Application Server cannot start after restart

Dear all,
I have a database cluster with SAP CI running on 2 servers(on SAN), plus 4 applications.
Today we have restarted all the servers, and found that only 1 server with database server and application server (w/CI) can start. All other applications servers cannot start, and in SAP Management Console, it does not show the SAP Instance.
Another problem is that the database cluster cannot move to another server, with error:
"initerrlog: Could not open error log file 'M:\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'. Operating system error = 3(The system cannot find the path specified.)."
Can anyone provide any assistant? Many thanks!
Regards,
Daniel

Hi Yaroslav,
In Application Server, Not started.
Log(1):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: SAP Service SAP???_?? has been stopped successfully..
Log(2):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Initialization failed. Service not started. [ntservmain.cpp 1269].
Log(3):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Cannot open Profile
sapgrp\sapmnt\PRD\SYS\profile\START_D21_sapapp1. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 902].
For SQL Server(The one which Cluster cannot move group to):
Log(1):
The description for Event ID ( 35712 ) in Source ( SAPPRD_01 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: , , , , , , , , , , r, e, c, v, 1, 0, 0, 5, 4, , , , , , , , , , , , , , , , , , , , N, i, I, R, e, a, d, r, e, c, v, , , , n, i, x, x, i, ., c, p, 4, 2, 4, 5, , , , , , , , , , , , , , , , , , , , , , , , , , , recv10054 NiIReadrecv nixxi.cp4245.
Log(2):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: SAP Service SAP???_?? has been stopped successfully..
Log(3):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Initialization failed. Service not started. [ntservmain.cpp 1269].
Log(4):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Cannot open Profile
sapgrp\sapmnt\PRD\SYS\profile\START_D20_sapdb2. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 902].
Regards,
Daniel

Similar Messages

ORA-07445 DB cannot start after restarting

After when server restarting DB cannot start below show alert log, please help because I`m totaly new in Oracle and can`t understand
alter database open
Beginning crash recovery of 1 threads
Started redo scan
Completed redo scan
63227 redo blocks read, 1128 data blocks need recovery
Started redo application at
Thread 1: logseq 31214, block 195852
Recovery of Online Redo Log: Thread 1 Group 3 Seq 31214 Reading mem 0
Mem# 0: D:\ORACLE\ORADATA\UAIS\REDO03.LOG
Recovery of Online Redo Log: Thread 1 Group 4 Seq 31215 Reading mem 0
Mem# 0: D:\ORACLE\ORADATA\UAIS\REDO04.LOG
Exception [type: ACCESS_VIOLATION, UNABLE_TO_READ] [ADDR:0x7FFFFFFE] [PC:0x7FEFE6311C8, {empty}]
Errors in file f:\oracle\diag\rdbms\uais\uais\trace\uais_ora_15528.trc (incident=401360):
ORA-07445: exception encountered: core dump [PC:0x7FEFE6311C8] [ACCESS_VIOLATION] [ADDR:0x7FFFFFFE] [PC:0x7FEFE6311C8] [UNABLE_TO_READ] []
Incident details in: f:\oracle\diag\rdbms\uais\uais\incident\incdir_401360\uais_ora_15528_i401360.trc
Errors in file f:\oracle\diag\rdbms\uais\uais\incident\incdir_401360\uais_ora_15528_i401360.trc:
ORA-00607: Internal error occurred while making a change to a data block
ORA-00602: internal programming exception
ORA-07445: exception encountered: core dump [PC:0x7FEFE6311C8] [ACCESS_VIOLATION] [ADDR:0x7FFFFFFE] [PC:0x7FEFE6311C8] [UNABLE_TO_READ] []
Process debug not enabled via parameter _debug_enable
Wed Dec 25 16:12:13 2013
Trace dumping is performing id=[cdmp_20131225161213]

Data block was corrupted. So please check which table block was corrupted
Getting ORA-7445 [ksmudr()+40], ORA-607 and ORA-602 Errors When Trying To Update a Table (Doc ID 234580.1)

