Applications Management Pack 3.0 now available
E-Business Suite Applications Technology Group recently released a new version of the Application Management Pack (AMP).
Application Management Pack extends Enterprise Manager Grid Control to monitor and managed E-Business Suite components. Notable new features in Version 3.0 are:
Advanced Discovery: allows you to monitor and manage E-Business Suite systems running advanced topologies such as Real Application Clusters (RAC)
EBS Administration: provides a user interface to start or stop E-Business Suite components individually or the E-Business Suite as a whole
Hot cloning for Oracle E-Business Suite Release 12: Automates cloning of an Oracle E-Business Suite Release 12 system in hot mode, without shutting down the database.
RAC cloning for Oracle E-Business Suite Release 12: Enables cloning of Oracle E-Business Suite Release 12 databases running Real Application Clusters to another RAC or single-node (non-RAC) environment.
Licencing
Application Management Pack for Oracle E-Business Suite is a licensed product.
Downloads
The Application Management Pack and Application Change Management Pack are available as a single install using Oracle Universal Installer. They can be downloaded via:
[Application Management Pack and Application Change Management Pack for Oracle E-Business Suite Version 3.0 (Patch 8333939)|http://updates.oracle.com/ARULink/PatchSearch/process_form?bug=8333939#uage=0&process=Submit]
References
[Getting Started with Oracle Application Management Pack and Application Change Management Pack for Oracle E-Business Suite Version 3.0 (Metalink Note 812315.1)|https://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=812315.1]
[Oracle Enterprise Manager Application Change Management Pack for Oracle E-Business Suite (PDF, 260K)|http://www.oracle.com/technology/products/oem/pdf/ds_appl_chg_mgmt.pdf]
[Application Management Pack for Oracle E-Business Suite Data Sheet (PDF, 80K)|http://blogs.oracle.com/stevenChan/2009/06/www.oracle.com/technology/products/oem/pdf/apps_mgmt_ebiz.pdf]
Related Articles
[Comparing OEM Data Masking and AMP Data Scrambling Features|http://blogs.oracle.com/stevenChan/2008/04/comparing_oem_data_masking_and.html]
[Certified Oracle RAC Scenarios for Oracle E-Business Suite Cloning|http://blogs.oracle.com/stevenChan/2009/03/certified_rac_scenarios_for_ebs_cloning.html]
There are many enhancements in Setup Manager compared to iSetup. To list a few:
1) ability to create a project which groups extracts, loads and reports and orchestrate these tasks as per your requirements.
2) Ability to migrate data between point releases of EBS. Example, you can move data from 12.0.4 to 12.0.6 or 12.1.1.
3) Ability to share the projects with other users.
4) You can do extraction and loading to multiple instances in a single execution.
Similar Messages
-
Applications Change Management Pack 3.0 now available
E-Business Suite Applications Technology Group recently released a new product, the Application Change Management Pack (ACMP), and a new version of their Application Management Pack (AMP).
The Application Change Management Pack is noteworthy because it provides three new tools for automating updates to multiple E-Business Suite instances:
Customization Manager automates the packaging of your customizations into AD-compliant packages that can be deployed across multiple E-Business Suite instances. Before packaging, the Customization Manager validates your customizations against Oracle's software coding best practices.
Patch Manager integrates with Oracle Metalink and automatically downloads and deploys different types of patches across multiple (single or multi-node) E-Business Suite instances.
Setup Manager helps manage functional setups that need to be duplicated across multiple E-Business Suite instances.
Licencing
Application Management Pack for Oracle E-Business Suite and Application Change Management Pack for Oracle E-Business Suite are separately licensed products. Application Management Pack for Oracle E-Business Suite Version 3.0 is a mandatory prerequisite for Application Change Management Pack for Oracle E-Business Suite Version 3.0 and should be licenced separately.
