Iplanet application server not starting
I am trying to deploy an application on weblogic server..........when i stop my weblogic server and look into another application which is on iplanet server the application server doesnot start .
and gives me the following error
" [19/Apr/2005 14:30:36:2] error: DSYNC-004: ''GetRoleOfCurrentEngine'': No Primary; Synchronizer will operate in Standalone mode
[19/Apr/2005 14:30:36:2] info: LCYCMGR-002: registered component of type Dsync2 "
Are there some compliance issues when u have 2 different application servers on 1 pc.
any other suggestions would be appreciated
-raj
Hi,
I was able to resolve this issue earlier with the below reference.
please check the doc ID 657411.1 on oracle support .(E-AS: exec PSSRCHSRV: CMDTUX_CAT:1685: ERROR: Application initialization failure [ID 657411.1])
It says the error might be because of the Add to Path.
check if this helps you in resolving the issue.
Shilpa
Similar Messages
-
Application server not starting on win 2000
when i try to start the application server, the prompt dos prints the following message:
Could not start the instance: domain1:admin-server
server failed to start: abnormal subprocess termination
Could not start the instance: domain1:server1
server failed to start: abnormal subprocess termination
Could not start one or more instances in the domain : domain1
Could not start one or more domains
Premere un tasto per continuare . . .This is roughly what the log file says... is my EE environment not properly set up???
[24/Feb/2003:10:16:01] INFO ( 2628): CORE1116: Sun ONE Application Server 7.0
[24/Feb/2003:10:16:04] INFO ( 2628): CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.4.0_02] from [Sun Microsystems Inc.]
[24/Feb/2003:10:16:44] INFO ( 2628): JMS5035: Timed out after 30000 milliseconds while trying to verify if the JMS service startup succeeded.
[24/Feb/2003:10:16:44] INFO ( 2628): JMS5036: More details may be available in the log file for the JMS service broker instance domain1_server1. Please refer to the JMS provider documentation for the exact location of this log file.
[24/Feb/2003:10:16:44] SEVERE ( 2628): JMS5024: JMS service startup failed.
[24/Feb/2003:10:16:44] SEVERE ( 2628): CORE5071: An error occured during initialization
com.sun.appserv.server.ServerLifecycleException: [C4003]: Error occurred on connection creation. - caught java.net.ConnectException
at com.iplanet.ias.jms.JmsProviderLifecycle.onInitialization(JmsProviderLifecycle.java:247)
at com.iplanet.ias.server.ApplicationServer.onInitialization(ApplicationServer.java:206)
at com.iplanet.ias.server.J2EERunner.confPreInit(J2EERunner.java:114)
Caused by: com.sun.appserv.server.ServerLifecycleException: [C4003]: Error occurred on connection creation. - caught java.net.ConnectException
at com.iplanet.ias.jms.JmsProviderLifecycle.onInitialization(JmsProviderLifecycle.java:231)
... 2 more
Caused by: javax.jms.JMSException: [C4003]: Error occurred on connection creation. - caught java.net.ConnectException
at com.sun.messaging.jmq.jmsclient.ExceptionHandler.getJMSException(ExceptionHandler.java:183)
at com.sun.messaging.jmq.jmsclient.ExceptionHandler.handleException(ExceptionHandler.java:136)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.readBrokerPorts(PortMapperClient.java:145)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.init(PortMapperClient.java:86)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.<init>(PortMapperClient.java:47)
at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPConnectionHandler.<init>(TCPConnectionHandler.java:46)
at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPStreamHandler.openConnection(TCPStreamHandler.java:101)
at com.sun.messaging.jmq.jmsclient.ProtocolHandler.init(ProtocolHandler.java:501)
at com.sun.messaging.jmq.jmsclient.ProtocolHandler.<init>(ProtocolHandler.java:930)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.openConnection(ConnectionImpl.java:1482)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.init(ConnectionImpl.java:403)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.<init>(ConnectionImpl.java:234)
at com.sun.messaging.jmq.jmsclient.UnifiedConnectionImpl.<init>(UnifiedConnectionImpl.java:33)
at com.sun.messaging.jmq.jmsclient.QueueConnectionImpl.<init>(QueueConnectionImpl.java:32)
at com.sun.messaging.ConnectionFactory.createQueueConnection(ConnectionFactory.java:72)
at com.sun.messaging.jmq.admin.jmsspi.JMSAdminImpl.pingProvider(JMSAdminImpl.java:733)
at com.iplanet.ias.jms.JmsProviderLifecycle.waitForJmsProvider(JmsProviderLifecycle.java:284)
at com.iplanet.ias.jms.JmsProviderLifecycle.onInitialization(JmsProviderLifecycle.java:224)
... 2 more
[24/Feb/2003:10:16:44] SEVERE ( 2628): CORE3186: Failed to set configuration -
Application Server not starting
Hi All,
I am facing issue while starting application server. Below is the error message that I am getting-
Error while booting the domain-
Attempting to boot ...
