Approve Working time Exception : NOT FOUND

Hi friends,
I am getting problem when trying to "Approve Time Sheet data " from MSS. I am not using Work flow but the link given in MSS Team. When i am clicking on the link the first page is comming and i can see the requested working time for approval. But when i click on the review an error occured. the details is:
Exception condition "NOT_FOUND" raised., error key: RFC_ERROR_SYSTEM_FAILURE
From R3 by ST22 i checked the error. Its like...
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED
Exception CX_SY_REF_IS_INITIAL
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_MSS_CAT_APPR_APPLICATION===CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
I can approve the working time from R3 by cats_appr_lite transaction.
Please help.
Thanks,
Sekhar

This pretty much means that the customization is not complete for the CATS Approval profile that you have set for the manager in profile parameters.
Incomplete customization is the cause

Similar Messages

MSS: Approve working time Program "       " not found error

Hi,
I am able to enter working time and release in ESS. CAT2, CAT4 and CAT6 are also working fine. Im using the Approve Time sheet data iView in MSS to approve working time. Im not sure if I did all the required configuration in IMG Approve working time.But when I click the iView I get a Java exception as shown below. Pl find the ST22 dump also. Can you please let me know
1. What could be the problem.
2.What are minimum configuration to be done in IMG Approve working time.
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Program                                          not found., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.cat.approve.blc.FcCatApprove.rfcExecute(FcCatApprove.java:307)
     at com.sap.xss.hr.cat.approve.blc.FcCatApprove.init(FcCatApprove.java:276)
     at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApprove.init(InternalFcCatApprove.java:200)
     at com.sap.xss.hr.cat.approve.blc.FcCatApproveInterface.onInit(FcCatApproveInterface.java:136)
     at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApproveInterface.onInit(InternalFcCatApproveInterface.java:133)
     at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApproveInterface$External.onInit(InternalFcCatApproveInterface.java:313)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
     at com.sap.xss.hr.cat.approve.vac.dd.VcCatApproveDrillDownList.onInit(VcCatApproveDrillDownList.java:
ST22 dump
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
     caught in
    procedure "BUILD_TABLE_STRUCTURE" "(METHOD)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    On account of a branch in the program
    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
    or a transaction call, another ABAP/4 program
    is to be loaded, namely " ".
However, program " " does not exist in the library.
Possible reasons:
    a) Wrong program name specified in an external PERFORM or
       SUBMIT or, when defining a new transaction, a new
       dialog module or a new function module.
    b) Transport error
Regards
Srini

Starting a new thread

Workitems not showing up in UWL of Subsitute for approve working time

Hi All,
We have ECC 6.0, EP 7.0, ESS and MSS BP 1.0 and we have the following requirement.
We are using approve working time functionality to approve deviations for Employees.The approval is done in single step i.e by immediate Line manager .
The Workflow task used in the CATS profile is TS20000460.
The problem is that we cannot receive the substituted Manager's workitems in the substitute's UWL; we can also see the filters which allows us to filter off the workitems for "My Items" and "Items on Behalf Of.....".
Can anyone help me out with what needs to be done . Is there some customizing settings needed or some other workflow task which i need to use.
Thanks a lot,
Manish

Hi siddarth
Thanks for the reply ..
I understand the point and had already tried doing the Substitution from the UWL itself.But the problem is that after doing the sunstituion and making it active we are still not able to recieve the workitems in the substitute's UWL.
Cud this be problem with the Workflow task . If yes please let me know if there is one which i can use or if there is something to be done with the settings and activation of the UWL's .
Regards
Manish

MSS approval Working time

Hi gurus,
We are using MSS 1.0 and EP 7 .I have a small problem.For the approval working Time we are using task TS20000460 task and we modified it based on the requirement of the client .Now we have discovered that when manager approves the time in MSS , the infotypes are updated automatically which the client does'nt want that to happen.Is the MSS approval will work the same way or it's because of workflow.Is there any setting to be done so that when the manager approves it the update will go into the CATSDB table but not the infotypes.
Reply is needed very urgently on this.
Thanks in advance.

