Appraisals & training and event management problem

Hi gurus.
I'm trying to configured the integration between Appraisal and Training & Event management (Appraising a Business Event and Attendee Appraisal
I set an attribute HAP00 REPLA = A .
But two problems occurred.
1.
The definition of Appraisal catalog for employees is no problem. But I have a problem with definition of Appraisal catalog for Business event and for Attendees.
Through the definition of Appraisal catalog via SPRO (Training and Event Management/Recurring Activities/Appraisals/Edit Appraisals Catalog) its possible to create an appraisal templates only for employees (it looks like that, because there is only Category group Personnel Appraisals and its not possible to add new category for example Attendee Appraisal).
Can somebody help me where I can define appraisal templates for Event management or how can I get the Appraisal catalog category groups - Appraising a Business Event and Attendee Appraisal?
2.
I set the attributes SEMIN EVAEV/EVAPA to the values 2/3 in connection with table T77BF.
When I run tcode PV33 or PV34 the matchcode of appraisal templates contains the list of all object type VA. The problem is that when I run tcode PV33 I dont want to see all appraisal templates, but only for appraising a Business Event.
It is possible to configure that so? If yes, how.
Thanks in advance.
Regards

Hi,
1. transaction LSO_CATALOG
Regards and Groetjes,
Maurice Hagen

Similar Messages

Training and event management issues

Hi guys,
i am stucked with some of issue in training and event management...
1. Altough client is using TEM but for frontend they are using ESS.. Now problem is search functionality is not working in system. I am getting 0 result.
2. I can see the catalog properly but when i do the booking for the future course then system shows course is successfully booked but in Training Activities list that course is not appearing and nothing updated in backend and if i do booking for future course in the backend then after that i can see that course in the frontend also. same is happening for cancellation. other functionality like prebook, qualification working properly in the system
3. Client is using Appraisal functionality. i have configured appraisal in the backend but how we can do for frontend.
kindly help me regarding these issue as early as possiblee....
Thanks and Best Regard
Puneet

Puneet
Can you please check SAP Note No. 1440812, 1439690, 1386556
Notes : 1421707, 1408134 ... if these can help.... Hope it helps...
Regarding training activities :
Can you please check the assignment of PERNR with User IT0105...
Also, are you using the customized BSP page ... If yes :
Please create a new BSP page copying from the standard BSP page and then enter the new page in the view LSPAGE_ALIAS_C.
Regarding appraisals in frontend, you will see a link of "perform course appraisal" under completed courses if you have configured this in a correct way.
Best Regards
Chetan

Training and Event Management

Can anyone guide me as how to create Training Events in bulk through SAP? I am getting stuck in all ways.. I am not sure where exactly FIRMLY BOOKED flag is stored coz of which we are not able to develop any programs.. Please guide me if ther is any way available to create Courses in bulk..

Firmly Booked flag is stored in Infotype 1026. If you want to create courses (E) in bulk, use planning Menu (PSVP in Training and Event Management and LSO_PSVP in LSO)
Close the thread if your problem is solved.

Training and Event Management Implementation based on competencies

Dear Friends,
My client is going ahead for Training and Event Managment Implementation. They have a basic requirement to start with and that is :
1) They have done competency mapping for all its employees and they want that the competencies of each employees(along with the skill levels) to be recorded in the system and that has to be the starting point of using Training and Event Management module.
2) They want, if the competencies can flow based on Job/ Position.
3) Some identifier to the competencies, whther it has flowed from Appraisal or any other sources in the Final Training Needs.
Kindly provide me help, as to how I will be able to achieve that and in what Infotypes the data pertaining to Training and Event Managment will be stored.
If u all can kindly share with me the User Manuals and Configuration Docs of Training and Event Management, it will be of great help.
Thank you all.

Hi,
Competencies can be stored as qualifications in PD and then by activation of PD PA intergration can be seen from pa30 infotype 24.
Qualifications can be stored against a Job/Position and are called as the Requirements. They are seen as a separate Tab and to which ever position the person is linked to the corresponding qualifications of the position will appear in the requirements tab.
You can maintain the proficiency and a note along with the qualification when assigned to a person.
Also Appraisals can have qualifications in the template rather than criteria and criteria groups.
Also after training is completed during the follow up we can create an appraisal and transfer the qualifications or simply transfer the qualifications to the employee.
Regards,
Divya

Change CSS colors in PSVI (Training and Event Management) ???