Booting all admin and server processes in /projects/psoft/hr815B/appserv/gpstst03/PSTUXCFG
INFO: TUXEDO(r) System Release 6.5
INFO: Serial #: 101998665, Expiration NONE, Maxusers 1000000
INFO: Licensed to: PeopleSoft
Booting admin processes ...
exec BBL -A :
process id=2726 ... Started.
Booting server processes ...
exec PSAPPSRV -p 1,600:1,1 -s@../psappsrv.lst -s@../psqcksrv.lst -sICQuery -sSqlQuery:SqlRequest -- -C psappsrv.cfg -D gpstst03 -S PSAPPSRV :
CMDTUX_CAT:1685: ERROR: Application initialization failure
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
exec tmshutdown -y
Shutting down all admin and server processes in /projects/psoft/hr815B/appserv/gpstst03/PSTUXCFG
Shutting down server processes ...
tmboot: CMDTUX_CAT:828: NLS:6: Message not found, catalog CMDTUX_CAT, set 1, num 828
==============ERROR!================
Boot attempt encountered errors!. Check the TUXEDO log for details.
==============ERROR!================
Do you wish to see the error messages in the APPSVR.LOG file? (y/n) [n] :
Shutting down admin processes ...
Server Id = 0 Group Id = usilap36 Machine = usilap36: shutdown succeeded
1 process stopped.
APPSRV.LOG-
PSADMIN.28394 [09/01/10 09:43:41](0) Begin boot attempt on domain gpstst03
PSAPPSRV.2959 [09/01/10 09:43:48](0) PeopleTools Release 8.15 (HP/UX) starting
PSAPPSRV.2959 [09/01/10 09:43:48](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database GPSTST03 with user PS. – from Application Designer and sqlplus, we are able to login with PS ID(PS/l9admin)
PSADMIN.28394 [09/01/10 09:43:48](0) End boot attempt on domain gpstst03
TUXLOG-
094342.usilap36!PSADMIN.28394: Begin boot attempt on domain gpstst03
094346.usilap36!BBL.2726: 09012010: TUXEDO Version 6.5 HP-UX B.11.00 U 9000/898 1623623321 unlimited-user license.
094346.usilap36!BBL.2726: LIBTUX_CAT:262: INFO: Standard main starting
094348.usilap36!PSAPPSRV.2959: 09012010: TUXEDO Version 6.5 HP-UX B.11.00 U 9000/898 1623623321 unlimited-user license.
094348.usilap36!PSAPPSRV.2959: LIBTUX_CAT:262: INFO: Standard main starting
094348.usilap36!PSAPPSRV.2959: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
094348.usilap36!tmboot.2501: 09012010: TUXEDO Version 6.5 HP-UX B.11.00 U 9000/898 1623623321 unlimited-user license.
094348.usilap36!tmboot.2501: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
094348.usilap36!tmboot.2501: NLS:6: Message not found, catalog CMDTUX_CAT, set 1, num 724
094348.usilap36!PSADMIN.28394: End boot attempt on domain gpstst03
With PS ID, we have created Process Scheduler for same domain and it's running fine.
Please help us to resolve this issue.
Regards,
PradeepHi,
I was able to resolve this issue earlier with the below reference.
please check the doc ID 657411.1 on oracle support .(E-AS: exec PSSRCHSRV: CMDTUX_CAT:1685: ERROR: Application initialization failure [ID 657411.1])
It says the error might be because of the Add to Path.
check if this helps you in resolving the issue.
Shilpa -
APPLICATION SERVER not starting SSO
Hi ,
I am not able to start our application server, the instance starts and then it shuts down.
Following is the Log of dev_w0...
File "/usr/sap/HSP/SYS/exe/run/libsnckrb5.so" dynamically loaded as SNC-Adapter.
