Application shows as failed after being patched by WU.

Hi,
I am using SCCM 2012 sp1 cu5 and my clients are running W7 sp1 x64
I have installed Lync 2010 x64 RTM version 4.0.7577.0 to the clients (it also uses a transform to set the lync server name). The installation went fine and sccm client detected the presence of the applicaton (set as by MSI product code and file version number),
and it showed as installed in software center and displayed as detected in the appenforce log.
Then I let windows update (from SCCM) patch lync to bring it up to 4.0.7577.4419 and the app upgrades and shows the correct updated version number and everything works. However when the application evaluation scan runs again, it shows the application
as failed with a Status of 'Past due - Will be retried' in the software center (i.e. the orig deployment of 4.0.7577.0), and the appenforce log shows as this is not now detected. Which makes sense since it has been upgraded, but is there anyway of telling
sccm that it is now an upgraded version so that it will not show as failed, and will stop telling the users that there is a package waiting to be installed?
I did try to add the lync 2010 4419 rollup as a deployment and used the detection as the new MSI product code and file version, and the app had a dependency on the RTM version. This all worked fine and displayed as installed and as detected in appenforce,
until the detection process ran again and it then showed as failed in software center and not detected in appenforce log.
Has anyone else seen this strange detection process for lync 2010 x64? Could it be the transform is trying to repair itself, although I can't see that in any of the logs or on the screen.
I've checked and doubled checked that the product code and file versions are correct, and it does say installed and detected on first installation, so I'm not sure of the process to fix this.
Letting windows update patch is the preferred way to go for me, since there will be updates in the future, but how do I stop it from detecting the original deployment now that it is patched and at a higher version?
Thanks
Jaz

I think the easiest way would be to change your detection method to the presence of a file.
I use "communicator.exe" for Lync. That would solve your problem.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Similar Messages

My ipod touch battery shows up empty after being charged

Hi, I have had my Ipod touch generation four for a few months and I have noticed in the past week that the battery doesnt show up charged after being fully charged it just displays empty. When I go into an app or a game the battery shows up green and fully charged. So far I have done a full restore and it didnt change the battery at all. The only thing that I had changed in the past week was I downloaded an album onto my computer then put it into my ipod and downloaded a game. Does anyone have any suggestions? Thanks

Have you tried a reset?
Stedman

SRM catalog navigation fails after Microsoft patch KB2416400

After applying Microsoft patch KB2416400, displaying catalogs is failing in IE7 and IE8. Getting the "Navigation to the webpage was canceled"... If you uninstall the patch, it will fix the issue in IE7. I have already reviewed the settings found in OSSN 1511147, which has not solved the issue when the patch is applied. Has anyone else applied this IE security patch and experienced similar results? We are on SRM7.0, SP05 - EP and catalogs both using https. Thanks.

Hi Kris,
we found a solution. Please look in SAP Note 1456162.
The note was written for IE 8, but it looks that the MS patch KB2416400 provides the same security measure also for IE 7.
IE7 does not allow the dynamic rendering of html by the outbound handler after the patch.
Cheers,
Jan

SBS 2008 Security report not showing correct status after Feb patch cycle

Hello,
I wonder if anyone can shed any light on this strange problem which has occurred after February patch cycle. On the SBS detailed report that comes through, the security section is showing as RED error. Though
if you look at the detail, each section is listed as green compliant. Not sure why this has happened? Has anyone else seen this before?
Many thanks,

Hi,
Can you provide me the detailed information about the patch you installed before the issue occurred? Have you tried to uninstall the patch and reinstall it again to see if the same issue persists?
In addition, please also try to repair the monitoring and reporting feature to see if it could resolve the issue.
Repair monitoring and reporting features in Windows Small Business Server 2008
http://technet.microsoft.com/en-us/library/dd560614(v=ws.10).aspx
Hope this helps.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Check Db fails after kernel patch update