Hello,
You need to update the CATSWF transaction not to transfer immediately. Also in the approval profile for the iview SAP_Line uncheck the box to transfer immediate.
Hope this helps and maybe by now you have found your answer.
Maritza

MSS approve working time error?

Hello Friends,
Iam planning to approve working time through UWL using "Approve Working Time " web application. When i click on the workitem to call the web application i get the following error
Exception condition "PROFILE_NOT_FOUND" raised., error key: RFC_ERROR_SYSTEM_FAILURE
Iam new to MSS , what are the settings to be done at the backend
Regards
Sriram

Hi all,
I have maintained the CATS_APPR_PROF parameter in my login ID. and in backend i have used the workflow TS31000006. Time administrator(radiobutton selected), with approval procedure(radiobutton selected), checkbox checked (with sap business workflow) as well as checkbox checked (with auto determination of recipient).
I am applying the overtime from ESS screen. I am able to record, able to release also. i run the CATS tcode in backend i shows my pending overtime approvals, but it is not showing in UWL. I haven't selected the approver in this process as it didn't asked me anywhere. So whose UWL should i check?. wht am i missing???????

Can we approve working time in UWL without MSS web appl?

Hello Friends,
I have a doubt thats bugging me for the past one week, I have a requirement where an employee enters working time through portal and the manager should approve through the portal.
I have configured ESS and also the backend, thus when an employee enters his working time and releases , a workitem is created in the managers inbox at the backend.
I am using the approval reports RCATSB01 for approving working time in the backend.
I am planning to do the UWL config so that managers can access workitems through portal, <b>Can i use this approval report to approve working time in UWL or is it mandatory to use "Approve working Time" web application from MSS</b>.
Regards
Sriram

Hello Ashutosh,
I have given the visualization parameters for task TS31000007
APPLICATION : CatManagerApprove
PACKAGE : sap.com/msscatapproval in SWFVISU
Then followed the UWL config guide and did minimal configration
Created a sytem in system landscape (alias UWL_SYSTEM) and registered in UWL
registered all item types for the system.
Now i can able to see the workitems in the UWL but when i click on the work item Approve working time i get an error
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/uwl/com.sap.netweaver.bc.uwl.uwlSapWebDynproLaunch
Component Name : com.sap.portal.appintegrator.sap.WebDynpro
Exception in SAP Application Integrator occured: Application URL ':///webdynpro/dispatcher/sap.com/msscatapproval/CatManagerApprove;jsessionid=(J2EE17580000)ID0079084450DB21042082377319897423End' is not valid! Please check the protocol and host entries for system 'UWL_SYSTEM'..
Exception id: 03:13_24/07/07_0037_17580050
See the details for the exception ID in the log file
There is already system file com.sap.pct.erp.mss.001 . do i need to do any changes to the config files.
Regards
Sriram

Approve Working Time Error

Hi
We are on EP7 with ECC6.0 as backend.
We are trying to use the Approve Working Time iview in MSS but it gives the following error:
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
The ASSERT condition was violated., error key: RFC_ERROR_SYSTEM_FAILURE
We have maintained the following customizing in backend(
1.Define Approval view: SAP_LINE ( SAP Approval by Line Manager)
2.Define Field Selection for Individual Approval view: SLIN1 and with it Field customizing Field label
Personnel Number , Attendance or Absence Type,Text for Attendance or Absence Type, WorkBreakdown Structure Element, Receiver Order etc.
3. Define Field Selection for Detail View: Attendance, Counter etc
4.Define Profiles and Assign to Views: SAP_Line: Initial View=SAP_Line.
5. Create Rule Groups: SAP Standard( 01)
6 Adjust Webmo feature: Time Sheet Application..assigned rule group: SAP Standard(01)
The Approver is a Manager with A012 relationship with a particular org unit.
Kindly suggest where may lie the problem.....we have a requirement of Collective Approval of Working Times of his subordinates by the Manager.
I would like to add here that we are able to approve Working time requests individually through UWL...but we need to use the Approve Working Time Iview.

