Applications and multilanguage

I want to develop an application, which will be placed on a dutch language site. I was told the development of the application was best done while the browser was set to english, to prevent me from running into some language related bugs. As I understand, multilanguage support for applications is not implemented in current portal releases.
Is it therefore likely that I wil not run into problems when I develop the application in english, and that it will be used in dutch?
Ton

I'm using portal 3.0.6.6.5 .
And yes, I know dutch is supported, BUT I have run into lots of bugs which were language related. Dates were not displayed correctly, purging of items will not work when the browser is set to dutch, ... , ...
I had to spend lots of time in finding the cause of my problems, verifying that the problems were language related, describing the cases to oracle support, and working on workarounds.
To some level, I regret the decission we took to use dutch.
Now, when I move from using portal only so far for its content areas and pages, and going to use its application capabilities, I'd like to concentrate as much as possible on the creating of my application, and try to avoid spending more time on bug finding.
So my question still stands: Are any problems expected when I develop an application, while using english language, and place the application portlet on dutch pages.
Ton

Similar Messages

How do I install Snow Leopard while keeping files, applications, and settings

I need to update my system, I realized that I need Snow Leopard (quiet late) before Maverick. My question is, how can I install it keeping files and all the data. I found this on Internet, does it work?
Install Snow Leopard while keeping files, applications, and settings
If you follow these steps, the installer will replace your operating system if one is already present, but will preserve your account information and personal files. You may have to reinstall some applications, however.
Insert the install disc (or the first install disc if you have more than one) into your disc drive. Restart your computer while holding down the c key. This causes your computer to start up from the install disc rather than your hard drive. When you see the gray Apple insignia, release c .
The Mac OS X installer should open automatically. Follow the on-screen prompts to read and accept the license agreement and begin the installation. When prompted to choose a destination disk, select your preferred location and click Install.
When the Mac OS X installation finishes with the disc, restart your computer. After the installation completes, a configuration program may begin automatically if you are installing for the first time. You will need to supply basic setup information for your computer.
Update your system software to ensure that you have the most recent operating system components. From the Apple menu, select Software Update... , and then follow the instructions on the screen. Often, you will have to restart your computer, and you may have to run Software Update multiple times before it can completely update your system.

That's why you need to back it up. You won't need to restore the backup immediately afterwards unless something goes wrong during the upgrade, but you'll need it later; the drive will eventually fail.
(105428)

In Pages 5.5.1 when I go to the Open menu I cannot get a preview of any of the files in the list using the spacebar, which I can do in every other application and finder. Is there a workaround?

In all other applications and in the finder, if I select a document and press the spacebar I get a quickview preview of that file. It does not work in Pages when I choose Open and am given a list of files to select from. This was not the case in older versions of Pages. Is there a workaround, other than doing quickview in the Finder before going to Pages.

On Yosemite, Pages documents that are in a package (folder) format are viewable with Quick Look in the Pages v5.5.1 file chooser. Pages documents that are in the Single File (compressed, renamed folder) format are viewable in diminished size with Quick Look. Other documents that can be opened in the version(s) of Pages on your Mac will also open properly in Quick Look from the file chooser.

SSO between Portal Application and Portal Admin Tool

Hi All,
We have a requirement for implementing SSO between a Portal application and
Portal admin tool.
We are using WL Portal 8.1 SP4.
Here is the reason for this requirement -
A user logged-into Portal Application needs to login to Portal Admin tool to
do some admin activity. We want to provide a link in the portal application
using which the user can directly login to the Portal Admin tool without
having to enter the credentials again.
If someone has any info on how to implement this, can you please point me in
the right direction.
Thanks,
~Deepak

Hi,
When creating PP you have 2 options
PP used for compiling and PP used for Building
You create PP with all the libraries into Developing/Compiling Other DCs
And another PP with all the libraries into can be packaged into other build results (SDAs).
Once you have these 2 PP in place you add the DC as used DC.
And this should resolve the issue.
Hope this helps.
Cheers-
Pramod

Choosing between external and partner application and problem with login

We have an application on Oracle App Server 10.1.3.3 and we have an OID server.
I had taken this for granted that I should define the application as 'Partner Application' and not external application for single sign on.
Now that we need the 'PASSWORD' retrieved by application, we are considering defining it as an external application.
There are at least two problems I have encountered defining the application as external:
1. 'pageConfig:serverDate' is among the login form's inputs in the login page, but I can't set it in orasso 'Edit External Applications' page
2. After login using SSO as external application and when I click on the application's new link, the login page is shown with the username and password field filled, but I have to click on login button anyway (no automatic and invisible login).
I will be very grateful if someone gives a general view on the differences between external and partner, whether in this case external has to be used or partner and finally give some comment on my specific problem with login button and manual login.
Thank you

Just some information :
- The problem with LOGIN page exists. I don't have that problem with for example GMAIL when defined as external application, but with my applications in Oracle Application Server.
- There is also another thing I don't understand. The link to external application is something like:
javascript:open_jwindow('../ealogin?ID=76D4766','76');
and couldn't be executed outside pls/orasso
in other words we can't give that to our users, can we? They should login to orassso and see that?
We don't want to involve them in Identity Management...
Any help is appreciated....
Regards