N The Adapter identifies as:
N External SNC-Adapter (Rev 1.0) to Kerberos 5/GSS-API v2
N *** ERROR => SncPSetNewName()==SNCERR_PLAUSI [sncxx*.c 2560]
N GSS-API(maj): An invalid name was supplied
N Cleanup: trying to release GSSAPI internal name
N gss_name_t="ptr: 112659610"
N SncInit(): found snc/identity/as=p:host/[email protected]
N *** ERROR => SncPAcquireCred()==SNCERR_GSSAPI [sncxxall.c 1510]
N GSS-API(maj): Unspecified GSS failure. Minor code may provide more information
N GSS-API(min): No principal in keytab matches desired name
N Could't acquire ACCEPTING credentials for
N
N name="p:host/[email protected]"
M *** ERROR => ErrISetSys: error info too large [err.c 945]
Please look into it.
Thanks
NitishHi,
I was able to resolve this issue earlier with the below reference.
please check the doc ID 657411.1 on oracle support .(E-AS: exec PSSRCHSRV: CMDTUX_CAT:1685: ERROR: Application initialization failure [ID 657411.1])
It says the error might be because of the Add to Path.
check if this helps you in resolving the issue.
Shilpa -
Application server not starting - I have given the dispatcher log below
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid P1D
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 2800
Wed Apr 07 16:09:05 2010
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2800) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Apr 07 16:09:10 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >blrkec115278d_P1D_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06640040, size: 4653368)
DpShMCreate: allocated sys_adm at 06640040
DpShMCreate: allocated wp_adm at 06641E40
DpShMCreate: allocated tm_adm_list at 066465C0
DpShMCreate: allocated tm_adm at 066465F0
DpShMCreate: allocated wp_ca_adm at 06A15890
DpShMCreate: allocated appc_ca_adm at 06A1B650
DpShMCreate: allocated comm_adm at 06A1D590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06A9E450
DpShMCreate: allocated gw_adm at 06A9E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06A9E4C0
DpShMCreate: allocated wall_adm at 06A9E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1216
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:11 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:12 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:13 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:14 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:15 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:16 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:17 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:272 HANDLE:1560)
[DpProcDied] Process died (PID:1216 HANDLE:1540)
DpStartStopMsg: send stop message (myname is >blrkec115278d_P1D_00 <)
NiIMyHostName: hostname = 'blrkec115278d'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Wed Apr 07 16:10:18 2010
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1484 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1484 (pos=3)
SiSelNRemove: removed sock 1484
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1484
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2800) [dpxxdisp.c 10259]
Good Bye .....trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Wed Apr 07 16:09:10 2010
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\P1D\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\P1D\DVEBMGS00\exe\dboraslib.dll' loaded B Version of 'D:\usr\sap\P1D\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73) B New connection 0 created
M sysno 00
M sid P1D
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3784
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC) M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3784) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active M DpShMCreate: sizeof(wp_adm) 18304 (1408) M DpShMCreate: sizeof(tm_adm) 3994272 (19872) M DpShMCreate: sizeof(wp_ca_adm) 24000 (80) M DpShMCreate: sizeof(appc_ca_adm) 8000 (80) M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048) M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72) M DpShMCreate: sizeof(vmc_adm) 0 (1440) M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184) M DpShMCreate: sizeof(gw_adm) 48 M DpShMCreate: SHM_DP_ADM_KEY (addr: 06640040, size: 4653368) M DpShMCreate: allocated sys_adm at 06640040 M DpShMCreate: allocated wp_adm at 06641E40 M DpShMCreate: allocated tm_adm_list at 066465C0 M DpShMCreate: allocated tm_adm at 066465F0 M DpShMCreate: allocated wp_ca_adm at 06A15890 M DpShMCreate: allocated appc_ca_adm at 06A1B650 M DpShMCreate: allocated comm_adm at 06A1D590 M DpShMCreate: system runs without file table M DpShMCreate: allocated vmc_adm_list at 06A9E450 M DpShMCreate: allocated gw_adm at 06A9E490 M DpShMCreate: system runs without vmc_adm M DpShMCreate: allocated ca_info at 06A9E4C0 M DpShMCreate: allocated wall_adm at 06A9E4C8 X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default X ES initialized.
M
M Wed Apr 07 16:09:11 2010
M ThInit: running on host blrkec115278d M M Wed Apr 07 16:09:12 2010 M calling db_connect ...
C Prepending D:\usr\sap\P1D\DVEBMGS00\exe to Path.