Hi
We are using the standard taskTS20000460. But we want to use the Approve Working Time service iview.
When we were using the evaluation path for approving the working time data through A012( Chief) in MSS, we were able to see all the working times recorded by the subordinates of the said Chief( Manager) in the service Approve Working Time itself, we did not necessarily have go to UWL and approve from there....Now after we have made the required changes in the evaluation path and made A002 as the approver, the same iview Approve Working Time has a message that "No date exists that needs to be approved'.
At the same time we are able to view and approve the working time data from UWL of A002.
Is there a change that needs to be done in the service to get it working ? or it this because of some other reason.
Please advise.

About the approval working time

Hi gurus,
I don't know if it's the correct place to post this.We are using MSS 1.0 and EP 7 .I have a small problem.For the approval working Time we are using task TS20000460 task and we modified it based on the requirement of the client .Now we have discovered that when manager approves the time in MSS , the infotypes are updated automatically which the client does'nt want that to happen.Is the MSS approval will work the same way or it's because of workflow.Is there any setting to be done so that when the manager approves it the update will go into the CATSDB table but not the infotypes.
Reply is needed very urgently on this.
Thanks in advance.

As long as the AC adaptor is connected the battery will charge if needed. Maximum battery life, however, is dependent upon having the battery fully charged before use. For more info see:
About Batteries in Modern Apple Laptops
Apple - Batteries - Notebooks
Extending the Life of Your Laptop Battery
Apple - Batteries
Determining Battery Cycle Count
Calibrating your computer's battery for best performance
MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
Battery University

MSS: Approve working times

Dear experts,
a user runs a MSS transaction "Approve working times" but he receives the message: "No data exists that needs to be approved".
The user who runs this transaction is holder of chief position in the organizational plan and one position reports to him.
If the same user runs the transaction "cats_appr_lite" in SAP R/3, records to be approved are displayed.
The MSS user uses the profile "SAP Approval by Line Manager".
Why there are no data displayed in MSS transaction?
Thank you in advance,
Vana Sounta

What about this situation? Manager 1 would like Manager 2 to approve the working time of his staff while away from the office. We setup a substitution in the UWL of Manager 1 to give time approval tasks to Manager 2. Manager 2 receives the tasks as expected. When executing the task (Approve working time) however, the employees from Manager 1 do not appear in the list. I would expect that Manager 2 should see and have the ability to approve the time.
Any thoughts would be greatly appreciated on this type of substitution.
Best regards,
Joe Earley

Airport time capsule not found error message

HI,
My time capsule is blinking orange.
I open aiport, sometimes airport finds the TC, sometimes not.
When not, get message:
"airport time capsule not found"
When TC is found, aiport utitily shows an error with the extended network I am setting up. I press 'edit', the settings all seem good. Re-type passwords etc and update.
The problem remains.
I have updated the firmware. An apple shop near me has reset TC using the recessed button on back of TC, and then I have re-configured at home.
BTW, TC was working fine in my old house with same laptop, so prob not simply a basic user issue...
4 other devices on my wifi network all have reliable connection, visitors' phones and laptops too, so shouln't be a wifi netowrk issue, ie network outside TC.
Any thoughts out there?
HOpe so!
mana

yes, running airport 6.1, OS 10.7.5
OK.. I failed to ask enough questions.. I think your comment it all used to work threw me.
1. You are trying to extend wireless network of what router. This will only work with another Apple router.. the way apple built it is in the family only. So please spell out what is the primary router??
If you did have it working to extend the wireless of a non-apple router in your previous house I simply don't know how.. according to Apple it isn't possible. You can use WDS.. that is slow and reduces everything to G wireless.. that is the only way.
2. When you say in the first post..
4 other devices on my wifi network all have reliable connection, visitors' phones and laptops too, so shouln't be a wifi netowrk issue, ie network outside TC.
I presume if you turn off the TC, these devices still have wireless network because they are connected to the primary router.. not the TC.. again my bad reading.. I assumed they are connected to the TC.
So please spell out the whole network..
Broadband modem.. type, model, make.
Main router.. type model make
Any other network devices.
And how was it setup in your old place and how is it different now.

PO Response approval Work item is not executing from approver inbox.

