Apps R12 Warerhouse Management testing issue.

Hi Gurus,
I am planning to do testing of standard cycle of inbound logistics using WMS in R12 environment. As per page 5-3 of Oracle WMS UG of R12, in a note it is mentioned that:
'Oracle requires that all Oracle Warehouse Management related receipts be made through the mobile device.'
In testing laboratory I dont have access to any mobile device. Does that mean I wont be able to execute standard process of WMS fo rthe want of mobile device??
How can I learn WMS then in such a scenrio??
Please provide guidance I am stuck :(
Regards
Pankaj Singh

Bad news...I am just a functional guy as well. But here is what I can share with you of which some might be obvious so I apologize but it should get you to the finish line:
First make sure that MSCA is installed and set up
Make sure that you or whoever is doing the testing has an established log in and assigned MSCA responsibility
If you are running from a windows based pc you have telnet already
Check with your DBA which box your apps might be running on
Follow a nav path of Start>>>Run>>>telnet\BOX NAME
Again your dba should be able to help you with that

Similar Messages

Network Manager Testing Issue

Hi folks,
I have a bit of an issue regarding Network Manager. It refuses to connect despite the appropriate modules being active for all my interfaces (eth0 wlan0). It goes through the motions of connecting and tries for ages then says "network disconnected".
I am fairly certain that I have not done anything config wize (but I am open to suggestions) and this is only happening on my Gnome system (I am currently writing this on my XFCE Netbook). Has anyone had any issues re: the recent network manager upgrade on Gnome?
Cheers,
Scott
P.S. Once people begin to reply, if this is not an issue with the Testing repo, could the mods move this to the appropriate forum so I am not misleading anyone looking for real testing repo issues.

what version of networkmanager? -1 or -2?

Oracle Apps R12 iRec URL Redirection issue

Dear Friends,
We have configured R12 i-Rec in an server and placed in DMZ.
we have made this server as external and we have made the irec responsibilities to external and using the DMZ Server URL we were able to work without any issue.
Now to publish this URL to Interner users with https and Port masking , we have mapped this URL http://abc.com:8020 to https://xyz.com using Microsoft UGC Firewall 2010.
Now from Internet we were able to hit the URL https://xyz.com and could login as oracle application user with the same url https://xyz.com
But when we click any of the irec responsilities (irecruitmnt agency (or) others) which is made external, the page is redirected to the Real DMZ Server URL http://abc.com:8020/OA_HTML/...
and it shows error:
The page cannot be displayed.
I believe it should not happen , throughout the session it has to maintain the same new URL
Please let us know the Fix.
Regards,
DB

Hi;
What is error in apache log file?
Regard
Helios

Font issue in Custom Reports in oracle Apps R12.1.1

Hi Friends,
I am using Oracle Apps R12.1.1. Vision Instance.
i develop custom report (using 10g DS ) and i used Ariel a font and i deployed custom report.it works fine
The same report i opened in report builder and add a new parameter and used the same font Ariel and saved and then deployed but the concuurent report is showing all the columns in symbol(western) font not in arial font.
what could be the issue? the first report shows proper font.Please let me kno the fix
Regards

yes i have used template.fmb only , and am using FND_KEY_FLEX.DEFINE as i mentioned earlier ,
i have not given any where clause -- should we give any where clause to retrieve the data into the combinations(LOV)?It depends on what values you want to retrieve.
i mean my requirement is if i give % and press tab all the valid combinations should be displayed.
its showing no entries found.Did you review 420787.1 referenced above?
Thanks,
Hussein

How to check Internal, Concurrent Manager status in Oracle Apps R12 from fr

Step by step how to check Internal, Concurrent Manager status in Oracle Apps R12 from front end and how to start them.

