Appv Management Console with https
Hi,
MDOP 2014, Appv 5 SP1 (server)
I have a problem with adding the package from https source (IIS).
All other communications seems to work with server <> clients over the https, so the appvpublish server -url is https.
Import-AppvServerPackage : An unexpected error occurred while retrieving AppV package file. Internet error code: 12030
- The connection with the server was terminated abnormally
ERROR_WINHTTP_CONNECTION_ERROR 12030
The connection with the server has been reset or terminated, or an incompatible SSL protocol was encountered. For example, WinHTTP version 5.1 does not support SSL2 unless the client specifically enables it.
With package source as UNC share or http all works, but when I try to import from the https source, I get above error during package import.
The appv Server-Management event log gives:
There was a problem retrieving the requested package https: //[Server]/[Path]/Application.appv for import. Error message: Exception from HRESULT: 0x80072EFE (as Event ID: 217)
If I drop the ssl away, and use only http, then package goes and works.
What could be the issue?
I suppose there is a certificate trust relationship between the clients and the servers (i.e. the clients trust the issuer of the server certificates).
Are you using the FQDN to connect to the .appv file? Did you enable TLS on the client?
Falko
Twitter
@kirk_tn | Blog
kirxblog | Web
kirx.org | Fireside
appvbook.com
Similar Messages
-
Logon to WebGUI from Management Console with wrong Ports
Hello SDN,
I install the new SAP Management Console on my workstation. It works perfectly exept logon to abap through WebGUI.
If I cklick on to <SAP Logon...> from the context menue of the ABAP instanz, I get a browser with an URL http://<host>:50000/sap/bc/gui/sap/its/webgui. That doesn't work because the Port of ICM is 8000.
How I can setup the right port?
Many Thanks in advance
VladimirHi,
many thanks for your answer, but something is not clear.
I call SAP MC with such URL http://server1:50013/sapmc/sapmc.html
The ABAP System that I want to logon is under the URL http://server2:8000/sap/bc/gui/sap/its/webgui reachable.
If I try to logon from SAP MC I get an URL http://server2:50000/sap/bc/gui/sap/its/webgui
ICM on server1
icm/server_port_0 is setup for HTTP 8000 on abap side(server2). This is ABAP only ERP 6.00 system
ICM on server2
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
icm/server_port_0 is setup for HTTP 80$$
The question is - what ICM use SAP MC in that case?
Where I schould maintene the ICM parameters?
Best regards
Vladimir -
Use port 50013 (Management Console) with User/password
Hello,
I have a problem. We had a security auditory of SAP systems. They have seen that the port 50013 (Management Console) has not any security with user /password.
Is there a way to put a security before the information?
Best Regards.
Pablo Mortera.Hi Pablo
The SAP Managment Console is a UI (Applet) to access the functionality of the sapstartsrv process, This process is used for montioring and administration of SAP instances and listens on port 5nn13 (or 5nn14 for https)
It is expected that you can access the UI without authentication but to carry out administrative functions (which are sapstartsrv webservice method calls) , such as shutting down an instance for example, authentication is required.
By default only the most critical of these web service methods require authentication but the list of protected webmethods can be modified. Please see note 927637 for more details -
Lanuch Remote Access Management Console with a connection to a remote server
I've installed the Remote Access Management Console on my Windows 8 workstation so that I can administer DirectAccess on a Windows Server 2012 server without having to connect to it with Remote Desktop. However, every time I launch the console I have to
click "Manage a remote server" and enter the server name. Is there a way to launch the console with a command-line parameter that opens the remote server automatically?
I've tried running ramgmtui.exe with the name of the server as a parameter, and I've also tried running "ramgmtui.exe /?" but the console doesn't launch at all when called with any of the parameters I've tried.Hi,
Have you installed Remote Server Administration Tools?
You may use Server Manager to Manage another server. Once you add a server, it will be listed in All Servers. So you will never have to enter the server name.
For detailed information, please view the link below,
Manage Multiple, Remote Servers with Server Manager
http://technet.microsoft.com/en-us/library/hh831456.aspx
Hope this helps.
Steven Lee
TechNet Community Support -
Management Console with Multi App Servers (BPC 7 SP06)
Hello everyone,
I recently upgraded to BPC 7 SP06 from 5.1 and was wondering how Management Console suppose to really work...
