Apply password period expire policy to resource accounts

Hi! In IDM 7.1 I know can apply Password Period Expire Policy to Lighthouse account. It's simple and It works so well.
But, I ' d like to know how can I apply a password period expire policy to resource accounts to synchronize as Lighthouse as resources accounts (i.e. LDAP accounts, etc.).
I knew in previous versions of IDM wasn't possible.
Thanks.

Figures the solution form my own Q....
I had pass through configured with LDAP to a login module group - which had the following as the order.
1. LDAP
2. IDM
As LDAP resource adaptor does not support expiry, we have to look for the IdM Expiry. so i reversed the order so that IdM takes precedence in resolving the value of 'loginwarning" on the end user dashboard.
Anyways in my environment, All password resets are handled from IdM so the Pass through wont hurt.

Similar Messages

Be careful of "Prompt user to change password before expiration" policy -- it's counting the days wrong!!

After several tests, I'm pretty sure that the policy "Interactive logon: Prompt user to change password before expiration" is counting the wrong days. (Note: this policy is in Windows Settings > Security Settings > Local Policies > Security
Options) So I think I should post this in the forum in the hope that it could be helpful to others in the same case as me, esp if the policy is pushed out as a domain-wide policy.
First, the context of the test, ie domain-wide policy settings:
1. Password minimum age = 2 days
2. Password maximum age = 4 days
3. Prompt user to change password before expiration = 2 days
If everything is going fine, users will be asked to change password when it is changeable (ie it has reached the minimum age). However, it turns out that users are prompted BEFORE they can change password. Look at the image below that I got in
Win7:
(In WinXP, we have similar prompt when user has just logged in)
Look at the clock: it's 13:16 (04/12/2013). Then look at the DOS window in which I ran the "net user /domain" command and read the line "Password expires": it's shown
06/12/2013 18:09:04.
A little math would tell me that if users are prompted to change password *2 days* before expiration, the dialog will appear
ONLY AFTER 04/12/2013 18:09:04. But since the prompt is shown at 13:16 (ie well before 18:09), that mean the "prompt user...." policy makes mistakes in calculating the moment to show the prompt.
In other words, if we have the policy set like this:
Prompt user to change password before expiration =
N days
The prompt will actually appear from N+1 days before expiration.
I would consider this as a bug, but I also suppose it's hard to make Microsoft fix it. So that's why I make this post to warn others. In my case, I have received several calls from users complaining that they were prompted to change password
but their new passwords were always refused and they had no idea what went wrong. And it took me a lot of effort to sort out what really went wrong. And in order to work around this stupid bug, I have to change the "Prompt user...." policy
to N-1 days (before expiration) instead of N days previously.
Hope this help

Hi,
Based on my research, you are right that the prompt policy is implemented by date, which is by design.
“Set
Interactive logon: Prompt user to change password before expiration to 5 days. When their password expiration
date is 5 or fewer days away, users will see a dialog box each time they log on to the domain”, I quoted this sentence from the article below:
Interactive logon: Prompt user to change password before expiration
http://technet.microsoft.com/en-us/library/jj852243.aspx
The problem is consistency! For Minimum/Maximum password age properties, they are also defined for
days as well. But for them, days are exact days, ie a
multiple of exactly 24 hours. There is an "Explain" tab for every parameter, but even if you read them through, you can't tell if day means strict multiple of 24 hours or loose definition of days. I'll leave the exercise to you to read
them if you like and spare me the article from your KB library.
As for the password minimum age part, what I mean is that is why users can’t not change their password within 2 days when the prompt appears before the changeable time.
Anyway, I agree with you that we need to be careful when we configure the password policy because the Prompt policy is not doing calculation by hours.
Miss, the 2 days is just a TEST EXAMPLE. Let's say it's
N days if you was unable to understand. I wouldn't change N days to N-1 days because of this stupid GUI bug. As I said earlier and let me repeat it once more,
Minimum password age = N days is a security policy and it is more important than the user prompt and no security officer with sane mind will change this.

