Appraisals object type VA and auth object P_HAP_DOC
The system is running 2005 version. While running
APPCHANGE tcode the program ignores values in PD Profile
for object type VA. Furthermore the program bypasses
the check against P_HAP_DOC object. Any hints why this happens? F.ex 2005 IDES system we have performs these checks ok.
Hi Carlos,
The Otype VA - Template, VB- Criteria group and VC - Criterion.
The hierarchy is as follows
VC is blow VB is below VA.
The objects as such wil be created in the HRP1000 as usual.
In addition, there are tables which starts with HRHAP* which holds the appraisal document related data.
But the table contents cannot be seen from SE11 or SE16. Create a SQ01 Quick viewer query for the Database tables.
Hope this helps.
Reward points if it helps you.
Regards,
Subbu.
Similar Messages
-
Hello all,
Can someone tell me the most common used Tcodes, roles and auth objects in SAP APO - DP and APO-SNP security
thanksI was going to type them out but luckily for me found this link to the DP & SNP auth objects - the info there is as detailed as anything else I have seen
http://help.sap.com/saphelp_scm50/helpdata/en/21/f6253b90e48743e10000000a11402f/content.htm
There is a list of useful APO transactions here
http://help.sap.com/bp_scmv241/documentation/SCM_AIO_BP_Function_List.xls
I can't help with the standard roles as I build my own. -
Type Messages and Objects turned from white to black in PDF
When I exported my Keynote presentation to a PDF the Type Messages and Objects turned from white to black. The display in ”Preview” is ok but in Acrobat PDF Viewer it looks black instead of white. Only happens on some slides. I could not find a reason why this happened. Seemed kind of random to me when it happened. But the error was reproducable unless I rebuild it with new silides.
Can you get the exact wording for that error? Is it can't mount iPod?
Also, make sure iTunes is up to date...
iTunes
Finally, make sure your iPod's battery is charged up.
btabz -
Removing Objects O and S from info type 1000 and 1028 in Distribution model
Hi,
My requirement is to remove the objects O and S in distribution model from the filter group of Info type 1000 and 1028.
After removing the objects I perform the below steps:
1. I send an employee (P) through PFAL.
2. Once the employee data is reached to receiver system, then check the employee from PA20.
3. From the Organization Assignment info type (0001), check whether the Org unit and Position text appears on the screen.
Currently after removing the objects O and S, the texts do not flow. But only the org unit and postion id flows to info type 0001, not the text.
Is there any other method or some other configuration to send the texts to the receiver system, apart from maintaining it in distribution model? We want the texts to be displayed in PA20 and PA30 screen for info type 0001 ( along with org unit and position id).
Thanks in Advance.Hi,
the text for O and S are stored in infotype 1000...so PA30 reads them from that table. So if you want to have the texts in the target system you need to send at least infotype 1000. Why don't you want to send it?.
Regards,
Ana -
"" No authorization for number range object type GTIN and activity SHOW ""
While creating number range in number range administration for GTIN system showing the error
"" No authorization for number range object type GTIN and activity SHOW ""
Pls help me to solve this issueHi ,
Please check roles for user assigend as [ This is for super administrator ]
SAP_AIN_ADMINISTRATOR
SAP_AIN_OER_ADMINISTRATOR
SAP_AIN_SUPER_ADMINISTRATOR
SAP_AIN_SUPERVISOR
SAP_AIN_WORKER
and profiles assgined as
SAP_ALL
SAP_NEW
Hope it will helps
Thanks .,
V.Rangarajan -
No authorization for number range object type BTI and activity SHOW
Hi All,
When I try to execute
SAP Easy Access screen - > Auto-ID Infrastructure -> Master data -> Number Ranges -> Number Range Administration
on the next web window when I select the object type BTI , it comes up with the error
Number range table not maintained for object BTI in customizing
No authorization for number range object type BTI and activity SHOW
I am using AIN 5.1 . Is this an authorization issue ?. If so which all roles I should give to the user? IF you have any idea about this please share some tips.Hi Sahad,
Only few number range object types are available in the standard system:
Follow the link for help .
http://help.sap.com/saphelp_autoid2007/helpdata/EN/45/e2240c7abb56dde10000000a114a6b/frameset.htm
Follow the for setting up the others.
http://help.sap.com/saphelp_autoid2007/helpdata/EN/45/e2240c7abb56dde10000000a114a6b/frameset.htm -
No element type defined for object type BSEG and system / Disp Management
Hi all,
I get the error message
No element type defined for object type BSEG and system ...