Re Post: Http server cannot start after running the following JSP

Hi,
I have 9iAS 1.0.2.2 and it has been working fine.
My http server was running fine until I ran the following Jsp. Now I cannot start the Http server at all.
I check the Oracle home and the path and make sure they match (i.e. if my Oracle Home is iSuites, I have the PATH variable: c:\oracle\isuites\bin as the 1st one. And I reboot the system after I changed the Oracle Home, check the PATH variable etc.)
I also check the oci.dll files, and I have the oci.dll file in the following directories:
c:\oracle\ora81\BIN 87KB
c:\oracle\806\BIN 38KB
c:\oracle\iSuites\BIN 87KB
I check the Registry (regedit) and found that I have ORACLE_HOME_KEY for ora81 home, iSuites home, but not
806 home. And there are oracle.key files in c:\oracle\ora81\bin, c:\oracle\806\bin, c:\oracle\isuites\bin .
The contents of oracle.key in c:\oracle\ora81\bin and c:\oracle\isuites\bin are correct (i.e. "Software\ORACLE\HOME0" "Software\ORACLE\HOME2" respectively.) However, the content in c:\oracle\806\bin is "Software\ORACLE" .
Will this be a problem because there is no corresponding ORACLE_HOME_KEY for 806 in regedit?
OR
the OCI.DLL file is corrupted in one of the above directory.
Below is the JSP code that I ran. Before that, my HTTP server is started correctly.
I really appreciate if someone could give me some pointers about this.
I also suspect that when the HTTP server was brought down for some reasons and it was not a clean shutdown.
So how can I shutdown the http server cleanly before restarting that?
Thanks;
Kelly.
<%@ page language="sqlj"
import="sqlj.runtime.ref.DefaultContext,oracle.sqlj.runtime.Oracl
e" %>
<HTML>
<HEAD> <TITLE> The SQLJQuery JSP </TITLE> </HEAD>
<BODY BGCOLOR="white">
<% String empno = request.getParameter("empno");
if (empno != null) { %>
<H3> Employee # <%=empno %> Details: </H3>
<%= runQuery(empno) %>
<HR><BR>
<% } %>
<B>Enter an employee number:</B>
<FORM METHOD="get">
<INPUT TYPE="text" NAME="empno" SIZE=10>
<INPUT TYPE="submit" VALUE="Ask Oracle");
</FORM>
</BODY>
</HTML>
<%!
private String runQuery(String empno) throws
java.sql.SQLException {
DefaultContext dctx = null;
String ename = null; double sal = 0.0; String hireDate = null;
StringBuffer sb = new StringBuffer();
try {
dctx = Oracle.getConnection("jdbc:oracle:oci8:@", "scott",
"tiger");
#sql [dctx] {
select ename, sal, TO_CHAR(hiredate,'DD-MON-YYYY')
INTO :ename, :sal, :hireDate
FROM scott.emp WHERE UPPER(empno) = UPPER(:empno)
sb.append("<BLOCKQUOTE><BIG><B><PRE>\n");
sb.append("Name : " + ename + "\n");
sb.append("Salary : " + sal + "\n");
sb.append("Date hired : " + hireDate);
sb.append("</PRE></B></BIG></BLOCKQUOTE>");
} catch (java.sql.SQLException e) {
sb.append("<P> SQL error: <PRE> " + e + " </PRE> </P>\n");
} finally {
if (dctx!= null) dctx.close();
return sb.toString();
%>

I had this problem and the pkgchk mentioned above helped to get the admin server going (thanks!) but I could not run the admin console. I saw:
Exception in thread "main" java.lang.UnsupportedClassVersionError: org/GNOME/Accessibility/JavaBridge (Unsupported major.minor version 49.0)
It turned out that something (I suspect the patch) had replaced my java1.5.0_06 binary with a java1.4.2_03 binary - but left the java1.5 directory structure alone! i.e. looking in /usr/jdk would have indicated that java1.5 was installed, but when I ran jdk1.5.0_06/bin/java -version , it reported java version "1.4.2_03". I was unimpressed.
I ended up removing all the SUNWj5* packages and reinstalling them and then I could start the admin console.
Now to find out what other damage this patch might have caused.....