Downloads
The Application Management Pack and Application Change Management Pack are available as a single install using Oracle Universal Installer. They can be downloaded via:
[Application Management Pack and Application Change Management Pack for Oracle E-Business Suite Version 3.0 (Patch 8333939)|http://updates.oracle.com/ARULink/PatchSearch/process_form?bug=8333939#uage=0&process=Submit]
References
[Getting Started with Oracle Application Management Pack and Application Change Management Pack for Oracle E-Business Suite Version 3.0 (Metalink Note 812315.1)|https://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=812315.1]
[Oracle Enterprise Manager Application Change Management Pack for Oracle E-Business Suite (PDF, 260K)|http://www.oracle.com/technology/products/oem/pdf/ds_appl_chg_mgmt.pdf]
[Application Management Pack for Oracle E-Business Suite Data Sheet (PDF, 80K)|http://blogs.oracle.com/stevenChan/2009/06/www.oracle.com/technology/products/oem/pdf/apps_mgmt_ebiz.pdf]
Related Articles
[Comparing OEM Data Masking and AMP Data Scrambling Features|http://blogs.oracle.com/stevenChan/2008/04/comparing_oem_data_masking_and.html]
[Certified Oracle RAC Scenarios for Oracle E-Business Suite Cloning|http://blogs.oracle.com/stevenChan/2009/03/certified_rac_scenarios_for_ebs_cloning.html]There are many enhancements in Setup Manager compared to iSetup. To list a few:
1) ability to create a project which groups extracts, loads and reports and orchestrate these tasks as per your requirements.
2) Ability to migrate data between point releases of EBS. Example, you can move data from 12.0.4 to 12.0.6 or 12.1.1.
3) Ability to share the projects with other users.
4) You can do extraction and loading to multiple instances in a single execution. -
Oracle Application Management Pack for Siebel 10gR4 is GA
Oracle Application Management Pack for Siebel 10gR4 is now generally available.
Go to this OTN page if you want more information about the product.
http://www.oracle.com/technology/products/oem/prod_focus/app_mgmt.html
You may also download it from OTN to try it out as part of Enterprise Manager 10gR4. We will be demonstrating it at booths D8 and J7 at the Oracle Demoground at Moscone South Hall, at session S291922 at Moscone West L2-2001 on Monday, 11/12 from 3:15 to 4:15 p.m., and at the Siebel Pack Hands-on Lab (S294089) at Marriott Hotel Golden Gate Room B1 on Thursday, 11/15 from 11:30 a.m.-12:30 p.m.
The Siebel Pack is designed to be a complete and integrated management tool for Siebel. Using this management pack, you may get proactive alerts on impending problems on the application, examine run-time statistics to troubleshoot and tune performance, compare configurations across different environments, keep track of configuration changes, proactively enforce configuration policies in order to avoid configuration related problems, monitor and report on service level delivered by the application and performance diagnostics of user and server performance. The pack may be used with other Oracle Enterprise Manager management packs and plug-in’s to achieve end-to-end management of the entire application environment, including both Oracle and non-Oracle databases, operating systems, storage and network devices.
The 10gR4 release of this pack adds integrated Siebel Transaction Diagnostic support using data captured via Siebel Application Response Measurement (SARM) framework. With this tool, you may:
- Analyze request processing for individual user requests
- Analyze CPU and memory consumption of processing requests for different Siebel Server Components
- Visualize SARM metric data graphically
- Compare performance profiles over time
- Create performance reports and share them with your co-worker for collaborative performance diagnostics
The 10gR4 version of this Siebel Transaction Diagnostic tool also adds support for Siebel 7.7 and 7.8 in addition to being compatible with Siebel 8.0. It is fully integrated with Oracle Enterprise Manager, which eliminates the need for separate install and user maintenance, and it runs on all operating system platforms that Oracle Enterprise Manager supports.Working with the Oracle Enterprise Manager group to integrate closely with their monitoring solutions has been one of the most important advantages of joining the Oracle team. As our customers have started to use CRM more deeply as part of their business processes, CRM has quickly become Mission Critical, with 24/7 uptime requirements. Furthermore, as CRM becomes further integrated into the enterprise, knowing the status and health of the connections to multiple backend systems becomes evermore crucial.
