" error.As I said earlier, you should get more clue in the webserver logfiles.
    Nicolas.

Maybe you are looking for

  • HP Pavilion hard drive response time is very slow but tests pass (evenutally)

    I have owned a HP Pavilion M1199a originally running Windows XP, but has been running Windows Vista 32-bit for the last 3 years or more. The PC started to lock up for 30 seconds or more (2 weeks ago), with the disk light constantly on then go again f

  • BOE XI 3.1: Problem with Simple Report Filter.

    Hi everyone!. One requirement that i have in one customer is about the use of simple reports filters, the customer doesn't want to use the input controls. If i add one simple report filter and save the report, the final user can add other simple repo

  • How to Remove Master CS6 on Mac?

    Hi, as tite stated I can't found a way to remove automatically the entire Master CS6. I can't found any "uninstaller" or "remove" app. Any help will be appreciated. Thanks.

  • Variable restriction combination

    Hi, i have selection done by variable (manual inputs) but i need to set up a dependance between variables input. i have the main variable (A) which is an attribut of variable 2 (B) and B is an attribute of variable (C) I bps i created a characteristi

  • Photoshop 11 for mac

    When I bought photoshop11 I used it on my pc.  Now I have a mac. I still have the mac dvd from the purchase.  If I buy the machine that will allow me to use dvds with my mac, will that dvd still be good to use?  Thanks!