Applying the same ActivationConfigProperties to multiple MDBs

Is there a portable way of applying the same ActivationConfigProperties to multiple MDBs?
I think it's typical for many applications to contain MDBs which differ only in the destination name so it should promote ease of use and convention over config to have such a feature, say for JMS 2?
Motivation for asking is:
In Jboss 5.1.0 one could use a container defined AspectDomain to define a set of properties that an MDB inherits and overrides at will. This allowed externalization of config properties as well as reuse. This is no longer available in Jboss 7.1.X. and I found myself having to create an ejb-jar.xml file
that contains
<ejb-name>MDBName</ejb-name>
      <activation-config>
        <activation-config-property>
          <activation-config-property-name>destinationType</activation-config-property-name>
          <activation-config-property-value>javax.jms.Queue</activation-config-property-value>
        </activation-config-property>
        <activation-config-property>
          <activation-config-property-name>providerSpecificProperty.eg.queueManagerHostName</activation-config-property-name>
          <activation-config-property-value>${departmentA.queueManager.hostName}</activation-config-property-value>
        </activation-config-property>
      </activation-config>
...where ${departmentA.queueManager.hostName} is an ant style variable configured in Jboss 7 standalone.xml. There's quite a lot of those provider specific properties that I had to define. Then I had to copy and paste the same configs for all the MDBs I had keeping only the queue name definitions on the MDB.
I'm not really looking for the externalization in this request since that's container specific but putting the properties in one place to apply them to multiple MDBs could be helpful in the spec.
One very crude approach would be to allow wildcards on the <ejb-name> values as is allowed for intercepted classes in interceptor definitions (which would make it a request for the EJB spec rather than JMS?)
Anyone know something I can use now with the current specs that allows definition of config properties at one place and reusing the configs over multiple MDBs?

I've asked around (and checked the EJB spec), but I haven't found any way to do this.
Nigel

Similar Messages

How can I apply the same crop to multiple photos?

It is easy to apply the same Adjust settings to multiple photos by using the Copy and Paste in the Adjust pane. Or by using iPhoto Batch Enhancer.
But can you apply the same crop to multiple photos? I don't see any way to copy a crop. iPhoto Batch Enhancer can do something like it but, being an external editor, it does so on a copy of the photo. I want it on the original photo. (Well, it's not really the original since that one is saved separately in the Library but on the current version).
Thanks for any suggestion.
Bo

Here's how:
1 - bring up the first photo in the edit window and click on the Crop button or *use the "C" key on the keyboard*.
2 - set the crop size/ratio in the menu and position the crop window over the photo as needed.
3 - click the Apply button or *use the Enter key*.
4 - click on the right arrow in iPhoto or *use the right arrow key on the keyboard* to bring up the next photo.
5 - click the "C" key to bring up the crop function.
6 - repeat steps 2 thru 5 for each photo.
This video screenshot shows how:
Click to view video screenshot
Happy Holidays

Applying the same transition between multiple clips

Does any know how to apply the same transition to multiple clips that are all ready in the timeline? I remember attending an Adobe Premiere Workshop years ago and I'm sure they demonstrated that technique. It's would be such a time saver. Perhaps it was a Final Cut Workshop.

Don't you get something like this:
That works perfectly for me. Have you updated to CS4 4.1?

Applying the same effect to multiple clips in a sequence?

I have edited a trailer containing multiple clips in a sequence and I want to add the same amount of sharpen to each clip. Is there a quick way of doing this instead of clicking on each clip seperately and applying the effect, adjusting it and so on....?

If you already have filters applied to the clips, then open the first clip in the Viewer and apply the filter you want - make adjustments as needed. Select all of the other clips in the Timeline that you want to apply the same filter and settings, then drag the filter from the clip in the Viewer to the highlighted clips in the Timeline.
-DH

How do you apply the same transformation to multiple layers?

I've been using PS for years and never had to do this before.
I have a 3D image of a tradeshow exhibit and I want to drop in a lot of different mocks for backgrounds. The 3D is in a slight perspective and I need to transform all the mocks to fit that space.
So how do I link my backgrounds and apply the same "skew" or free transform to all of the layers?
PS version CC 14.2.1 x64

What exactly am I alt+dragging?
My mistake. I was thinking about filters and alt-dragging them to a new layer. For a transform, you most likely will want to make one master SO, apply the transformation, then make duplicates via copy from the layer flyout menu. Then you can replace the content with the other layers.