Through our partnership with the Oracle Enterprise Manager, we aim to support true Enterprise-class CRM. We are the only solution out there with over six million live users, and we are leveraging the knowledge gained from those customers in our Enterprise Manager integration. With the real-time monitoring and diagnosis that Oracle Enterprise Manager provides, we simplify the process of managing sophisticated CRM implementations which span organizations and systems. If you have a Siebel implementation with four servers or more, or with integrations to several systems, you owe it to yourself to check out Oracle Enterprise Manager. -
Application Management Packs for OEM11g?
Anybody heard anything about the porting of management packs? PeopleSoft specifically is my concern..
I have to say that I'm disappointed that they list the old docs in the OEM11g docs, when it doesn't work.
http://download.oracle.com/docs/cd/E11857_01/nav/management.htmThe Oracle EBS Application Management Packs for OEM11g is not available. The development team is working on it , no ETA.
Regards,
Phani.K -
Does Application Management Pack (for E-Business) need a separate license?
Hi, I am licensed for Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0.
Now I want to add Application Management Pack for E-Business R11i and R12. Do I need to purchase a new license?
From my existing installation there is a link About OEM -> ... License Information; I don't see any entry for E-Business Suite management.
Thanks,Yes, you need to license Application Management Suite for E-Business Suite to cover the EBS management functionality. In both EM 11g and EM 12c, you need to download the plug-in for EBS. In the case of EM 12c, you can simply use the self-update feature to quickly get the EBS plug-in. For 11g, you will have to get it via e-Delivery.
Here is the OTN home page for packaged application management where you can find details and self-running demos of the EBS management functionality:
http://www.oracle.com/technetwork/oem/app-mgmt/index.html -
Installation of Application Management Pack 3 Failed
Hi All,
Please help me.
I've experienced an error while installing the Application Management Pack 3 on Linux Machine (OS: Oracle Enterprise Linux 5.3 32-bit) with EM Grid Control 10g Release 5. I want to install the Grid Control Plug-in Oracle E-Business Suite Management Pack 3 to manage our EBS Oracle Apps R12, but it was failed due to error. Below was the logs for error:
Log: /u01/app/oraInventory/logs/installActions2010-07-06_03-00-11PM.log
RepManager was not able to run successfully.
/applications/em/em/WEB-INF/lib/myjar.jar:/u01/app/oracle/OracleHomes/oms10g/sysman/jlib/emCfg.jar:/u01/a
pp/oracle/OracleHomes/oms10g/jlib/ojmisc.jar:/u01/app/oracle/OracleHomes/oms10g/sysman/jlib/emUpgrade.jar
:/u01/app/oracle/OracleHomes/oms10g/sysman/jlib/emagentSDK.jar oracle.apps.oms_extn.util.EBSOUIUtil RepMa
nager /u01/app/oracle/OracleHomes/oms10g ${s_encrreposDBAPwd} (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOC
OL=TCP)(HOST=oem.kccmalls.com)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep.kccmalls.com)))
/u01/app/oracle/OracleHomes/oms10g/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST
=(ADDRESS=(PROTOCOL=TCP)(HOST=oem.kccmalls.com)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep.kccmalls.co
m))) -sys_password **** -repos_user sysman -repos_password ******** -action upgrade -verbose
RepManager was not able to run successfully.
Please see /u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/appsemca-2010-7-6_15-558.out for more details.
Execution of the plugin was aborted
INFO: Configuration assistant "APPS plugin Repository Upgrade Assistant" was canceled.
INFO: The "/u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/configToolFailedCommands" script contains all c
ommands that failed, were skipped or were cancelled. This file may be used to run these configuration ass
istants outside of OUI. Note that you may have to update this script with passwords (if any) before execu
ting the same.