Http server cannot start after running the following JSP

Hi,
I have 9iAS 1.0.2.2 and it has been working fine.
My http server was running fine until I ran the following Jsp. Now I cannot start the Http server at all.
I check the Oracle home and the path and make sure they match (i.e. if my Oracle Home is iSuites, I have the PATH variable: c:\oracle\isuites\bin as the 1st one. And I reboot the system after I changed the Oracle Home, check the PATH variable etc.)
I also check the oci.dll files, and I have the oci.dll file in the following directories:
c:\oracle\ora81\BIN 87KB
c:\oracle\806\BIN 38KB
c:\oracle\iSuites\BIN 87KB
I check the Registry (regedit) and found that I have ORACLE_HOME_KEY for ora81 home, iSuites home, but not
806 home. And there are oracle.key files in c:\oracle\ora81\bin, c:\oracle\806\bin, c:\oracle\isuites\bin .
The contents of oracle.key in c:\oracle\ora81\bin and c:\oracle\isuites\bin are correct (i.e. "Software\ORACLE\HOME0" "Software\ORACLE\HOME2" respectively.) However, the content in c:\oracle\806\bin is "Software\ORACLE" .
Will this be a problem because there is no corresponding ORACLE_HOME_KEY for 806 in regedit?
OR
the OCI.DLL file is corrupted in one of the above directory.
Below is the JSP code that I ran. Before that, my HTTP server is started correctly.
I really appreciate if someone could give me some pointers about this.
Thanks;
Kelly.
<%@ page language="sqlj"
import="sqlj.runtime.ref.DefaultContext,oracle.sqlj.runtime.Oracl
e" %>
<HTML>
<HEAD> <TITLE> The SQLJQuery JSP </TITLE> </HEAD>
<BODY BGCOLOR="white">
<% String empno = request.getParameter("empno");
if (empno != null) { %>
<H3> Employee # <%=empno %> Details: </H3>
<%= runQuery(empno) %>
<HR><BR>
<% } %>
<B>Enter an employee number:</B>
<FORM METHOD="get">
<INPUT TYPE="text" NAME="empno" SIZE=10>
<INPUT TYPE="submit" VALUE="Ask Oracle");
</FORM>
</BODY>
</HTML>
<%!
private String runQuery(String empno) throws
java.sql.SQLException {
DefaultContext dctx = null;
String ename = null; double sal = 0.0; String hireDate = null;
StringBuffer sb = new StringBuffer();
try {
dctx = Oracle.getConnection("jdbc:oracle:oci8:@", "scott",
"tiger");
#sql [dctx] {
select ename, sal, TO_CHAR(hiredate,'DD-MON-YYYY')
INTO :ename, :sal, :hireDate
FROM scott.emp WHERE UPPER(empno) = UPPER(:empno)
sb.append("<BLOCKQUOTE><BIG><B><PRE>\n");
sb.append("Name : " + ename + "\n");
sb.append("Salary : " + sal + "\n");
sb.append("Date hired : " + hireDate);
sb.append("</PRE></B></BIG></BLOCKQUOTE>");
} catch (java.sql.SQLException e) {
sb.append("<P> SQL error: <PRE> " + e + " </PRE> </P>\n");
} finally {
if (dctx!= null) dctx.close();
return sb.toString();
%>

Hi Jim,
I have the same environment with almost similar problem, no IIS services being started, but HTTP_Server still failed to start. Below log:
+10/09/28 23:35:04 Start process+
+[Tue Sep 28 23:35:06 2010] [warn] pid file c:/oracle/frhome_1/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous+
Apache run?
ap_spawn_child: Bad file descriptor
Couldn't fork child for piped log process
Regards,
Chai
Edited by: user13350226 on Sep 28, 2010 9:14 AM

ColdFusion 11 Application Server 3284 | ColdFusion 11 Application Server cannot be found...

Trying to roll this server into production but keep having errors popup on Event Viewer:
After dealing with the issue of not being able to restart the CF service and applying the hf1100-3776060.jar hotfix - I continue to receive the following error
====================
The description for Event ID 3 from source ColdFusion 11 Application Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ColdFusion 11 Application Server
3284
the message resource is present but the message is not found in the string/message table
=====================
Any help will be greatly appreciated!
Thank you!

Hi Car, there were no errors registered by ColdFusion under the CF11\cfusion\logs coldfusion-error log but the error below continues to show during CF Application stop-start services.
Anit Kumar Panda - followed the steps and was able to restart all services. during that time i received the following error on eventvwr.msc
======================
The description for Event ID 3 from source ColdFusion 11 Application Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ColdFusion 11 Application Server
4140
the message resource is present but the message is not found in the string/message table
======================
Thank you, very much, for all your assistance!

