Apps crashing and connectivity issues with 8.3

Has anyone else been experiencing these issues after updating to 8.3?
- Multiple apps crashing upon startup of the app (according to release notes it was supposed to improve this but made it worse)
- intermittent Bluetooth connectivity when playing music via Bluetooth in a vehicle
- Touch ID intermittently working in app store
I made the switch back to Apple and am regretting it immensely. They put out numerous betas of this update before release and still couldn't get it right. They make millions but seems they need to invest in software engineers more than watch designers that are just imitating what's already been out. So much for innovation. Please get this fixed ASAP

Same here, I have an iPhone 6. After updating to 8.3 the phone started to lag, the battery consumption went crazy, the phone started to overheat and the games started to stutter and freeze for short periods of time. From what I've read on the internet this update is good for 5s or lower models but for 6 and 6+ it's a lot worse. This is unacceptable since Apple has only 5 phone models compatible with iOS 8 and they have all the resources and time to make the things bette.

Similar Messages

Range and connection issues with new WRT400N

I'm having two major problems with my brand new WRT400n. The router is located in the basement and wired to my seven-year-old desktop. Dependent on the router are three laptops located two floors above it.
My first issue is the weaker-than-expected signal strength that my laptop is receiving from the router. The best signals I'm getting for the 2.4ghz and 5ghz configurations are "Good" and "Poor", respectively, which is below the maximum rating of "Excellent". Even when I bring my laptop right beside the router, I'm struggling to achieve an "Excellent" signal strength. The speed and connection are otherwise fine but my neighbor's G router is registering an "Excellent" signal. So for a brand new N router to give weak signals is quite irritating.
The second issue is reliability. I'm consistently losing connection - both wired and wirelessly - every hour. The connection and speed are fine the rest of the time (very quick and stable) but every 60 minutes or so I am forced to reconnect my laptop to get the signal
Any possible solutions to these two common problems? Perhaps some tinkering with the router settings? Any recommendations are welcome and much appreciated.
How does the warranty return policy for Linksys work? If the hardware is to blame how can I send my WRT400N to Linksys? Will Linksys send me a new item?
Much thanks in advance.
Message Edited by NSX-R on 12-31-2009 08:38 PM
Message Edited by NSX-R on 12-31-2009 08:40 PM

I'm in Canada so I have a WRT400N-CA made by Cisco, which may have minute differences with the original model.
Basic Wireless Settings
Configuration View: Manual
5GHz Wireless Settings
Network Mode: Mixed
Channel Width: 40/20MHz
Wide Channel: 159
Standard Channel: 161 - 5.805GHz
SSID Broadcast: Enabled
2.4GHz Wireless Settings
Mixed
40/20 MHz
9
11 - 2.462GHz
Enabled
Also, under the "Advanced Wireless Settings" tab, the 5GHz titles Beacon Interval, DTIM Interval, Fragmentation Threshold, and RTS Threshold have been changed to 75, 1, 2304, 2307, respectively. The 2.4GHz section has been untouched since installation of the router. Basically I searched for settings configurations on this forum and plugged in the values. My connection is slightly more reliable after using these values and installing the firmware; instead the connection dropping once every hour it drops every few hours. I always have to disconnect and re-connect my laptop connection before I can start surfing the web.
Message Edited by NSX-R on 01-02-2010 12:46 PM

CR2008 connectivity issue with BOE Universes(sap and non sap universes)

Hi Experts !!
Recently we tried to build/connect to a Universe in Crystal Reports2008 via 'Make a new connection tab'.
The universes are of SAP BW or non SAP Lying in BOE Servers and we are trying to build reports on them by conncting/utilizing the universes as a database for Crystal Reporting.
Our issue is most of the time we are not able to connect to the Universes and the connectivity blows out by some 'communication Error' thing initially.
While at some other points in time, the connectivity takes us to the Universe and we are able to select few characteristics and key figures from the Universe but the moment we go futher and try to run by pressing 'OK' button it blows out and say' LOGON FAILED'.
Apparantly, it is an connectivity issue with BOE server and from the different blogs it looks like it is a known issue for long.
The proposed issue resolution were like either CR2008 should be SP2 with BOE SP3 or there should be some additional .dll files defined in the paths in case of MSSQL database. None of this applies to us as we are on CR2008 with SP3 and going back to SP2 is probably not a viable option for us, and we are using Oracle as underlying database in this specific case.( i would like to tell you here that we are able to connect to Oracle Database directly though).
We have raised a message with SAP and was just wondering if we do have some solution/workaround already available to this known issue in place please?
Thanks&Regards.
Edited by: AMIT GHILDYAL on Aug 1, 2011 2:41 PM
Edited by: AMIT GHILDYAL on Aug 1, 2011 2:44 PM
Edited by: AMIT GHILDYAL on Aug 1, 2011 3:14 PM

Hi Amit,
Moved to Universe Forum.
If you have a case logged then no point posting here also, this is a public site and not a case management tool.
Once you do get the solution from your case please post it here also to help others if they have the same problem.
Thank you
Don

Fed up with speed and connection issues since exch...