How can I apply the same filter to multiple inboxes?

I am looking at transitioning from Outlook to Thunderbird -- mostly for the Google calendar integration.
The one thing I am having problems with is the filters. I have multiple email addresses and I would like to be able to apply one filter to all of the email addresses. Ie: I get an email from Bob sent to me on my email address 1 and the email goes to bob's folder. Then I get an email from Bob on my email address 2.
I would like to have the same rule to be effective for both of my email addresses so if bob uses either email address, the mail goes to bob's folder.
Right now it appears that I have to create a unique filter if I get email from 'bob' on email address 1 vs email address 2. Am I missing something?

Nope. Thunderbird's filters are specific to accounts.
You could set them up in one account, then copy that account's ''msgFilterRules.dat'' file to your other accounts.

Is there a way to apply the same bumpers to multiple exports automatically?

Hello smart people.
I have an ongoing project in which I am creating hundreds of 60–120 second clips, all requiring the same intro-outro bumper. Every month I make about 125 of these.
Instead of manually applying these bumpers to each and every sequence, I would love to be able to ask Premiere or Media Encoder to find and attach the specified bumpers as a batch.
Is there a way to do this?
Working with the current updated version of CC 2014 (on a Mac).

What work do you have to do to in a Sequence to create the content between the Intro and Outro?
I assume it varies in length beween 60 secs and 120 secs?
I assume you have to select a clip or multiple clips and edit them to whatever duration in a new sequence for each?
If so...I dont see that its many extra steps to drop a 'Bumper' Nest ( fixed asset in Project Bin) onto Video 1 under the "edit" (Video 2 +) and ripple delete to tighten it up to the content.
Batch Export the Sequences in a Queue.

Is it possible to apply the same transition to multiple edits all at once?

I know it's possible with FCP but is it possible with FCE? I have a bunch of edits I'd like to apply the exact same transition to but would like to avoid doign it one at a time. Unfortunately, selecting all the clips/edits and then dragging the transition to them does nothing.
Thanks.

Hi(Bonjour)
Humm I remember an old trick, check this workaround:
1) Stop your playhead before the first clip, and select all your clips in timeline,
2) drag those clips in canvas, with picture overlay,
3) drop on "overwrite with transition".
4) the default transition will be added between all your clips.
5) open your favorite transition, select the whole sequence in timeline, drag the little "hand" from browser to timeline. All transitions will be replaced by your favorite.
Good luck
Michel Boissonneault

Applying the same effect to multiple clips.

I have a piece of video split into parts on the time line. I'm trying to apply 1/ A continuous time code, using "time code generator" and the "viewfinder" effect.
Is there a way of applying these effects at the same settings to all 3 clips at the same time and also making the time code run continuously?
I've noticed when i apply these 2 effects to the individual clips with all the same size settings, they appear different on each clip.
Any ideas?

If I read your question correctly I would suggest adding the filters to one clip and then copy the clip.
Then highlight the clips you also want those effects on and control-click and select paste attributes and check "filters".
Here's the problem though with you wanting to use continuous timecode. The timecode generator won't deliver what you want if you're cutting and moving clips around the timeline. For that you would want to use Timecode Reader instead

Applying the same 'fix' to multiple clips

Hi guys,
I am sending about 30+ individual sound-clips from FCP to Soundtrack for noise reduction.
My question: How do I apply the filter that I make (or the work I do) on one of the clips to apply to all?
Thanks in advance!

If I read your question correctly I would suggest adding the filters to one clip and then copy the clip.
Then highlight the clips you also want those effects on and control-click and select paste attributes and check "filters".
Here's the problem though with you wanting to use continuous timecode. The timecode generator won't deliver what you want if you're cutting and moving clips around the timeline. For that you would want to use Timecode Reader instead

Applying the same adjustments to multiple photos

hi guys
apologizes in advance, i dont have the manual handy - is there a way i can copy all the adjustments made on one photo and apply it to another?
thanks

I have run into a problem using the Copy & Paste adjustments for multiple photos. If I Copy the adjustments made to one photo, then paste those adjustments onto other photos, they appear to be applied, however when I tried to upload these photos to Flickr I found that the photos uploaded were the originals, not the adjusted versions. When I went back into iPhoto, selected one of these files in question, and selected "show file" I was shown an un-modified version of the photo stored in the Modified folder.
Once I went back in and adjusted all of the photos manually, they uploaded to Flickr properly and when I selected them in iPhoto and requested "show file" I was shown the midified version, stored in the Modified folder.