Message no. UDM_MSG006
when I try to save a dispute case.
What do I have overlooked in config?
Thanks
Hein
Points guaranteed as always.Hi Sai,
I have configured the standard settings in there.
When I add 2 customer-disputed objects from 2 different customers I get that error.
Any solution to this?
Thank you! -
BAPI error for mvmt types 201 and 202
Hi all,
I'm using a bapi BAPI_GOODSMVT_CREATE for the movement type 201 and 202 with the gm_code = '03' for the transaction mb11- Goods movement. But it returns an error u201D Account 400000 requires an assignment to a CO object u201D...I'm unable to resolve this one....I have attached the code below. Please help me in fixing this issue...
if sy-subrc = 0.
loop at it_mchb into wa_mchb.
if wa_mchb-clabs gt 0.
clear wa_header.
wa_header-pstng_date = sy-datum. " fill header data
wa_header-doc_date = sy-datum.
wa_code-gm_code = '03'. "fill code data
clear wa_item.
wa_item-material = wa_mchb-matnr. " fillitem data
wa_item-plant = wa_mchb-werks.
wa_item-stge_loc = wa_mchb-lgort.
wa_item-batch = wa_mchb-charg.
wa_item-entry_qnt = wa_mchb-clabs.
wa_item-move_type = '201'.
wa_item-entry_uom = wa_mchb-meins.
append wa_item to it_item.
elseif wa_mchb-clabs lt 0.
clear wa_header.
wa_header-pstng_date = sy-datum. " fill header data
wa_header-doc_date = sy-datum.
wa_code-gm_code = '03'. "fill code data
clear wa_item.
wa_item-material = wa_mchb-matnr. " fillitem data
wa_item-plant = wa_mchb-werks.
wa_item-stge_loc = wa_mchb-lgort.
wa_item-batch = wa_mchb-charg.
wa_item-entry_qnt = wa_mchb-clabs.
wa_item-move_type = '202'.
wa_item-entry_uom = wa_mchb-meins.
append wa_item to it_item.
endif.
endloop.
clear lv_lin.
describe table it_item lines lv_lin.
if lv_lin = 0.
write : / 'No records found'.
endif.
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = wa_header
goodsmvt_code = wa_code
importing
materialdocument = lv_matdoc
tables
goodsmvt_item = it_item
return = it_return.
if it_return is initial. " if record created successfully
call function 'BAPI_TRANSACTION_COMMIT'. " commit work
write : / lv_matdoc, 'IS CREATED SUCCESSFULLY' color 5.
loop at it_item into wa_item.
write : / 'Mat :', wa_item-material,'bat :', wa_item-batch.
endloop.
else. " if record is not created successfylly
loop at it_return into wa_return.
write : / wa_return-message color 6.
endloop.
uline.
endif.
else.
write : / 'No Records found' color 7.
endif. " gt_s035 is not initial
Edited by: Arunmozhi_06 on May 30, 2011 12:48 PMHi,
Did you passing the leading 0's in the cost center field?
and check the below coding..
* Structures for BAPI
data: gm_header type bapi2017_gm_head_01.
data: gm_code type bapi2017_gm_code.
data: gm_headret type bapi2017_gm_head_ret.
data: gm_item type table of
bapi2017_gm_item_create with header line.
data: gm_return type bapiret2 occurs 0.
data: gm_retmtd type bapi2017_gm_head_ret-mat_doc.
clear: gm_return, gm_retmtd. refresh gm_return.
perform show_status using 'Scrapping(551) Material'.
