Payment Predictor applying multiple payments to the same Item when customer send more than 1 payment in 1 deposit.

We have an issue where customers are sending us multiple payments and they come in the same deposit. When payment predictor runs, it is applying both the payments to the same Item using different algorithms. I would think when an Item is selected by 1 payment it should be tagged like it is on a payment worksheet and another payment should not try to apply it to the same item. Ex: we have an Item with balance $1356. Two payments came in for the same customer for $992 and $1356 in the same deposit. Payment predictor applied both payments to the same Item using #BALANCE and #OLDESTC algorithm. The Item now has a balance of -$992. Did anyone else see this issue?
Thanks,

Are both the payments for the employee not transferred or only the unpaid one ?
How about paying both the amounts(status paid) and then do a transfer to SLA.
Cheers,
Vigneswar

Similar Messages

Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.

They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

How can i use the same front panel graph in more than one events in an event structure?

i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
Solved!
Go to Solution.

Hi,
I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
Regards,
Nitzz
(Give kudos to good answers, Mark it as a solution if your problem is Solved)
Attachments:
Graph and shift registers.vi ‏12 KB
graph and local variables.vi ‏12 KB

Select the same attribute in a query more than once

Hi Experts,
My requirement is to select the same attribute in a query more than once.
How can I acheive this?
Expecting an early solution..
Pilliga

Hi,
Create a calculated attribute that just displays the "same attribute".
(Note: you will need to uniquely name this object).
For example, if you wish to display Emp Name twice in the same query, then create a calculated attribute called Emp Name2 and select it and Emp Name in your query and the same info will be displayed twice in your results set.
Cheers,
Tanish

When installing ICloud 3.1 always the Same Message appears: You have more than 1 Outlook, it doesnt work. but i have only Outlook 2013, any idea?

When installing ICloud 3.1 always the Same Message appears: You have more than 1 Outlook, it doesnt work. but i have only Outlook 2013, any idea?

Did you have previous versios of Outlook before you installed 2013?

Applying different template to the same item for different organizations

Hi I'm having an issue with an item load.
We are trying to load a list of items using the item import.
3 orgs
1: mas
2: first
3: second
say in the new list that we are importing there is an item "100A" (mtl_system_items_b.segment1)
This item already exists in the mtl_system_items_b as a master item (ie assigned to the master org) it has template "STOCK ITEM"
and is also attached to the first org
I want to create the same item as a nonstock for the Second org
Can this be done?
When i tried to do the import it failed giving me a INV_IOI_MASTER_CHILD_1A error (Master - Child Conflict in one of these Attributes: Default Buyer(BUYER_ID), Accounting Rule(ACCOUNTING_RULE_ID), Invoicing Rule(INVOICING_RULE_ID), Purchased(PURCHASING_ITEM_FLAG), Shippable(SHIPPABLE_ITEM_FLAG), Customer Ordered(CUSTOMER_ORDER_FLAG), Internal Ordered(INTERNAL_ORDER_FLAG), Inventory Item(INVENTORY_ITEM_FLAG))
Any ideas on how to do this?
Thanks
D

Hi Sandeep
Thanks a lot for the reply
In our MASter org setup, the Template "T1" is a STOCK_ITEM template and it has the stockable attribute set at the org level.
This item is also assigned to ORG1 as a T1 STOCK_ITEM.
So can we create the same item using "T2 which is a NON_STOCK Template in org2 ?
If yes then that means I just have to create a record in the MTL_SYSTEM_ITEMS_INTERFACE only for the child org2.My concern is I read somewhere that
the item import tries to match the attributes of the child org to the master org attribute(for attributes controlled at master org i think).
And since the attributes for a nonstock are different than those for a STOCK wouldn't that create a problem?
Thanks
D

My husband and I both have an i phone. When I send him a message it sends the message to myself as well - the same happens when he sends to me. How can we correct this?

My husband and I both have an i phone. When I send him a message it also sends it back to my phone. The same happens when he messages me. His messages are also picked up on my i pad.How can we correct this?

Are you both using the same Apple ID?
Also check Settings > Messages > Send & Receive > make sure it only contains your unique phone number and e-mail address de-select those entries belonging to your husband.
Do the same on his phone (de-select yours)

How to change the fact that after I send 5 emails I get a message to the effect that I cannot send more than 5 in 30 minutes?