Turn off Password never expires on local administrator account

Hello Experts,
we have some servers where the Password Never Expires flag is checked , and I am trying to find out a scripting way to uncheck these option so that password expires on the Local administrator account(Not AD Account).
There are -bor 0x10000 (https://social.technet.microsoft.com/Forums/en-US/e4e96a5e-3b28-4673-8c61-d4abdf8f2426/win-7-setting-the-option-password-never-expires-for-a-specific-local-user?forum=winserverpowershell)
which turn this option ON.
But , what is need is exact opposite. I want to turn off the option so that , the password gets expired.
Thanks,
-Prashant Girennavar.
MCSA|MCITP SA|Microsoft Exchange 2003 Blog - http://prashant1987.wordpress.com Disclaimer: This posting is provided AS-IS with no warranties/guarantees and confers no rights.

PowerShell example:
$ADS_UF_DONT_EXPIRE_PASSWD = 0x10000
$admin = [ADSI] "WinNT://$Env:USERDOMAIN/$Env:COMPUTERNAME/Administrator,User"
$flags = $admin.UserFlags[0]
if ( ($flags -band $ADS_UF_DONT_EXPIRE_PASSWD) -ne 0 ) {
$flags = $flags -band (-bnot $ADS_UF_DONT_EXPIRE_PASSWD)
$admin.UserFlags = $flags
$admin.SetInfo()
Retrieve UserFlags (bit array), and if the bit is set, clear it. Reassign UserFlags with cleared bit, and write the change.
-- Bill Stewart [Bill_Stewart]

Linking resource accounts to access policy from a database

As part of the seeding process, we assign roles to the users and then run the recon to assign resources to the user. We have an access policy which is supposed to assign AD resource when a User has an Employee role. After we seed all the existing users, we enable to policy to assign AD for the new users, but since we recon the user's instead of access policy, it doesn't link the access policy to resource account.
How can I link those two in the database so next time when someone is removed from the Employee role, it will also remove the AD account. I tried setting the pol_key attribute in UD_ADUSER with the id of the policy found in table pol but that didn't help.
Thanks

As part of the seeding process, we assign roles to the users and then run the recon to assign resources to the user. We have an access policy which is supposed to assign AD resource when a User has an Employee role. After we seed all the existing users, we enable to policy to assign AD for the new users, but since we recon the user's instead of access policy, it doesn't link the access policy to resource account.
How can I link those two in the database so next time when someone is removed from the Employee role, it will also remove the AD account. I tried setting the pol_key attribute in UD_ADUSER with the id of the policy found in table pol but that didn't help.
Thanks

Set resource accounts to a calculated password

We have a requirement to change, post user create (but still in the create user workflow), the passwords of two resource accounts to a calculated value for technical staff to so some setup before a user begins to use these resources
Any ideas how I can do this?