INFO: Created a new file /u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/configToolFailedCommands
INFO: Since the option is to overwrite the existing /u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/config
ToolFailedCommands file, backing it up
INFO: The backed up file name is /u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/configToolFailedCommands.
bak
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry
the configuration assistants at this time. Not successfully running any "Recommended" assistants means yo
ur system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failu
res.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
Log: /u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/appsemca-2010-7-6_15-558.out
Getting temporary tablespace from database...
Found temporary tablespace: TEMP
Environment :
ORACLE HOME = /u01/app/oracle/OracleHomes/oms10g
REPOSITORY HOME = /u01/app/oracle/OracleHomes/oms10g
SQLPLUS = /u01/app/oracle/OracleHomes/oms10g/bin/sqlplus
SQL SCRIPT ROOT = /u01/app/oracle/OracleHomes/oms10g/sysman/admin/emdrep/sql
EXPORT = /u01/app/oracle/OracleHomes/oms10g/bin/exp
IMPORT = /u01/app/oracle/OracleHomes/oms10g/bin/imp
LOADJAVA = /u01/app/oracle/OracleHomes/oms10g/bin/loadjava
JAR FILE ROOT = /u01/app/oracle/OracleHomes/oms10g/sysman/admin/emdrep/lib
JOB TYPES ROOT = /u01/app/oracle/OracleHomes/oms10g/sysman/admin/emdrep/bin
Arguments :
Connect String = (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=oem.kccmalls.com)(PORT=152
1)))(CONNECT_DATA=(SERVICE_NAME=emrep.kccmalls.com)))
Action = upgrade
Repos User = SYSMAN
Default tablespace = MGMT_TABLESPACE
Default Data file = mgmt.dbf
Dflt Dfile Init size = 20m
Dflt Dfile Ext size = 20m
ECM tablespace = MGMT_ECM_DEPOT_TS
ECM Data file = mgmt_ecm_depot1.dbf
ECM Dfile Init size = 100m
ECM Dfile Ext size = 100m
ECM CSA tablespace = MGMT_TABLESPACE
ECM CSA Data file = mgmt_ecm_csa1.dbf
ECM CSA Dfile Init size = 100m
ECM CSA Dfile Ext size = 100m
TEMP tablespace = TEMP
Create options = 3
Verbose output = 1
Output File = /u01/app/oracle/OracleHomes/oms10g/sysman/log/emrepmgr.log.10108
Repos creation mode = CENTRAL
MyOracleSupport user name = NOTAVAILABLE_
MyOracleSupport URL = http://updates.oracle.com
Export Directory = /u01/app/oracle/OracleHomes/oms10g/sysman/log
Import Directory = /u01/app/oracle/OracleHomes/oms10g/sysman/log
Path Separator = :
Checking SYS Credentials ... rem error switch
ECM CSA Dfile Init size = 100m
ECM CSA Dfile Ext size = 100m
TEMP tablespace = TEMP
Create options = 3
Verbose output = 1
Output File = /u01/app/oracle/OracleHomes/oms10g/sysman/log/emrepmgr.log.10108
Repos creation mode = CENTRAL
MyOracleSupport user name = NOTAVAILABLE_
MyOracleSupport URL = http://updates.oracle.com
Export Directory = /u01/app/oracle/OracleHomes/oms10g/sysman/log
Import Directory = /u01/app/oracle/OracleHomes/oms10g/sysman/log
Path Separator = :
Checking SYS Credentials ... rem error switch
Return code = 0.OK.
rem error switch
Upgrading the repository..
Checking for Repos User ... Return code = 0.Exists.
Verifying Audit Master Table --> Passed
Verifying Time Coefficient Table --> Didn't Pass
Verifying SYSMAN Referential Integrity --> Passed
Verifying SYSMAN Trigger Check --> Passed
Verifying Max Enabled Roles --> Passed
Verifying Global User Context --> Passed
Verifying Exempt Access Policy --> Passed
Verifying SYSMAN Queue Tables Check --> Passed
Verifying VPD Basic Policy Function --> Passed
Verifying VPD Valid Policy Function --> Passed
------------- SANITY VIOLATION ----------------
Verification has not passed for schema upgrade
to ensure basic sanity conditions of the SYSMAN schema.