Last Monday BT done some upgrade work at our local exchange. From that point onwards we have had speed and connection issues.
I use a Belkin G Router rather that the Homehub some that we can run a printer through it and that is plugged in to telephone socket via an extension. But before we blame any of that we have gone back to the Homehub2 so we could see the difference and there is very little.
We live in the countrside so broadband speeds are not great in any case. About 1.8 mg I guess but we have always had no problems. It was good enough for us and we could watch Iplayer.
I was getting fed up with drop outs and speed and yestereday an Openreach guy came out tested everything could not find any problems apart from speed. He made some calls and was told our band width had been capped. He had that removed and yesterday evening speed was a bit better.
Today just as bad again.
Details from router:
Date/Time          January 25 2012 , 21 : 14 : 25
Version Info
Runtime Code version F5D7633-4Av1_UK_1.00.009
Boot Code Version          1.0.37-5.15
Hardware Version           V1.0J3
ADSL Modem Code Version        A2pB015c6
ADSL
Type
Status   No Defect
                Downstream      Upstream
Data rate             287         440
Noise margin     32.3        18.6
Output power   14.8        12.7
Attenuation       58.5      28.9
Figures from speedtester BT
Download speed: 180 Kps
acceptable range speeds is 100 - 250 Kps
DSL Connection rate 286 Kps (DOWN_STREAM) 440Kps (UP_STREAM)
Upstream Test
Upload Speed 346 kps
Upstream Profile 440Kps
Any help would be appreciated
Solved!
Go to Solution.

Hi Welcome to the forums
Your high noise margin will have a major impact on your speed
If you post the full stats from your router
For homehub – type 192.168.1.254 into your browser
Navigate to ADSL Settings or use the A-Z at the top right of the home page and scroll down to ADSL Settings and click on it
Click on More Details and then post the full results.
also post the full results from http://speedtester.bt.com/
Have you tried connecting to the test socket at the rear of the master socket
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
also you could try the hints given by poster RogerB in this link they may help http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
Then someone here may be able to help and offer more advice.
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

TS3694 I tried to update my iphone 3gs from ios 5 to 6 but because of software crash and while restoring with ios 6 it is not activated. Now I degrade it in ios 4 and can not use any app. How can I update this iphone?

I tried to update my iphone 3gs from ios 5 to 6 but because of software crash and while restoring with ios 6 it is not activated. Now I degrade it in ios 4 and can not use any app. How can I update this iphone?

Downgrading the iOS is not supported, and likely has caused the problems you are experiencing.
You'll need to go elsewhere for support.

Hi have the ipod touch and having issue with the reminders app. do not have the reminders page just the completed page

hi have the ipod touch and having issue with the reminders app. do not have the reminders page just the completed page

The problem has been fixed with the most recent OS X software update.

My Safari keeps crashing and coming up with an error that says CrystalDVDto.png caused Safari to quit unexpectedly. Any suggestions on how to resolve this issue?

My safari just started crashing and coming up with an error that says CrystalDVDTo.png forced Safari to quit unexpectedly. I am not sure what to do or even what this is. I have done various searches for this plug-in but cannot come up with much. I went to Help>Installed Plug-ins and nothing appeared. What can I do?

You’ve been infected with the “Flashback” malware. See this Apple support document:
About Flashback malware
Back up all data, if you haven't already done so.
Select  ▹ Software Update to install the latest Java update, as well as any other updates available for your system. That should clear the infection.
Change every Internet password you have, starting with banking passwords. Check all financial accounts for unauthorized transactions. Take this step only after you’ve secured your system in the preceding step, not before.

Why can't i view my photos, whenever i try to look at my photos the app crashes and i've tried everything

why can't i view my photos, whenever i try to look at my photos the app crashes and i've tried everything

Hello Andra,
It sounds like you are not able to access the iTunes and App Stores on your iPod touch. I found an article with steps you can take to address issues like this. The steps in this article address both the iTunes and App Stores:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thank you for using Apple Support Communities.
Best,
Sheila M.

Connection issues with Safari 3

I'm having some connection issues with Safari 3.
When I connect wirelessly, Safari won't load any web pages. I go and use Firefox and everything is just peachy.
I've reset Safari, emptied the cache and whatnot. I went in and checked the permissions, everything checks out.
When I connect with Ethernet, there's nothing wrong, which is my dilemma.
Help would be greatly appreciated.

