Appreciation to the staff for all the help

Some people here, myself included, are somewhat annoyed over bugs etc in Edge. That´s fair considering we´re paying for a product which I believe not all of us knew was "not fully ready".
With that said, I wouldn´t have gotten anywhere without the help from the staff here, and I want to say that I appreciate the help alot. So thank you.

Hi LARV
Thanks for your words of appreciation. Would like to thank all forum members for informing us all the issues you are facing. EA team is working hard to fix these issues ASAP.
Regards
Vinod Menon
Edge Animate Team

Similar Messages

I want to make a CD that is NOT in alphabetical order, not in artist alphabetical order and not in album alphabetical order... I want to make it the order I want. Can this be done? How? thanks in advance for all your help. Mona

I want to make a CD that is NOT in alphabetical order, not in artist alphabetical order and not in album alphabetical order... I want to make it the order I want. Can this be done? How? thanks in advance for all your help. Mona

cjam732 wrote:
Ed - by sequence of numbers, are you talking about the rectangle with the arrow that sorts by track number? I've tried to follow your directions to Mona but my playlist still gets burned to CD in alpha order. driving me crazy. any other suggestions? thanks, Chris
Chris, The sequence number is the first column of numbers, to the left of the Name column. It always goes 1, 2,3 etc. It is not the same as the Track Number, which has its own column.
As a precaution before burning, make sure that Shuffle is tunred off, and that you right-click the playlist name and choose 'Copy to Play Order" (although technically they should not affect the burn).

I recently received a WD My Book Studio external Hard drive and am installing it but can't figure out what the difference between wd turbo installer 64 and wd turbo installer is. Can someone tell me. Thanks in advance for all your help.

I recently received a WD My Book Studio external Hard drive and am installing it but can't figure out what the difference between wd turbo installer 64 and wd turbo installer is. Can someone tell me. Thanks in advance for all your help.

Oh ok, well that was what the test said prior to reformatting the hard drive. Now, it doesn't find any trouble no matter how many times I run it. That's what has me so confused, everything seems to check out and yet...I can't do anything, not even install the software!

Itunes sync (whatever) failed to install, for all applications - help!

Today I attempted to sync my iPhone 3GS with itunes 3.6.3 (windows) and almost no apps will update or install, including existing ones and new ones. When itunes first came up, it asked me to re-authorize my computer even though this is not a new computer, new iphone, or new itunes library. I re-authorized anyway and it told me that the computer was already authorized. Things I've tried so far: rebooting the iphone, restoring from backup, resetting the iphone to factory settings and reinstall, deauthorizing and reauthorizing the computer, purchasing a new app, all to no avail - new applications fail to install, old applications (as a result of restore) report failure to sync and are removed from the phone. The bottom line is that my iphone appears thoroughly unable to sync any longer. Any advise would be much appreciated.

More information. ITunes error log reports:
The app "(whatever)" was not installed on the iPhone "iPhone" because an unknown error occurred(0xE80000004)
for all add-on apps (e.g. those not installed on factory install), including apple applications.
All such apps on the iphone are stuck in "waiting..." state. Manually deleting them off the iphone and reinstalling via the iphone app store will install them. Interestingly, sometimes it takes multiple tries to delete the apps.
Anyone?

Thanks for all Your Help and Advice

I just wanted to say a big thanks to the forum for advice and help on
technical problems with After Effects.... and a special BIG thanks to
Mylenium and Jonas Hummelstrand.
If you want to see the results The Story of India starts on PBS Monday Jan
5th 9/8c or there are clips on the website: www.pbs.org/thestoryofindia
Cheers!
John Cranmer (aka Jack_Daubs)