C
C Wed Apr 07 16:09:13 2010
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8 C Logon as OPS$-user to get SAPSR3's password C Connecting as /@P1D on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06BF10F8 06BF6694 06BF5F1C
C Attaching to DB Server P1D (con_hdl=0,svchp=06BF5E68,svrhp=06C07734)
C
C Wed Apr 07 16:09:14 2010
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@P1D on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06BF10F8 06BF6694 06BF5F1C
C Detaching from DB Server (con_hdl=0,svchp=06BF5E68,srvhp=06C07734)
C Attaching to DB Server P1D (con_hdl=0,svchp=06BF5E68,svrhp=06C07734)
C
C Wed Apr 07 16:09:16 2010
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c 10933]
B ***LOG BY2=> sql error 12541 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 12541 performing CON [dblink#3 @ 431] [dblink 0431 ] B ***LOG BY0=> ORA-12541: TNS:no listener [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server blrkec115278d_P1D_00 on host blrkec115278d (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Apr 07 16:09:16 2010
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics M Entering TH_CALLHOOKS M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260] M Entering ThSetStatError M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0) M Entering ThReadDetachMode M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3784) [dpnttool.c 327] -
Application Server cannot start after restart
Dear all,
I have a database cluster with SAP CI running on 2 servers(on SAN), plus 4 applications.
Today we have restarted all the servers, and found that only 1 server with database server and application server (w/CI) can start. All other applications servers cannot start, and in SAP Management Console, it does not show the SAP Instance.
Another problem is that the database cluster cannot move to another server, with error:
"initerrlog: Could not open error log file 'M:\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'. Operating system error = 3(The system cannot find the path specified.)."
Can anyone provide any assistant? Many thanks!
Regards,
DanielHi Yaroslav,
In Application Server, Not started.
Log(1):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: SAP Service SAP???_?? has been stopped successfully..
Log(2):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Initialization failed. Service not started. [ntservmain.cpp 1269].
Log(3):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Cannot open Profile
sapgrp\sapmnt\PRD\SYS\profile\START_D21_sapapp1. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 902].
For SQL Server(The one which Cluster cannot move group to):
Log(1):
The description for Event ID ( 35712 ) in Source ( SAPPRD_01 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: , , , , , , , , , , r, e, c, v, 1, 0, 0, 5, 4, , , , , , , , , , , , , , , , , , , , N, i, I, R, e, a, d, r, e, c, v, , , , n, i, x, x, i, ., c, p, 4, 2, 4, 5, , , , , , , , , , , , , , , , , , , , , , , , , , , recv10054 NiIReadrecv nixxi.cp4245.
Log(2):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: SAP Service SAP???_?? has been stopped successfully..
Log(3):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Initialization failed. Service not started. [ntservmain.cpp 1269].
Log(4):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Cannot open Profile
sapgrp\sapmnt\PRD\SYS\profile\START_D20_sapdb2. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 902].
Regards,
Daniel -
Deploying war file on iplanet application server 6.5
Hi ,
We are trying to deploy WebObjects application on Iplanet Application server server 6.5.
Steps we tried for deployment :
1) War file generated by WebObjects.
2) Started IPlanet Application server.
3) Opened the War file in the deployment tool.
4) Verified that the WAR file to be deployed using the verify option in the deployment tool(Verified successfully)
5) We tried to save the archive, then it throws an error saying "
"Invalid entry compressed size (expected 52 bytes but got 51 bytes)".
We ignored this message and proceeded further by clicking on OK.
6) Deployed the WAR file using the deploy option
7) In the deploy message box, it diplays that the application was deployed successfully.
Then we tried to access the application by trying the following url : " http://localhost/NASApp/<CONTEXT NAME>/WebObjects/<APPLICATION NAME>"
(eg : http://localhost/NASApp/SampleApplication/WebObjects/SampleApplication.woa>)
We are getting the error saying that " GXError". We are not sure whether the the above mentioned url is the correct way to access the application !
What we think the problem in deployment is
i) because of error while saving the WAR file (Invalid entry compressed size (expected 52 bytes but got 51 bytes)
ii) URL not appropriate
Other observations :
We tried to deploy to deploy sample application on Iplanet Application server. All these sample applications are deployed properly without the above mentioned error message. All these application are accessed by typing following url : " http:localhost/NASApp/<CONTEXT NAME>/<APPLICATION NAME>". IN all the sample application, url contains "NASApp" . We are not sure what this stand for and maps to. What we assumed is that it maps to the the iplanet app document root i.e "installedroot/ias6/ias/App"
The exception throw while saving the WAR file is " com.iplanet.ias.tools.buzz.util.ArchiveHandlerException"
Has any body who has tried this can help us?