Hi,
I've updated kernel 710 to the latest patch "159" on my PI 7.10 system, however now Check DB fails when scheduled from DB13 with a
"Scheduling failed" error.
We have SQL 2005 & I'm able to execute the job succesfully via the SQL Managemnt console.
Also, all the other background jobs are working just fine.
Pls. help.
Thanks,
Saba.
Edited by: Rajeev Ganju on Jul 22, 2009 2:37 PM

Hello,
Since I'm on SQL, I use DB13 just for Check DB.
I've tried deleting everything & recreating the schedule, but it has'nt helped.
Even after rescheduling, SM37 doesnt reflect the scheduled jobs.
Thanks,
Saba.
Edited by: Saba Sheikh on Jul 23, 2009 9:21 AM

Backup fail after kernel patches updated

Hello friends
i have update kernel pathes. then backup is failing cont. now my patch level is 114.
im getting error please suggest.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000235, user ID BASIS1)
Execute logical command BRCONNECT On host sapodev
Parameters: -u / -jid STATS20080731152625 -c -f stats -t ALL
BR0801I BRCONNECT 7.00 (11)
BR0805I Start of BRCONNECT processing: cdymghmx.sta 2008-07-31 15.26.27
BR0252E Function fopen() failed for '/oracle/SAD/sapcheck/connSAD.log' at location main-11
BR0253E errno 13: Permission denied
BR0121E Processing of log file /oracle/SAD/sapcheck/connSAD.log failed
BR0806I End of BRCONNECT processing: cdymghmx.sta2008-07-31 15.26.31
BR0280I BRCONNECT time stamp: 2008-07-31 15.26.31
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
thanks & regards
sachin

Hi,
I think some of the answers are partially correct.
For the full and correct solution you must
> Check the owner, group, and access authorizations for BR*Tools and SAPDBA in accordance with Note [113747|http://service.sap.com/sap/support/notes/113747].

Instance failed after applying patch

i am learning on ides. i applied patch #10 to my system, some how it failed to apply, now my instance is not starting up , is there any way to undo the patch. thanks for the reply

Hi,
Usually instance startup is nothing to take with the Patches applied specially in ABAP kind of system. If your Patch implementation is in middle, So you must be getting lots lots of dump...But system should come up in most of cases.
Ok...Now...have you changed something related to Parameters (Memory, DB related or any other parameters)...because parameters change is something very crucial when your system is not coming up?
Please post some more inforrmation so that we can help you out.....Please try to debug step wise...
1) is DB is coming up?
2) if yes, please post some relevent info from dev_disp, dev_w0 or dev_ms file or from some other files which are getting updated when you are trying to restart your system.
With Regards,
Saurabh
Edited by: Saurabh.Arora on May 17, 2009 9:34 PM

External hard rive showing no information after being plugged into mac

plugged a external hardrive into my mac it had information from another format on it windows now its showing theres nothing on there when converting format to run with windows, i have ran a iskysoft data recovery program it seems like its found a lot of the files lost, when its says do you wish to recover them i obviously have to pay them for the full program. before i do this can any one help me out as dint want to waste the money if its not going to work. the files are not mac format so not sure if it will get them back????

osx is unable to read data from a different format. so your only option is to get to your data using windows or yes, pay heavily for third party software to retrieve.

Ipad2 showing black screen after being upgraded to ios5

I upgraded IPad2 to ios5 through Mac, since then - for 5 hours - it has apple on black screen and mur-murs something every 5 minutes. For how long might it continue ?

Hello BitMazta, please tell us a little more about your computer:1.) More detail on the model number (example Probook 4710S).2.) How much ram does your computer have? 3.) I have two great links at this recent thread that could help you: Upgrade to Win 10 Good luck!

