Applying Behaviours To Templates For COntribute

Hi,
I'm trying to adapt a page so a client can attach the open
browser window behaviour in Contribute. Is it possible to attach
this behaviour in Contribute itself ? If not can anyone think of
workaround in Dreamweaver ? Bear in mind that this needs to be as
close to foolproof as is possible !
I have figured out a way to insert a div into an editable
region and then attach the behaviour to the div tag, but that
doesn't make the link immediately apparent. Is there a simpler
workaround to this ?
Thanks
Simon

I would never attach event handlers to <div> tags, or
anything other than
<a> tags, for what it's worth....
As for allowing clients to add OBW-type behaviors in
Contribute, I'm not
sure how you could do this. Sorry.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"roonaldo_efc" <[email protected]> wrote in
message
news:fbmb83$do1$[email protected]..
> Hi,
>
> I'm trying to adapt a page so a client can attach the
open browser window
> behaviour in Contribute. Is it possible to attach this
behaviour in
> Contribute
> itself ? If not can anyone think of workaround in
Dreamweaver ? Bear in
> mind
> that this needs to be as close to foolproof as is
possible !
>
> I have figured out a way to insert a div into an
editable region and then
> attach the behaviour to the div tag, but that doesn't
make the link
> immediately
> apparent. Is there a simpler workaround to this ?
>
> Thanks
>
> Simon
>

Similar Messages

Non-Dreamweaver templates for Contribute

Are there any guidelines anywhere for creating the equivalent
of Contribute editable/non-editable templates for sections of HTML
pages which were not created by Dreamweaver; for example,
guidelines on the use of  etc.?

Ian,
The Dreamweaver template system works from the standpoint of
a "deny all, allow some" mentality.
Initially a Dreamweaver template file allows no editing to
any sections. When modifying the template in Dreamweaver or any
other text editor, the addition of the begin/end editable pairs
enables the editing of any content existing within the tag pair.
If you want to create a template for use with Contribute
outside of Dreamweaver just create the file with any editable
sections you desire then change the file extension to .dwt and
place it in the "Templates" directory on your CPS managed
webserver. Any files in the "Templates" directory that end with
".dwt" will be loaded on the next startup of the Contribute client.
By default the Publisher and Writer roles allow access to all
templates in the "Templates" directory via the Contribute client.
Also, make sure that the "whatever" text mentioned by Murray
is unique to each individual editable region.
Please note that the Contribute/Dreamweaver template
interaction is *not* a run-time template system. Dreamweaver
templates are design-time templates. If you have sections of the
template that change later then those changes will need to be
applied on a page-by-page basis to each page using a given
template. This functionality is automatically handled within the
Macromedia workflow by using Dreamweaver to download the entire
site then having it update all pages that are based on a given
template.
The piece of the code that denotes which template is assigned
to a given page is as follows:

with an acompanying closing tag of:

The "InstanceBegin" tag should follow the opening html tag
and the "InstanceEnd" tag should precede the closing html tag.
The important piece of the "InstanceBegin" tag is the value
of the "template" attribute. This needs to be the path to the
specific template file relative to the webroot on the server.
Hope this helps.

Apply a new template in Contribute?

Have an existing site in Contribute that has hundreds of pages. How do I update the template applied to all of the pages? I had 2 ideas:
1) Edit the existing template, keeping all the file and editable region names the same (thinking that the next time the page pulls the template, it will pull the new content).
2) Creating a new template with the same editable region names and finding a command to apply the template to all of the pages.
Suggestions?

Hi,
This can be easily done if you have Dreamweaver. In Dreamweaver, connect to your website, edit the template which you want to change. Make your changes to it, and save it. Then, it will ask whether you want to make changes to the web pages based on this template, click Update to update the changes, or if you do not need to update, you can click Don't Update. Dreamweaver checks out the web pages, and makes the changes.
Hope this helps.