* Setup BAPI header data.
gm_header-pstng_date = sy-datum.
gm_header-doc_date = sy-datum.
gm_code-gm_code = '06'. " MB11
* Write 551 movement to table
clear gm_item.
move '551' to gm_item-move_type .
move xresb-matnr to gm_item-material.
move p_bdmng to gm_item-entry_qnt.
move xresb-meins to gm_item-entry_uom.
move xresb-werks to gm_item-plant.
move xresb-lgort to gm_item-stge_loc.
move p_grund to gm_item-move_reas.
* Determine cost center per plant
case xresb-werks.
when '0004'.
move '0000041430' to gm_item-costcenter."pass leading zero's in the cost center field
when '0006'.
move '0000041630' to gm_item-costcenter.
when '0007'.
move '0000041731' to gm_item-costcenter.
when '0008'.
move '0000041830' to gm_item-costcenter.
endcase.
append gm_item.
* Call goods movement BAPI
call function 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = gm_header
goodsmvt_code = gm_code
IMPORTING
goodsmvt_headret = gm_headret
materialdocument = gm_retmtd
TABLES
goodsmvt_item = gm_item
return = gm_return.
Maybe there is some config missing for your cost center, or maybe something missing in your code. check above.
Regards,
Dhina,..
Edited by: Dhina DMD on May 31, 2011 8:02 AM -
Account assignment for Movt type 101 and 501
All SAP Gurus,
We want to do the account assignment for movt types 101, 102, 122, 123, 201, 202, 261, 262 accourding to the movement types.
We are aware that the Transaction Key is 'GBB'.
But how to know that which 'General Modification' is used for which movement types.
(in short where we can find this link between movement types and Transaction Key and 'General Modification')
Regards,To know this first you have to know what does the different general modifications means for GBB:
AUA: for order settlement
AUF: for goods receipts for orders (without account assignment)
and for order settlement if AUA is not maintained
AUI: Subsequent adjustment of actual price from cost center directly
to material (with account assignment)
BSA: for initial entry of stock balances
INV: for expenditure/income from inventory differences
VAX: for goods issues for sales orders without
account assignment object (the account is not a cost element)
VAY: for goods issues for sales orders with
account assignment object (account is a cost element)
VBO: for consumption from stock of material provided to vendor
VBR: for internal goods issues (for example, for cost center)
VKA: for sales order account assignment
(for example, for individual purchase order)
VKP: for project account assignment (for example, for individual PO)
VNG: for scrapping/destruction
VQP: for sample withdrawals without account assignment
VQY: for sample withdrawals with account assignment
ZOB: for goods receipts without purchase orders (mvt type 501)
ZOF: for goods receipts without production orders
(mvt types 521 and 531)
You can also define your own account groupings. If you intend to post goods issues for cost centers (mvt type 201) and goods issues for orders (mvt type 261) to separate consumption accounts, you can assign the account grouping ZZZ to movement type 201 and account grouping YYY to movement type 261
Then go and check OMWN.
Regards,
Indranil -
LSMW Upload SalesOrder Creation:problem in assigning Partner type SH and SP
Hi
I'm trying to upload sales order creation data using LSMW -BAPI Method
Business Object : BUS2032
Method : CREATEFROMDAT2
Message type : SALESORDER_CREATEFROMDAT2
Basic Type : SALESORDER_CREATEFROMDAT202
and I'm passing the following header data
Sales Order Type, Sales organisation, Distribution Channel, Division, Sold To Party, Ship To party,
Purchase order number, PO Date, Requested delivery date, Order Reason, Payment terms, Incoterms part1, Incoterms part2, Document Currency.
and the following item data
MATERIAL NUMBER
Order quantity
Storage Location
Item Category
Item Usage
Reason for Rejection
Plant
Net Weight
Gross Weight
Condition Type
Amount
Internal Order Number
I'm assigning the header data to structure <b>E1BPSDHD1</b>
and Item data to <b>E1BPSDITM,E1BPSDITM1</b>
and Partner data to structure <b>E1BPPARNR</b>.