Hello All,
We're implementing Training and Event Management (PSVI). In EPD, the interface has some color issues. Namely, the background and color in a column is so dark, it's very difficult to read. (<a href="http://www.durhamcountync.gov/web_mgt/SAP/PV7I_color_issue.jpg">Screen Capture of Color Issue</a>)
I've searched on CSS, PSVI, Training and Event Management... and found all kinds of things. But, nothing on how to edit these color settings.
Is it through the ITS Theme Editor, an edit of a config/ CSS file on the portal server, edit to ABAP code in R/3? sigh. I'm at a loss.
Thank you for any wisdoms you can provide.
Ian

Hi Rick,
Thank you for your help.
The problem occurs in function module RH_OBJECTKEY_BUILD. Following raise is the problem.
    loop at bor_keyfields where bor_object_type = bor_object_type.
      read table structure_key with key
                               fieldname = bor_keyfields-reffield
                               binary search.
      if sy-subrc = 0.
        bor_objectkey+bor_keyfields-offset(bor_keyfields-ddlength) =
        hr_record_key+structure_key-offset(structure_key-leng).
      else.
*     FATAL ERROR!!!! BusObjectKey do not refer Infotypekey of DDIC!!!
        raise problem_to_build_borkey.*
      endif.
    endloop.
If found SAPNote 1066444 but the recommanted SP is already imported?!
Can you help me??

Internal Activity Allocation in Training And Event Management

Hi,
I am facing a problem while internal activity allocation of attendees in Training and Event Management. When i try to run "Internal Activity allocation for Attendees" i get an error message as " Reference document 1005 could not be found".
I have done all the configuration but even then i am unable to understand the reason for this error.
Plz help
Regards
TS

Hi,
I have resolved the above error. it was due to master data maintainence.
But now while posting i am getting an error that " Activity type XYZ can not be allocated to 2008"
Can someone help with this?
Regards
TS

Getting Training and Event Management Data using IT0031

Scenerio:
One of the Employee Is Retired. Now we hire it again for the same role ( extending its period after posting it as retired).
So the good thing that we can use the IT0031 "Reference Personnel Numbers" to get the desired ITs and found that can get other cutomized ITs by checking in the "Copy Infotype" attribute of IT records.
Now this seems to be valid if we are in the same module
but waht if i want to get this magic "Referencing of ITs" done for the "Training and Event Managment" Data of the employee.
Is it Possible Automatically ... or have to go fro ABAP... (I will not prefer ABAP)...
I hope i have stated the problem clearly ...
Feedback ... need it ASAP ...

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

Workflows in HR: Training and Event Management (BO PDRELA_025)

Hi expert!
I have a problem in the context of SAP HCM Training and Event Management and the generation of a workflow event for BO PDRELA_025!
I have created entries in table T779X (through SWEHR3) as:
E 1001 A025 * BOKF 0 PDRELA_025 REQUESTED
E 1001 A025 * BOKP 0 PDRELA_025 REQUESTED
E 1001 A025 * BOKW 0 PDRELA_025 REQUESTED
E 1001 A025 * CNOW 0 PDRELA_025 DELETEREQUESTED
E 1001 A025 * CPRB 0 PDRELA_025 DELETEREQUESTED
...but as soon as it calls function RH_OBJECTKEY_BUILD, it fails and doesn't create the REQUESTED event.
As the key field for AttendeeID in object PDRELA_025 references OBJEC-REALO, function RH_OBJECTKEY_BUILD tries to find a corresponding field in structure PPKEY to create the object key. As it can't find this field in PPKEY, it fails and doesn't create the REQUESTED event. Is there something I've done wrong?
Can anybody help me please?
Michael

Hi Rick,
Thank you for your help.
The problem occurs in function module RH_OBJECTKEY_BUILD. Following raise is the problem.
    loop at bor_keyfields where bor_object_type = bor_object_type.
      read table structure_key with key
                               fieldname = bor_keyfields-reffield
                               binary search.
      if sy-subrc = 0.
        bor_objectkey+bor_keyfields-offset(bor_keyfields-ddlength) =
        hr_record_key+structure_key-offset(structure_key-leng).
      else.
*     FATAL ERROR!!!! BusObjectKey do not refer Infotypekey of DDIC!!!
        raise problem_to_build_borkey.*
      endif.
    endloop.
If found SAPNote 1066444 but the recommanted SP is already imported?!
Can you help me??

Regarding Event Appraisal Functionality in Training and event management

Hi TEM gurus,
Client requirement is that an employee can give feedback for faculty daily. Suppose there is an event for 30 days and there are 5 instructors for this event. Now employee has to give feedback for all the instructor and day wise.
Is it possible for an employee to give feedback daily and for different instructors in training and event management ? How we can track the feedback given by the employee for different instructors day wise ?
I have given value as "A" in switch HAPP00 REPLA in T77S0 table. We have created different templates through OOAM.
While doing appraisal also i have to select employee individually and give event name again. Is there any way by which system can select all employees an event ID ?
kindly help me as ealry as possible.
Thanks and Best Regards
Puneet

Hello Puneet,
Regarding your query on appraisal for every day of the business event, I am not sure if that's possible as it's the business event appraisal we are talking of here..and not the day. But I think individiual instructor appraisal should not be a problem.
Hope this helps.
Best Regards.
Karan.

