Applying different template to the same item for different organizations

Hi I'm having an issue with an item load.
We are trying to load a list of items using the item import.
3 orgs
1: mas
2: first
3: second
say in the new list that we are importing there is an item "100A" (mtl_system_items_b.segment1)
This item already exists in the mtl_system_items_b as a master item (ie assigned to the master org) it has template "STOCK ITEM"
and is also attached to the first org
I want to create the same item as a nonstock for the Second org
Can this be done?
When i tried to do the import it failed giving me a INV_IOI_MASTER_CHILD_1A error (Master - Child Conflict in one of these Attributes: Default Buyer(BUYER_ID), Accounting Rule(ACCOUNTING_RULE_ID), Invoicing Rule(INVOICING_RULE_ID), Purchased(PURCHASING_ITEM_FLAG), Shippable(SHIPPABLE_ITEM_FLAG), Customer Ordered(CUSTOMER_ORDER_FLAG), Internal Ordered(INTERNAL_ORDER_FLAG), Inventory Item(INVENTORY_ITEM_FLAG))
Any ideas on how to do this?
Thanks
D

Hi Sandeep
Thanks a lot for the reply
In our MASter org setup, the Template "T1" is a STOCK_ITEM template and it has the stockable attribute set at the org level.
This item is also assigned to ORG1 as a T1 STOCK_ITEM.
So can we create the same item using "T2 which is a NON_STOCK Template in org2 ?
If yes then that means I just have to create a record in the MTL_SYSTEM_ITEMS_INTERFACE only for the child org2.My concern is I read somewhere that
the item import tries to match the attributes of the child org to the master org attribute(for attributes controlled at master org i think).
And since the attributes for a nonstock are different than those for a STOCK wouldn't that create a problem?
Thanks
D

Similar Messages

Payment Predictor applying multiple payments to the same Item when customer send more than 1 payment in 1 deposit.

We have an issue where customers are sending us multiple payments and they come in the same deposit. When payment predictor runs, it is applying both the payments to the same Item using different algorithms. I would think when an Item is selected by 1 payment it should be tagged like it is on a payment worksheet and another payment should not try to apply it to the same item. Ex: we have an Item with balance $1356. Two payments came in for the same customer for $992 and $1356 in the same deposit. Payment predictor applied both payments to the same Item using #BALANCE and #OLDESTC algorithm. The Item now has a balance of -$992. Did anyone else see this issue?
Thanks,

Are both the payments for the employee not transferred or only the unpaid one ?
How about paying both the amounts(status paid) and then do a transfer to SLA.
Cheers,
Vigneswar

How to Get Choices as a Dropdown from a different Column for the same Item In a Document Library?

Hello All,
I was trying to see if there is any way that we can get the choices for a Field from another filed in the same item in a Document Library.
To be specific.
I have Created a Project Document Set, Which has a Column called "Project Members" where all the members will be listed. This will be inherited to all the documents in that Project Document Set. This is used to grant Permission using Workflow.
I also have "Document Members" Column(This is only for Documents) who will be given Edit permissions to that Document using a Workflow. This can be any type of column(choice, People or Group etc) As long as I can select multiple values.
I am looking for a way to get the "Project Members"(Values or Users) as choices for "Document Members". I know this is possible in the List as you can customize in the InfoPath Form. But not sure in the Document Library.
Document Members can only be the members from the Project Members, In order to grant granular Permissions for the project And Documents using a Workflow
Document Library
Project Document Set Name
File Name
Project Members
Document Members
Project A
User1;User2;User3
Doc1
User1;User2;User4
User1;
Doc2
User1;User2;User5
User1;User2;
Doc3
User1;User2;User6
User1;User2;User3;
Project B
User5;User6;User7;
Doc1
User5;User6;User7;
User7;User5
Doc2
User5;User6;User7;
User7;User5
Doc3
User5;User6;User7;
User5;User6;User7;
Thanks for your time.

>
Jenny Karunakaran wrote:
> Hi Jung,
>
> Thanks for the reply. But I dont know how to assign value set to this attribute(i.e. Context atribute to which filter value property is bound). Can I use a supply function for this ?
>
>
> Regards,
> Jenny
No. A value set and a supply function are two completely different things. You use this Context API to populate the value set for an attribute:
IF_WD_CONTEXT_NODE_INFO=>SET_ATTRIBUTE_VALUE_SET
Value Sets are also how ByKey UI elements (like the DropDownByKey) are built. Here is a help document that discusses value sets - but in the context of the ByKey UI elements. The process is the same for creating the value set however:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/bb/69b441b0133531e10000000a155106/frameset.htm

Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.

They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?

As the title says.
I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?
I don't want to restart it because im scared that something might go wrong.
operating lion

LimitLess- wrote:
Hi,
I had the power supply connected when I attempted it previously but even so my problem occurred. My rom is different and so I still need to update it.
Thanks
I wanted to mark your answer helpful too but I didn't know that I could only put it for 2 answers. Sorry
That was good advice by G-N and s/he is correct about it. Unfortunately, ASC allows only 2 "helpful" and 1 "correct" marks per thread.

HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

How do i purchase the same song for a different itunes library on my computer?

How do I purchase the same song for a different itunes library on the same computer?

and then they will be sorted in the correct order.

Can you change rollover text in the same slice for different triggers?