Hi,
PO Response approval Work item is not executing from approver inbox. After click the approve button system is not showing any error and also work item is not clearing from user inbox. When we checked the status of the work item in SWI1 Transaction is still READY.
Standard Task: TS14508055 - Transfer purchase order response data to purchase order
Business Object: BUS2209
Scenario:
1. Create PO in SRM System, Vendor belongs to SUS System Vendor
2. SUS Vendor creates the PO Response SUS system, POR Value is greater Than PO Value
3. Approval Work item will go to Buyers of purchasing group
4. Buyer trying to approving The PO Response from his approval inbox
Regards,
Surya Sankar

what all buttons do you see when you open the workitem in the approval inbox.
as far as i know , there will only button 'transfer response to purchase order'..
what happens if you click the above button.

Approve Working Time WDA

Hi.
We have just implemented Web Dynpro ABAP based Approve Working Time application (Collective Approval iView) replacing the Java based version.
A manager complains that now he has to go into each and every of his employees recordings to check their daily recording while he in the old Java based version could see everything in one view when he clicked the 'Review' button. Off course this is a setback in usability.
To my question:
Is there any way we can offer the same functionality in the ABAP version so that a manager with a single click can see all daily recordings by his employees?
We are running ECC 6 EhP6 and NW 7.31 SP11.
I appreciate all responses. Thanks in advance.
Thanks and regards
Søren Bessermann

Hi Samuli.
Thank you for quick reply!
I am in doubt though, is MSS add-on an ECC component or a portal component?
Regards
Søren

Time constraint not found for A1001 B007

Hi all,
I have created a role and assigned users to the role and created a workcenter in Po01. While assigning the workcenter to the role, its giving a error "Time constraint not found for A1001 B007". I have checked the start date of workcenter is greater than the start date of the role. Please let me know, any config. needs to be done.

Hi!
Check in table T777Z in SM30 or SM31, you will see the time constraint for B007 has not maintained
Simply add new entry and fix it. Then you can get rid of this error!
Regards!

My photoshop cc doesn't work. "_crtCreateSymbolicLinkW not found in DLL "C.\Windows\SYSTEM32\MSVCP110.dll"". Please help

my photoshop cc doesn't work. "_crtCreateSymbolicLinkW not found in DLL "C.\Windows\SYSTEM32\MSVCP110.dll"". Please help

I checked my windows 7 pro machine for the module I see many copies if the DLL with different dates two different sizes all are version 11.0.51106.1 so I guess there are 32bit and 64bit versions. Some are in Adobe folders some in Wacom folders ad in two windows folders including system32. I do not know if there is and entry point "_crtCreateSymbolicLinkW" in it.

Approve Working Time in MSS

Hello,
I want to implement "Time Sheet approval" in MSS and I read that it is available as a webdynpro application under the Workset "Team" which should have certain service links in the navigation panel one of which is "Approve Working Times" but the thing is that I do see various overview iviews under the workset but I don't see the service links...how can I get that working ....also how do I configure Time Approval using standard workflow.
Thanks in advance.

Disregard that previous post....I was thinking of another part of MSS that is part of HF still (sorry, working on HF stuff today...haha). now...back to your problem....
In the standard MSS role, you should see:
Manager Self Service (role)
+ Reporting BW
+ Reporting CR
+ Reporting IAC
--> Home (workset)
--> Manager Self Service (workset)
+ Overview (folder)
+ Work Overview (workset)
+ Team (workset)
>Team (webdynpro proxy page)
> Employee information (folder)
> Employee Working Times (folder)
+++ Approve Time Sheet Data
>Performance Mgmt (folder)
>Compensation Mgmt (folder)
etc.
Are you SURE you copied all of this over and have that folder structure? Also, if you open the TEAM (webdynpro proxy page) object (go to it via the delta-link tracer in the role, then select the item in the tracer and pick "show in catalog" to find it and open it).....from the "Display" drop down (next to the row of buttons at the top of the edit screen) pick "Dynamic Navigation". This will show you the "Services" iView. This "Services" iview is what shows all those folders (under the TEAM page in the role laout) as items in the detailed navigation panel. The folder is the "subsection" title and the items in the folder are the actual links (like the "Approve Time Sheet Data" one under the Employee Working Times folder.

Approve Working time Exception : NOT FOUND

Similar Messages

Maybe you are looking for