When I am assigning Partner data to the structure E1BPPARNR, I want to assign both <b>sold-to-party</b> and <b>ship-to-party</b> ,(because I have two source fields of this type) but there is only target field related to the partner data , here I am assigning <b>partner type as SP</b> and <b>partner number as sold-to-party</b>, still there is an unassigned field ship-to-party, for this field I am unable to find a relevant target field so please help me how can I assing These two flat file fields <b>(sold-to-party,ship-to-party)</b>
Looking for further more information : if there is many sold-to-party's and many ship-to-party's how can I go that in this situation i.e maintaining Many to Many relationship using LSMW tool
Thanks in advance
regards
RajasekharHere is what you have to do.
In field mapping, double click on the field PARTN_NUMB (or any field of that structure) in change mode. This opens up the code editor. There just enter the following code. I am assuming you are doing only these fields. But if you are mapping more fields of this structure, you have to map them here.
E1BPPARNR-PARTN_NUMB = ORDERHEADER-KUNAG.
E1BPPARNR-PARTN_ROLE = 'AG'.
E1BPPARNR-ITM_NUMBER = '000000'.
*-- add more field mappings here, if needed
TRANSFER_RECORD.
*-- Now pass the Ship-to record
E1BPPARNR-PARTN_NUMB = ORDERHEADER-KUNWE.
E1BPPARNR-PARTN_ROLE = 'WE'.
E1BPPARNR-ITM_NUMBER = '000000'.
*-- Add more partners if needed by copying the above code.
Remember, you need to do TRANSFER_RECORD only that many times as you have the partners. There will be one 'TRANSFER_RECORD' at the end of this structure, so keep that in mind.
Srinivas -
Problem to transform Flat file to Data Type Structurated and map to IDOC
Hi all,
I have a file to idoc scenario.
The information is like this:
1#!445#!AI12#!1#!20070214#!DVXXXXR#!201#!31GINHG876#!#!
2#!#!ETC
3#!000000000030008888#!#!3000#!#!10#!#!20070215
4#!dades45#!b#!c#!d#!e#!f#!g
5#!pos5
where 1, 2, ... = key segments for the file adapter and #! are the field separator.
this must go to a Data Type with substructures like this:
(xml)
.1
......2
.3
......4
......5
where 2 is inside 1 and 4-5 inside 3.
The reason of this is we can get unbounded replays of 3/4/5 for one header.
But XI reads the information like if all segments are headers.
.1
.2
.3
.4
.5
So the IDOC is bad created.
Where is the issue? At Message Mapping all substructures are mapped with his default and at TEST option it works fine.
Thanks in advance for your help.
best regards
Message was edited by:
Federico Martin
Message was edited by:
Federico MartinDear people,
according to license problems at client, it's impossible to get the convert agent.
so now we come back to try to solve with normal mapping.
the next step is try to convert it using 2 message mappings: dt (flat xml) to dt (structurated) and this one to the idoc.
i suppose it can be done adding program at interface mapping.
I created the no hiereachical Data Type for load the information and it's fine. But i am unable to get the first mapping OK, because XI has problems with unbounded segments.
If you agreed and has time, i copy here the information and his structure.
I receive (#! defines separation and key segment fields are 1,2,3,4,5):
1#!445#!AH02#!1#!20070214#!DVPOSTER#!201#!31GINHGIN0#!#!
2#!#!ETC
3#!000000000030008888#!#!3000#!#!10#!#!20070215
4#!dades45#!b#!c#!d#!e#!f#!g
3#!000000000030008888#!#!3000#!#!10#!#!20070215
3#!000000000030008888#!#!3000#!#!10#!#!20070215
4#!dades45#!b#!c#!d#!e#!f#!g
5#!pos5
5#!pos5
5#!pos5
The destination must be:
CHASE A
1 (1..1)
....2 (1..1)
3 (1..unbounded)
....4 (0..1)
3 (1..unbounded)
3 (1..unbounded)
....4 (0..1)
5 (1..unbounded)
5 (1..unbounded)
5 (1..unbounded)
CHASE B
Or, in another case with 5 as child of 3 (like example in last mail)
1#!445#!AH02#!1#!20070214#!DVPOSTER#!201#!31GINHGIN0#!#!