We have multiple Application Servers running behind load balancer, so when I login to http://<loadbalancer>/ManagementConsole i could "land" on any application server. Management Console itself doesn't tell you which App Server performance counters it's pulling...
There is a setting in the webconfig: <add key="APP_Server" value="<Application Server Name>" />
Does it support multiple servers?
Also, "End Process" button to end running processes without even confirmation - can that be disabled?
Regards,
AkimHi Clinton,
if you have followed the installng guide of 7.5 and the 2 docs about management console, not sure if useful but you can check also if the ISS windows authentication is right, see please http://www.iis.net/configreference/system.webserver/security/authentication/windowsauthentication
Otherwise I would ask to SAP.
Regards
Roberto -
Strange problem with 10G using client installed enterprise manager console
I have successfully installed 10G on our SUSE linux 9.0 server, I have created 6 databases (standard edition of the database) and verified their parameter files, control files, and database files are in different locations --- all done at the server console. I created my DBA account on all 6 databases and logged into each one to verify their function.
I returned to my PC where I have installed the 10G client and where I have used the 8 and 9 enterprise manager console to manage my databases. I got the TNSNAMES file in order for the new databases. I logged into the first database and tested my workstation connectivity successfully , I logged into the second database and it said my password was incorrect. I ended up signing in on the second database with my first databases account password. (it then worked). I got fed up hopping around with the mystery with the password being stored somewhere in the enterprise manager java ? and logged in as system and changed all of my passwords. I then went up to the console and found that the only database that they changed on was the first one.
I returned to my workstation and started creating the data files and users and roles in the first database. I now on either workstation in my office, when logging in as ANY of the six database DBA accounts, can see all the objects I created in the first database.
I went to the server console and logged in and verified that the objects only exist in the first database. For some reason the enerprise manager console is really a problem. I have windows XP. Our database is on 10G but we are not taking advantage of grid control due to budget reasons (one server only).
I have heard there is a url based web management console at: http://serverip:5500/em, but it is not working currently in our environment and it will be up to our sys. engineers to release / open up that port through our DMZ. Ordinarily would this allow the kind of control that the old enterprise manager console would?
Is my installing the grid conrol product going to be "overkill" and not useful for me or should I install it?
Is there an alternative 10G version of the enterprise manager console for simpler environments like mine?
Is there a good explanation why my workstations are presenting "false" cached information above what is really in the database for objects unique to each database - ie: why are my #1 database objects showing up in EMC as objects in all databases and why is EMC managing/storing my passwords.?
I just need to get the best choice to manage my environment.
I know I have asked a lot of questions and I would appreciate any insight from someone who has encountered this before.fixed
- the alias in the TNSNAMES was correct but the actual database "service_name" was the first db - -- a long project / late night oversight. I also went into the sysman\ifiles\ and corrected the entry for the database there too where it had registered the settings for the wrong database. -
11g client enterprise manager console
enterprise manager did not install with installation of 11g client Administrator version. The documentation says that there is a standalone enterprise manager console with 11g client. Does anyone know how to install this console?
There is no longer any oem standalone console in 11g, this is a new feature in 11g. There is a java application named sql developer and the web enterprise manager console, that's it.
- Madrid
http://hrivera99.blogspot.com -
Open SCSM Console with arguments
Hi,
I'm trying to find a way to open SCSM Console with arguments.
I will explain it with an example: we have a tool which keep a track of all incidents that have been escalated to our managers. If a manager is responding on an escalation via email, it would be great, that we can add a link in the mail which immediately
opens up the concerning incident.
I can however not find the option to open a specific incident from a program other then SCSM console.
This should be possible for normal end users who are using SCSM console day-by-day.
Kind regards.Hello Marat,
Thanks for the answer, this is indeed a good starting point. However:
You can only search for Requests (incidents) where you are the affected user. The person who wants to consult the incident, is not always the affected user. In the SCSM Console, you can search for any incident, and even if you are not the affected user,
you can still read the ticket, and that is what I want to achieve.