Apply template for content area page

Does anybody know how i can apply a template
for a content area page.
I have to duplicate everything i did on the template to achive to same look and feel in the content area???????
!@#$%*grrrrrrrrrrrrrrrrr
null

Harish,
What are you trying to do?
Are you using an unstructured UI template on your other pages, with release 3.0.8?
If you are, you could put your presentation code in a stored procedure, and call the procedure within ORACLE tags from the template. For the CA page, call the procedure from a Dynamic Page, and display the Dynamic Page as a portlet on the CA page.
In a future release we'll be combining portal and CA pages into a single entity, so we won't have these inconsistencies.
Regards,
Jerry
Regards,
Jerry
null

Custom Template for Third Party Balance Summary Report(Java type executable

Hi Al,l we have a requirment to have a layout with some of the fields from
Third Party Balance Summary Report( Which is a Java type executable and
Data definition has Data Template attached(.xml)).
I tried in below way.
Coppied the Third Party Balance Summary Report program with same application and parameters
with. Then defined a Datadefinition with my concurrent prog short name
attached the same standard .xml file(Not sure what it is) and developed a custom template with
a custom rtf(excel output type), and submitted the program
the output is generated in excel but my custom .rtf layout is not getting applied
rather it is showing same layout as in standard.
Some thing I am missing here or else it is not the way of changing the
template.
If any one know how to do this please let me know.
My client want only some files from the standard report(no need of new fileds)
with output type xls.
Thanks in Advance.
The same content is posted in Custom Template for Third Party Balance Summary Report(Java type executable sorry for duplicating the thread, just for increase the visibility for my issue I did this.

I gave up on using a different font or figuring out if I could use Times New Roman's built-in fractions visible in Font Book (as unicodes) and did a work-around based on Michael Wasley's tips in this discussion.
https://discussions.apple.com/message/11622842#11622842
I adapted it however and think it looks a little better.
Font: Times New Roman 12 point
I used the fraction bar in 12-point (Shift-Option-1) for automatic kerning.
For the numerator, I changed the font style to superior (12-point).
For the denominator, I changed the font style to subscript (Shift-Command-hyphen) and reduced the font size to half, or 6-point using the short-cut Shift-Command-<.
When the fractions occured in my footnotes (9-point), I used 4-point in the denominator; 10- and 11-point, I used 5-point in the denominator. This seemed to produce the best result when printing.
Thank you, Michael.
-Dottie

Update content type template for existing sites in sharepoint 2010 ?

Hi,
I created one custom document library (list definition) and associated 3 content types which has docment template path (\_layouts.template1.docx). I rollout nearly 200 sites with this definition. now i want to update my document template and also i want
to change template docx to dotx.
what is the best approach to apply these changes for existing sites ?
Thanks,
Surya.
suryakumarp

Hi suryakumar,
As I understand, you want to update the template
for existed content type.
It can be achieved by programming. There is a
SPContentType.DocumentTemplateUrl Property, which can be used to update content type.
Here is a demo:
http://officepoint.blogspot.com/2008/06/sharepoint-relink-infopath-forms-relink.html

Applying a New Template to a Page with Tabs

Hi,
We use page templates for our pages. We know that you cannot add a region to a page based on a template, but supposedly you can add tabs to a page based on a template.
One template we have has a single tab on it. The web designers have been adding content to pages built on that template. When they need another tab, they add it and add content to the new region on the tab. They may do this until there are 4 tabs on the page (the original tab that is in the template, plus three additional tabs). We use this for example to collect links to memos and to divide the links onto 4 tabs representing calendar quarters.
One of the problems with this process is that the web designers have not been consistent in using uniform definitions for the region on each tab causing an inconsistent look-and-feel from one tab to the next.
I have created a new template with 4 tabs already defined and with the region properties already defined. The web designers can then add content as needed and if a tab is not required it can be marked as hidden.
The problem that I am running into is that if I try to apply the new template to an existing page, I get the following error message:
Error: ORA-00001: unique constraint (PORTAL.WWV_THINGS_NAME_UK) violated
Also, consistently the content from the original first tab is lost and there is no corresponding tab on the reformatted page. Content on the second tab appears to be OK, but content on the third tab is missing. Content on the fourth tab appears to be OK.
Can anyone tell me 1. what is specifically causing the error message, and 2. is it possible to do what I want to do or will all of these pages have to be recreated manually instead of changing the templates.?
Thanks,
Peter

You should be able to do what you are trying to do. You seem to be running into a bug. Please file this with support if possible. Based on the error message, you seem to be running into a case of duplicate names, on either items or tabs. What you might try doing is renaming the tabs, ensuring uniqueness, before changing templates. By "renaming", I mean changing the NAME of the tab, not the Display Name, by clicking Edit Tab in edit mode. Does this help at all?