Application authentication works fine after restart

Team,
I have a problem with an application. when the users start working it works fine. After some time it starts problem.
Login page will not allow to login. As we observed threads start stuck at login page authentication.
Application configured to external LDAP authentication,we verified LDAP sever level performance which is normal.
But when we restart the managed server on which the application is hosted, it works normal.
Authentication process:
Applicaiton checks for username existance in an oracle DB , if it is found then it is authenticated by LDAP.
Observations:
Increase in opensocket count to 250 approx(Native IO is Enabled)
Appllication Authentication level Threads stuck
Session timeout = 3600 seconds
Environment:
Weblogic server 8.1.4.0
OS: Solaris 10
What are the parameters do i need to check in weblogic server ?
If there is a problem with LDAP server application should not work after restart of the managed server.
Also checked that the session bean deployed to check the user id in the database returned result quickly during the issue.
Note: The session bean is deployed on a different managed server(conection pool on different server)
LDAP,DB level query returns are fine when there is issue.

Can you first located the problem?
Click on the domain_name, monitoring, health. This shows an overview of all the server and their health.
When you open a certain tree, the heath per subsystem is shows.
In your case (stuck threads) you can click on the threadpool. Now a screen is shows that shows the threads
in the stuck column it is shown which thread is stuck.
You can create a thread dump and than analyze it to see what is being called by the thread

Sun Java Application Server 9 Start Up Woes

Hi,
I was asked to install the netbeans 5.5 IDE (which comes with Java Application Server 9 bundled with it) and basically learn how to develop using JMS. After installing everything and following the JavaEE tutorial, I began to set everything up. I get hung during the Sun Java Application Server 9 start up.
It attempts to bind to my host name. After a week of research as to the cause, i discovered that the problem is that the server gets my host name from DNS and uses that as its bind location. The software running at my place of business prevents me from making connections such as these with anything but localhost connections.
I descovered this when I read on here from another topic that i should try and start the server after disabling my network card. This method works in that the server starts up, no longer using my host name as the host but rather using localhost. Now this in no way fixes my problem.
I was wondering if there were any workarounds that would force the application server or netbeans or whatever to use localhost isntead of doing a host name lookup?
The error I got was a NoRouteToHostException, and when I disabled my network card that error went away, the error changed to UnknownHostException, but the server started up and I was then able to go to the admin page and deploy applications (but not run)
P.S. I was going to post the output of the server start ups, but the size is crazy long, if you have a way for me to remove the stack trace I would be glad to give it a try.
-SonOfThor
Message was edited by:
SonOfThor
Linux Fedora Core, by the way.

I switched to ActiveMQ and it works perfectly.
The issue had to do with Netbeans, no matter how many config files i changed, always used my computername.host.com:8686 instead of localhost:8686.
ActiveMQ starts and runs beautifully because it binds to localhost:8686.
I dont know what the problem was, Ive read lots of solutions saying its firewall or a firewall like process. I'm running bare bones Linux Fedora Core with no extra programs. I insured my firewall was turned off before even posting this. I spoke with my IT guys and they said that the firewall thats set up here at work does not block port binds.
My conclusion: IDEs are more of a pain then they want you to believe, im going back to terminal commands.

Why are we getting 'Coldfusion 10 application server cannot be found'?

Our ColdFusion 10 Application Server would not start. It was running fine since server inception back in July until I got back to the office from vacation yesterday. Looking at the Event Viewer 'application' log, it's showing the following message:
"The description for Event ID 259 from source ColdFusion 10 Application Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event: ColdFusion 10 Application Server."
I thought that the issue was caused by Hotfix 14. So I manually removed the hotfix and rebooted the server couple of times. However, ColdFusion still wouldn't start. Has anyone came across this issue before? I look forward to your response. Thanks.
Best regards,
Chung Lee