Hi Murray
You are not being harsh
I don't mind coding as in the past I have done that with Toolbook, to the level of cinema booking
systems, Director, Flash, and courses in html and C++ and some CSS for Wordpress
However.............
I occasionally crack at Dreamwever and can get most of it but I keep having a problem
with positioning. I have had another crack and still not solving it. It seems I follow the
instructions and unexpected results follow. It seems that not all conditions are
explained in the various instructions but I will keep an open mind that there is something
idisosyncratic to do with myself, or, I am missing something but what. I have not had
any similar problem with other stuff. Admittedly I have been used to a very object
oriented way of doing things whereas DW works in and out of the document flow
but I am not sure that is the problem. I thought I would try a different angle and
put a sequence of baby steps on a forum and see if see what happens when
things went wrong and someone could point it out to me at the stage it happened
so to speak.
In the manual I have it says that DW creates the code for you. As such I thought
well this will save a lot of time. I thought therefore code only needed to be used
incidently or later on. Does it mean then that code is best done by default.
Does this render most of the interface useless.
I admit I don't understand and I don't understand why I don't understand.
incidently I have been advised that it is best to use floats for main layout
Is this right, I have tried them with again strange results.
Regards
fishinabox

Happy New Year everyone, and thanks for all your help & insight this year

Just wanted to thank everyone for all the help & consideration you have given to people who have come to the Forum this year for help & assistance. And the help you have given me, too, when you may not have thought that your answers were helping anyone other than the person who made the initial post.
Tom, Ian, Piero, Alchroma, Michel, Victor, Mitchell, David and others too numerous for me to recall at the moment - thanks so much for your contributions. You make this Forum rock !

Hi(Bonjour)!
+J'utiliserai le français pour vous transmettre mes meilleurs voeux de Nouvel An 2009.+
+Le forum Final Cut Express est fort et amical.+
+Bonne année à notre bon ami fishfillet également....+
I will use the french language to send you my best wishes fore the year 2009.
The Final Cut Forum is strong and friendly.
Best wishes to our good friend fishfillett too...
Michel Boissonneault

To all of you I want to Thank-you for all your help your great

THANK-YOU I just want to say it's nice to have the help with a great bunch of great people I like it when you get honest opinion and you get help that works also you have used the stuff and you know what works and what does not

It is always encouraging to read that someone is pleased with the Forum. Thank you, too.

World of Warcraft: Once and for all. HELP!

I have been having the issue below since the first expansion (Burning Crusade). I have been back and forth between these forums, Blizzard forums, telephone support and email support to no avail.
The issue is as follows: During the game for no apparent reason the entire computer locks up. Sometimes I can still hear sound, sometimes not at all. The only way to do anything is to hold the power button down until it shuts off. Many times after powering down and back up, the game lock up right at the login, sometimes at the character selection or right when I enter the world.
The only temporary resolution (albeit unacceptable) was to delete the Cache and *** folders from the WoW folder. This seemed to work as an immediate fix until the problem happened again. Now it seems with the latest patches and the Wrath of the Lich King expansion, this temporary fix doesn't even work. I even went so far as reinstaling my entire operating system.
Every time I have removed the folders indicated above I have also repaired disk permissions in Disk Utilities and even removed any instance of "blizzard" or "warcraft" from the ~/library/preferences folder as instructed by blizzard.
This is just speculation but I've noticed that the computer locks up when I swing the character's view around too quickly (holding the right mouse button and turning fast). Also, this last time the problem showed itself after adjusting the graphics in the game and being asked to restart it for the changes to take effect. Note that this the ONLY time I have ever set the graphics in settings so all of my previous encounters with the problem have nothing to do with that.
The problem only happens when playing The World of Warcraft. There have been many threads in blizzard with people complaining about the same problem. I'm at my wits end. Currently the came is vanilla (no mods or adjustments to any of the settings) and the game locks up as soon as I enter the world.
System Specs
MBP 17" 2.15 Ghz Intel Core Duo (~2005)
Mac OS X v10.4.11
2 GB 667 Mhz DDR2 SDRAM
ATY, RadeonX1600, VRAM 256 MB, EFI Driver 01.00.086
If someone can help me resolve this I will make your bed for a week. Not good enough? I'm open to negotiations. =) Thanks in advance guys.