2#!#!ETC
3#!000000000030008888#!#!3000#!#!10#!#!20070215
4#!dades45#!b#!c#!d#!e#!f#!g
5#!pos5
3#!000000000030008888#!#!3000#!#!10#!#!20070215
5#!pos5
3#!000000000030008888#!#!3000#!#!10#!#!20070215
4#!dades45#!b#!c#!d#!e#!f#!g
5#!pos5
1 (1..1)
....2 (1..1)
3 (1..unbounded)
....4 (0..1)
....5 (1..unbounded)
3 (1..unbounded)
....5 (1..unbounded)
3 (1..unbounded)
....4 (0..1)
....5 (1..unbounded)
3 (1..unbounded)
....4 (0..1)
....5 (1..unbounded)
Questions:
How i do for map Data Type (no hierachical) -to-> Data Type (hierachical) and Data Type (hierachical) -to-> IDOC? Is any loop or context object required?
Thank you in advance for your help and sorry the long thread. -
Input type (.plsql) and how to get rid of it.
So, i have two sqldeveloper instances - an older multiplatform one and the second 1.1.2 from rpm. Now it says:
"Addin: Translator PlSql is trying to register a input type (.plsql) which conflicts with translator PlSql who already using this input type"
Just where is this "input type" stored and how can i drop the link to the older one to make the spot available for the newer version?
TIAThanks for replying. Good tip on getting the stack trace...
Permissions on the sqldeveloper directory are rwx - rx - rx.
Here is the dump. I am fairly new to Linux, so does this mean that sqldeveloper could not connect to some external host? I have been able to run apt-get and such in the past.
Thanks again.
Addin: Translator PlSql is trying to register a input type (.plsql) which conflicts with translator PlSql who already using this input type
Full thread dump Java HotSpot(TM) Client VM (1.5.0_11-b03 mixed mode, sharing):
"Automatic check for updates" prio=1 tid=0x085d38c0 nid=0x3209 runnable [0xadcfe000..0xadcff0b0]
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
- locked <0x6f95f9a8> (a java.net.PlainSocketImpl)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.Socket.connect(Socket.java:519)
at java.net.Socket.connect(Socket.java:469)
at sun.net.NetworkClient.doConnect(NetworkClient.java:157)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:382)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:509)
- locked <0x6f95fa48> (a sun.net.www.http.HttpClient)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:231)
at sun.net.www.http.HttpClient.New(HttpClient.java:304)
at sun.net.www.http.HttpClient.New(HttpClient.java:316)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:817)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:769)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:694)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:938)
- locked <0x6f95faf8> (a sun.net.www.protocol.http.HttpURLConnection)
at oracle.ideimpl.webupdate.CheckMasterListRunnable.run(CheckMasterListRunnable.java:147)
at oracle.ideimpl.webupdate.AutomaticCheckForUpdates.checkMasterList(AutomaticCheckForUpdates.java:133)
at oracle.ideimpl.webupdate.AutomaticCheckForUpdates.mav$checkMasterList(AutomaticCheckForUpdates.java:41)
at oracle.ideimpl.webupdate.AutomaticCheckForUpdates$1.run(AutomaticCheckForUpdates.java:87)
at java.lang.Thread.run(Thread.java:595)
"DestroyJavaVM" prio=1 tid=0xadd98d38 nid=0x31eb waiting on condition [0x00000000..0xbfcb3b90]
"Timer-0" prio=1 tid=0xadd6b3d8 nid=0x31fe in Object.wait() [0xade9d000..0xade9df30]
at java.lang.Object.wait(Native Method)
- waiting on <0x6f5e9378> (a java.util.TaskQueue)
at java.util.TimerThread.mainLoop(Timer.java:509)
- locked <0x6f5e9378> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"Log Page Updater" prio=1 tid=0xadd5aec8 nid=0x31fb waiting on condition [0xaf602000..0xaf602eb0]