Links to external files do nothing after being burned to disk

I built a product catalog a while ago in CS4 and now I've had to edit it in InDesign CS5. With InDesign CS4, everything worked fine. The files were linked and then all the file were burned to disk, all the files worked on the disk (links, etc). I have since edited the files in InDesign CS5. I build the catalog, created all the links (interior within the same pdf, links to external pdfs and other file types). Everything works on the computer but somehow fails after being burned to disk.
My sequence was like this:
Set up product catalog last year with links and files, everything was fine and worked as expected.
Opened the file, made my edits.
Made links between the pdf's pages and from the pdf to external pdfs and videos etc. All of these links work in the pdf.
Burn the files to a disk
Some of the old links work
All the links within the main pdf work
None of the new links to external files work. I click the link and nothing happens. The paths are exactly the same as the previous version
I have tried:
Examining the links, everything is based on pseudo relative paths (last year it worked fine)
Burning the disk on a Mac and a Windows XP
Please help. Any and all help is very much apprecitated.

I figured it out.
I created the links in InDesign by making an interactive link to a file. When I open the file in Acrobat, the links work fine over the network. I burn to disk and the links no longer work.
Problem: At some point, InDesign changes the "open file" hyperlink command in InDesign into a URL webpage request in Acrobat.
Solution: So basically, I now have to go into the file in Acrobat and change all the buttons from "open web link" to "open file." It's only a product catalog with about 1,200 links that's due today.

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn that app back on. Would there be any way I would be able to get the data from that app?

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn the app back on. Would there be any way I would be able to get the data from that app onto my phone? Is it possible to put an old back-up on my phone?

LukaPetranovic wrote:
Hello anita4323.
I hope this will help you with your problem:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
You can restore your backup whenever you want from iTunes or iCloud, depending where you made it.
Let us know if you succeeded or need any further help.
I believe you are missing the point. The OP has already restored from back up, but failed to include a specific app in the back up and is trying to recover data for it, which in this case is not possible.

Migration Assistant fails after showing 157 KB or 0 KB to transfer

I spent 4 days trying to get OS X Migration Assistant to successfully migrate between two desktop machines, both running Mavericks 10.9.3.
The two machines were connected by an ethernet cable, and all migrations would fail after 16-24 hours, with the progress bar stalling out at "Less than one minute remaining".
Before every failed transfer, Migration Assistant would inaccurately show "157 KB selected" for transfer if the "Computer & Network Settings" option was checked, or "0 KB selected" for transfer if only the "Applications" or "Documents & Data" options were checked.
I finally realized that the migrations were failing because I was opening and clicking through Migration Assistant on both the source and target machines at around the same time.
The eventual solution was to open Migration Assistant on the source machine first, and click through as far as I could until the source machine was actively looking for other machines on the network.
As long as I waited until then to open Migration Assistant on the target machine, it would correctly calculate the size of the files to be transferred and the migration would succeed.
So, the order in which you open Migration Assistant seems to make a big difference: source first, then target.
My problem is solved, but only after several days of hassle, so I wanted to post this in case other people had a similar issue.
(I tried many suggested fixes that did not work, included reinstalling OS X on the target machine, running disk repair and fixing permissions on both source and target, changing file sharing on the source machine to include the whole drive, trying to migrate Applications and Documents & Data separately, turning off wifi before the transfer, etc.)

Thanks for posting this. I was having the same problem. You saved me hours, maybe days, of frustration!

All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!

All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!
Error report as follows
Process:         Pages [208]
Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier:      com.apple.iWork.Pages
Version:         4.1 (923)
Build Info:      Pages-9230000~1
Code Type:       X86 (Native)
Parent Process: launchd [93]
Date/Time:       2012-08-22 12:33:15.909 +0100
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          102101 sec
Crashes Since Last Report:           11
Per-App Interval Since Last Report: 2217715 sec
Per-App Crashes Since Last Report:   4
Anonymous UUID:                      1FA704D3-D5EF-4CE3-9813-42E4559157DC
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: _SFAAutosaveUserActivityException
Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Expected in: /Library/Application Support/iWork '09/Frameworks/SFArchiving.framework/Versions/A/SFArchiving