In regards to your comments first:
1) I've taken care of the heat issues years ago when I first realized how hot the machine was getting. I purchased a Rain iLAP aluminum pad. Right now the machine is encoding some video recorded off TV and smcFanControl reads that the temp is 90 deg C. The addition of smc is very recent. When I first got it, I set it to 4000 RPM when running WoW. The crash still happened. After that, however, I lowered all of the graphic settings to minimum in WoW and that seems to have cleared the problem up. I recently raised it to a step above the lowest quality and it is still OK.
2) You say investigate the video cards adequacy? How? I'm running on an ATI Radeonx1600 w/ 256 MB of VRAM.
3) What kind of latency? You mean in-game latency?
4) I have 2GB of RAM. How do I know if it is high quality or not. In the System Profiler it shows two 1GB slots both reading Type: DDR2 SDRAM / Speed: 667 Mhz / Status: OK
5) My internet connection is cable using Optimum Online (Cablevision). Normally I'm running on a Linksys wi-fi router, but the problem occured even when I connected and the machine to an RJ-45 cable.
6) I removed all mods and moved all the appropriate folders and the problem was still happening before lowering the graphic settings.
Some new questions:
1) If I had no heat dissipation techniques what would Apple tell me is the optimal temperature that the machine should be running at to avoid damaging it?
2) At what RPM does lowering temp with higher RPMs in smcFanControl become a risk to the integrity of the physical fans?
3) In the past, putting WoW in windowed mode would oftentimes cause the problem to occur immediately. I can't recall if this was after the game was running and the temp would have been higher, but does putting the game into windowed mode cause the comp to crash due to high temps?

Hi for All, Pleeeeeeease help me, Update Air application problem

Hi guys,
I have big adobe-air ajax based application installed in my computer ,I have updated some files in my application, and generate the new(updated) version of the air file and put it in the server .My application size is 300 MB. The problem is that the update framework will download and reinstall all the files of air application(300 MB !!!) ,
Is there any way to reinstall only the updated files of my application without need to reinstall all the files during the update process ????
Regards

Hi Anil,
If you go to RSPLAN there you can go to Portal link (it must be configured properly in system)
In portal there will be wizard where you can easily go step by step and create planning functions and sequences like below:
       1.      You choose the appropriate InfoProvider.
       2.      You create one or more aggregation levels.
       3.      You create one or more filters.
       4.      You create one or more planning functions.
       5.      You create a planning sequence.
       6.      You test the planning model.
which is clearly explained in below link
http://help.sap.com/saphelp_nw70/helpdata/en/43/1d2440301a06f4e10000000a422035/frameset.htm
after doing this you can create a query on aggregates you have created above and then make query input ready i.e planning enabled for keyfigures you want like mentioned in below link:
http://help.sap.com/saphelp_nw70/helpdata/en/43/1d023a41130bd5e10000000a422035/frameset.htm
then you can run query in Analyzer and save it as a work book after proper drilldown which can be used as template.
Hope you understood basic thing, as you going on doing u will know clearly every thing.
Ravi

Thank All Of You For All Your Help!

I am learning so much by reading this board. There is so much information and all of you are so willing to share your knowledge, expertise and what you
have learned.
How in the world did you learn so much about the iPad, trial and error? So many tricks and nuances to make it function better and easier, I am totally amazed.

There are always good and bad on every message board, but I am seeing an awful lot of VERY GOOD, HELPFUL, INFORMATIVE posters here and I am very grateful.
I have been thinking about getting a tablet for a couple of years, did some research, kept hearing people compare various brands to the Apple iPad, "it is almost as good as..." "it is cheaper than..." "it has pretty much the same features as..." that convinced me to go for the gold standard of tablets and I am very glad that I did.

Thanks for all your help

One of the sticks that we in the Mac community use to beat the misguided Windoze brethern with is how we support each other. I posted a request 3 days ago asking for advice in finding a leopard compatible, duplex colour (yes I am a Brit, so I spell it correctly ;-P) laser printer. Forty Six people have read that post but no-one has replied. Is it really such a difficult question?
Happy Holidays

HI,
I don't think it is a problem with not helping you, I think it is more of a problem of no one feels comfortable right now with a recommendation. I have two HP's which really won't work under Leopard. from what I am reading most every printer out there is having trouble under leopard.
while I am not sure if they are available in GB, I suggest U try and look at Kodak printers. good quality and refills are half price of anyone else, plus the cartridges last twice as long.
But I do suggest that maybe U can take your computer to the store when U look for a printer and try it out right there. I am looking to buy new printers but will wait for a few more months until all the vendors get there act together.
Merry Xmas and hang loose.
Norm