hi, i fix my code and working good now.
// CALCULO TRASLADOS Y FLETES CAMIONES
*XDIM_MEMBERSET CATEGORY = %CATEGORY_SET%
*XDIM_MEMBERSET CENTRODECOSTO = %CENTRODECOSTO_SET%
*XDIM_ADDMEMBERSET CENTRODECOSTO =NA
*SELECT(%ZCEBE%, "[ID]", CEBE,[ID]=%CEBE_SET%)
*XDIM_MEMBERSET CEBE = %ZCEBE%, NA
*XDIM_MEMBERSET CUENTA = 312310000,NA
*XDIM_MEMBERSET MODELO AS %ZMOD1% = BAS(f_pesados)
*XDIM_MEMBERSET MODELO AS %ZMOD2% = BAS(m_medianos)
*XDIM_MEMBERSET MODELO AS %ZMOD3% = BAS(m_pesados_b)
*XDIM_MEMBERSET MODELO AS %ZMOD4% = BAS(m_pesados_a)
*XDIM_MEMBERSET MODELO AS %ZMOD5% = BAS(c_western_star)
*XDIM_MEMBERSET MODELO = NA, %ZMOD1%, %ZMOD2%, %ZMOD3%, %ZMOD4%, %ZMOD5%
*XDIM_MEMBERSET MONEDA_PPTO = USD,NA,CLP
*XDIM_MEMBERSET PARAMETRO = NA,ZPTF01,ZACB002
*XDIM_MEMBERSET RPTCURRENCY = LC
*XDIM_MEMBERSET SOCIEDAD = %SOCIEDAD_SET%
*SELECT(%ZSUC%, "[ID]", SUCURSALES,[ID]=%SUCURSALES_SET%)
*XDIM_MEMBERSET SUCURSALES = %ZSUC%, NA
*XDIM_MEMBERSET TIME = BAS(%YEAR%.TOTAL)
*SELECT(%ZTVTA%, "[ID]",TIPO_VTA,[TIPO]=%TIPO_VTA_SET%)
*XDIM_MEMBERSET TIPO_VTA = %ZTVTA%, NA
*XDIM_MEMBERSET MEASURES = "PERIODIC"
//FILTRO CANTIDAD
*FOR %ZMON% = CLP, USD, NA
*WHEN CEBE
*IS %ZCEBE%
*WHEN CUENTA
*IS NA
*WHEN MONEDA_PPTO
*IS NA
*WHEN PARAMETRO
*IS ZACB002
*WHEN SUCURSALES
*IS %ZSUC%
*WHEN TIPO_VTA
*IS %ZTVTA%
//SUMATORIA DE CANTIDAD CAMIONES * FLETE
*REC( EXPRESSION = (%VALUE% * ([CEBE].[NA],[CENTRODECOSTO].[NA],[CUENTA].[NA],[PARAMETRO].[ZPTF01],[MONEDA_PPTO].[%ZMON%],[TIPO_VTA].[NA],[SUCURSALES].[%ZSUC%],[MODELO].[NA])), CEBE = NA, TIPO_VTA = NA, SUCURSALES = %ZSUC%, CUENTA = 312310000,CENTRODECOSTO = %CENTRODECOSTO_SET%, MONEDA_PPTO = %ZMON%,PARAMETRO = NA, MODELO = NA)
*ENDWHEN
*ENDWHEN
*ENDWHEN
*ENDWHEN
*ENDWHEN
*ENDWHEN
*NEXT
*COMMIT

Password expire policy for FBA users

Hello,
I would like to know whether we can define password expire policy in the web.config of the FBA based web application or not, just like we do for Invalid password attempts and other properties.
If not then what is the best way to apply password expire policy like user must change the password after 50 days or something like that?
Thank!
Sohaib Khan

well.. FBA covers the UI for logging in, not the actual mechanism...
but assuming you're talking about the SQL MEMBERSHIP PROVIDER... yes, it's easy to modify... just search for it.
That said, there's nothing built into SharePoint that will:
- Alert users that their password is about to expire / has expired
- Provide them a method to change their password
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

How to assign different passwords for different resource accounts

Hi everyone,
We have a situation where we have users with two resource accounts. They have different passwords with different lengths.We are using Flat file active Sync adapter to create users in both resources and there we are setting passwor.password field. But we need to set different passwords to every resource account and it is obviosly it can not be done with password.password field. We tried e password view before provisioning where we chekout the user and set the follwing parameters:
<set name='userview.resourceAccounts.selectAll'>
<s>false</s>
</set>
<set name='userview.resourceAccounts.currentResourceAccounts[RES1].selected'>
<s>true</s>
</set>
<set name='userview.resourceAccounts.password'>
<ref>accountId</ref>
</set>
<set name='userview.resourceAccounts.confirmPassword'>
<ref>accountId</ref>
</set>
But it did not worked. So is there a way to set different passwords to different accounts in SUN IDM?
Oh and forgot to mention we are using Sun Idm 8.1 patch 9.
Best regards.

I actually managed to change the required password but i copied this in Provision externeal Resources.
<Action id='1' name='Check out password view' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkoutView'/>
<Argument name='type' value='Password'/>
<Argument name='id' value='$(accountId)'/>
<Argument name='authorized' value='true'/>
<Argument name='subject' value='Configurator'/>
<Argument name='TargetResources'>
<List>
<String>RES1</String>
</List>
</Argument>
<Return from='view' to='userview'/>
</Action>
<Action id='2' name='reset password'>
<expression>
<block name='reset password' trace='true'>
<set name='userview.resourceAccounts.selectAll'>
<s>false</s>
</set>
<set name='userview.resourceAccounts.currentResourceAccounts[RES1].selected'>
<s>true</s>
</set>
<set name='userview.resourceAccounts.password'>
<ref>accountId</ref>
</set>
<set name='userview.resourceAccounts.confirmPassword'>
<ref>accountId</ref>
</set>
</block>
</expression>
</Action>
<Action id='3' name='check in password view' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkinView'/>
<Argument name='view' value='$(userview)'/>
<Argument name='authorized' value='true'/>
<Argument name='subject' value='Configurator'/>
</Action>

Resource account password set during User Update process.