That is why I asked if it was possible to open the Service Manager Console with arguments. Like for example: I want to open Internet Explorer and navigate directly to
http://www.bing.com/ I can execute this command on my PC: "C:\Program Files\Internet Explorer\iexplore.exe"
http://www.bing.com/
Or when I want to open a remote desktop connection to a specific server I can run: mstsc /v <servername> /f
Is it possible to do a command like this: "C:\Program Files\Microsoft System Center 2012\Service Manager\Microsoft.EnterpriseManagement.ServiceManager.UI.Console.exe" /s 93035d8c-f810-b6c6-f117-604d9f002ef3 ? Or with other arguments, which
can trigger the search option like you see it every screen of the SCSM console on the upper righthandsite ? Maybe without the GUID and only using the name of incident (IR654650) ?
Thanks for helping me out. -
Management console problem after installing recommended patch cluster
Hello everyone.
I just got a new SUN 440 server, it didn't come with the solaris os installed and so I installed solaris 9 12/03 to it. The installation went fine and I could start the management console with no problems at all. Then I went to sunsolve.sun.com to download the latest recommended patch clusters for solaris 9 (this was yesterday Sept.-06-2006), I downloaded the file, checked it with md5sum, unzipped it, went to single user mode and ran the install_patch script. After the patch cluster finished installing I rebooted the server for the patches to take effect, I logged in, tried to run console management 2.1 and it starts OK but I cannot use any services it offers because it says (in the console events):
"Server Not Running: no solaris management console server was available on the specified server. Please ensure there is a Solaris Management Console server available on the specified host and that it is running"
When I click on "See Exception" I get (for a particular service that is... in this case com.sun.admin.fsmgr.client.VFsMgr - for managing file systems):
java.rmi.RemoteException: Server RMI is null:
at sun.com.management.viperimpl.client.ViperClient.lookupServer(ViperClient.java:376)and so on...
I already checked that the service is running on port 898 and it seems that there is no other app. using that same port. I also restarted the service using /etc/init.d.init stop/status/start but I get the same results.
I don't know solaris very much and don't know what else to do, please help.
Thanks in advance.Well, I guess what you see isn't what you get.
Guess I'm used to the fact USENET just left things formatted the way they were :-O -
Error in connect to Enterprise manager console
I am getting the following error message when trying to connect to oracle 9i Enterprise manager console with the following username and password: sysoper/oem_temp as sysoper AND sys/password as sysdba
Error Message :ORA12532:TNS:Invalid arguement
I installed oracle 9i in my home PC.
Can any one Please Help me
Thanks in AdvanceHi all
Are you trying to connect using stand alone? or using and OMS?
I tried to connect using stand alone, i didnot change any system usernames and passwords (Defaults)
Username: System
password: Password
service: orcl
connect as : Normal
I also tried to connect as
username : Sys
password: password
as: sysdba
Still getting the same Error
THANKS ONIL -
Deploying via powershell command from AppV Management Server 5.0
Hello All,
Good day!
I am having hard time in deploying an application from AppV Management Server 5.0 using Powershell command.
I have an application which works in Standalone client machine and even from SCCM 2012(AppV Deployment), whereas if I deploy that application from AppV server it is not working
I am using this command line to deploy an application from AppV Mgmt server thru powershell command,
Import-AppvServerPackage -PackagePath "<Path of .appv file>" –DynamicDeploymentConfigurationPath "<Path of DeploymentConfig.xml"> | Publish-AppvServerPackage -Verbose | Grant-AppvServerPackage -Groups "domain\AppV_Users"
-Verbose
is there anything wrong in the command which I used?
When I run, am receiving this error.
Import-AppvServerPackage : A parameter cannot be found that matches parameter name
'DynamicDeploymentConfigurationPath'.
At line:1 char:126
+ ... 1.0.3333.appv" –DynamicDeploymentConfigurationPath '\App_DeploymentConfig.xml' ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (:) [Import-AppvServerPackage], ParameterBindingException
+ FullyQualifiedErrorId : NamedParameterNotFound,Microsoft.AppV.Server.Cmdlets.ImportAppvServerPackageCommand
whereas this command works, without DynamicDeploymentConfigurationPath
Import-AppvServerPackage -PackagePath "<Path of .appv file>" | Publish-AppvServerPackage -Verbose | Grant-AppvServerPackage -Groups "domain\AppV_Users" -Verbose
How do I direct my application to take the DeploymentConfig.xml file though powershell.