So, I'm busily responding to emails, etc. etc. and, as I say, after 5 emails are sent in quick succession, I get some sort of message saying I may not send more than 5 messages in 30 minutes ... !!! How can I get rid of this limitation? Because, what happens is I then save the emails I'm writing as drafts -- but I don't always remember they are sitting in the drafts folder and am horrified when I go check a few days later and there are my email replies waiting to be sent.

Talk to your email provider.

I uploaded beta version of Firefox. jigzone puzzles download is loading multiple puzzles in the same wiindow maybe 20 or more puzzles at the same time. How doI get rid of the beta version and go back to the previsious versions or correct the problem.

My newspaper downloaded. the download of jigzone puzzle created multiple copies of the puzzle in the same window. I went to safari to see if it was the jigzone website but it downloaded correctly. How do I get rid of the beta version I downloaded this morning or correct this problem. I closed firefox and restarted the computer (IMAX) and problem persisted.

Did you scroll down on the archive page that was linked in the FAQ?
I see the following releases listed:
(Released 3/05/2012) Flash Player 11.1.102.63 (174 MB)
(Released 3/05/2012) Flash Player 10.3.183.16 (67.3 MB)
(Released 2/15/2012) Flash Player 11.1.102.62 (174 MB)
(Released 2/15/2012) Flash Player 10.3.183.15 (67.3 MB)
(Released 11/10/2011) Flash Player 11.1.102.55 (174 MB)
(Released 11/10/2011) Flash Player 10.3.183.11 (76.9 MB)
(Released 9/21/2011) Flash Player 10.3.183.10 (80.5 MB)
(Released 8/24/2011) Flash Player 10.3.183.7 (74.1 MB)
(Released 8/9/2011) Flash Player 10.3.183.5 (70.6 MB)
(Released 6/28/2011) Flash Player 10.3.181.34 (75.7 MB)
(Released 6/14/2011) Flash Player 10.3.181.26 (75.6 MB)
(Released 6/5/2011) Flash Player 10.3.181.22 (75.7 MB)
(Released 5/31/2011) Flash Player 10.3.181.16 (6.3 MB)
(Released 5/12/2011) Flash Player 10.3.181.14 (70.5 MB)
(Released 4/15/2011) Flash Player 10.2.159.1 (66.3 MB)
(Released 3/21/2011) Flash Player 10.2.153.1 (66.3 MB)
(Released 2/28/2011) Flash Player 10.2.152.32 (38.4 MB)
(Released 2/08/2011) Flash Player 10.2.152.26 (66.3 MB)
(Released 11/04/2010) Flash Player 10.1.102.64 and 9.0.289.0 (126 MB)
(Released 9/20/2010) Flash Player 10.1.85.3 and 9.0.283.0 (126 MB)

How do you plot multiple curves on the same graph when using a while loop?

I am writing a program that will plot the IV Output chracterisitcs curves for a MOSFET transistor. I have two sweep variables Vg and Vd. For each Vg valve selected, Vd is swept from its start to stop voltage creating a graph for that Vg valve. Both of the sweeps are done using while loops. Ideally I would like to display all of the Vg plots on the same graph while having the ability to do real-time graphing. Can anyone help me figure this problem out? I have attached my program. Thanks!!
Tammy
Attachments:
outputfin2.vi ‏165 KB

Hi Tammy & Tica T,
As far as I see it - this thread is a very bad version of already existing bad version......
http://forums.ni.com/ni/board/message?board.id=170&message.id=127857
I expected, that an Applications Engineer from NI knows something about a Transistor and how an Output characteristic looks like !! Take a look to a typical Transistor Datasheet ( e.g. n-channel MOSFET) - you will see, that there is no relation of ID vs Time like in your example ( values vs time ) but IDrain vs VDrain at different VGate's ( no relation to Mr. Bill Gates ).
Find attached a vi, that in general does what you need - drawing of curves vs x-axis (XY-graph in use) - in test_sweep.zip. And that you geet an impression, how it might be done ...... dynamic Output characteristic of a Transistor with Standard Equipment of a Lab ( Scope + Generator + Power Supply ) find in addition a Frontpanel - picture. One of the interesting points here is - the self-heating effect; visible on ch3 of scope - 5µs Pulse is already a very long time...... This measurement was done in order to compare with our own Transistors.........
Hope this helps a little bit to understand, what we are talking about.
Regards
Werner
Attachments:
test_sweep.zip ‏358 KB
dynamic Transistor char.png ‏65 KB

Multiple repeats of the same person when I sync

Each time I sync, my addresses get multiplied. It ends up that I am now up to 6 or more copies for a single individual.
I am syncing two computers, the iphone 4, yahoo, mobile me and gmail.
HELP!