Hello Carl V.,
Thank you for you reply. I digged through the coldfusion-error.log and the exception.log and came across errors that were last generated on 12/17/2014. On the exception.log, it's showing the following:
"Error","Thread-17","12/17/14","15:15:54",,"Could not initialize class java.awt.Toolkit"
java.lang.NoClassDefFoundError: Could not initialize class java.awt.Toolkit
    at java.awt.Component.<clinit>(Unknown Source)
    at coldfusion.document.JPedalFontRegistry.init(JPedalFontRegistry.java:40)
    at coldfusion.document.DocumentServiceImpl.initializeDocumentService(DocumentServiceImpl.jav a:211)
    at coldfusion.document.DocumentServiceImpl.access$000(DocumentServiceImpl.java:52)
    at coldfusion.document.DocumentServiceImpl$1.run(DocumentServiceImpl.java:180)
"Error","localhost-startStop-1","12/17/14","15:15:55",,"Unable to initialise JAI service: java.lang.NoClassDefFoundError: java.awt.Toolkit"
java.lang.NoClassDefFoundError: java.awt.Toolkit
    at sun.awt.AppContext$2.run(Unknown Source)
    at sun.awt.AppContext$2.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.AppContext.initMainAppContext(Unknown Source)
    at sun.awt.AppContext.access$200(Unknown Source)
    at sun.awt.AppContext$3.run(Unknown Source)
    at sun.awt.AppContext$3.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.AppContext.getAppContext(Unknown Source)
    at javax.imageio.spi.IIORegistry.getDefaultInstance(Unknown Source)
    at coldfusion.server.CFService.setupImageProviders(CFService.java:707)
    at coldfusion.server.CFService.start(CFService.java:690)
    at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:110)
    at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:86)
    at javax.servlet.GenericServlet.init(GenericServlet.java:158)
    at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
    at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
    at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1284)
    at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1197)
    at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1087)
    at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5210)
    at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5493)
    at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
    at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1559)
    at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1549)
    at java.util.concurrent.FutureTask.run(Unknown Source)
    at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)

Multiple LV instances, web server cannot start, port already in use

Hi there,
I have a general question about webserving VIs in case either
a) multiple instances of the LV development environment are running (this is possible in windows XP for instance when "switch users" is allowed and each user launches LV)
b) multiple compiled LV executables are run by the same user
c) any mixture of the two above
I have an application case when either of the three above would be a very good solution, was not for the problem encountered. Say, b): the user is given two deployed executables, and can decide to run either or both concurrently. Moreover, I want these applications to be visible on the web, so they are compiled with the webserver turned on, default settings.
The problem I've seen (LV8.5.1, winXp for sure, but I think I've seen it as well in linux and other versions as well) is that each new instance of the LV engine tries to get hold of the tcp port (default 80), so that all instances beyond the first complain about "The Web Server cannot start. Is the Web Server port already in use?"
While I can understand the origin of the message, and found some posts on the forums somehow related to it, I don't like it too much.
I could think only of two workarounds here: 1) set different web server ports for each LV instance, and instruct the remote users to direct their browsers to a webserverort link to access each VI; 2) run all the applications from the same instance of the LV dev system. The latter is not so convenient for me, due to conflicts in global VIs between all instances of the applications [compiling executables IS a way to privatize memory spaces in this case, AND global variables are imho well justified for the fairly complex application I have in mind here].
Is there a third, more elegant solution perhaps, which I'm missing?
Thanks, Enrico