Using scripting to apply the same formatting to multiple fields

I have four text fields that when a certain checkbox (CompleteClosure) is clicked become required, accessible, and have a red border.
When a different checkbox is clicked, they become not required, readOnly, and gray bordered. My scripting on each box contains many lines:
form1.#subform[0].CompleteClosure::click - (JavaScript, client)
Page1.DivisionalClosure.rawValue =0;
Page2.PartialClosure.rawValue = 0;
//DivisionalClosure and PartialClosure are the other checkboxes
Page1.CompleteDate.mandatory = "error";
Page1.CompleteDate.access = "open";Page1.CompleteDate.border.edge.color.value = "225,0,0";
Page1.CompleteDate.borderWidth = "0.5in";
Page1.ClosureReason.mandatory = "error";
Page1.ClosureReason.access = "open";Page1.ClosureReason.border.edge.color.value = "225,0,0";
Page1.ClosureReason.borderWidth = "0.5in";
Page1.CompleteCode.mandatory = "error";
Page1.CompleteCode.access = "open";
Page1.CompleteCode.borderWidth = "0.5in"
Page1.CompleteCode.border.edge.color.value = "225,0,0";
Page1.ClosureMgr.mandatory = "error";
Page1.ClosureMgr.access = "open";
Page1.ClosureMgr.borderWidth = "0.5in";
Page1.ClosureMgr.border.edge.color.value = "225,0,0";
and this is just for the first checkbox. Is it possible to group these fields or make them a subform and format them with simply:
Page1.CompSubformName.all.mandatory = "error";Page1.CompSubformName.all.access = "open";
Page1.CompSubformName.all.border.edge.color.value = "225,0,0";
Page1.CompSubformName.all.borderWidth = "0.5in";
for some reason all the formatting does not occur when this is done. Is this the right track, or does the coding need to be entered individually for each textfield?
Thanks in advance for any help, I'm new to this and most of the above was crafted from reading helpful info on this site.
Message was edited by: peppemonkey

What about an executed_date field on the table and a "where rownum=1" in the cursor?
proc_a
begin
     begin
          select batch_id
          into b_id
          from batch ...
          where date > xxx
               and date > last_executed
               and rownum = 1;
     exception
          when NO_DATA_FOUND then
               return;
     end;
     exec(b_id);
     update batch
     set last_executed = sysdate
     where bacth_id = b_id;
     return;
end;Bye Alessandro

Applying the same effect or animation to multiple clips with one edit

I'm using FCE4.0.
I'd like to select three clips in the time line and apply the same sizing or Animation to all three clips. Is it possible to do that without going to each clip individually?
As an example, I have three clips with video that fills the screen. I want to reduce the video image to say 50% of the overall window. Do I need to resize each clip? Can't I just resize them all at once? Or apply an edit to them all at once that has the same animation?
Thanks!!

Size/position the first clip. Select Copy. Select the other clips. Select Paste Attributes and in that submenu, select Basic Motion

Can i use the same advertisement to multiple collections?

Can i use the same advertisement to multiple collections?
Advertisment A1 currently linked to collection C1.
Can i use the same advertisement A1 to a collection C2? Because my collection C1 is query based and the C2 would be a static one.
If i use the same A1 advert, will it affect the earlier linked C1 collection i any ways?
System Security analyst at CapG

Well, in 2007 you actually kind of can. You can used linked collections to make C2 a linked sub-collection under C1 and ensure that the advert applies to sub-collections.
Jason | http://blog.configmgrftw.com | @jasonsandys

How do I apply one same transition to multiple slides in one go?

How do I apply one same transition to multiple slides in one go?

After you have done either of the previous options to get the transition on the current slides, you can add the transition to the Master Slide so all your new slides will default to the same transition.

Applying the same ActivationConfigProperties to multiple MDBs

Similar Messages

Maybe you are looking for