There are the following violations:
Schema Sanity Violation: Time Coefficient Table is expected 1 row but contains 0 row
Please contact Oracle Support for schema validations
before attempting to perform schema upgrade
Any help much appreciated.
Regards,
CyrusTake a look at: APPS Plugin Repository Upgrade fails with "Schema Sanity Violation: Time Coefficient Table is expected 1 row but contains 0 row" [ID 883703.1]
on support.oracle.com
https://support.oracle.com/CSP/ui/flash.html#tab=KBHome%28page=KBHome&id=%28%29%29,%28page=KBNavigator&id=%28bmDocTitle=APPS%20Plugin%20Repository%20Upgrade%20fails%20with%20%22Schema%20Sanity%20Violation:%20Time%20Coefficient%20Table%20is%20expected%201%20row%20but%20contains%200%20row%22&bmDocDsrc=KB&bmDocType=PROBLEM&bmDocID=883703.1&viewingMode=1143&from=BOOKMARK%29%29
Regards
Rob
http://oemgc.wordpress.com -
Xcelsius Enterprise 2008 Service Pack 2 is now available
Hello,
Xcelsius Enterprise 2008 Service Pack 2 is now available and posted on the SAP BusinessObjects download support site. You can access it here: SAP Crystal Solutions Downloads
It applies to Xcelsius Engage, Engage Server and Enterprise. Not Xcelsius Present.
There will be another announcement for Xcelsius Present 2008 Service Pack 2 when it is released...
Please make sure you download the zip file and extract it to your hard drive before attempting to install.
The Service Pack is a full install so you do not need to have a previous version of Xcelsius 2008 installed.
When you are upgrading a previous Xcelsius 2008 installation you need access to your original Xcelsius 2008 SP1 installation files from the original location otherwise you will be prompted to locate Xcelsius.msi from the original Xcelsius 2008 SP1 installation (in the SP1 installation packages folder).
After installing in Xcelsius Help > About your Xcelsius version number should be 5.2.0.0. (Build 12,2,0,608)
The documentation is available online here: http://help.sap.com/content/bobj/bobj/index.htm and includes:
u2022 What's Fixed in Xcelsius 2008 Service Pack 2
u2022 What's New in Xcelsius 2008 Service Pack 2
u2022 Xcelsius 2008 Installation Guide
u2022 Xcelsius 2008 SP2 Release Notes
u2022 Xcelsius 2008 SP2 User Guide
u2022 Xcelsius 2008 SP2 Supported Platforms is available online here: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0ebdbe6-108f-2c10-9daf-a8b5e051100c&overridelayout=true
Regards
Matt
Please also see the Xcelsius Product Portal: https://www.sdn.sap.com/irj/sdn/crystalreports-xcelsius
Before posting on this forum please refer to the Xcelsius Forum Rules of Engagement: Welcome to the Xcelsius forum & Rules of Engagement
Happy posting!
The SAP Xcelsius Community TeamNice to hear.
Maybe my performance problems with the Buble chart are solved.
SAP help desk promised. -
Oracle Grid Control and Oracle Application Management Pack for Siebel
I am trying to get the Oracle Grid Control Software to work with the Siebel Application Management Pack so that I can effectively monitor Siebel. The client I am at does not have a budget for proper monitoring solution therefore, I have chosen the free alternative. Anyway, the Oracle 10G Agent is running on all the windows Siebel Servers and all of the Siebel Servers appear within the Oracle Grid Control management tool. At this time I am more interested in monitoring the Siebel metrics versus the windows metrics.. I have added Siebel as a Target Subtab within Oracle Grid Control. I have also successfully run through the Oracle Agent 10G SiebelClassPathfix.bat command on each Siebel Windows Server. What I am not able to do is add a Siebel Enterprise through the Oracle Grid Control Manager Software. When I attempt to add a Siebel Enterprise I receive the following error message. Any suggestions would be beneficial.