Richa wrote:
Step by step how to check Internal, Concurrent Manager status in Oracle Apps R12 from front end Concurrent Processing - Concurrent Manager Generic Platform Questions and Answers [ID 105133.1]
and how to start them1) Using adcmctl.sh (from the backend)
2) Using Activate button (from the front-end) -- http://docs.oracle.com/cd/E18727_01/doc.121/e12893/T174296T174302.htm#4334248
Thanks,
Hussein

Issues after installing apps r12.1.1 on IBM AIX server 6.x

hi ,
I have done the single node Apps r12.1.1 installation on IBM AIX 6.x server. I am requesting someone to please help me with the following issues.
1. The installation has happened on a single node..single dir structure /U02/….. At present, I am able to open all HTML pages, but not any form. While opening forms, its giving following error.
FRM 92101: There was a failure in the forms server during startup. This could happen due to invalid configuration.
Please look into the web server log files for details.
2. At present commands and TOPs don’t work (e.g. sqlplus, or $APPL_TOP etc). How they can be setup so that the commands can be run anywhere and cd $XXX_TOP commands can be issued to move to respective TOPs.
3. I ran the adautocfg.sh after implementation. While running, I saw that it configured the XXX_TOPs. But, unable to use them. What else is required to be run? Did I miss out on any other files?
Thanks in advance.
Regards,
Vamshi

Hi,
1. The installation has happened on a single node..single dir structure /U02/….. At present, I am able to open all HTML pages, but not any form. While opening forms, its giving following error.
FRM 92101: There was a failure in the forms server during startup. This could happen due to invalid configuration.
Please look into the web server log files for details.This is a generic error, so please check the application.log file for details about the error.
2. At present commands and TOPs don’t work (e.g. sqlplus, or $APPL_TOP etc). How they can be setup so that the commands can be run anywhere and cd $XXX_TOP commands can be issued to move to respective TOPs.You need to source the application/database env file, $APPL_TOP/APPS<CONTEXT_NAME>.env and $ORACLE_HOME/<CONTEXT_NAME>.env
Please see "Oracle Applications Maintenance Utilities" for details -- Page 1-11/1-12
Oracle Applications Maintenance Utilities
http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121admu.pdf
3. I ran the adautocfg.sh after implementation. While running, I saw that it configured the XXX_TOPs. But, unable to use them. What else is required to be run? Did I miss out on any other files?You need to source the application env file again to set this custom top.
Please see old threads which discuss the same topic.
How to create a custom top in R12
How to create a custom top in R12
CUSTOM_TOP
http://forums.oracle.com/forums/search.jspa?threadID=&q=CUSTOM_TOP&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Wsdl file location in the apps r12 (service created by using the jdevloper)

Hi,
this is issue is related to apps R12.
I want to edit the WSDL file of the smsservice devloped through JDevloper.
as it is working fine in Prod and I want to test it in test envirnment to how from where I will get wsdl file of the service so that I can change the url of the test in the wsdl file.
Please suggest.
harry

Any suggestions. I also would like to knoe the location of wsdl file.

SRKIM: R12: User Management Responsibility click 시 Error 발생할 경우

PROBLEM
R12: "User Management" Responsibility 를 User 에게 Assign 후 click 하면 아래와 같은 error 가 발생합니다.
ERROR
There are no functions available for this responsibility
SOLUTION
User Management Responsibility 의 경우 'Security Administrator' 와 'Customer Administrator' Role privilege 가 해당 user에게 assign되어 있을 때에만 사용 가능 하다.
아래와 같이 assign 한다.
1. SYSADMIN User 로 applications 에 접속 한다.
2. User Management responsibility 를 선택한다.
3. Users web page 를 click 한다.
4. 해당 user 를 find 한다.
5. Update Icon 을 click 한다.
6. Assign Roles button을 click 한다.
7. 'Security Administrator' Role 를 Assign 한다.
8. Apply 후 Customer Administrator Role 도 동일한 방법으로 assign 한다.
9. 해당 user 로 다시 applications 에 접속 후 test 해 본다.
REFERENCE
Note. 734280.1 - UMX Error: 'There are no functions available for this responsibility' And/Or 'There are no valid navigations for this responsibility' when Accessing 'User Management' Responsibility.

