Removing Objects O and S from info type 1000 and 1028 in Distribution model

Hi,
My requirement is to remove the objects O and S in distribution model from the filter group of Info type 1000 and 1028.
After removing the objects I perform the below steps:
1. I send an employee (P) through PFAL.
2. Once the employee data is reached to receiver system, then check the employee from PA20.
3. From the Organization Assignment info type (0001), check whether the Org unit and Position text appears on the screen.
Currently after removing the objects O and S, the texts do not flow. But only the org unit and postion id flows to info type 0001, not the text.
Is there any other method or some other configuration to send the texts to the receiver system, apart from maintaining it in distribution model? We want the texts to be displayed in PA20 and PA30 screen for info type 0001 ( along with org unit and position id).
Thanks in Advance.

Hi,
the text for O and S are stored in infotype 1000...so PA30 reads them from that table. So if you want to have the texts in the target system you need to send at least infotype 1000. Why don't you want to send it?.
Regards,
Ana

Similar Messages

What is info type 1957 and where its used?

What is info type 1957 and where its used?

I have used this infotype.
check out this link
P1957 Infotype 1957 - Obsolete, DO NOT USE - SAP Structure - ABAP

HT201274 i want to erase all content and settings from my old iPad and give to my kids. Will I immediately lose all of the apps and content on my iPhone and my new iPad that have the same info as the old one

i want to erase all content and settings from my old ipad and was wondering if the same content will be lost on my iphone and new ipad. all under same apple id

No. Your other devices will be unaffected.
Just tap Settings -> General -> Reset -> Erase all content and settings.

When I try to save, I keep getting the message "The document could not be saved. You don't have permission" - even though I am the Administrator and the Get Info displays "Administrator and (me)".

When I try to save, I keep getting the message "The document could not be saved. You don't have permission" - even though I am the Administrator and the Get Info displays "Administrator" and my_name(me)". Also, when I do a disk permission repair, it always repairs the same applications and files. Last night, I did a disk permission repair twice and both times it took a long time and did the exact same repair both times.

Disk Utility won't repair your home folder. Sounds like your home folder permissions are messed up tho. Try repairing them this way by using Lion Recovery.
1. Restart Lion, and before you hear the chime, hold down the Command and R keys.
2. You’ll be at the Repair Utilities screen. Click the Utilities item in the Menu Bar, then click Terminal.
3. In the Terminal window, type resetpassword and hit Return.
4. The password reset utility window launches, but you’re not going to reset the password. Instead, click on icon for your Mac’s hard drive at the top. From the dropdown below it, select the user account where you’re having issues.
5. At the bottom of the window, you’ll see an area labeled Reset Home Directory Permissions and ACLs. Click the Reset button there.
The reset process takes just a couple of minutes. When it’s done, exit the programs you’ve opened and restart your Mac.
Good luck
RM

[svn:fx-trunk] 10889: Add FTETextTests which check that a Label and NumericStepper configured to use FTEText have a textField and textInput , respectively, of type UIFTETextField and MXFTETextInput.

Revision: 10889
Author:   [email protected]
Date:     2009-10-06 09:29:53 -0700 (Tue, 06 Oct 2009)
Log Message:
Add FTETextTests which check that a Label and NumericStepper configured to use FTEText have a textField and textInput, respectively, of type UIFTETextField and MXFTETextInput. The components are configured via style properties rather than by theme which would require another version/compile of the BasicTests.swf.
QE notes:
Doc notes:
Bugs:
Reviewer: Alex
Tests run: basictests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/tests/basicTests/BasicTests-config.xml
    flex/sdk/trunk/frameworks/tests/basicTests/BasicTests.mxml
Added Paths:
    flex/sdk/trunk/frameworks/tests/basicTests/halo/scripts/FTETextTestScript.mxml
    flex/sdk/trunk/frameworks/tests/basicTests/halo/views/FTETextTests.mxml

I'm also having this problem. I'm using Flash Builder 4.6, AIR 3.4 and I've made a DLL (e.g. ExtensionDll.dll) which needs to call functions in another DLL (e.g. DllUsedByExtensionDll.dll) . I've made sure my ANE is working with the ExtensionDll.dll already, so there are no issues with my actionscript code or my ANE packaging or my DLL compilation. However, once I start calling functions from the other DLL, it starts throwing me Error #3500. Even if I call this function (e.g. abc()) in ExtensionDll.dll, but I never actually use the function from actionscript, and I call another function (e.g. def()) from actionscript, the Error #3500 still appears, so it does not seem to depened on the whether the code is used or not.
It's similar to this problem.
http://stackoverflow.com/questions/9823504/how-to-use-external-dll-in-air-native-extension
Does anyone have a solution or at least a way to debug this?

HT201274 iPhone 4s, but wifi option is greyed out. I want to erase all content and setting from my old 4s and it will not connect to the internet, because the cellular data is no longer connected, bought a iPhone 5c. how do I erase all on my 4s with no in

I have an iPhone 4s, but wifi the option is greyed out. The wifi stopped working on it months ago. Now I wanted to erase all content and setting from my old 4s and it will not connect to the internet, because the cellular data is no longer connected, since I bought a new iPhone 5c. I can't erase my phone by pluggin it into my Macbook Pro, since I can't disable the "Find my iPhone" App without internet. How do I erase all the data and setting on my 4s without connecting to the internet? It is running ios 7

See this https://answers.yahoo.com/question/index?qid=20131119125513AAtRloc
I just did it. To enter DFU mode, I had to use "method 3" on this post
http://thebigboss.org/guides-iphone-ipod-ipad/dfu-mode
Too bad my 4S is 2 years old. Wifi is dead. I had to upgrade to 5S, but 5S is soooooo much faster than 4S so it's kind of good outcome. Without the 4S breaking down, a stingy person like me would have never upgraded the phone.