Hi friends,
I added to the Update WF a step to initialize an account password when, during the update of the user, IDM creates the new resource account.
This is an initial password (known).
This event basically happens in two User's Update cases:
A. when the account was (accidentally) removed from the resource
B. when a new Role requires to add a new resource account to the user
In both cases IDM (re)creates the user account on the resource.
In order to set this account initial password, I check (in the Update WF) the value of 'user.update.toCreate': if it contains the resource name, then I set the pw after the account has been provisioned.
This method fails during case B. only when, for some reason, the resource account already exists BEFORE the update starts: even if the account is already there, IDM sets 'user.update.toCreate', leading my step to reset the account password to the initial value.
What could I check in order to avoid it? (I don't want to reset account passwords when linking existing accounts)
The only way I see at the moment would be to query the resource at the beginning of the Update WF to check if the account is already there...
MTIA

Hi,
Have you found a resolution to this problem?
Thanks
Edited by: sun_to_Orcl on Jan 31, 2010 8:28 PM

(Windows 8) account password has expired

I'm attempting to remote into my PC which I left at university. When I tried this morning, I was informed that my password had expired. I went online to change the password and tried again only to find that neither the changed password nor the
old password would allow me to log in. This happened to me once before and the only way I was able to resolve the issue was to log into the computer "in person". Given that I'm a few hours away, I'd rather avoid that if at all possible.
Any suggestions?
Thanks,
Matt

Hi Matt,
Did you receive any particular error when you are not able to change password?
Are you connecting through RD Gateway server? If yes then you will not be able to access if password expire. You can work around to access via RD web.
Here providing article for reference.
You cannot change an expired user account password in a remote desktop session that connects to a Windows Server 2008 R2-based RD Session
Host server in a VDI environment
RDS in WIN8 Feature highlight no. 3 Change password option in RD WebAccess
Hope it helps!
Regards.

SharePoint Service Accounts - Passwords have expiration date when they are set to never expire

The managed accounts in my farm all have the Enable automatic password change
unchecked. Also these same accounts in AD have the Password never expires
checked.
If I use get-spmanagedaccount to view the accounts, some passwords show as already expired or have a future expiration date.  The automatic change is set to False and nothing is listed under the Change Schedule.
The strange thing to me is that the passwords listed as expired are still valid and haven't been changed. I even ran an iisreset just to check and there were no issues. When I look in CA the next password change area is blank for all accounts.
My question is why do the accounts list a password expiration date if it's set to
not automatically change passwords.  If you do change the password through AD you will see a new expiration date set for 90 days later.  I'm just wondering how much I should worry about the service accounts that are listed
as having expired passwords even though the passwords aren't expired.  My sites and services are running but I'm just curious if this could potentially cause other errors.
Thoughts?  Prayers? Condolences?
Jennifer Knight (MCITP, MCPD)

I checked the My farm as well, you are correct. Even you did not select the automatic password change still it showed 90 days as expiry.
You don't need to worry about it, it will not hurt, one of the dev farm having account which expired almost 10 months ago. :)
you can double check with in central admin and you will see no expiration set over their.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

ActiveSync - link resource account and password push

Is it possible to push a password from an IDM account to a resource account at the same time as linking the two accounts, during ActiveSync?
Scenario: I have an account in IDM and an account on a resource. I use ActiveSync to "discover" the account on the resource and link the IDM account with the resource account. At the same time I would like to push the IDM password to the resource. Thereby, synchronizing the IDM password with the resource password.
I have unsuccessfully tried to accomplish this in many ways:
1) Within the Admin GUI, I've edited an account and when I assign the resource to the account the password in IDM does not push to the resource.
2) Within ActiveSync, I have used global.password, password.password, password.confirmPassword, password.targets, password.accounts[resource].selected
NOTES:
- when the account exists on the resource and IDM links to the resource account, the password does not push
- when the account does not exist on the resource and IDM is required to create the resource account, the password is pushed
At this point my guess is that I will have to kick off a workflow to trigger the password push as the ActiveSync cannot handle linking and subsequently updating an attribute on that resource at the same time. Any ideas would be helpful. Thank you in advance.