An error occured while adding Siebel Enterprise.
Credentials - Missing Credentials for host halcrmtgw01.dinghy.hal.testPlease log a service request with tech support so that we can track this inquiry. On the service request, capture a screenshot of the page where you defined the host preferred credentials, and tell us the names of your servers.
Btw, I take that you are stuck in the step in which you:
- Click the "Add Enterprise" button to add the enterprise
- Fill in the 7 parameters
- Click Ok to start the discovery process
Which release of Siebel and Enterprise Manager are you using?
Chung -
Any patch for OEM 10.2.0.5 for OARCLE application management pack??
We already have ORACLE Grid Control 10.2.0.5 (X86 version) on Linux server. We plan to install ORACLE Application Management Pack 3.0 into Grid Control 10.2.0.5.
I heard there have patch need apply to Grid Control 10.20.05 before install Application management pack into it. Anyone know which patch?
Thanks.I follow document 812315.1 and OAM installation gudie to install OAM 3.0 plug-in to OEM 10.2.0.5. Everything look fine on OEM server. I also follow 812315.1 and tried to install patchs on EBS R12.1 application server:
3. Apply the following patches for Release 12.1 or higher
Apply AD Patch 8414326: R12.AD.B:1OFF:12.1: INTEROPERABILITY PATCH FOR AMP-ACP 3.0
Apply Interoperability Patch 7616161: R12.OAM.B 12.1 INTEROPERABILITY PATCH FOR AMP 3.0
On R12.1 application server, I installed patch 8414326 and without problem. But when I tried to install patch 7616161 and I got error:
AutoPatch error:
This patch is not compatible with your current codelines.
This patch is compatible with: entity 'oam' - codeline 'R12.OAM.A'.
Your current on-site codeline for the entity 'oam' is: 'R12.OAM.B'.
You should not apply this patch.
Apply an equivalent patch that is compatible with your
current codelines instead.
any ideal???? -
Note: 982302.1 -Oracle Application Management Pack
Hi dear,
I am just confused with lots of docs :( I want to use the best one.
Is note 982302.1 the same as 568069.1
referred to as
>Oracle E-Business Suite Release Management Packs 3.1 (AMP-ACP 3.1) (Patch 8333939)
also referred to as
> AMP ( Application Management Plugin) installed for monitoring E-Business applications.This has to be applied on OMS and agents to monitor applications.
Thanks a lot,
Ms KHi Ms K,
I would start with note 982302.1 and use 568069.1 if you have discovery problems. The latter note is a little old, so may not still be applicable for the latest release of the Applications Management Pack.
I also recommend searching for "AMP 3.1" on My Oracle Support to see what additional issues are present. If you are using 11gR1 or 11gR2 database with EBS, I recommend installing 11gR1 Grid Control and wait for the 11g certified Applications Management Pack. I have not used AMP 3.1, but had problems with 2.0 and 3.0 keeping services showing "Up" in Grid Control 10.2.0.5. It would work for a few weeks then mostly show pending or down after that. I eventually lost interest in fighting with it as I was the primary user that looked at it anyway.
Regards,
-Michael -
Oracle Application Management Pack(AMP) for Oracle E-Business Suite
1. How to find the (already) installed OEM version ?
2. How to find if AMP is installed and what version ??
3. If not installed,Metalink Doc id to install and upgrade AMP to latest version ??
Hi,
I am new to EBS , please help me in these questions
Thanks in advance.Please see this thread for similar discussion -- Applications Management Pack for 11i
Thanks,
Hussein -
Oracle Application Management Pack
Hi,
We have R12 of EBS and asked to install Oracle Application Management Pack. I could see 394448.1 : Oracle Application Management Pack for Oracle E-Business Suite, Release 2.0 .
Do we need to reinstall OEM or simply applying patches as per metalink notes 394448.1?