Rick,
You do not mention which account you are using to do this - I suspect you are using your own account. What you will notice is that if you login as the SYSADMIN account and use the User Management responsibility, you will be able to succeed :-) In a real world situation, the SYSADMIN account (being a generic one) is typically locked down, so using the SYSADMIN account is not feasible. What you will need to do is to login as the SYSADMIN account (this one time only) and using the User Management responsibility, grant the "Security Administrator" role to your apps account (assuming it is the one you are using). Then logout and login as yourself and you will see that you will be able to do what you need to do. Unfortunately, this step is not documented very well anywhere AFAIK. Pl let us know if this works for you.
HTH
Srini

XML data into Oracle Tables. XML file on Application Server.Oracle Apps R12

Hi All,
My Database version : 11.2.0.2.0
I have an XML file which needs to be loaded into the Database Tables. How ever i do not want to use the XMLTYPE as given below
insert into test1 (
SELECT PrcDate, PmtType, PmtStatus, PmtTypeCount, PmtTypeAmt
FROM XMLTABLE(
'/WFPaymentAck/RejectedDom1ACH'
PASSING XMLTYPE( BFILENAME('ECX_UTL_LOG_DIR_OBJ','wf_test_xml.XML'), NLS_CHARSET_ID('UTF8') )
COLUMNS
PrcDate VARCHAR2(2000) PATH '@PrcDate' ,
PmtType VARCHAR2(2000) PATH '@PmtType' ,
PmtStatus VARCHAR2(100) PATH '@PmtStatus' ,
PmtTypeCount VARCHAR2(100) PATH 'PmtTypeCount' ,
PmtTypeAmt VARCHAR2(100) PATH 'PmtTypeAmt'
Because this way the XML file needs to reside on the DB server.
I am looking into other option of loading the XML file into a CLOB column of a table and reading it from that column.
I did a couple of tests and feel that this way also the XML file has to reside on the Database Server itself. I am not sure if this is correct or if there is any problem with our TEST instance.
++Can anyone let me know if i need to have the XML file on the DB server instead of the Application server to load into a CLOB column of table ??++
++Or++
++Is there any other workaround for me to load XML into Oracle Tables, while having the XML file on Application Server.++
Your immediate help is appreciated. I need to get past this ASAP.
Thanks in Advance.
VJ

1) Are you asking me to create a folder on Database directory which points to a folder on the Apps server ?I suggest creating an Oracle directory object (a database object) pointing to a real location (folder) on Application server.
we DONOT want a hand shake between the DB Server and the APPS server.I don't see where the problem is.
I'm not familiar with Apps R12 but there's no doubt the two servers are already communicating, at least App server should be able to access the DB for the whole thing to run.
As I said :
One way or another, the data has to make its way to the database, there's no workaround to that.How do you imagine the data will end up in a database table if it doesn't come to the DB server?
There's no magical method out there, both servers have to communicate at some point.
About client-server approaches (client being here the App server), you can read about accessing the XML DB repository in the XML DB Developer's Guide : http://download.oracle.com/docs/cd/E11882_01/appdev.112/e23094/toc.htm
Other option : SQL*Loader can load a CLOB, or an XMLType column too
Edited by: odie_63 on 19 déc. 2011 20:22

Error while installing Oracle Apps R12 , on windows server 2003 R2

Hi Experts
While installing Oracle Apps R12 , on windows server 2003 R2, I am getting the following error.
System Utilities
command: cmd.exe /c E:\oracle 12i dump\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
'E:\oracle' is not recognized as an internal or external command,
operable program or batch file.
RW-50011: Error: - System Utilities Availability test has returned an error: 1
======================================================================================================================================================================================================================================================================
File Space Check :
-- database node space checks --
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database System File Directory = F:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Log File Directory = F:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 0.0
-- apps node space checks --
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP = E:\apps\VIS\apps\apps_st\appl
required = 5800.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 2 = E:\apps\VIS\apps\apps_st\appl
required = 2800.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 3 = E:\apps\VIS\apps\apps_st\appl
required = 8400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 4 = E:\apps\VIS\apps\apps_st\appl
required = 3100.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
COMMON_TOP = E:\apps\VIS\apps\apps_st\comn
required = 3200.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Apps ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Tools ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Temp Directory = E:\apps\VIS\inst\apps\VIS_stccspr01\temp
required = 1024.0
actual = 0.0
waiting for expert suggestion.
Thanks
Rahul Srivastava