I have been able to successfully push the password to the resource both during activesync and within the Admin console. However, I have found some inconsistencies with IDM that might need attention or an explanation.
First off, the key to pushing the password from IDM to the resource in the above scenario is....within the Resource Schema don't map IDM user attribute "password" but map an attribute such as "resource_password" to the password field on the resource. When I did this, I was able to provision the resource to the user in IDM and push the password to the existing resource account.
Secondly, there is an inconsistency with IDM and how it treats password and the other fields. I mapped lastname to a field on the resource. From the admin console, I edited the user and the only change I made was to provision the resource to the user (Resources tab). After saving this user, the lastname field from IDM was updated on the resource.
Why doesn't this work with password?

RSOP: Interactive logon: Prompt user to change password before expiration

Hi,
I am trying to implement a GPO so that users are prompted to change their password 5 days before it expires. I have done this via -
Computer Configuration > Windows Settings > Security Settings > Local Policies > Security Options > Enabled
Interactive Logon: Prompt user to change password before expiration
Despite doing the above the GPO does not seem to be taking effect. I have run RSOP on my machine and a few users machines and can see that there is a red circle with an X next to
Interactive Logon: Prompt user to change password before expiration.
Below is my winlogon.log file but I am not really sure what I am supposed to be looking for. Can anyone help?
Make a local copy of \\**************.co.uk\sysvol\**************.co.uk\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\Machine\Microsoft\Windows NT\SecEdit\GptTmpl.inf.
GPLinkSite GPO_INFO_FLAG_BACKGROUND )
Make a local copy of \\**************.co.uk\sysvol\**************.co.uk\Policies\{91EDC47D-AACF-4DFE-B044-5D29500CECBE}\Machine\Microsoft\Windows NT\SecEdit\GptTmpl.inf.
GPLinkDomain GPO_INFO_FLAG_BACKGROUND )
Make a local copy of \\**************.co.uk\SysVol\**************.co.uk\Policies\{DDE2DDB7-9802-415B-819E-1ADA496DC3E6}\Machine\Microsoft\Windows NT\SecEdit\GptTmpl.inf.
GPLinkDomain GPO_INFO_FLAG_BACKGROUND )
Make a local copy of \\**************.co.uk\sysvol\**************.co.uk\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\Machine\Microsoft\Windows NT\SecEdit\GptTmpl.inf.
GPLinkDomain GPO_INFO_FLAG_BACKGROUND )
Make a local copy of \\**************.co.uk\SysVol\**************.co.uk\Policies\{6422C1A4-D958-4F4B-A8AA-EBACC567BD19}\Machine\Microsoft\Windows NT\SecEdit\GptTmpl.inf.
GPLinkOrganizationUnit GPO_INFO_FLAG_BACKGROUND )
No template is defined in GPO \\**************.co.uk\SysVol\**************.co.uk\Policies\{43F654AA-56D5-4F2C-B357-1AFEE03D37F2}\Machine.
Process GP template gpt00000.inf.
This is not the last GPO.
08 March 2015 23:06:35
Copy undo values to the merged policy.
----Un-initialize configuration engine...
Process GP template gpt00001.dom.
This is not the last GPO.
08 March 2015 23:06:36
----Un-initialize configuration engine...
Process GP template gpt00002.dom.
This is not the last GPO.
08 March 2015 23:06:36
----Un-initialize configuration engine...
Process GP template gpt00003.dom.
This is not the last GPO.
08 March 2015 23:06:36
----Un-initialize configuration engine...
Process GP template gpt00004.inf.
08 March 2015 23:06:36
----Configuration engine was initialized successfully.----
----Reading Configuration Template info...
----Configure User Rights...
Configure S-1-5-32-544.
Configure S-1-5-21-778002760-1239436532-1307212239-1002.
Configure S-1-5-21-778002760-1239436532-1307212239-1016.
Configure S-1-5-21-778002760-1239436532-1307212239-4078.
Configure S-1-5-21-778002760-1239436532-1307212239-512.
Configure S-1-5-21-778002760-1239436532-1307212239-500.
Configure S-1-5-21-778002760-1239436532-1307212239-513.
User Rights configuration was completed successfully.
----Configure Group Membership...
Configure **************\Local Admins for Users.
old memberof tattoo list: *S-1-5-32-555,*S-1-5-32-544,