ADF Application and Oracle Portal Login Page

We have developed ADF application and deployed it in Oracle AS 10.1.2 along with the custom JAAS module, which is working fine with the application custom login page. As a next page, I want to use Oracle Portal login page for the authentication and authorization.
How can I accomplished it? Any idea?
Thanks,
AP

Shay,
1. I created blank ADF project
2. I copied myreport.jsp file (this one was generated by Oracle Report Builder) under ..ViewController/public_html directory
3. Created directory 'lib' under ViewController/public_html/WEB-INF/lib
4. Copied reports_tld.jar file under the directory created in 3.
5. Created simple jspx page with the af:link (btw af:goLink does not exists in JDev 12c), set 'destination' to myreport.jsp
After the steps above I could not even compile the application, many problems too many to list here, Basically JDev is trying to build the project with .jsp file generated in Report Builder and is unable to.
So to be sure we are on the same page: I am trying to embed JSP report files generated by Report Builder into ADF project, then create EAR file and deploy on standalone WLS. Finally execute JSP web only report.

Web Application and Java Application

Hello,
I have a standalone Java application and a web application (JSP/Servlets) that I would like integrate. The standalone app. should send some information to my web app (which is not a problem), but then the user can be at this web app. for a while and then once he sees something he likes here, he can select it which should take him BACK to the standalone application. My question is whether something like this is possible?
If so, then how do i do it.
Also the web app and the standalone app run to 2 separate machines and 2 different JVM's.
Any kind of help will be great.
Thanks

Well let me describe the scenario in detail
We have a standalone java application that is good to search for data across an enterprise database. We also have another application which is web based and uses jsp's and servlets and is good for displaying data in different ways, let's say different kind of graps. Now the user will typically search for something using the standalone application and once he finds what he is looking for, then he might say that he wants to graph the selected data using this web application. Now this part is not too difficult as the standalone app can simply POST the selected information to the web app and the web app can then plot the graph. However, the tricky part is that this web application has the capability to allow the user to select let's say a bar and then get additional info. on that bar. Now to get this additional info. the web app. must contact the standalone app and tell it what bar was selected to get the additional info.
so my concern is how does the web app contact the standalone app. or even KNOW about this web app. Also, RMI is pretty flaky and i would much rather use web services to accomplish it. If that is the only way to go that is.
Hope that helps.

Web Application and Serialization

Hi, i have a problem with a web application that is running on an Application server (BEA WebLogic 7.0). I have only the war file of the web application and i must know if in this war there is a class that is not serializable.
How can i find it ? Is there a tool that can help me to find not serializable classes ?
Thanks.
claudiozx2006

One way to do that is to decompile Java classes with Java decompiler and see which one doesn't implement Serializable interface. Here is a link to a good decompiler: http://www.kpdus.com/jad.html

Web application and desktop application?

Hi everyone,
I am new to this platform.I have a basic doubts that whats the difference between developing application in flex as a web application and desktop application from programming point of view?Can we use same code in both cases?
Please guide me....
Thanks

Hi and welcome,
The main difference between a web application and a desktop application is that web applications do not have access and can't manipulate your local system ( you can't open a window that displays all your local files, you can't delete, rename, edit local files and so on ). Obviously, this is just one difference, there are many more ( the best would be if you google for "web aplication vs desktop application" because the same rules apply for 99% if not all the platforms you can find out there ).
Desktop applications can have full control of your local system ( obviously, we have to take in consideration the platform we are using because since AIR is quite new in the desktop application field it is also more limited than other languages that have been used successfully to create desktop applications for years and year; like ce C# or C++ and so on ).
Another important difference is that desktop applications usually need to be installed in order to function where on the other hand, web applications can run in the browser without you having to install the aplication you are about to view on your computer ( in some cases, like of the Flash and Flex platforms, you only require a "special player" that can display the content you are trying to access... for Flash and Flex applications you need the Flash Player installed for your browser ).
So, before jumping into a project/platform you need to know your target. If you goal is to offer a fast, easy to access and no install required application to your users then you'll usually go with a web application. If your application needs to work with local files, maybe local databases, or it needs more control over the user's PC and so on, then you'll most likely go with a desktop application.
With kind regards,
Barna Biro

Web application and site collection not accessibe

I have created a web application and a site collection. But when I tried to access the site by browser on the server the page cannot be displayed or the server cannot be found. What should I configure? Please say by detailed steps.