Thanks,
Raju and VenkateshHi,
First of all the application you are trying is from a WebObjects application server. I don't know how they package the modules and what is the format/file structure. I just went to their site, though they say that the WebObjects applications can be deploy on any J2EE Application server but still how they package and how they write the xml descriptors is not known.
Looking at your exception it seem that first it is something to do the war/jar archive file compression thing (as the deployment tool is not able to read the complete file) then comes the deployment descriptors.
I tried to get a few sample application from their site but I couldn't fine any, it will be great help if you can provide a WebObjects sample app to me (mail it to [email protected]).
Regarding the NASApp string in URL, it has nothing to do with document root of iAS and also installedroot/ias6/ias/APPS dir is not the document root of iPlanet app server, this is the place where it save/explodes all the archives (ear).
See iPlanet App server don't have any HTTP daemon to listen to the HTTP requests, so it needs a web server with a plugin (web connector) to forward the HTTP requests meant for iAS, and this NASApp string in the URL is the key to that.
All the URLs are first send to the iAS plugin (as configured in web server's obj.conf file) and plugin look for this NASApp string (configurable), if it is there in the URL then it converts the HTTP request and send it to iAS over a proprietary protocol (KCP), otherwise it gives the request as it is to web server to process it.
The NASApp string is a iAS registry parameter which you can change any time. And generally the context root part of the URL is the war file name (by default). So the typical URL for any web application (MyWeb.war) will be:
http://<host>:<port>/NASApp/MyWeb/<Servlet_name>.
I don't know why that extension "*.woa" is there. So if you send me a sample war file, I will be able to try it out.
Please feel free to ask further questions.
Sanjeev,
Developer Support, Sun ONE Application Server-India. -
Iplanet application server 6.5 on windows xp
I'm trying to install iplanet application server 6.5 on windows xp. but for some reason it just hangs at the end of the install. Leaving my no choice but to quit the instalation. Has anyone sucessfully install 6.5 on xp? and could anyone help? would be appreciated.
Thanks in advance...I've just spent a day or two mucking around with getting the iPlanet 6.5 Application Server install running with IIS on XP, and have got as far as having the "fortune" application running. I also encountered the "hanging installation" problem on my 5th or 6th reinstallation. Here is my checklist of things to do:
1. As has been pointed out earlier, you must have a static IP address assigned to the machine you are installing on.
2. You should set up IIS before installing iPlanet - during the install you'll be prompted to set up the Web Connector for IIS.
3. If you find that the install hangs at the end (seems to be in the middle of building the Start Menu shortcuts), then deinstall from the Control Panel | Add Remove Software and run the install in Windows 2000 compatibility mode - this article lays out how to start applications in compatibility mode:
http://www.microsoft.com/windowsxp/using/games/expert/durham_og.mspx
4. You need to switch IIS to run in-process as per these instructions:
http://docs.sun.com/source/816-5788-11/app1.html#14411
see the section "Registering the Plug-in on IIS 5.0 running on Windows 2000".
Note that in XP the tab is called "Directory" rather than "Virtual Directory" and ensure that you grant Execute Permission to both Scripts and Executables (default is just Scripts I think)
5. You need to grant security permissions to the registry key
\\local machine\\software\\iplanet\\Appserver\\6.0\\CCS0\\HTTPAPI
as per the post by Vaidyanathan Iyer :
http://swforum.sun.com/jive/thread.jspa?threadID=20660&tstart=90
Regards -
Can't Load 3rd Party JDBC in iPlanet Application Server
I am trying to use a 3rd Party Type 4 Oracle JDBC driver to connect to a database in iPlanet Application Server 6.0 SP3. I used the jdbcsetup.exe tool to register the driver and used the iAS Administrative Tool to Register the Datasource.
External JDBC Driver Parameters:
Driver Type: OracleConnectionPoolDataSource
Driver Classname: oracle.jdbc.pool.OracleConnectionPoolDataSource
Driver Classpath: c:\src\jdbc\lib\classes111.zip
DataSource Registration Parameters:
JNDI Name: OracleConnectionPoolDataSource
DriverType: OracleConnectionPoolDataSource
DatabaseURL: jdbc:oracle:thin:@decipher:1521:csi
Code to Access datasource (Note: dsName=OracleConnectionPoolDataSource):
try {
// Define JNDI InitialContext object.