There are a number of posts in the Leopard forum from people with direct experience with upgrading from Panther to Leopard. Here is a relevant thread from there that should reassure you.:
http://discussions.apple.com/thread.jspa?threadID=1418714
Your system should be fine for Leopard, but you will probably need a current version of Photoshop if you don't already have it. See this download:
http://www.adobe.com/support/products/pdfs/leopardsupport.pdf
Also, Leopard doesn't run Classic (OS 9) apps.
One caveat - first make a bootable backup "clone" of your present system onto an external firewire drive so you can recover if anything goes wrong. You can use the "Restore" tab of Disk Utility to make such a clone, and there are also Panther-compatible versions of Carbon Copy Cloner (v 2.3) and SuperDuper (v 2.1.4), both excellent for this.
It's even possible to a create second Panther clone on a different external volume to create a "dual-boot" system, using that volume to continue to run old applications that you can't run with Leopard.

My laptop recently crashed and is unsalvagable with my itunes library on it. My ipod touch has all of my music still on it. Is there a way that I can put the songs on my ipod onto itunes on my new computer??

My laptop recently crashed and is unsalvageable with my itunes library on it. My ipod still has all of my music still on it.
Is there a way that I can put the songs on my ipod onto itunes on my new computer without loosing them or having to buy them all over again?

Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your iPod for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device

My iPhone opens up my app (clash of clans) it loads half way then the app crashes and closes HELP!! And yes I have updated the game :(

My iPhone opens up my app (clash of clans) it loads half way then the app crashes and closes HELP!!

Hello, Dirk.j.fourie2525.
Thank you for the question. I have had issues with third party applications myself and I will do my best to help you. I am attaching an article below that covers most troubleshooting steps for third party applications.
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
If you are still experiencing the issue after processing the steps in this article, you may have to contact the developer of the application to report an issue.
Cheers,
Jason H.

App Crash and Hang Problem

My App is already on store. It is 'File Locker' named App. It is for Windows store 8.1 only.
Users are complaining that the App crashes and so they loose their files. They are not able to open/see the locked files anymore in the App. Some Can't even see the main page of the App after crash.
These are some failure names I got from App dashboard:
APPLICATION_HANG_ACTIVATION
CLR_EXCEPTION_System.IndexOutOfRangeException
CLR_EXCEPTION_SYSTEM.UNAUTHORIZEDACCESSEXCEPTION
Can anyone please tell me what should I do in order to fix these issues?
As in my PC, the App is running fine,without any problem.
And According to the reviews and rating, I found out that the App is working fine with some while others are getting hell of the issues.
Please give suggestions.

Hi Dev06,
Per my understanding, the windows dashboard may has a channel to get the crash dump. Try getting it and use tool to analyze this dump file. See how to analyzing crash reports in windows store app.
https://msdn.microsoft.com/en-us/library/windows/apps/jj933262.aspx.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.

My iPhone 5 won't let me use my apps until I connect them with iTunes after downloading ios7. Solutions?

My iPhone 5 won't let me use my apps until I connect them with iTunes after downloading ios7. There's just a thing that pops up and says that in order to activate banners and push notifications I have to connect the app with iTunes. The thing won't go away no matter how many times I push ok, and it doesn't give me another option. Solutions?

Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck!

Connection issues with EA4500

I had bad connection issues with my mobile device, so i pressed reset on my EA4500 router, and now when i connect to my network, it gives my limited connection even though i have 5 bars of signal. Not sure what to do now...

Resetting the router will erase all the settings you configured on the router since the initial setup. You manually configure the router's wireless settings so your wireless devices can have internet access again.
Procedure: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cfb50c0dc992443ab2405a782cca60f7_19073.xml&pid=80&...
Make sure to use a computer that is hardwired via Ethernet cable to the router.
For bad connection issues: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cf6ed888ce144d06905af4987887fd1b_KBxxxx_EN_v1.xml&...

I have Snow Leopard 10.6.8 on my MacBook. Constantly dropping internet connection or message "error connecting to the network" comes up. No wireless connectivity issues with windows 7 laptop or iphone.

I have a MacBook with Snow Leopard 10.6.8. The last few weeks it has been constantly dropping internet connection, and one of these messages appear on the page: "Safari cannot open this page because the server where this page is located isn't responding" or "Safari cannot open this page because you are not connected to the internet" comes up. I will check Wifi and I am connected. No wifi connectivity issues with iphone or windows 7 laptop, this doesn't happen with either of those devices. I have unplugged and reset router, cleared cache, still happening. Any ideas? Thanks in advance.

Hi BCLor!
Try using the suggested steps in the following article to help you troubleshoot this issue with your Wi-Fi connection:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Apps crashing and connectivity issues with 8.3

Similar Messages

Maybe you are looking for