object already member of Administrators.
object already member of Remote Desktop Users.
new memberof tattoo list: *S-1-5-32-555,*S-1-5-32-544,
Group Membership configuration was completed successfully.
----Configure Security Policy...
Configure password information.
Configure account force logoff information.
System Access configuration was completed successfully.
Configure machine\software\microsoft\windows nt\currentversion\winlogon\passwordexpirywarning.
Configure machine\software\microsoft\windows\currentversion\policies\system\enableinstallerdetection.
Configuration of Registry Values was completed successfully.
Audit/Log configuration was completed successfully.
----Configure available attachment engines...
Configuration of attachment engines was completed successfully.
----Un-initialize configuration engine...
this is the last GPO.
Make a local copy of \\**************.co.uk\sysvol\**************.co.uk\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\Machine\Microsoft\Windows NT\SecEdit\GptTmpl.inf.
GPLinkSite GPO_INFO_FLAG_BACKGROUND )
Make a local copy of \\**************.co.uk\sysvol\**************.co.uk\Policies\{91EDC47D-AACF-4DFE-B044-5D29500CECBE}\Machine\Microsoft\Windows NT\SecEdit\GptTmpl.inf.
GPLinkDomain GPO_INFO_FLAG_BACKGROUND )
Make a local copy of \\**************.co.uk\SysVol\**************.co.uk\Policies\{DDE2DDB7-9802-415B-819E-1ADA496DC3E6}\Machine\Microsoft\Windows NT\SecEdit\GptTmpl.inf.
GPLinkDomain GPO_INFO_FLAG_BACKGROUND )
Make a local copy of \\**************.co.uk\sysvol\**************.co.uk\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\Machine\Microsoft\Windows NT\SecEdit\GptTmpl.inf.
GPLinkDomain GPO_INFO_FLAG_BACKGROUND )
Make a local copy of \\**************.co.uk\SysVol\**************.co.uk\Policies\{6422C1A4-D958-4F4B-A8AA-EBACC567BD19}\Machine\Microsoft\Windows NT\SecEdit\GptTmpl.inf.
GPLinkOrganizationUnit GPO_INFO_FLAG_BACKGROUND )
No template is defined in GPO \\**************.co.uk\SysVol\**************.co.uk\Policies\{43F654AA-56D5-4F2C-B357-1AFEE03D37F2}\Machine.
Process GP template gpt00000.inf.
This is not the last GPO.
09 March 2015 16:26:51
Copy undo values to the merged policy.
----Un-initialize configuration engine...
Process GP template gpt00001.dom.
This is not the last GPO.
09 March 2015 16:26:51
----Un-initialize configuration engine...
Process GP template gpt00002.dom.
This is not the last GPO.
09 March 2015 16:26:51
----Un-initialize configuration engine...
Process GP template gpt00003.dom.
This is not the last GPO.
09 March 2015 16:26:51
----Un-initialize configuration engine...
Process GP template gpt00004.inf.
09 March 2015 16:26:51
----Configuration engine was initialized successfully.----
----Reading Configuration Template info...
----Configure User Rights...
Configure S-1-5-32-544.
Configure S-1-5-21-778002760-1239436532-1307212239-1002.
Configure S-1-5-21-778002760-1239436532-1307212239-1016.
Configure S-1-5-21-778002760-1239436532-1307212239-4078.
Configure S-1-5-21-778002760-1239436532-1307212239-512.
Configure S-1-5-21-778002760-1239436532-1307212239-500.
Configure S-1-5-21-778002760-1239436532-1307212239-513.
User Rights configuration was completed successfully.
----Configure Group Membership...
Configure **************\Local Admins for Users.
old memberof tattoo list: *S-1-5-32-555,*S-1-5-32-544,
object already member of Administrators.
object already member of Remote Desktop Users.
new memberof tattoo list: *S-1-5-32-555,*S-1-5-32-544,
Group Membership configuration was completed successfully.
----Configure Security Policy...
Configure password information.
Configure account force logoff information.
System Access configuration was completed successfully.
Configure machine\software\microsoft\windows nt\currentversion\winlogon\passwordexpirywarning.
Configure machine\software\microsoft\windows\currentversion\policies\system\enableinstallerdetection.
Configuration of Registry Values was completed successfully.
Audit/Log configuration was completed successfully.
----Configure available attachment engines...
Configuration of attachment engines was completed successfully.
----Un-initialize configuration engine...
this is the last GPO.
Jeet S