I even tried to Import this xml from AppV Management console, even it did not work for me.
Kindly help me, your inputs needed.
Any help would be greatly appreciated.
Thanks in Advance!
Regards,
RajHi Falko,
Thanks for your response.
As you said, I tried to import the package and used set-appvserverpackage
PS C:\Users\Administrator.xxxxxxxxxxx> Import-AppvServerPackage "\\appv\Content\Filezilla\Filezilla.appv"
Id : 15
Name : Filezilla
Description :
PackageGuid : e8720679-cc41-4578-98a4-32a382f790ef
VersionGuid : 296708bc-e07d-474a-bb46-1f09d9779a4c
Version : 0.0.0.1
Enabled : False
Applications : {}
Entitlements : {}
ConnectionGroups : {}
PackageUrl : \\appv\Content\Filezilla\Filezilla.appv
import was successful, when I try Set-Appvserverpackage am receiving the following error
PS C:\Users\Administrator.xxxxxxxxxxx> Set-AppvServerPackage -DynamicDeploymentConfigurationPath "\\appv\Conte
nt\Filezilla\Filezilla_DeploymentConfig.xml" | Publish-AppvServerPackage -Global
Set-AppvServerPackage : Parameter set cannot be resolved using the specified named parameters.
At line:1 char:1
+ Set-AppvServerPackage -DynamicDeploymentConfigurationPath "\\appv\Content ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (:) [Set-AppvServerPackage], ParameterBindingException
+ FullyQualifiedErrorId : AmbiguousParameterSet,Microsoft.AppV.Server.Cmdlets.SetAppvServerPackageCommand
I am going wrong somewhere... -
Installation problem with Enterprise Manager Console
When i am installing 10G database installation was failed at configuring DBConsole. later from OUI(Oracle Universal Installer) i uninstalled Enterprise Manager Console. my Question was how to reinstall the Enterprise Manager Console alone?
When i am trying to install from OUI. it is not allowing me to install Enterprise Mager Alone (stating Database is mandatory) .
for more information on dbconsole failure you can refer following log file
Sep 27, 2007 3:22:28 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle1\product\10.2.0\db_1\cfgtoollogs\dbca\Embarq\emConfig.log.
Sep 27, 2007 3:22:28 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'CHECK_CONFIG' set to true
Sep 27, 2007 3:22:28 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:33 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:33 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: DBSNMP
Sep 27, 2007 3:22:34 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:34 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:34 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: Embarq
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: Embarq
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: Embarq
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBID.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: No dbid available. Will query db to extract it.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBID value: 1923985629
Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYSMAN
Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:39 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:40 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.DatabaseChecks performReposChecks
WARNING: 'shared_pool_size' must be greater than or equal to 80 MB.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: Embarq
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties has been copied to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca has been copied to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml has been copied to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: Embarq Host: H1B-6F175-9JVJ.GDNINDIA.COM Node: null OH: D:\oracle1\product\10.2.0\db_1 agentHome: null isCentral: false
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: Embarq Host: H1B-6F175-9JVJ.GDNINDIA.COM Node: null OH: D:\oracle1\product\10.2.0\db_1 isDBC: false
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:44 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:22:44 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: Embarq Host: H1B-6F175-9JVJ.GDNINDIA.COM Node: null OH: D:\oracle1\product\10.2.0\db_1 isDBC: false
Sep 27, 2007 3:22:44 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_Embarq.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_Embarq.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_Embarq.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_Embarq.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to D:\oracle1\product\10.2.0\db_1\oui
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [D:\oracle1\product\10.2.0\db_1]
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME D:\oracle1\product\10.2.0\db_1
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file D:\oracle1\product\10.2.0\db_1\install\staticports.ini
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: D:\oracle1\product\10.2.0\db_1:H1B-6F175-9JVJ.GDNINDIA.COM:null:Embarq:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_Embarq.
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_Embarq value: 3938
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_Embarq.
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_Embarq value: 1158
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_Embarq.
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_Embarq value: 5540
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_Embarq.