Sorry ...this is for all, please help me...copy controls

That is okay, but how to identify which are the Sdocs and Delivery docs the company is using???? what should in the header and item be set...thats what i wanted to know....

transaction code se16n - table name - vbak - execute - in the result screen in order type column all the order types of the existing sales doc will be present.
if its new system n no transaction data - ask the clint what all order types they are using or intend to use and
for deliver - transaction code- se16n- table name LIKP - execute-in del type field u will get the del types being used
rgds
Sai

Once and for all please help compatible headsets with mic 2 use wSkpe

I have been searching, on this Forum about this subject but cannot get a straight answer. I'm tired making my Skype calls using the speaker on my Mac. I got several headsets including one with separate plugs, one for audio and other for mic. It didn't work.
I also was told that I should get any USB based headset. I've seen some advertised including the one at the Apple store, way too expensive. Any suggestion where I could find a compatible headset and which model

Believe it or not, even though I own a 24" I alway try to keep my expenses to a minimal. I posted my question on the Skype's forum and was able to get some help.
I am now able to use the same headset (not usb based) to work, and now I'm using it flawless, and I didn't have to buy a headset from the The Apple Store or Skype. I paid $12.00 at Fry's electronics....

Using iPod as primary storage for all music, help!

Hello all!
Okay, so I bought a 60Gb 5G iPod last month and I'm loving it. However, I'm using it a little differently than most and because of this I'm unable to use many of the conventinal "cures" people have suggested. Here's my situation.
Rather than having my music stored on my computer and then syncing with my iPod I actually store all of my music on my iPod so I can take it back and forth to work with me and play all of my music on my work computer and my home computer. Everything has been going just fine but I've run into a problem with album artwork and the traditional fixes aren't an option.
The problem is that artwork that I've added directly to the iPod isn't showing up on the iPod when I play it when it isn't attached to a computer. I know this is because artwork needs to be added to iTunes and THEN transferred to the iPod.
So, how does someone like myself who isn't managing through music on their computer's hard drive go about correcting such a problem? I don't want to dump everything off of the iPod and back onto my computer, just takes way too long. Can this problem be solved by accessing the iPod DIRECTLY through iTunes?
Thanks!
5G iPod Video Mac OS X (10.4.2)

You're welcome.
Although you haven't seen many reports of iPod hard drive failure, it can and does occur as it can with any hard drive.
Maintaining a regular backup of all important data is very important if not the most important. It isn't a matter of if but when a hard drive has a partial or complete failure since none last forever.
I learned this painful lesson the hard way. Without warning, I experienced a complete hard drive failure on a G3 PowerBook less than one year old and the only time I've experienced this but it only takes once. Apple replaced the hard drive under the standard 1-yr warranty period but none of the existing data was recoverable. I didn't maintain a backup at the time and I lost everything.
Currently I use a 3rd party backup utility called SuperDuper! which creates a complete bootable clone backup of my hard drive saved to a Firewire drive. It includes a Smart Update feature which updates files that have changed only between backups.
I never want to go thru that painful experience again so I emphasize maintaining a backup when I see an opportunity to do so. Always better to be safe than sorry.

Thanks for all past help. New Question.

I am in CS3 Dreamweaver and chose a fixed one column with header and footer. I create a header of
180 px height set main width to 980pxs and create a Spry Horizontal Menu. I cannot get it to fit directly
underneath the header. What am I doing wrong. Thanks. I'll put the page up as
www.tryapage.com/LRE

The border-top worked great !! Thanks so much.
joepd
In a message dated 7/13/2011 1:28:27 P.M. Eastern Daylight Time,
[email protected] writes:
I believe there night be an inheritance issue going on which is causing
that space.
First fix your css (see you have a single quote mark( ' ) after margin: 0
auto' which should not be there and could interfere with the css cascade,
althouth that's not the issue in this particular case.
.oneColFixCtrHdr #mainContent
Once you fix the above add - border-top: 1px solid #fff; - as shown below:
.oneColFixCtrHdr #mainContent
This will collapse any inherited margin/padding which I think is the cause
of your issue.

Appreciation to the staff for all the help

Similar Messages

Maybe you are looking for