at java.lang.Thread.sleep(Native Method)
at oracle.dbtools.migration.workbench.core.ui.MigrationTreeTableLogPage$5.run(MigrationTreeTableLogPage.java:622)
"TimerQueue" daemon prio=1 tid=0xb12a6b38 nid=0x31f8 in Object.wait() [0xb0299000..0xb0299db0]
at java.lang.Object.wait(Native Method)
- waiting on <0x6f2629c8> (a javax.swing.TimerQueue)
at javax.swing.TimerQueue.run(TimerQueue.java:236)
- locked <0x6f2629c8> (a javax.swing.TimerQueue)
at java.lang.Thread.run(Thread.java:595)
"AWT-EventQueue-0" prio=1 tid=0x084442c0 nid=0x31f7 in Object.wait() [0xb037f000..0xb0380130]
at java.lang.Object.wait(Native Method)
- waiting on <0x6f21e5d8> (a java.awt.EventQueue)
at java.lang.Object.wait(Object.java:474)
at java.awt.EventQueue.getNextEvent(EventQueue.java:345)
- locked <0x6f21e5d8> (a java.awt.EventQueue)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:189)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
"AWT-Shutdown" prio=1 tid=0x08443328 nid=0x31f6 in Object.wait() [0xb0400000..0xb04010b0]
at java.lang.Object.wait(Native Method)
- waiting on <0x6f243420> (a java.lang.Object)
at java.lang.Object.wait(Object.java:474)
at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:259)
- locked <0x6f243420> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:595)
"AWT-XAWT" daemon prio=1 tid=0x08438018 nid=0x31f4 runnable [0xb0502000..0xb0502fb0]
at sun.awt.X11.XToolkit.waitForEvents(Native Method)
at sun.awt.X11.XToolkit.run(XToolkit.java:463)
at sun.awt.X11.XToolkit.run(XToolkit.java:438)
at java.lang.Thread.run(Thread.java:595)
"Java2D Disposer" daemon prio=1 tid=0x0842b038 nid=0x31f3 in Object.wait() [0xb0599000..0xb0599f30]
at java.lang.Object.wait(Native Method)
- waiting on <0x6f223468> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x6f223468> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at sun.java2d.Disposer.run(Disposer.java:125)
at java.lang.Thread.run(Thread.java:595)
"Low Memory Detector" daemon prio=1 tid=0x080a8110 nid=0x31f1 runnable [0x00000000..0x00000000]
"CompilerThread0" daemon prio=1 tid=0x080a6c00 nid=0x31f0 waiting on condition [0x00000000..0xb20bc798]
"Signal Dispatcher" daemon prio=1 tid=0x080a5b48 nid=0x31ef runnable [0x00000000..0x00000000]
"Finalizer" daemon prio=1 tid=0x0809f348 nid=0x31ee in Object.wait() [0xb2200000..0xb22010b0]
at java.lang.Object.wait(Native Method)
- waiting on <0x6f1859f0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x6f1859f0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=1 tid=0x0809d4d0 nid=0x31ed in Object.wait() [0xb2281000..0xb2282030]
at java.lang.Object.wait(Native Method)
- waiting on <0x6f185a70> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:474)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
- locked <0x6f185a70> (a java.lang.ref.Reference$Lock)
"VM Thread" prio=1 tid=0x0809a8e0 nid=0x31ec runnable
"VM Periodic Task Thread" prio=1 tid=0x080a96d8 nid=0x31f2 waiting on condition -
Characteristics for class type 001 and class 59111 - Message Re-phrased
Hi All,
Let me put in better words.
The requirement is to get the list of Characteristics that are associated with a particular Class type and Class that would be entered by the user in selection screen. I have used KLAH and KSML to establish the link and got the relevant characteristics list configured. It worked for me for most of the Class type and Class combination.
The issue is on particular class type 001 and class 59111, if I put a lookup in KSML, I don't get any records. But if we look in the configuration CL02 for the same Class type 001 and class 59111, I see a list of characteristics configured there.