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_Embarq value: 5520
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for SID: Embarq : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully granted priviliges to dbsnmp.
Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Sep 27, 2007 3:22:48 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocked mgmt_view account
Sep 27, 2007 3:22:48 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully unlocked relevant accounts
Sep 27, 2007 3:22:48 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYSMAN
Sep 27, 2007 3:22:49 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:23:07 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Finished executing emreposoutofbox.sql
Sep 27, 2007 3:23:07 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.EMDBCConfig updateEmomsProps
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties ...
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.EMDBCConfig copyOC4JDir
CONFIG: Copying OC4J config files from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _makeDirectory
CONFIG: Create directory D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\application.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\application.xml
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\data-sources.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\data-sources.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\global-web-application.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\global-web-application.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\http-web-site.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\internal-settings.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\internal-settings.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\java2.policy to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\java2.policy
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\jazn-data.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jazn-data.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\jazn.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jazn.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jms.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\mime.types to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\mime.types
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\oc4j-connectors.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\oc4j-connectors.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\principals.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\principals.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\rmi.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\server.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _makeDirectory
CONFIG: Create directory D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\META-INF
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\META-INF\MANIFEST.MF to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\META-INF\MANIFEST.MF
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _makeDirectory
CONFIG: Create directory D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\application-deployments\default\defaultWebApp
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\application-deployments\default\defaultWebApp\orion-web.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\application-deployments\default\defaultWebApp\orion-web.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.EMDBCConfig copyOC4JDir
CONFIG: Finished copying OC4J config files
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jms.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jms.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\rmi.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\rmi.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\http-web-site.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\http-web-site.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.EMAgentConfig updateEmdProps
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties ...
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.EMAgentConfig updateAgentConfigFiles
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties ...
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getLocalListener
CONFIG: Using specified listener name: LISTENER
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.EMAgentConfig updateAgentConfigFiles
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml ...
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.EMAgentConfig instantiateEMConfigFiles
CONFIG: Local host name: H1B-6F175-9JVJ.GDNINDIA.COM
Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [COMPUTERNAME=H1B-6F175-9JVJ, NEED_EXIT_CODE=1, ORACLE_SID=Embarq, PATH=D:\oracle1\product\10.2.0\db_1\jdk\jre\bin\server;D:\oracle1\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;d:\data\notes;c:\program files\notes, SystemRoot=C:\WINDOWS, TZ=, WINDIR=C:\WINDOWS]
Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: CMD /C D:\oracle1\product\10.2.0\db_1\bin\emctl.bat deploy dbconsole D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM:3938 H1B-6F175-9JVJ.GDNINDIA.COM Embarq
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 0
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Execution of CMD /C D:\oracle1\product\10.2.0\db_1\bin\emctl.bat deploy dbconsole D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM:3938 H1B-6F175-9JVJ.GDNINDIA.COM Embarq completed successfully
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Creating shared install...
Source location: D:\oracle1\product\10.2.0\db_1
Destination (shared install) : D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq
DeployMode : dbconsole
Creating directories...
Setting console properties ...
Setting log and trace files locations for Console ...
Setting log and trace files locations for Agent ...
Service "OracleDBConsoleEmbarq" create SUCCESS
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emoms.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emoms.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [LD_LIBRARY_PATH=D:\oracle1\product\10.2.0\db_1\lib32;D:\oracle1\product\10.2.0\db_1\lib;D:\oracle1\product\10.2.0\db_1\perl\lib;null, PERL5LIB=D:\oracle1\product\10.2.0\db_1\sysman\admin\scripts;D:\oracle1\product\10.2.0\db_1\bin;]
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: D:/oracle1/product/10.2.0/db_1/perl/5.8.3/bin/MSWin32-x86-multi-thread\perl.exe D:\oracle1\product\10.2.0\db_1\bin\targetdeploy.pl D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM Embarq
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 0
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Execution of D:/oracle1/product/10.2.0/db_1/perl/5.8.3/bin/MSWin32-x86-multi-thread\perl.exe D:\oracle1\product\10.2.0\db_1\bin\targetdeploy.pl D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM Embarq completed successfully
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Creating targets.xml in state directories...
Source location: D:/oracle1/product/10.2.0/db_1
Destination : D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq
Creating directories...