HT1933 I had £2.07 on my account,I bought a 69p song and you took 49p of my apple account credit and 10p from my bank account and then there is only 49p left on my apple account

I had £2.07 on my account,I bought a 69p song and you took 49p of my apple account credit and 10p from my bank account and then there is only 49p left on my apple account

These are user-to-user forums, you are not talking to Apple here.
If you think that you've incorrectly billed then you can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

TS3212 i am trying to buy a song on itunes and every time i try this always pops up "payment information required tap to continue sign in" and the payment info shows up and them doesnt do anything then i try again and the same thing happens!!! What do i d

Please answer with in the next 5 minutes
Thank You!!

sorry to bother you.. but did you get any tips or answers on how to fix the issue you had in relation to your question.. by any chance.. (TS3212 Re: i am trying to buy a song on itunes and every time i try this always pops up "payment information required tap to continue sign in" and the payment info shows up and them doesnt do anything then i try again and the same thing happens!!! What do i do??)
Sep 13, 2012 5:17 PM

I was using my ipad it was under 10% but no under 4% it turned off then i pluged the charger in and flashed on then showed apple sign after i turned it on. now its going back and forth from the apple sign and battery symbol ive changed chargers its not on

hey please help!
i was using my ipad it was under 10% but no under 4% it turned off then i pluged the charger in and flashed on then showed apple sign after i turned it on. now its going back and forth from the apple sign and battery symbol ive changed chargers its made no differnce its been like 3 hours ive tried to do that reset thing holding lock button and home button for 10 seconds at the same time. WHAT DO I DO?

Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

TS3212 Re: i am trying to buy a song on itunes and every time i try this always pops up "payment information required tap to continue sign in" and the payment info shows up and them doesnt do anything then i try again and the same thing happens!!! What do

TS3212 Re: i am trying to buy a song on itunes and every time i try this always pops up "payment information required tap to continue sign in" and the payment info shows up and them doesnt do anything then i try again and the same thing happens!!! What do i do??Mar 6, 2014 7:07 AM (in response to pdsechser)

sorry to bother you.. but did you get any tips or answers on how to fix the issue you had in relation to your question.. by any chance.. (TS3212 Re: i am trying to buy a song on itunes and every time i try this always pops up "payment information required tap to continue sign in" and the payment info shows up and them doesnt do anything then i try again and the same thing happens!!! What do i do??)
Sep 13, 2012 5:17 PM

Get month and year from date type

Hi all,
I need to get the month and year from the date type.
For example select to_date('2011-01-17', 'yyyy-mm-dd') from dual;Result needed:
01-2011Any ideas?
thanks in advance,
Bahchevanov.

Hello Bahchevanov,
if you need the date to compute something, then you can
TRUNC(SYSDATE,'mm')This will give you a date with the days removed -> 01.01.2011
Regards
Marcus

Remove all time machine backups from a certain date and backward

Right, so here's what I want to do: I want to navigate back to a specific date -- for arguments sake let's say June -- and remove all time machine backups from that date and earlier. Is there an easy way to do so without going through every entry in time machine and "removing backup"?
I want to migrate my time machine backups to a new drive, but realize I don't really need EVERYTHING here since its for an older machine. So what I'd like to do is get my rather large 1.5 TB time machine backup down to a more manageable size and then migrate it to a new drive.

I don't recommend deleting Time Machine snapshots. If you have multiple backup volumes, which you should have, and you need to repurpose one of them, you should just erase it. But if you want to try it anyway, and if you're running OS X 10.8 or later (not any older version), see below.
Don't attempt this procedure unless you have at least one other complete backup of all the data. You should have another backup anyway — one is never enough to be safe.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the "sparsebundle" file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Drag the ones you don't want to the Trash and empty. Sometimes, for unknown and unpredictable reasons, the Trash will fail to empty with a cryptic error message. I don't know of any way to recover from that condition except to erase the backup volume and start over.

For the second time in one week, my dowloaded film stopped and disappeared from Video. apple apologized and will refund me.have some,others the same problem?

My dowloaded films stopped after a while and disappeared from Video. How come can this happen?

I cant explain it but this bizarre "fix" works many times if your videos "disappear". I have passed this on to a number of people and it has worked for them. You can try it if you like.
Go to your home screen and swipe to the right to bring up the spotlight search feature. Type in the name of the movie that you were watching. If the movie appears in the search, tap on it to begin playing. If it plays, let it go for a few minutes and then hit the done button to stop it. Then go back to the Videos App and see if the movies and TV shows have reappeared.

I purchased bad boys 1 and 2 from the itunes store and they would not play so i restarted my laptop and now they are not on my itunes

i purchased bad boys 1 and 2 from the i tunes store but they would not play so i restarted my laptop and now they are not even on my itunes

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Delete the songs and redownload:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I used the migrator utility to transfer music and picture from my old PC and now I have 2 accounts on my new Mac, how can I get back to one account and still have the music and photos transfered ?

I used the migrator utility to transfer itunes and photos from my old PC to my new Mac and ended up with 2 accounts on my new computer. How do I transfer the music and photos and only have the 1 account on the new Mac ?

That's not easy. The Windows migration tool makes a new user account, and you can't prevent it.
You may be able to transfer what you want manually, but it's not quick or easy. See Transferring files from one User Account to another.

Removing Objects O and S from info type 1000 and 1028 in Distribution model

Similar Messages

Maybe you are looking for