Awaiting ur reply..Hi,
I applied appspack patch 6809246 and it's applied successfully. after this I looged in to oem url and checked to see if the instance has been added under Targets>Oracle Applications. It was not there. Do we need to add databse there?I tried to add instance name and it was asking for "Monitoring Schema Username, Monitoring Schema Password, Monitoring Applications Username, Monitoring Applications User Password "
From where we get those details and do we need to add database explicitly?
Regards -
Oracle Application Management Pack for Siebel
Does anyone on this board have any experience with the Oracle 10G Grid Control software and the Oracle Application Management Pack for Siebel. The installation of the Oracle Enterprise Manager Grid Control with the Siebel Management Pack has been successful on the Windows 2003 servers and we can view a list of the servers within Oracle's OEM tool. The problem I am facing is when I try to add a Siebel Enterprise. I receive the following error when I attempt to add a Siebel Enterprise.
An error occured while adding Siebel Enterprise.
Credentials - Missing Credentials for host <HOST_NAME>
All of the credentials have been added properly. Does anyone have any experience or success using this product? If so please reply with feedback.
.Please log a service request with tech support so that we can track this inquiry. On the service request, capture a screenshot of the page where you defined the host preferred credentials, and tell us the names of your servers.
Btw, I take that you are stuck in the step in which you:
- Click the "Add Enterprise" button to add the enterprise
- Fill in the 7 parameters
- Click Ok to start the discovery process
Which release of Siebel and Enterprise Manager are you using?
Chung -
Crystal Reports for Eclipse 2.0 - Service Pack 1 - is Now Available!
Service Pack 1 for Crystal Reports for Eclipse 2.0 is now available!
Readme file listing the fixes is here:
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4ev2_readme.pdf]
Kirby Leong in another post listed the download URLs, which I'll copy here:
CR4E Runtime Package
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/crjava-runtime_12.2.202.zip]
CR4E Manual Install Package
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e_2.0.1.zip]
CR4E All-In-One Package
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e-all-in-one-win_2.0.1.zip]
CR4E Language Packs
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e.nls1_2.0.1.zip]
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e.nls2_2.0.1.zip]
If you wish to use the Eclipse IDE Software Updater:
1. Start Eclipse 3.4.1 (Gemini) IDE.
2. Select Help -> Software Updates...
3. Select the "Available Software" tab.
4. Click the "Manage Sites..." button.
5. If you do not see the following URL listed:
http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/update_site/
then click "Add..." and add it.
6. Select the above URL in the "Available Software Sites", then click "OK".
7. The Available Software should now list the above URL. Open the node, and you should see "Crystal Reports for Eclipse".
8. Check all checkboxes for "Crystal Reports for Eclipse", and "Install..."
After successful update, you'll see version 2.0.1 listed in Help -> About Eclipse SDK and clicking on the "Crystal Reports for Eclipse" icon (blue swoosh with green diamond).
If you don't see that version listed, here's some troubleshooting tips:
Open a web browser, and Go to the following URL:
http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/update_site/site.xml
You should get back a XML file listed the current CR4E plugin and language packs versions. If you get an error instead, it may be because (1) you're in a locked down environment that won't let you access that site, or (2) the CR4E Update Site may be down for maintenance. If the former, you'll have to download the updates by some other means and upgrade manually.hello ....
my report is ''crystal report 11'' => "OLE DB" => "Add Command(select * from table) " .