Creating targets.xml...
Done.
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.EMAgentConfig instantiateEMConfigFiles
CONFIG: Successfully deployed state dirs for H1B-6F175-9JVJ.GDNINDIA.COM
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.EMAgentConfig performConfiguration
CONFIG: Successfully updated agent config files
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp has been copied to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp has been copied to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\install\portlist.ini ...
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\install\portlist.ini has been copied to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: Writing the selected ports to portlist.ini
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\install\portlist.ini
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: File D:\oracle1\product\10.2.0\db_1\install\portlist.ini is successfully updated
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\install\portlist.ini ...
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\install\portlist.ini has been copied to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: Writing the selected ports to portlist.ini
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\install\portlist.ini
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: File D:\oracle1\product\10.2.0\db_1\install\portlist.ini is successfully updated
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: cmdType: 0
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Starting Windows service...OracleDBConsoleEmbarq
Sep 27, 2007 3:23:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:23:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:23:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:23:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:23:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:28:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:28:16 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at D:\oracle1\product\10.2.0\db_1\cfgtoollogs\dbca\Embarq\emConfig.log for more details.
Sep 27, 2007 3:28:16 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:569)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:181)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:150)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:155)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:430)
at java.lang.Thread.run(Thread.java:534)There is a log file referred at Refer to the log file at "D:\oracle1\product\10.2.0\db_1\cfgtoollogs\dbca\Embarq\emConfig.log for more details."
Check the contents of this file.
Out from the log you posted I can see it is a windows platform. One common issue with windows and EM is the lack of a fixed IP Address. If this is the case configure a loopback adapter.
In the mean time, you don't need to have checked the configure EM DB Control from install time, you can skip this configuration and perform it later, so at least you have a working database just to start.
~ Madrid -
Problem with SAP Management console 'yellow is not changing to green'
Hi
I am starting my SAP Server from SAP Management console( ECC6.0 IDES Version).
I am able to login into my system but after few minutes the server color is changing from Green to Yellow and I am not able to continue using my system. What could be the problem? How to resolve the same?
I also tried Some suggestions posted before by using cmd ....Please help me out in a step by step manner.
Thanks.trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
B
B Wed Aug 27 21:12:36 2014
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ECC\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\ECC\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\ECC\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
B New connection 0 created
M sysno 00
M sid ECC
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 2900
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2900) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Wed Aug 27 21:12:37 2014
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05D30040, size: 4653368)
M DpShMCreate: allocated sys_adm at 05D30040
M DpShMCreate: allocated wp_adm at 05D31E40
M DpShMCreate: allocated tm_adm_list at 05D365C0
M DpShMCreate: allocated tm_adm at 05D365F0
M DpShMCreate: allocated wp_ca_adm at 06105890
M DpShMCreate: allocated appc_ca_adm at 0610B650
M DpShMCreate: allocated comm_adm at 0610D590
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0618E450
M DpShMCreate: allocated gw_adm at 0618E490
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0618E4C0
M DpShMCreate: allocated wall_adm at 0618E4C8
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Aug 27 21:12:38 2014
M ThInit: running on host gcecc62
M
M Wed Aug 27 21:12:39 2014
M calling db_connect ...
C Prepending D:\usr\sap\ECC\DVEBMGS00\exe to Path.