Hi Hussein
after changing the directory name as Stage12, I am getting error
File Space Check :
-- database node space checks --
Disk space on system acceptable:
Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 200473.43359375
Disk space on system acceptable:
Database System File Directory = F:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 194873.43359375
Disk space on system acceptable:
Database Log File Directory = F:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 174673.43359375
Disk space on system acceptable:
Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 173723.43359375
Disk space on system acceptable:
Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 70373.43359375
-- apps node space checks --
Disk space on system acceptable:
APPL_TOP = F:\oracle\VIS\apps\apps_st\appl
required = 5800.0
actual = 5873.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 2 = F:\oracle\VIS\apps\apps_st\appl
required = 2800.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 3 = F:\oracle\VIS\apps\apps_st\appl
required = 8400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 4 = F:\oracle\VIS\apps\apps_st\appl
required = 3100.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
COMMON_TOP = F:\oracle\VIS\apps\apps_st\comn
required = 3200.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Apps ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Tools ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Temp Directory = F:\oracle\VIS\inst\apps\VIS_stccspr01\temp
required = 1024.0
actual = 73.43359375
also for
System Utilities
command: cmd.exe /c E:\Stage12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
E:\Stage12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
'cl' is not available.
ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
which: no cl in (/usr/bin:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/system32)
RW-50011: Error: - System Utilities Availability test has returned an error: 1
Yes I do have sufficient space i.e . for E: 106 GB and F: 195 GB free space .
Thanks
Rahul Srivastava

One Time Password (OTP) on mobile/email required in Oracle Apps R12

Dear All,
Good Day! Hope you all are doing well.
My management needs OTP on mobile/email for log-in into Oracle APPs R12 for some key users in our Organization.
Let me explain the requirement is detail, When user log-in to oracle apps by entering his/her user name and password then system send an email or send sms on mobile for One time password. When user provide this OTP then he is able to log-in to the Oracle Apps.
Any body have some idea then please guide.
Regards,
Saquib.

Hi,
Based on our experience, if the NTLM error occurs, please check the password.
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to reset TimeZone in oracle apps R12 instance?

Dear
I need to reset TimeZone in Oracle Apps R12 instance. When i ran Oracle Diagnostics,Java system properties report,i found that user.timezone=GMT-03:00.This is the reason showing time on Oracle Application Manager is wrong.
I need to reset to GMT+03:00, how do i reset the timezone?
Please help me.
Thanks
Ateeq

Yes, the date is set properly at the OS level.
TimeZone values are as follows:
Profile Option Name      Site
Client Timezone     (GMT -06:00) Central Time
Enable Timezone Conversions     No
JTF_CAL_DEFAULT_TIMEZONE     4
LE: Enable Legal Entity Timezone -
Server Timezone     (GMT -06:00) Central Time
Service: Default value for Service Request Timezone type List Item     Agent