About LSO and Training and Event Management

Hi Experts,
Greetings!
Please let me know what is LSO and what is the concept of LSO.
Please tell me the roll of SAP HR Functional Consultant Role in LSO.
Thanks in advance.
Regards,
Ram

Hi,
LSO is learning solution
it is an extension of training and event management, however its application HCM_LEARNING is web based.
Where an employee can prebook,book and cancel courses from ESS, also the approvals if required can be taken care by workflows.
Learning solution can further be described as
E-learning - Web based trainings where the e-learning applications are picked from content server onto portal from the application.
Learning- Which involves just booking/cancellation of courses be it web or classroom, and an administrator can also do the same on employees behalf through lso_psv1 and lso_psv2 and so on.
As a functional person the configuration of the prebooking/booking/cancellation activities have to be configured and their corresponding processes.
then followup activities of transfer of qualifications and appraisals and feedback on completion of courses, the config of the same.
Initial preparation of the training catalogue.
configuration of costs for trng/requirements of trng
checks at any stage if required.
and if web based trng then indexing of the same in content server.
Regards,
Divya

Business Event Brochure in Training and Event Management?

Hi Guru's
My client has a requirement as follows. The training administrator decides the Business Event Types which for which superiors can book their subordinates or not. Those events are stored at a particular place. Once the administrator stores them, a mail should be triggered to all the superiors. Thus superior can have a list of event types for which he can book his subordinates. When he books for such events, a mail should be triggered to his subordinates regarding the training event. If an employee books for an event, a mail should be triggered to his superior for approval.
How is this possible? According to me, those events will be "Included in Brochure" (in Business Event Type Infotype). Am I right?
Please suggest me.
Points assured!
Thanks in advance.

Hello ,
see the links it might help :
Business processes of Training and Event Managment
Training and Event Management
Lots of workflow

TEM and FI/CO (Training and Event Management)

Hi All,
I wish to track actual cost per event in PE (TEM - Training and Event Management). Was considering having a Internal order per Instance of event. Have any Idea on how to set up something like this?
Appreciate all ideas,
LB

Hi Dean,
using internal orders you have to consider that sending and receiving cost center have to in the same company code.
If you do not want to distribute the costs to FI/CO but only report them, you can use the cost items provided by TEM. We have set up something similar for our plants in South Europe.
We have created some cost items and fill them manually with the training costs. Additionally we have created a report that evaluated this costs and combines them with the employee costs (derived from salary).
Best regards
Michael

Course Catalog in Training and Event Management

Hi TEM Gurus,
My client wants that users can see only courses of training and event management business catalog in ESS, they can't book or do any activities related to TEM. How we can put restriction for that requirement. We are using ITS services PV7I and PV8I.
Could you please update me as early as posisble ?
Thanks and Best Regards
Puneet

Hi Dear,
Thanks a lot for quick reply. Could you please give me details inofmration .. How to do changes in the system..
How to disable book and cancel functionality from the portal.
Thanks and Best Regards

PMS and Training and Event Management

Hi Gurus,
Our one the of the client implementing PMS and Training and Event Management.
Could anyone suggest me what are the questions need to be asked in initial meeting with the client.
and if anyone has configuration documents on PMS and Training and Event management please forward to me,
my id would be [email protected]
Regards,
Rajesh Soma

The prerequisites of PMS is OM and PA is mandatory,
PMS is just like an interaction between the manager and the employees in an enterprise, based
On his work they are going to put some rating etc.
In the standard system employee called as “Appraise” Manager called as an “Appraiser” and Manager’s Manager called as Higher level manager “Part Appraiser “ can be a self-peer & customer they can save & provide their Comments to the “Appraiser”
First you take the requirement form client side what are the process and how Appraisal system in client then you have to prepare one sheet like Preparation ,Planning,Process
for business functions and other check below :-
HCM, Performance Management (Flexible) 01 - SAP Documentation
HCM, Performance Management (Predefined) 03 - SAP Documentation
check below once :-
Tcodes for PMS Basic Setting
OOHAP_BASIC      Basic Appraisal Template Settings
OOHAP_CATEGORY      Appraisal Category Settings
OOHAP_CAT_GROUP Category Group Settings
OOHAP_SETTINGS_PA PA: Settings
OOHAP_VALUE_TYPE Standard Value Lists
T codes for PMS Process
PHAP_ADMIN     Administrator - Appraisal Document
PHAP_CATALOG     Appraisal Template Catalog
PHAP_CHANGE     Change Appraisal Document
PHAP_CREATE     Create Appraisal
PHAP_PREPARE     Prepare Appraisal Documents
PHAP_SEARCH     Evaluate Appraisal Document
start your work with above things any other post here again ......

Regarding training and event management queries

hi experts,
in my company we have ess in which training and event management module is working fine.i need to develop a report in which training booked against employee through tc-psv1 means in sap-r/3 and through ess means tc-pv8i will come.means saggregation for sap r/3 and ess will come.
please help me regarding this.
how will i identifie that training has been booked against employees through sap r/3 or ess on what paramenet we will identifie.
plz help me....
is there any function module;....

solved by own

Appraisals & training and event management problem

Similar Messages

Maybe you are looking for