C
C Wed Aug 27 21:12:40 2014
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ECC on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 062FC018 063015B4 06300E3C
C Attaching to DB Server ECC (con_hdl=0,svchp=06300D88,svrhp=06310694)
C Starting user session (con_hdl=0,svchp=06300D88,srvhp=06310694,usrhp=06322CB8)
C
C Wed Aug 27 21:12:41 2014
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=06300D88,srvhp=06310694)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@ECC on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 062FC018 063015B4 06300E3C
C Attaching to DB Server ECC (con_hdl=0,svchp=06300D88,svrhp=06310694)
C Starting user session (con_hdl=0,svchp=06300D88,srvhp=06310694,usrhp=06322CB8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=06300D88,srvhp=06310694)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10933]
B
B Wed Aug 27 21:12:42 2014
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server gcecc62_ECC_00 on host gcecc62 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Aug 27 21:12:42 2014
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2900) [dpnttool.c 327]
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid ECC
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 2528
Wed Aug 27 21:12:30 2014
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2528) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Aug 27 21:12:35 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc62_ECC_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05D30040, size: 4653368)
DpShMCreate: allocated sys_adm at 05D30040
DpShMCreate: allocated wp_adm at 05D31E40
DpShMCreate: allocated tm_adm_list at 05D365C0
DpShMCreate: allocated tm_adm at 05D365F0
DpShMCreate: allocated wp_ca_adm at 06105890
DpShMCreate: allocated appc_ca_adm at 0610B650
DpShMCreate: allocated comm_adm at 0610D590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0618E450
DpShMCreate: allocated gw_adm at 0618E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0618E4C0
DpShMCreate: allocated wall_adm at 0618E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
Wed Aug 27 21:12:36 2014
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( gcecc62) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >gcecc62_ECC_00 <)
DpStartStopMsg: start msg sent
Wed Aug 27 21:12:37 2014
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Wed Aug 27 21:12:38 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Wed Aug 27 21:13:17 2014
*** ERROR => W0 (pid 2900) died [dpxxdisp.c 14241]
*** ERROR => W1 (pid 1548) died [dpxxdisp.c 14241]
*** ERROR => W2 (pid 2908) died [dpxxdisp.c 14241]
*** ERROR => W3 (pid 2920) died [dpxxdisp.c 14241]
*** ERROR => W4 (pid 2924) died [dpxxdisp.c 14241]
*** ERROR => W5 (pid 1944) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbf --> 0xbe
*** ERROR => W6 (pid 2936) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbe --> 0xbc
*** ERROR => W7 (pid 2944) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbc --> 0xb8
*** ERROR => W8 (pid 2952) died [dpxxdisp.c 14241]
*** ERROR => W9 (pid 2960) died [dpxxdisp.c 14241]
*** ERROR => W10 (pid 2968) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb8 --> 0xb0
*** ERROR => W11 (pid 2972) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb0 --> 0xa0
*** ERROR => W12 (pid 2980) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:27 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Aug 27 15:43:27 2014
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2900 Ended no 1 0 0
1 DIA 1548 Ended no 1 0 0
2 DIA 2908 Ended no 1 0 0
3 DIA 2920 Ended no 1 0 0
4 DIA 2924 Ended no 1 0 0
5 DIA 1944 Ended no 1 0 0
6 UPD 2936 Ended no 1 0 0
7 ENQ 2944 Ended no 1 0 0
8 BTC 2952 Ended no 1 0 0
9 BTC 2960 Ended no 1 0 0
10 BTC 2968 Ended no 1 0 0
11 SPO 2972 Ended no 1 0 0
12 UP2 2980 Ended no 1 0 0
Dispatcher Queue Statistics Wed Aug 27 15:43:27 2014
===========================
+------+--------+--------+--------+--------+--------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP | 0 | 2 | 2000 | 5 | 5 |
+------+--------+--------+--------+--------+--------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+--------+--------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Wed Aug 27 15:43:27 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Aug 27 15:43:27 2014
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:32 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >gcecc62_ECC_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2884) (SOFT_KILL)
Stop icman
killing process (2892) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2884 HANDLE:1596)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:33 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2884 HANDLE:1596)
wait for end of icman
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:34 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:35 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:36 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:37 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:38 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:39 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:40 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:41 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:42 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:43 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:44 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2892 HANDLE:1600)
DpStartStopMsg: send stop message (myname is >gcecc62_ECC_00 <)
NiIMyHostName: hostname = 'gcecc62'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Aug 27 21:13:45 2014
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1536 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1536 (pos=2)