How to correct SpryAssets/SpryMenuBar paths in template for sub-directories?

I recently converted my real estate web site to CSS using Dreamweaver CS4. I use a primary template for most of my pages, which have both a horizontal and a vertical spry menu bar. When I create a page with the template and save it in a sub-directory (not at root level), after a page view, I get errors on the server such as:
File does not exist: /home/I_DELETED_THIS/public_html/homes_for_sale/SpryAssets, referer: http://locatehome.com/homes_for_sale/10-2264.htm
(I replaced part of the URL with "I_DELETED_THIS" since this is posted publicly)
The SpryAssets directory is at the root level of my site. The template includes the code further below at the bottom of the source code in a non-editable area of the template, which I think is the source of the problem, especially since I get two error messages for each page view and the SpryAssets directory is referenced twice in the following code after the last div. Part of the code is commented out:
<script type="text/javascript">

</script>
</body>
Can I delete this code from the template or will my menu bars not function if they have sub-menus?
The template changes the file path for other CSS scripts in the head of the template and links, etc. in the body, but not for this section of code. Is there a way to modify my template so that the path files will be correct when a create new pages in sub-directories?
I saw one suggestion in the Forum to another user with a related problem that he should manually change the code in this section of the template to have a file path relative to the root, but it seems that the program should automatically be taking care of things like that.
Many thanks,
Dave K.

<script type="text/javascript">

</script>
No you cannot delete the menu constructors, they are the ones that call the menus. The comment tags are purely for browsers that do not have JavaScript enabled.
As far as template behaviours are concerned, I am afraid that this is not a very helpful forum. You will need to go to the Dreamweaver Forum for that http://forums.adobe.com/community/dreamweaver/dreamweaver_general
I hope this helps.
Ben

How to apply a master template in a built webI report

Hi Experts,
I have around 60 webI reports already built in WebI (BO 4.0 with BICS conection). Now, my client wish to change the lay out in order to adapt to new visual requirements.
I was wondering if is there any way to apply a master template and minimize the effort because for while the unique solution for this is change the xml file.
Any ideas?
thanks in advance,
Eduardo Moreno

Hi Eduardo,
Master template or Template is npt possible for Webi reports in BO 4.0..

ESSO-LM Template for Web App with select tag

Hi everyone,
I am tasked with creating a template for a web application and the desired behaviour is that when logging into the application the language will be selected from <select> list.
It seems that the ESSO only allows to choose from the list only based on the the title="xxx" the xxx between <option>xxx</option> tags (the actual code is <option value="yy" title="xxx">xxx</option>). The problem I face is that the "xxx" string changes based on the language selected (e.g. when English version is selected, xxx values are in English; if German is selected, xxx values are in German; etc.).
Is there any way ESSO can change the language in the list (using the Input Element Type "Select-One") using the value="yy" or do I have to push for the universal, language independent, naming convention for "xxx" string?
Thank you for your time.
Ondrej

did you try passing the period without the separator
0122006

Using the pre-configured SCCM 2012 SP1 endpoint protection templates for Exchange 2010?

I am looking to update the exclusions for SCCM Endpoint Protect clients performing server AV protection on Exchange 2010 nodes.
Within SC there are a number of pre-defined templates, including ones for Exchange 2007 / 2010. However when I analyse these they do not appear to list all the exclusions that the Exchange product team define on TechNet -
http://technet.microsoft.com/en-us/library/bb332342(v=exchg.141).aspx
So do I;
1 - Use the template as it has been verified by Microsoft for using with Exchange 2010 and it covers all I need to exclude?
2 - Edit the template, adding in the additional exclusions as defined by the Exchange product team?
Would whichever logic I use apply to other templates, such as SQL, SharePoint, etc as well?
Thank you
Alan

As I cut and pasted the xml file I noticed the following comment that I had missed before..........
        
        
        
Still going with adding the full recommended list from TechNet though

Testing dreamweaver templates in contribute

I have a client that wants me to set up a template for
sending mass HTML e-mail that they can edit in contribute. I have
set up the page and template in dreamwever and want to post and
test. Is there any easy way to do this without setting up a full
fledged contribute server. Any help would be great.