code(JRC) : eclipse + crystal report for eclipse version 2 => "cr4e-all-in-one-win_2.0.1.zip"
<%@ page contentType="text/html; charset=UTF-8"
import="
com.crystaldecisions.report.web.viewer.CrystalReportViewer,
com.crystaldecisions.reports.sdk.ReportClientDocument,
com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase,
java.sql.Connection,
java.sql.DriverManager,
java.sql.ResultSet,
java.sql.SQLException,
java.sql.Statement" %>
<%
try {
String reportName = "report.rpt";
ReportClientDocument clientDoc = new ReportClientDocument();
clientDoc.open(reportName, 0);
String tableAlias = "Command";
clientDoc.getDatabaseController().setDataSource(
myResult("SELECT * FROM table"),
tableAlias,"resultsetTable");
CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
crystalReportPageViewer.setReportSource(clientDoc.getReportSource());
crystalReportPageViewer.processHttpRequest(
request,
response,
application,
null);
} catch (ReportSDKExceptionBase e) {
e.printStackTrace();
out.println(e);
%>
I simplified the code, *myResult("SELECT * FROM table") * is absolutely no problem ,
and this code is absolutely no problem in the "crystal report for eclipse "version 1
but in version 2 run error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: 無法預期的資料庫連線器錯誤---- Error code:-2147467259 Error code name:failed
Please help me and tell me why.... -
Xcelsius 2008 Service Pack 1, Fix Pack 1 is now available
Hello,
FP1 is now available and posted on the Business Objects download support site. You can access it here: <a href="https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm">https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm</a>
It applies to Engage, Engage Server and Enterprise.
Fix Pack 1.1 Release Notes are now available online for download at [http://help.sap.com/content/bobj/overview/index.htm]
After the upgrade in Help > About your Xcelsius version number should be 5.1.1.0. Build 12,1,1,344.
You must already have SP1 installed before installing FP1. Customers buying Xcelsius after August would already have SP1. To confirm which version you have click on help -> about. The Build Number should be: 12,1,0,247.
Take care,
Saskia
Welcome to the Xcelsius Forum!
Please also see the [Xcelsius Community|https://www.sdn.sap.com/irj/sdn/crystalreports-xcelsius] and [SAP Wiki FAQ|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/wiki+faq] for extra help.
Use the search to find answers before you post.
More detailed [rules of engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement], can be found on the SAP Wiki.
Happy posting!
The Community Team
Edited by: Andy Brathwaite on Dec 17, 2008 10:12 PMI have installed Xcelsius 2008with SP1 and the FP1.
The problem I have is with all the versions.
If I open Xcelsius and click on File -> Manage Add-ons.., I get the following error message:
Microsoft Visual C++ Runtime Library
Runtime Error
Program C:\Program Files\Business Objects\Xcelsius\Xcelsius.exe
The application has requested the RunTime to terminate in an unusual way.
Please Contact the application support team for more information. OK.
Now after I click on OK, the computer completely freezes up and has to be restarted - with a hardware reset. Power Off and Back On.
I have the About screen with Xcelsius Version 5.0.0.99
Build Number 12,1,0,247
This occurs on a HP tablet AMD Turion X2 Dual-Core Mobile RM-72, Windows Vista Ultimate 32-bit SP1.
I have uninstalled and reinstalled the software 3 times, and still no luck.
The PC is less than a week old, and I am just configuring it and trying to ensure the software is functioning correctly.
During the restart of the PC, after I have requested restart windows normally, I get the message that flashes up sometimes, that states
441/441 / registry (or very similiar - it happens very fast)
Maybe you are looking for
-
Search help multiple values selection problem
Hello Friends, I am using FM f4_if_int_table_value_request FM to display multiple values on selection screen in AT-selection-screen on value request event. Multiple values are getting displayed perfectly . Then after that I am using DYNP_VALUES_UPDAT
-
How to open local file link in IE ?
I know, this question is not APEX-related per se, but I was not able to google the fix to this problem. In my application, users can open a file open dialog and retrieve a complete file path that is later stored in the DB. Of course, Firefox's javasc
-
for instance if i am playing tune #20 and i deselect #21, #21 will still be played. I need to deselect #21 before ITunes has started to play #20. this is a strange behaviour. I am using ITUNES as a DJ again after 2 years off and i don't remember it d
-
I need to create a maze. Is there any classes I can Import? Thanxs
-
I can't update my apps in the app store because my daughter is logged in. How can I change the apple ID to log in?