ESYU: R12 - Order Management를 위한 Multi Org Access Control(MOAC) setup 방법

Purpose
Oracle Order Management - Version: 12.0 to 12.0
Information in this document applies to any platform.
R12의 Order Management에 대핸 Multi Org Access Control(MOAC) setup 방법에 대해 알아본다.
Solution
일반적인 MOAC Setup:
1. HRMS에서 Security Profile을 정의:
a. HRMS Management responsibility 선택
b. HRMS Manager> Security> Profile로 이동
c. Security Profile이 정의되어 있는지 확인 (OM responsibility 혹은 Site level로)
d. 만일 아직 setup 되어져 있지 않다면 Operating Units를 입력
e. 저장
Note: 만일 위 d step과 같이 새로운 security profile을 생성하였다면 concurrent program 'Security List Maintenance'를 꼭 실행해야 한다.
그렇지 않으면 multiple operating units가 OM forms의 LOV에 나타나지 않을 것이다.
이 program은 multi-org access를 validating 하기 위해 사용하는 table에 data를 생성한다.
Navigation: HRMS Management> HRMS Manager> Processes & Reports> Submit Process & Report> Security List Maintenance
2. MO Profile Options setup:
a. MO: Security Profile - 이 profile setting은 MOAC functionality를 활성화 한다.
b. MO: Default Operating Unit - 이 Operating Unit는 OM forms과 report에서 default가 될 것이며, 이를 clear 하거나 변경하기 위해 LOV를 사용할 수 있다.
Keep the MO profiles in sync:
MO: Security Profile은 site와 responsibility level로 setting 할 수 있다.
MO: Default Operating Unit은 site, responsibility, user level로 setting 할 수 있다.
Application이 원하는대로 동작되지 않는것을 발견하면 이 profile options의 setting 값을 확인한다.
3. OM setup:
R12 upgrade 시 OM Profile에서 migrate 된 새로운 OM System Parameters를 확인:
Order Management Super User> Setup> System Parameters> Values
(See <<NOTE 393646.1>>-R12 Readiness Cheat Sheet: Migrated OM Profile Options)
4. Form에서 hidden field 'Operatin Unit'를 활성화시키고 default folder로 저장:
Sales Order and Order Organizer forms
Quick Sales order and Organizer forms
Sales Agreement forms
Pricing and Availability form
Other forms
Note: Sales Order form에서 hidden field 'Operating Unit'를 'Show' 하기 전에 fotm안에 이 field를 위한 공간을 만들어 놓아야 한다.
예를 들면 Customer Number field를 짧게 하거나 Operating Unit field로 이 field를 덮어씌울수 있다.
Reference
Note 393634.1

Hi Larry,
Have you considered adding the exec apps.mo_global.set_policy_context call to your connection's start-up script?
Tools -> Preferences -> Database -> Filename for connection startup scriptNot the most flexible approach, so I'm not sure if it is appropriate for your application, but just a thought. You might create distinct connection names with different start-up scripts for each org_id.
Regards,
Gary
SQL Developer Team

Oracle apps r12 username,password field doesn't appear in arabic interface

Dear all,
I can find the username,password in ENGLISH interface in oracle apps R12 but when i switch to arabic interface i could not find the username,password field.
Can anybody face this issue and can reply to me.
Thanks & regards,

Please post the details of the application release, database version and OS.
What is the application/database characterset?
I can find the username,password in ENGLISH interface in oracle apps R12 but when i switch to arabic interface i could not find the username,password field.
Can anybody face this issue and can reply to me.Do you mean you get a blank page for the Arabic login page? If yes, have you tried to recompile JSP files manually and see if it helps?
Thanks,
Hussein

Migrating a Forms 6i custom application to Oracle Apps R12 custom bolt on

Hi,
I need to migrate an oracle forms custom application built in 6i to sit within oracle apps R12 (Forms 10g) and use Oracle Apps user authentication and session. It could become a custom bolt on to Oracle Apps and might be accessed from a custom responsibility in oracle applications.
a) How easy/difficult is this?
b) What are the challenges or things to look for to do this migration?
Thanks,
Ayyappa

979379 wrote:
Hi,
We have two node architecture for R12.1.1 on windows 2008 32 Bit. One node for Database and the other node for application.
As we are facing a lot of memory issues, we are planning to go for 64 Bit.
I Have already read the document
Migrating Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 [ID 1188535.1]
The doc says in place OS upgrades are not supported....
So my question is...
While keeping the production, how can i migrate using the same servers. Coz my company does not want to buy new servers..
Please suggest.Complete all the steps in the doc for Rapid Clone and other steps, then take a backup of the files after you run preclone and create a trace file for the database. Once you have the backup ready, install a 64-bit version of the OS and install 11gR2 software and restore the files from the backup and complete the migration.
Thanks,
Hussein

Apps R12 Warerhouse Management testing issue.

Similar Messages

Maybe you are looking for