Hi, I haven't used Fireworks since version 3, which was about 6 years ago, when I dabbled in web development. My past has come back to haunt me, and I need to make a fairly simple website pretty quickly for my boss. I've got myself CS4, and now that I've figured out that you can't use buttons for disjoint rollovers, I'm starting to make progress...
What I want to achieve, is that there are 6 'buttons' on my page, which when you rollover them will display text in a box to the side. I would use separate boxes for each button, but there isn't enough space on the page, as there is quite a lot of text, so I would like to use a box in the same place to display any of the 6 texts, depending on which button is rolled over. Can this be done?
I probably haven't quite got my head round layers, and this may be very simple, but could someone please point me in the right direction, even if it is a link to the right bit on product help?
Because the button disjoint rollover doesn't work, I have created 6 slices for the triggers. I tried hotspots first, but couldn't use them as I also want a rollover live filter effect on the trigger.

Yes, you can trigger different slice contents on rollover from multiple other slices.
It's easier to show than describe, so here is a sample file that does what I think you're looking for:
(1) six buttons
(2) each button has unique text
(3) each button has a rollover state
(4) unique text is displayed in the same place for each button on rollover
Hope this helps!
Dave
Right-click and save the image below - it's a Fireworks source file:

Why charged me twice for the same item? They have withdrew money from my bank account for the second time about half an hour later after the transaction was completed leaving me overdrawn.

Why charged me twice for the same item? They have withdrew money from my bank account for the second time about half an hour later after the transaction was completed leaving me overdrawn.

Hi Benjamins,
I've checked your account—you have two ExportPDF subscriptions. One placed on October 20 2013, and the other placed on October 11 of this year. So, you were probably charged the auto renewal for the subscription placed in 2013, and then the new charge for this year's order.
Please Contact Customer Care so that an agent can help get things situated for you. There's no reason to have two subscriptions to the same service, so an agent can help you cancel one, if you'd like.
Best,
Sara

Is it possible to use the same Switch for two different clusters.

I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.

user9198027 wrote:
I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.
Yes. Technically there will not be any conflict as long as the private addresses used by the 2 clusters do not collide, and provided that the switch's port capacity and bandwidth will not be exceeded.
Your NA (netadmin) can also configure the switch to separate the 2 Interconnects from one another (called partitioning when using Infiniband) - if the switch supports such features.
A major consideration is not to make the switch, public. That typically cause a range of problems and can have a serious impact on an Interconnect. But using 2 private networks on the same infrastructure should not have the same problems - if configured and implemented correctly.

PPOME - Can't insert the SAME task for different organization unit

Hi all,
I have a doubt; in SAP 46C, it seems that is impossible to insert in PPOME, Detailed window, Tasks tab the same task for different organization unit. The only way to do this is in PP01 - General management, where you can explicitely create a [B-007] relations with the same "T" Object. Now, it is a little bit difficult for a user to switch from PPOME ad PP01 when defining new organizational structure.
The question: is there any way to insert the SAME task directly in PPOME, overwriting the standard behaviour of the system that by default create a new task for each new insertion?
Thanks all
Paolo

Hi Naveen
thank you for your prompt reply.
The issue that I want to solve is that some organization unit (not all) must be flagged for an external export to another system, depending on some characteristic of each org unit. I didn't find a similar attribute on standard field, so I thought to insert a common task to all the org units to export, so that this relation can serve as the missing attribute on org unit definition.
PP01 let me insert a task (type T, and not TS) on an org unit directly, so I want to know if I'm going to break some standard behaviour of SAP if I insert a task on OU.
Thank you
Paolo

I want to have different headers in Pages. I want to be able to set them and not have them be the same. For example I want ii then iii and so on...How do I do that?

I want to have different headers in Pages. I want to be able to set them and not have them be the same. For example I want ii then iii and so on...How do I do that?

Hi BelleDesign,
"Headers" is short for "Continuing Headers."
Use a Header when you want recurring information on a series of pages in your document.
If ii, iii, etc. are page numbers, you can place them in Headers using Insert > Page Number, then formatting the page number to lower case Roman numerals.
For more on Headers and Footers, see Chapter 3, Working with document parts in the Pages '09 User Guide, available for download via the Help menu in Pages. Discussion of Headers and Footers starts on Page 54.
Regards,
Barry

HT201359 Why i have been billed six times for the same item? Pls help how to refund..

Why i have been billed six times for the same item? Pls help how to refund..

Did you change your card details on your account a number of times when trying to purchase the item, and five of them are temporary store holding charges : http://support.apple.com/kb/HT3702 ?
If they are all 'proper' charges then try the 'report a problem' link to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

TS4147 I have 2 iphones on the same icloud for 2 different users. We (the users) dont want identical contacts. How do I delete the contats from one phone without deleting them from the other phone.

I have 2 iphones on the same icloud for 2 different users. We (the users) dont want identical contacts. How do I delete the contats from one phone without deleting them from the other phone.

You can't; not if the phones are sharing the same iCloud account. If you want to keep your data separate, migrate one of them to a different iCloud account. (You can continue to share the same iTunes ID.)
To do this, go to Settings>iCloud, tap Delete Account (this won't effect the other phone), choose Keep on My iPhone, sign back in with a different Apple ID to set up a new account, turn on your iCloud data syncing, then choose Merge to upload the data to the new account. You can then go to icloud.com from your computer and delete the other person's data from each account.
Another option if you're only concerned about not sharing contacts but wish to share everything else, is to set up a second iCloud account on one of the phones and sync contacts with the secondary account. To do this, go to Settings>iCloud, turn Contacts to Off and choose Keep on My iPhone. Then go to Settings>Mail,Contacts, Calendars>Add Account>iCloud, sign in with a different Apple ID to create the secondary account, and turn Contacts to On. You can then go to icloud.com from your computer and delete the other person's contacts from each account.

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

Applying different template to the same item for different organizations

Similar Messages

Maybe you are looking for