NathanK wrote:
What is it in particular that you dislike about the message?
How would you like LabVIEW to behave in this case?
No problem with the message, but I'd just be very happy if a single
web server would serve all my instances of the executables on the same
port. I.e., if 2.exe is open and wants to start another server on the
same port used already by 1.exe, then 2.exe becomes served by the
server already opened. Am I demanding too much? Am I missing some
necessary logic?
At the moment, anyway, I'm stuck with the vi being served correctly,
but not the compiled application, and I can't figure out why. It's
LV8.5.1, and yes, I have in the .ini
WebServer.DirectoryIndex="index.htm"
WebServer.LogPath=C:\Program Files\National Instruments\LabVIEW 8.5\www.log
WebServer.MimeTypes="htm;text/html;gif;image/gif;jpg;image/jpeg;png;image/png;txt;text/plain;html;text/html;jpeg;image/jpeg;css;text/css;llb;application/x-labview-llb;vi;application/x-labview-vi;doc;application/msword;dot;application/msword;bin;application/octet-stream;exe;application/octet-stream;rtf;application/rtf;pdf;application/pdf;ai;application/postscript;eps;application/postscript;ps;application/postscript;csh;application/x-csh;gtar;application/x-gtar;gz;application/x-gz;sh;application/x-sh;tar;application/x-tar;zip;application/zip;hqx;application/mac-binhex40;ua;audio/basic;wav;audio/wav;tif;image/tiff;tiff;image/tiff;xbm;image/x-xbitmap;rtx;text/richtext;qt;video/quicktime;mov;video/quicktime;avi;video/x-msvideo;movie;video/x-sgi-movie;aif;audio/aif;aifc;audio/aif;aiff;audio/aif;aim;application/x-aim;dif;video/x-dv;div;video/x-dv;js;application/x-javascript;pntg;image/x-macpaint;xlb;application/vnd.ms-excel;xls;application/vnd.ms-excel;ppa;application/vnd.ms-powerpoint;ppt;application/vnd.ms-powerpoint;pps;application/vnd.ms-powerpoint;pot;application/vnd.ms-powerpoint;pwz;application/vnd.ms-powerpoint;mid;audio/mid;midi;audio/mid;enc;video/mpeg;m1v;video/mpeg;mp2;video/mpeg;mpa;video/mpeg;mpe;video/mpeg;mpeg;video/mpeg;mpg;video/mpeg;psd;image/x-photoshop;bmp;image/bmp;pic;image/pic;ra;audio/vnd.rn-realaudio;rf;image/vnd.rf-realflash;rm;application/vnd.rn-realmedia;rp;image/vnd.rn-realpix;ram;audio/x-pn-realaudio;rmm;audio/x-pn-realaudio;rnx;application/vnd.rn-realplayer;rt;text/vnd.rn-realtext;rv;video/vnd.rn-realvideo;smi;application/smil;ssm;application/streamingmedia;sithqx;application/mac-binhex40;sit;application/x-stuffit"
WebServer.Port=80 [### or 8000]
WebServer.Enabled=True
WebServer.RootPath=C:\Program Files\National Instruments\LabVIEW 8.5\www
WebServer.TcpAccess="c+*"
WebServer.ViAccess="+*"
[hints welcome here]. That is, I'm at the moment unable to use even my workaround 1 above.
Enrico

SOA 10.1.3.3 Application server cannot use db 11.1.0.6.0 for orabpel user

RDBMS Version: 11.1.0.6.0
Operating System and Version: win 2000 sp4
Error Number (if applicable):
Product (i.e. SQL*Loader, Import, etc.): SOA Suite Application Server 10grel3
Product Version: 10.1.3.3
SOA 10.1.3.3 Application server cannot use db 11.1.0.6.0
For testing purposes I would like to setup a new system with Oracle Aopplication Server 10g rel 3 (10.1.3.3) Soa suite on top of an already installed Oracle Database 11.g (11.1.0.6.0)
Database 11g was installed on the server
During installation of the Application server 10g3(Full install) a database is needed (for orabpel schema etc), but the installer checks if the version of the database is higher than 9i2 . This check fails and installation cannot continue. I think this is because the check is not really if it is higher than 9i but it is looking for a predefined range of versions from V$VERSION and 11 is not within that range
Is there a possibility to overcome this? This is not a prerequisite check from OUI, but another check later on during install
I know that 11g is not certified yet for AS1og3, but this is a development environment to practice with the new releases.

I know that 11g is not certified yet for AS1og3, but
this is a development environment to practice with
the new releases.If the combination is not certified, it's not much of a development platform, right?

Iplanet application server not starting

I am trying to deploy an application on weblogic server..........when i stop my weblogic server and look into another application which is on iplanet server the application server doesnot start .
and gives me the following error
" [19/Apr/2005 14:30:36:2] error: DSYNC-004: ''GetRoleOfCurrentEngine'': No Primary; Synchronizer will operate in Standalone mode
[19/Apr/2005 14:30:36:2] info: LCYCMGR-002: registered component of type Dsync2 "
Are there some compliance issues when u have 2 different application servers on 1 pc.
any other suggestions would be appreciated
-raj

Hi,
I was able to resolve this issue earlier with the below reference.
please check the doc ID 657411.1 on oracle support .(E-AS: exec PSSRCHSRV: CMDTUX_CAT:1685: ERROR: Application initialization failure [ID 657411.1])
It says the error might be because of the Add to Path.
check if this helps you in resolving the issue.
Shilpa