******UPDATE******
I think I have managed to get this working. I changed the source of the policy to a different GPO. I then did the following -
From a command prompt run gpupdate (without the force parameter)
Ran rsop.msc and checked the policy and this time there was no red circle with an X
Have done the same on a few users machines and it appears to apply successfully. I say this because when you go into the properties for the policy you see the following -
The policy XYZ was correctly applied
Just have to wait and see if it actually does what it says on the can.
Jeet S

Test period expired creative cloud for photography

Test period expired, creative cloud for photography. I have done all the steps that appear on the web about it and not work for me. What I can do? Thank You.
I have t Windows 8.1 64-bits

When the 30 day trial ends, you need to purchase a subscription to continue... have you done that?
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Help needed - setting password policies for different types of accounts

Hello,
We have a situation where we have different types of users created on a solaris server. We have regular users, admins, functional accounts and device accounts. Of course solaris does not differentiate between regular user and other types, i think. The default password policy applies to all the users on the server. I want to configure different policy for different types of user accounts. Is it possible? The difference between the accounts on our side is
Regular user accounts - 8 digit numbers ( 00667265) - expire password every 90 days
Functional accounts - 8 digits starting with F ( F0253466) - do not expire, but password length must be 10-12 and complex
Device Accounts - 8 digits starting with Z ( Z2367249) - do not expire, but password length must be 12 and complex - like upper case, lower case, number, special chars etc.
Is it possible to set up different password policies, is so how?

The password expiration policy is pretty easy, it can be set on a per account basis when the account is created. I'm not aware of a simple way to define a complexity policy for groups of accounts but the policy is enforced using pam, so you should be able to write a pam module which would enforce your complexity policy. The pam manual page would be a reasonable starting point for learning about pam.

How to set password never expires for a user?

Hello,
I can't seem to find in the Administrative Console a place to enable "Password never expires".
I know that if I edit the USR_PWD_NEVER_EXPIRES field in the OIM DB and put the value '1' it will work.
However, I'd like to know how and if it is possible to activate this option on a user via OIM.
Thanks in advance,
Tomic

Hi,
Now I got it.Try this one.
In FormMetaData.xml you will find.
<Attribute name="-13" variantType="String" dataLength="1" map="Users.Password Never Expires" />
Modify it to.
<Attribute name="-13" variantType="String" dataLength="1" displayComponentType="CheckBox" map="Users.Password Never Expires" />
Add this in.
<Form name="3">
<AttributeReference editable="true" optional="true">-13</AttributeReference>
I never need this but I hope above will work.
About disabling the resource I have few suggestion for you.
1.You can have your password policy consistent across the resources you are integrating in OIM.
2.Write an entity adapter so that when ever password is expired then can disable all provisioned user.
3.Alternatively you can also write a schedule task which will check for password expire date and disable the resource.
4.You will also need to enable the resources when password is changed.You can catch change password event through event handler or entity adapter.
Please let me know if you have fllow up questions.
Regards
Nitesh

Apply password period expire policy to resource accounts

Similar Messages

Maybe you are looking for