InitialContext ctx = new InitialContext();
ds = (DataSource)ctx.lookup("jdbc/" + dsName);
dbConn = ds.getConnection();
//requires all sql Statements to be manually commit(ed)
dbConn.setAutoCommit(false);
if(dbConn!=null)
System.out.println("Getting a connection from dds.");
catch (Exception e){
e.printStackTrace();
The Error that I am getting:
[22/Aug/2002 15:43:51:9] info: RLOPMGR-005: OracleConnectionPoolDataSource: CALLBACK FAILED: CreateObject
java.sql.SQLException: A. Couldn't load or create 3rd party class: oracle.jdbc.pool.OracleConnectionPoolDataSource
at com.netscape.server.jdbc.Driver.connect(Unknown Source)
at com.netscape.server.jdbc.ConnectionPool.createNewConnection(Unknown Source)
at com.netscape.server.jdbc.ProxyEvaluation.createObject(Unknown Source)
at com.kivasoft.rlop.ObjectPool.reserveObjectnative(Native Method)
at com.kivasoft.rlop.ObjectPool.reserveObject(Unknown Source)
at com.netscape.server.jdbc.ConnectionPool.getFromPool(Unknown Source)
at com.netscape.server.jdbc.ConnectionPool.getConnection(Unknown Source)
at com.netscape.server.jdbc.DataSourceImpl.getConnection(Unknown Source)
at com.netscape.server.jdbc.DataSourceImpl.getConnection(Unknown Source)
I would greatly appreciate any help on why I am getting this error. I am desparate!I'm sorry but I'm not an expert......
As you know Classes12.zip contains two dir "javax" and "oracle".
So my path for driver is "/servers/jdbc/classes12.zip (or wath is contains).
In classpath variable in iasenv.ksh I put /servers/jdbc but it doesn't work.
I tried with /servers/jdbc/oracle/driver.....the same
Can you help me again
Thank you very much!
Massimiliano -
System Landscape Directory server not started
Hi,
We are running Solution Manager 4.0 SP13.
When I log ito the NWA get the message : System Landscape Directory server not started
We are trying to configure CEN but only the Local System can be administered.
If I goto the Central SLD and login - Administration - Server Started.
If I look at the ABAP - Transaction SLDAPICUST - save configuration - all ok
I goto the Jco Connectors and ensure all Jco Connections are configured: SAPSLDAPI_SID
ABAP RFCs; All configured
ABAP - Transaction - sldcheck .. it returns with success.
I login to the ABAP stack - smgw - logged in clients and all Jco Connections are available
I go into the J2ee Admin - navigate to the SLD Data supplier - all tests return success.
The SLD CIM is version 1.5.20
The application com.sap.engine.class.download is started ( Note 1017526 )
However when I login to with the J2ee_admin tool the following is missing from the CIM Client:
sap.com/tclmwebadminmainframewd/webdynpro/public/lib/app.jar
sap.com/tclmwebadminsldwd/webdynpro/public/lib/app.jar
Please help.Hi Anand,
I verified the SLD Post Processing doc in case I missed something. The doc I used:
https://websmp106.sap-ag.de/~sapidb/011000358700003772372006E
I went through every point in the doc and verified that it was completed .
If I open Monitoring Setup Guide for SAP NetWeaver 7.0 SP Stack 12 ( Can't find 13 ) I go to page 68 :
6.5.2. Configuring the Connection Between CEN and the SLD ... I have followed all the steps without any error.:
I followed it Step-by-Step.... however the following CIM Client Genearations do not exist:
sap.com/tclmwebadminmainframewd/webdynpro/public/lib/app.jar
sap.com/tclmwebadminsldwd/webdynpro/public/lib/app.jar
What is available and Activated :
sap.com/tclmwebadminmainframewd/webdynpro/public/lib/sap.comtclmwebadminmainframe~wd.jar
sap.com/tclmwebadminsldwd/webdynpro/public/lib/sap.comtclmwebadminsld~wd.jar
I alos Decided for the purpose of Troubleshooting to Activate All:
sap.com/tclmwebadmin~mainframe.......
sap.com/tclmwebadmin~sld..........
When I go into NWA .. its still says SLD Not started.
If I go inot the J2ee Admin Tool - SLD Data Supplier - Trigger Data Transfer OK
I goto the SLD - Administration . SLD Started
I Can see all the Techinical systems - ABAP and Java.
All business Systems are there
SLDCHECK works fine .. no errors !