You are probably syncing in too many different ways at the same time: you have to decide whether to use mobileme, itunes, or gmail. I had this problem, since I pay for mobileme anyway I decided to use that. So you have to deselect the sync through itunes and also make sure that your gmail sync isn't doing contacts. Same for yahoo sync.
Then you'll have to clean up the mess. I would suggest cleaning it up on your mac by having it merge duplicates if you have them and then doing a one-time sync back to your phone. Make sure everything that's on your phone is on the mac before you say yes to deleting what's on the phone.

SharePoint 2013 shows the same picture library after add more than two picture library slideshow web part in one page.

The environment is SP2013 with SP1, I had check the KB, but don't have any hotfix about this.
I had try it on the different fram, also the same result.
I try it on sharepoint online is work. So I think that must have hotfix about this.
I find there is someone have the sam problem.
http://sharepoint.stackexchange.com/questions/70944/picture-library-slideshow-issue-with-multiple-libraries
Some snapshot about this :
Vinci Wang

Hi Vinci,
Thanks for posting your issue, This is a known issue in 2013. You could have multiple slideshow
webparts on a page in 2010, but it won't work in 2013. As of now there is no hot fixes for this issue. you can try code mentioned in below URL
https://social.technet.microsoft.com/Forums/sharepoint/en-US/5ca65f7f-770b-4b0f-8e40-d08578a6442b/sharepoint-2013-picture-library-slideshow-web-part-image-not-displaying-correct-size
Also, check out below mentioned URLs to know more about this issue and fixes
http://sharepoint.software.tech.answers.ninja/post/70944
https://social.msdn.microsoft.com/Forums/office/en-US/63b2ce8c-5f31-4a39-934e-6d759e9afa0c/picture-library-slideshow-web-part?forum=sharepointgeneralprevious
http://blog.vgrem.com/2013/04/27/beyond-the-slideshow-web-part-capabilities-in-sharepoint-2010/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Can i use the same socket to connect to more than one servers

hi,
I'm new to java. I want to know whether a socket created using Socket() constructor can be used to connect to multiple servers, not necessarily at a particular point of time. ie, i want to connect to various servers using a single socket and register some info abt them, possible using a loop, one by one. I use connect() method to connect to particular server.
In other words is Socket class is mutable.
Edited by: itsraja on Feb 25, 2008 5:50 AM

In short, I don't think so.
Setting the server name for a socket is in the constructor.
Socket s = new Socket("localhost", 501);I don't believe that there are any functions, such as:
s.setHost("localhost");
s.setPort(501);However, JavaDocs suggests that when you use the no-args constructor, your class becomes an automatic SocketImpl class, but you can't reach any of its variables unless you derive from the class, itself. But that's probably a bigger headache than it's worth.
Now TECHNICALY, if you didn't want to create a new variable, you could use:
Socket s = new Socket("localhost", 501);
s.close();
s = new Socket("remotehost", 502);
s.close();However, this is still creating a new instance and thus a new object in memory.
I hope this answers your question.
Let us know exactly what you're trying to do for a more exact answer.
~Derek

The same SMS messages are showing more than once

Hi,
On my SMS page, my message threads are showing up more than once ,
How would I go about fixing this?

Hello,
Maybe helps you:
*[http://kb.mozillazine.org/Repeatably_downloading_the_same_messages]

The same incoming message shows up more than once. Why?

After deleting message it shows up again in inbox. Time it takes second message to appear varies.
Roy

Hello,
Maybe helps you:
*[http://kb.mozillazine.org/Repeatably_downloading_the_same_messages]

Payment Predictor applying multiple payments to the same Item when customer send more than 1 payment in 1 deposit.

Similar Messages

Maybe you are looking for