Does anyone know how to fetch the characteristics on this particular case?
Thanks
Rajesh.
Edited by: Rajesh Kumar K on Jan 12, 2012 12:12 PMHi Sylendra,
Thanks for looking into it and replying with your thoughts.
What you have mentioned about the approach on getting the characteristcs from KLAH and KSML is exactly how I have written in my program. Ofcourse your second statement of going into AUSP to get the values for characteristics for an Object (eg: material number XXXX) is also correct.
But my issue is still on getting the relevant characteristics for the class tyoe 001 and class 59111. I need to display to user the relevant characteristics that are configured for Class type 001 and class 59111. But when I go into KSML passing the internal class number and class type, I don't get any records. If you see, I am not searching characteristic values for an object, I am searching for characteristics itself.
The question would be, why records are not maintained in KSML for class 59111 (though they show in CL03) . or there are any other tables to read characteristics...
Thanks
Rajesh. -
What is the buisness scenario where movement type 291 and 292.
and what is the accounting impact for movement type 291 and 292Hello Amit,
Please go to transaction OLMB->Movement Types and check the IMG documentation from Copy, Change Movement types.
Then you'll see that:
291 Goods issue for any arbitrary account assignment
With this movement type, all account assignment fields are ready for input. You can assign the movement to any arbitrary account assignment object.
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
E, K, P, Q
Example:
If you create a reservation in MB21 trx:
with mov type '201': you will create a reservation against to cost center
with mov type '261': you will create a reservation against to order
with mov type '291': you couldl create a reservation against to cost center, order, wbs, sales order, network.
So by using '291' you can directly perform a goods issue to a specific account assignment.
I hope it helps you.
Regards,
Fábio Almeida
MM Consultant -
Authorisation combined with document type, activity and status
I want to create a role for a user who is only allowed to create and change document type ZDI in status IW .
Which object authorization can provided this check ?
The object authorization C_DRAW_TCD control only the activity (create/modify) and the document type (ZDI).
The object authorization C_DRAW_STA control only the document type (ZDI) and the status of the document (IW).
But I need the combination of the both authorization. Does a possibility exist in standard to do it without create a client new authorisation?
Thanks in advance for your help.
AmandeThanks for your response.
But it doesn't works as I want.
The object authorisation C_DRAW_TCS is checked before the save but not after save with the changed values.
for example :
the user has the following authorizations in the modification role:
C_DRAW_TCS activity 02 document type ZDI document status IW
C_DRAW_TCD document type ZDI activity 02
C_DRAW_STA document type ZDI status IW
The user has also the autorisation C_DRAW_STA document type ZDI status FI in the display role
With this configuration the user can modify the document ZDI in status IW and change the status into FI . I don't want that the user can change the status into FI. Does exist a possibility to avoid this?
Of course, after storing this change of the status , the user can't access to the document ZDI with status FI.
SAP doesn't check the authorization C_DRAW_TCS activity 02 document type ZDI document status FI after status change.
Thanks in advance
Amande
Maybe you are looking for
-
How do you get ITunes to actually uninstall or install new versions when it doesn't like the path for some completely unknow reason. This is on a Windows7 system and by the way a lot of other programs are using this folder without any issues so it i
-
InDesign stops working correctly on some files. Flashing UI and deselecting objects.
I am using the latest version of InDesign (10.0.0.70) on the latest version of Mac OSX (10.9.4). Recently I have been having an issue with InDesign which only affects some documents. The interface sort of flashes every few seconds sort of like the ap
-
Get spawned template name as a string
Anyone know if it is possible to get a spawned templates name? I need to check the validity of a field depending on which template is spawned? so my field might be named P1.template_1.fieldx So im thinking like this: Var r = this template name used /
-
Multicam Project Non-Stop Rendering
I created a multicam clip in FCP X. I synched based on the first marker on each clip. I used a clapboard. I using four clips and they're DV, so I know my system can handle it. (I've used five HDV streams with no problem.) The rendering will not stop
-
Code for put attache file ? on power shell
please help : code for put attache file ? on power shell