But I can't change the status of the NWA System Landscape Selectipon From Local to Central.
Warning / Error :
System Landscape Directory server not started
and
Only local system can be administered
I maybe missing something but I can't see what it is....
Further Help required ! -
ISE application server not running
Hi Team,
My ISE appliance application server not running, even reboot still the same, any reason?
ISE-3315-K9
Displaying ISE application status ....
ISE Database listener is running, PID: 6270
ISE Database is running, number of processes: 17
ISE Application Server process is not running.
ISE Profiler DB is not running
ISE M&T Session Database is not running.
ISE M&T Log Collector is not running.
ISE M&T Log Processor is not running.
I saw suspicious from logs, anyone experience this before? I coudn't find this ise ErrorCode: -999 from the Cisco KE database.
2015-01-19T15:45:47.371651+11:00 ISE1 ADE-SERVICE[2742]: [9862]:[error] application:operation ci_util.c[597] [marcellus]: Problem executing init script (/opt/CSCOcpm/bin/cpmcontrol.sh) err = 1
2015-01-19T15:45:47.371671+11:00 ISE1 ADE-SERVICE[2742]: [9862]:[error] application:operation cars_install.c[1931] [marcellus]: App (ise) has trouble executing <init> tag
2015-01-19T15:45:47.377124+11:00 ISE1 ADEOSShell[9862]: ADEAUDIT 3015, type=APP INIT, name=Error during application init, username=marcellus, cause=(null), adminipaddress=10.0.10.7, interface=CLI, detai
l=Application (ise) has trouble executing <init> tag
2015-01-19T15:45:47.377333+11:00 ISE1 ADE-SERVICE[2742]: [9862]:[error] application:operation install_cli.c[419] [marcellus]: Error while starting application - Application: ise ErrorCode: -999Hi Neno,
Thanks for replying, this is it.
Displaying ISE version ...
Cisco Identity Services Engine
Version : 1.2.0.899
Build Date : Wed 24 Jul 2013 17:37:31 EST
Install Date : Wed 01 Oct 2014 12:33:32 EST -
Sun Java Application Server 9 Start Up Woes
Hi,
I was asked to install the netbeans 5.5 IDE (which comes with Java Application Server 9 bundled with it) and basically learn how to develop using JMS. After installing everything and following the JavaEE tutorial, I began to set everything up. I get hung during the Sun Java Application Server 9 start up.
It attempts to bind to my host name. After a week of research as to the cause, i discovered that the problem is that the server gets my host name from DNS and uses that as its bind location. The software running at my place of business prevents me from making connections such as these with anything but localhost connections.
I descovered this when I read on here from another topic that i should try and start the server after disabling my network card. This method works in that the server starts up, no longer using my host name as the host but rather using localhost. Now this in no way fixes my problem.
I was wondering if there were any workarounds that would force the application server or netbeans or whatever to use localhost isntead of doing a host name lookup?
The error I got was a NoRouteToHostException, and when I disabled my network card that error went away, the error changed to UnknownHostException, but the server started up and I was then able to go to the admin page and deploy applications (but not run)
P.S. I was going to post the output of the server start ups, but the size is crazy long, if you have a way for me to remove the stack trace I would be glad to give it a try.
-SonOfThor
Message was edited by:
SonOfThor
Linux Fedora Core, by the way.I switched to ActiveMQ and it works perfectly.
The issue had to do with Netbeans, no matter how many config files i changed, always used my computername.host.com:8686 instead of localhost:8686.
ActiveMQ starts and runs beautifully because it binds to localhost:8686.
I dont know what the problem was, Ive read lots of solutions saying its firewall or a firewall like process. I'm running bare bones Linux Fedora Core with no extra programs. I insured my firewall was turned off before even posting this. I spoke with my IT guys and they said that the firewall thats set up here at work does not block port binds.
My conclusion: IDEs are more of a pain then they want you to believe, im going back to terminal commands. -
URL Rewriting Session ID Length in iPlanet Application Server
Hi there,
Does anyone know what the maximum length of the session ID value is when
using URL rewriting/encoding for session tracking (i.e.: ";jessionid=1234"
appended to the end of the URL) with iPlanet Application Server 6.0's
servlet container (or any previous versions)?
Does the length vary or is it fixed? And does WebSphere encode server or
failover information into the ID? WebLogic for instance, encodes the
primary and secondary failover servers into the ID when running in a
cluster)?
And finally, is there any way to restrict or specify the maximum length of
the session ID?