OCS 10.1.2 on Win2003 - mail application cannot start after rebooting serve

Hi
We have installed OCS 10.1.2 on Win2003 (single box) and the mail appln was running OK after the installation. On rebooting the server, we found some components that were not started (eg Internet directory for Infra) which we started manually via EM.
The Mail application however cannot be started giving the error message for all the mail components:
- failed to start a managed process after the maximum retry limit
We tried to start it manually using
- oesctl startup midtierhost:um_system:xxx
and even got the message:
- All processes already started for midtierhost:um_system:xxx
However, in EM, or when doing a
- oesctl show status midtierhost:um_system:xxx, we get the error message:
- midtierhost:um_system:nntp_in:116107583446856959 <no response>
Any idea of where we can check to see what's going wrong? I'm not sure of where to check the logs for possible errors.
Thanks for your assistance

Glad I could be of help - maybe you could help me out too, please? I have the following problem: when I create an appointment with Calendar, and add some participants to it (with email notifications option checked), at first everything seems to go the right way.
But if I delete the appointment/meeting, the following happens:
- the notifications regarding the delete of the meeting are not sent
- the whole mail system seems to hang, and I am not able to send emails anymore
Do you have the same behaviour on your installation? It would be useful to me just to know if other people are having this trouble....
Thank you!

Is there a way that I can get Automator to start a server for me after restart of Mac

Hello!
I have a serverprogram from an external company that doesnt start after a restart of the mac that I run that server on. It starts the program but it doesnt start up the server of the program. All settings are right and I have consulted others with same config. After a restart the server turns up in the statusbar but as turned off. So I can go to the statusbar, click on the symbol and choose "start server".
As I cant get the server to start up automaticly I was wondering if I can get the automator to start it up for me after a restart of the mac?
Ifso how?
/ Mikke
Macmini i5 Mavericks

I found out how to make a flow and how to make a program of that. BUT it wont execute after restart. Anyone?

Cannot start 2nd form on same application server when starting script in 1s

Hello,
we have a forms application running on a productive application server and the same application for different testing db's on a test application server.
Within this application I can start a stored procedure that writes a spreadsheet via utl_file. Depending on the parameters used this might last 1 - 2 hours. When I start the procedure the forms application is blocked as expected until the procedure is finished. This would be no problem if there wouldn't happen a strange thing to some users: When they start the procedure every forms application on the same application server is blocked. This means they can work in production when they start the procedure in test environment but they can not open another test application and vice versa.
As this only happens to some users (yet always the same) I'm lost where I have to search. I found no differences on the client machines, these are installed by a central administration tool.
Has anyone an idea where I can start searching?
Regards
Marcus
Forms 9.0 (Form Compiler) Version 9.0.4.3.0 (Production)
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
PL/SQL Version 9.0.1.5.0 (Production)
Oracle Procedure Builder V9.0.4.3.0 Build #0 - Production
Oracle Virtual Graphics System Version 9.0.1.11.0 (Production)
Oracle Multimedia Version 9.0.4.1.0 (Production)
Integration der Oracle-Werkzeuge Version 9.0.4.0.0 (Production)
Oracle Tools Common Area Version 9.0.2.12.0
Oracle CORE 9.0.1.2.0 Production

Hello,
I first wondered why this is happening only to some users. Now I found that it depends on the habit how the application is called.
The applications are called from IE with separateFrame=TRUE.
While I have a link in my XP start menue for every application and therefore start IE anew every time, other users use a website which has the same links. The difference I saw is, that I get a Java console for every application, whereas applications started from the same instance of IE share the same Java console.
So now we have a workaround (start IE again) but I still don't know why this is happening at all.
Regards
Marcus

Application Server Auto Start

Its really rare that i am able so autostart my infrastructure and middle tier( both on same server) at system startup. I dont know with i do something wrong or is there problem with appserver
Right now i have autostart disabled but now i am facing aanother problem. I started listener and then asdb (infrastructure database) and opmn is showing status of HTTP_server as BOUNCE, before this i used emctl start iasconsole command which started my enterprose manager and also started all opmn managed processes but startus of my HTTP_Server was "Stop" and it was not working, i restarted my server and now before startign iasconsole i started opmn using "opmnctl start" command and then when i look at the status of all components, all are down but status of HTTP_Server is "Bounce"
How to solve this.
should i use some other method to start all components ?
Regards

Hi,
i have posted the script i use to start application server 10g (9.0.4) after server reboot in this post
Oracle App Server Recovery process after System restrat
have a look
Best Regards
Rui Madaleno

Application Server cannot start after restart

Similar Messages

Maybe you are looking for