How are they going to send the mail, from their own computer
using an emailclient or from a server, using a database and script?
When they use an emailclient like Outlook Express, you could
save the html file based on the template on their computer and make
it available as newsletter in Outlook Express (send it BCC, cause
otherwise eveyone gets all the email addresses).
Your client could edit this file using Contribute (in the
menu go to File, Open, Edit the file in edit mode and save the
file).

Excel File [.xlsx] of more than 5 MB - Not applying Excel Display Template

Hi Team,
We have an issue in SharePoint 2013 Search Results for Excel files having extension .xlsx format. Some files which are having more than 5 MB size are not applying Excel display template. Even we are not getting Excel icon beside the Search result of this
item.
For all other excel files like [All sizes of .xls format and files less than 5 MB of .xlsx format] Excel display template is applying.
Can anyone help me on this. Do we have any issues/limitations on file size for Search Results.
Thanks, Dinesh
Dinesh Pulugundla, Microsoft Certified Technology Specialist.

Hi Dinesh,
Yes,SharePoint Search crawl component downloads metadata and content from a document until it reaches the maximum document size. For Excel documents, the maximum document size is 3MB. And you can change the limit for the maximum document size, but it does
not affect Excel documents.
Reference:
http://technet.microsoft.com/en-us/library/cc262787(v=office.15).aspx#Search
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Process/templates for gathering information about existing BI functinality

Hi everyone - Excuse me for posting this question to the thread, it is more of a bus analysis question. I need to document an existing BI / reporting system and identify:
1. Usage of the reports
2. Business units using it
3. Can the reports be consolidated
4. Sources being used
5. Business rules being applied
6. Can these reports be deleted
Can you suggest a process or a set to templates, if you have participated in similar initiatives ?
Much appreciated,
Iliya

Thanks, this helps with the usage aspect, looking into it, but my question had more to do with a business analysis process or document templates for gathering information, documenting sources, rules, etc.I would think this goes a bit too far from their knowledge for most people in this forum and you might be better going to BA specialized forums or searching in Google. I could give some sample docs but we don't have templates where I work so it will take me ages to go through them to remove any confidential or sensitive data.

DataModeler v3.3.0 - Naming standards template for surrogate keys creation

I'm using DM 3.3.0.734 and in the logical model we now can define in the entity properties to "Create Surrogate Key".
When we use Engineer to relational model, for each entity is automatically created a new column using the naming template {entity}_ID as NUMERIC (without precision) and is defined as primary key.
My questions are:
Is possible to define a different naming standard for surrogate key creation?. We define id_{entiry}
Is possible to set the precision of NUMERIC surrogate key?
If we define entity's column as Primary UID, these columns are included in an unique constraint, but are using the naming standards for PK.
As consequence are created the following:
Unique constraint name: entity_PK
Primary key(surrogate)name: entity_PKv1
There is any way to define naming standards like "{entity}_UID" for unique constraints, or even, "{entity}_SK" for surrogate primary key name?
Can anyone help with some of these topics?
Regards,
Ariel.

Hi Ariel,
Naming standards template for surrogate keys creation I logged enhancement request for that.
How to change those bad names (going to change them one by one is not an option):
1) If those "transformed" unique keys are the only ones you have in relational model then simply can apply naming standards
2) You can write transformation script to do that for you
3) you can use new functionality - search, export to excel file, change the names there (using find/replace will be faster) and return changed data back to relational model
you can find description for that here:
https://apex.oracle.com/pls/apex/f?p=44785:24:13179871410726::NO:24:P24_CONTENT_ID,P24_PREV_PAGE:6621,16
http://www.thatjeffsmith.com/archive/2012/11/sql-developer-data-modeler-v3-3-early-adopter-search/
http://www.thatjeffsmith.com/archive/2012/11/sql-developer-data-modeler-v3-3-early-adopter-collaborative-design-via-excel/
You should search for _PK, then filter result on Index and you can export result using report functionality (to XLS or XLSX output format). You can create template and include only table and name (of index) as properties to be included into report.
Regards,
Philip

Applying Behaviours To Templates For COntribute

Similar Messages

Maybe you are looking for