I ask this due to a limitation with some WAP clients & gateways which
prevents the URL from exceeding 128 characters.
Any info on this issue from iPlanet staff or anyone else is much
appreciated.
<background-info>
Please see the following links if you'd like some additional background:
http://e-docs.bea.com/wls/docs60/////wap/wapdev.html#1024984
under the heading "Session Tracking" at the bottom
http://groups.google.com/groups?hl=en&safe=off&th=eb7f38aa5086972e,13&seekm=
8gaki8%247d5%241%40newsgroups.bea.com#p
</background-info>
Regards,
Sasha HaghaniSasha Haghani wrote:
Hi there,
Does anyone know what the maximum length of the session ID value is when
using URL rewriting/encoding for session tracking (i.e.: ";jessionid=1234"
appended to the end of the URL) with iPlanet Application Server 6.0's
servlet container (or any previous versions)?
I'm fairly certain that it is fixed. 18 for the attibute, 16 for the value, plus
1 for the equals. (Plus 1 for the ? if it didn't already exist.)
So 35 or 36 depending on how you count it. Someone needs to verify this and
check my counting though.
>
Does the length vary or is it fixed? And does WebSphere encode server or
failover information into the ID? WebLogic for instance, encodes the
primary and secondary failover servers into the ID when running in a
cluster)?I don't know what WebSphere does. iAS does not encode failover information in
the ID. Because of the way session is propogated, no server information needs to
be embedded in the id.
>
And finally, is there any way to restrict or specify the maximum length of
the session ID?No. -
Forms builder & iPlanet Application Server
Is it posible to use files generated with Forms Builder (*.fmx) under the iPlanet Application Server (SUN)?.
Thanks,
Cristina.Hi Ronald,
I have to do an application based in web forms to manage a data base stored in Oracle 9i.
First I thought to do it using the Forms Builder.
The company require standard J2EE and use only the iPlanet Application Server, although use Database Oracle 9i don't use the app Oracle.
Is there not any possibility to use the Forms Builder?
Since I can't use the forms generated with Forms Builder into the Sun App, I think a solucion is to do the forms with JSP.
What do you think about??.
Regards
Thanks
Cristina. -
IPlanet Application Server 6.0, SP3 and Struts 1.0
To all,
I've created a How To document and modified application zip file for running
the struts-example application on iPlanet Application Server 6.0, SP3. The
good news is that this "ported" struts-example also works on Tomcat 3.2 and
WebLogic 6.0 SP1!
Please read if you're interested at
http://www.icsynergy.com/downloads/index.html#struts-example.
Please note that we've created a "patch" for SP3 to fix a "bug" in iPlanet.
You can download this at
http://www.icsynergy.com/downloads/index.html#patch.
Have a good day,
MattHi,
setup.exe has 3 types of installation modes, namely, express, typical and custom. But the ezsetup doesn't asks these questions. The difference between them are..
Setup.exe - Express - Asks fewer questions like, iAS username password, directory server username, password, product key etc
Setup.exe - Typical - Asks for same questions as of Express setup and few more additional questions and allows you to install iAS and use a directory server which is already installed.
Setup.exe - Custom - The most complicated and the highly interactive installation where it requiress 32-33 inputs from the user and fully customisable.
EzSetup.Exe - Doesn't have any sub option, doesn't allow you to use the existing directory server or web server, all it asks is 2 questions..., which directory to install and the product key.
Hope this helps.
Regards
Raj
Maybe you are looking for
-
How to read and update the value of property file
Hi, I am not able read the values from property file. Please tell me how to read and update the values from property file using Properties class This is my property file : - Config.properties its located in D:\newfolder Values SMTP = localhost Now i
-
My new MacBook keeps freezing at the login. What possibly could be the problem?
I have taken my computer to the store 3 times and the last time left it there for 4 days. Each time it miraculously works and there is no identified problem. I have not put any software on in for two months to see if it was the problem. It randomly
-
Hi I have a pavilian dv6 which the screen goes black and shuts off .the comp gets very hot
cooling fan not cooling laptop
-
Adobe Captivate Help | Adobe Captivate App Packager (Cp 7)
This question was posted in response to the following article: http://helpx.adobe.com/captivate/using/captivate-app-packager.html
-
I have successfully installed iTunes (newest version) and Bonjour Service. When I go to Preferences/Sharing it says "Bonjour service has been disabled. Bonjour is required to share muisc with other users. Please re-enable the service to use this feat