I'm having this issue as well only with a little different twist I guess. I'm transferring the iWorks applications from my Macbook Pro 3,1 with Lion to a new MBP 10,1 running Mountain Lion. I transferred the apps over using DropCopy since the older MBP doesn't have AirPlay. Applications show up but crash upon opening. This is the first install so there are no previous plist, versions or such to delete. All three crashed upon opening every time until I just had to have Keynote and purchased again - although Apple agreed to refund that purchase since my previous version quit working. Any ideas since I don't have any previous plist/versions to delete? Thanks in adavnce for any help you can offer.
Process:         Pages [13521]
Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier:      com.apple.iWork.Pages
Version:         4.3 (1048)
Build Info:      Pages-10480000~1
Code Type:       X86 (Native)
Parent Process: launchd [153]
User ID:         501
Date/Time:       2013-03-11 14:57:02.175 -0400
OS Version:      Mac OS X 10.8.2 (12C3103)
Report Version: 10
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @rpath/SFCompatibility.framework/Versions/A/SFCompatibility
Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Reason: image not found
Binary Images:
    0x1000 -   0x354fe3 com.apple.iWork.Pages (4.3 - 1048) <3F2BE397-E81E-3355-C0DE-8B0F014E897B> /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
0x3ec000 -   0x46bff7 com.apple.iLifeMediaBrowser (2.7.2 - 546) <24A0A118-874B-3C7C-B50C-C80BED03A15F> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
0x8fe3e000 - 0x8fe70e57 dyld (210.2.3) <23DBDBB1-1D21-342C-AC2A-0E55F27E6A1F> /usr/lib/dyld

Security scans on DBMS server still show Java vulnerabilities after applying JavaVM Component patch 20233168

JavaVM Component patch 19618575 was applied to our Oracle 11.2.0.3 DBMS Windows 8 server and a security scan was done showing no vulnerabilities.
However, patch 19618575 was rolled back by Bundle Patch 34 (20227195) and Oracle released another JavaVM Component patch 20227195. We applied the new JavaVM patch successfully and the System Admin did the security scan which showed there was still a vulnerability for the JavaVM Component.
Is anyone else having this problem.

Richard,
I have just applied patch to upgrade from Portal 3.0.9 to 3.0.9.8.1 (Patch applied to loginserver and portal schema) and the External Applications that were previously set up have gone from the portlet.
Does this relate to your note at the bottom:
"Minor issues with Bulk action. 1840420 CUSTOM WRITTEN EXTERNAL AUTH MODULE NEED TO BE UPDATED AFTER 3.0.9 UPGRADE SSOXOID.PKB DOESN'T LOAD.
External authentication modules that were written before 3.0.9 need to be updated after upgrading to 3.0.9. ssoauthx.pks is updated in 3.0.9 and contains additional routines that need to be implemented." ??
If I go to the "Login Server Administration" portlet and select the link "Administer External Applications" I get a list of 5 External Applications that have previously been set up.
If I go back to the Home Page and select "customize" on the "External Applications" portlet I get the message "Your Login Server administrator has not registered any external applications".
Does that mean I should just run 'ssoauthx.pks' & 'ssoxoid.pkb' or do I need to do something else ??
Thanks
Simo

HT4623 I tried to update my husbands iphone 4 to ios 6 from ios 4.3.3. That is the only update that showed up on itunes as available. The download took 3 hours and after that the phone is the same and does not show any sign of being updated. Please hel

I tried to update my husbands iphone 4 to ios 6 from ios 4.3.3 That is the only update that showed up on itunes as an availiable update. The download took 3 hrs and after all of that the phone is the same showing no sign of being updated. We did turn it off and back on and still nothing. Can anyone please help and tell me what I need to do to update his phone. He is unable to update or downloaded apps or anything off of itunes at this point.
Thank you,
Tammy

So what happened to the phone during the process? It should have gone black and restarted a couple of times and there would have been a white progress bar as the update installed. Sounds to me like you've downloaded the update file but not actually installed it. The quickest way to see version of the software is installed is to go to Settings-General-About and check Version.

Application shows as failed after being patched by WU.

Similar Messages

Maybe you are looking for