I created a host header extranet.xxx.xx and alternate access mapping is ok. But still I'm not able to access the site by http://server name:port no. It gives The web page cannot be found or this web page can't be displayed.
Now when I try with Firefox with http://server name:port no, it gives
"Bad request - Invalid hostname
HTTP Error 400. The hostname is invalid."
More: if I go to Alternate Access Mappings > Add Internal URL:s > Save is grayed out.
You have two options,
Option 1 : Accessing the web application without any host header name and with the port no you have created. (ex: (http://server1:5500 )
Option 2. Accessing it with the host header name (ex:http://mywebapp.contoso.com) you have created for which you need to create a DNS and set an AAM accordingly in the corresponding zone.
For the option no 1. you need to have a host header in IIS which would be created by default while you create a web application and it should be like this unless you did nit change it. http (Type)---blank host name--All Unassigned in the IP section---and
the port no in which you have created.
PS : If you have one more IP address in the server, its good to set the same IP address which is set for server for the name resolution to happen properly.
If you have n't specified the hostheader while creating the web application, then you need to add it manually with the existing one which is there for option no 1. It should be added as below. http---Mywebapp.contoso.com--IP address in which you have created
the DNS and Port 80.
If AAM save is grayed out, check it from some other browser. Also Hostname invalid clearly implies that there is some problem with the name resolution. Check whether you could ping the webapplication from the server where you are trying to access it.
Veeramani.S

Web application and Scanner

Web application (ADF-application) and Scanner (device that optically scans images, printed text)
how to implement a scan from a web application and the ability to preview the scanned document (in the ADF-application) before uploading to the server.

Oracle has a product, which I worked on, for imaging. It may or may not be what you need.
http://www.oracle.com/technetwork/middleware/webcenter/content/index-090652.html

I want to remove the COnlineBank, OnlineBank and csample applications from my application and web server.

How can I safely do this on Solaris? I've tried "iasdeploy removeapp" and "iasdeploy removemodule" with no luck. I want to clear all of this demo stuff out to make both the web and app server look more production like.
Thanks
Eric

Eric,
these applications are applogics which are not controlled by the
iasdeploy tool. Unfortunately, there is no tool available to remove
these applications for you. What you can do is to manually remove all
their entries, but be careful if you do that. If you remove the wrong
keys you might break your ias installation, so be warned and make sure
you backup the whole ias registry before attempting to remove anything.
Eric Coleman wrote:
>
I want to remove the COnlineBank, OnlineBank and csample applications
from my application and web server.
How can I safely do this on Solaris? I've tried "iasdeploy removeapp"
and "iasdeploy removemodule" with no luck. I want to clear all of
this demo stuff out to make both the web and app server look more
production like.
Thanks
Eric
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!--
Han-Dat Luc ([email protected])
Senior Consultant
SUN Professional Services (iPlanet)
o .
o .
O _ ____ _ _
(_) _ \| | __ _ _ __ ___| |_ TM
| | |_) | |/ _` | '_ \ / _ \ __|
| | __/| | (_| | | | | __/ |_
|_|_| |_|\__,_|_| |_|\___|\__|
e-commerce solutions
Sun Microsystems Australia Pty Ltd

Can anyone help me know the difference b/w application and web server?

i tried reading about application and web servers. it appears to me to be the same. please do help me to differentiate. Thanks :-)

An application server hosts business logic components for an application. A web server is an application which accepts HTTP requests.
An application server may come packaged with a web server.
A web server is a very simple process. It's HTTP daemon process that listens for incoming requests over HTTP protocol on a specified port usually, 80. For simple, static web pages the web server has the built in logic to serve them but for a complex operation(say read from database and display some records), it routes the URL to a component like the servlet engine....
An application server is a much broader term. For example the servlet may need to invoke certain business logic components like beans or activex dlls. The server that hosts these components is the application server.
Hope you are clear now.

Single Sign on using SAML between JWS application and Web Application

Hi,
We have two applications one is swing based Java Web Start application and other is a normal web application. We are trying to enable single sign on between both the applications. Can SAML be used to enable single sign on? If yes, can some one let us know how to do this?
Thanks,
Rama

Thanks. But it is based on two WEB applications deployed on two different weblogic domains. What I am looking for is one application which is launched using Java Web Start(JNLP) and other a web application. The Java Web Start application uses its proprietary authentication implementation and the web application used DefaultAuthenticator of weblogic. Hope this detail will help you to answer my question better. I should have given this information earlier.
Thanks.
Rama

Requires a microsoft sharepoint foundation-compatible application and web browser

SharePoint 2010 version 14.0.7102.5000.
Clients are Windows 7 SP1, Browser is IE 10.0.9200.17296
Problem is the well known famous message 'requires a microsoft sharepoint foundation-compatible application and web browser' when the user chooses the button New Document.
Why this behaviour for this user is different then all the threads and blogs I read about this message is because of the following: I am logged on using my Windows account on my computer (VDI so I have the same computer as the user experiencing the
message) and don't have this problem. When the concerning user uses my logged on computer under my account and only logs in with his credentials within SharePoint (sign in as Different User) then the problem occures. I performed the same actions on the same
library as the concerning user.
So ruled out are:
- Browser version
- Office version
- windows User Profile
- x86 vs x64
- MS Foundation Support installation
- add on SharePoint OpenDocuments Class
Please help me out.

Do you have different versions of Office or SharePoint Designer or any Office product installed?
You can try repairing office installation in that particular user machine and see what happens.
Thanks.
Sorry to say but software versions can be ruled out as I mentioned the user have the same problem when using
my logged on account in Windows on my computer. Only in the browser the user is logging in with his credentials. I don't have this problem when using this Document Library.

Applications and multilanguage

Similar Messages

Maybe you are looking for