SiSelNRemove: removed sock 1536
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1536
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2528) [dpxxdisp.c 10259]
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid ECC
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 2528
Wed Aug 27 21:12:30 2014
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2528) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Aug 27 21:12:35 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc62_ECC_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05D30040, size: 4653368)
DpShMCreate: allocated sys_adm at 05D30040
DpShMCreate: allocated wp_adm at 05D31E40
DpShMCreate: allocated tm_adm_list at 05D365C0
DpShMCreate: allocated tm_adm at 05D365F0
DpShMCreate: allocated wp_ca_adm at 06105890
DpShMCreate: allocated appc_ca_adm at 0610B650
DpShMCreate: allocated comm_adm at 0610D590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0618E450
DpShMCreate: allocated gw_adm at 0618E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0618E4C0
DpShMCreate: allocated wall_adm at 0618E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
Wed Aug 27 21:12:36 2014
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( gcecc62) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >gcecc62_ECC_00 <)
DpStartStopMsg: start msg sent
Wed Aug 27 21:12:37 2014
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Wed Aug 27 21:12:38 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Wed Aug 27 21:13:17 2014
*** ERROR => W0 (pid 2900) died [dpxxdisp.c 14241]
*** ERROR => W1 (pid 1548) died [dpxxdisp.c 14241]
*** ERROR => W2 (pid 2908) died [dpxxdisp.c 14241]
*** ERROR => W3 (pid 2920) died [dpxxdisp.c 14241]
*** ERROR => W4 (pid 2924) died [dpxxdisp.c 14241]
*** ERROR => W5 (pid 1944) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbf --> 0xbe
*** ERROR => W6 (pid 2936) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbe --> 0xbc
*** ERROR => W7 (pid 2944) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbc --> 0xb8
*** ERROR => W8 (pid 2952) died [dpxxdisp.c 14241]
*** ERROR => W9 (pid 2960) died [dpxxdisp.c 14241]
*** ERROR => W10 (pid 2968) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb8 --> 0xb0
*** ERROR => W11 (pid 2972) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb0 --> 0xa0
*** ERROR => W12 (pid 2980) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:27 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Aug 27 15:43:27 2014
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2900 Ended no 1 0 0
1 DIA 1548 Ended no 1 0 0
2 DIA 2908 Ended no 1 0 0
3 DIA 2920 Ended no 1 0 0
4 DIA 2924 Ended no 1 0 0
5 DIA 1944 Ended no 1 0 0
6 UPD 2936 Ended no 1 0 0
7 ENQ 2944 Ended no 1 0 0
8 BTC 2952 Ended no 1 0 0
9 BTC 2960 Ended no 1 0 0
10 BTC 2968 Ended no 1 0 0
11 SPO 2972 Ended no 1 0 0
12 UP2 2980 Ended no 1 0 0
Dispatcher Queue Statistics Wed Aug 27 15:43:27 2014
===========================
+------+--------+--------+--------+--------+--------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP | 0 | 2 | 2000 | 5 | 5 |
+------+--------+--------+--------+--------+--------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+--------+--------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Wed Aug 27 15:43:27 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Aug 27 15:43:27 2014
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:32 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >gcecc62_ECC_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2884) (SOFT_KILL)
Stop icman
killing process (2892) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2884 HANDLE:1596)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:33 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2884 HANDLE:1596)
wait for end of icman
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:34 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:35 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:36 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:37 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:38 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:39 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:40 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:41 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:42 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:43 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:44 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2892 HANDLE:1600)
DpStartStopMsg: send stop message (myname is >gcecc62_ECC_00 <)
NiIMyHostName: hostname = 'gcecc62'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Aug 27 21:13:45 2014
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1536 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1536 (pos=2)
SiSelNRemove: removed sock 1536
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1536
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2528) [dpxxdisp.c 10259]
Good Bye .....
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2524] Wed Aug 27 21:12:28 2014
[Thr 2524] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 73
intno 20050900
make: multithreaded, Unicode, optimized
pid 2516
[Thr 2524] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2516) [msxxserv.c 1824]
[Thr 2524] Wed Aug 27 21:12:29 2014
[Thr 2524] load acl file = D:\usr\sap\ECC\SYS\global\ms_acl_info.DAT
[Thr 2524] MsGetOwnIpAddr: my host addresses are :
[Thr 2524] 1 : [192.168.10.1] gcecc62 (HOSTNAME)
[Thr 2524] 2 : [127.0.0.1] gcecc62 (LOCALHOST)
[Thr 2524] 3 : [192.168.10.11] gcecc62 (NILIST)
[Thr 2524] MsHttpInit: full qualified hostname = gcecc62
[Thr 2524] HTTP logging is switch off
[Thr 2524] set HTTP state to LISTEN
[Thr 2524] ms/icf_info_server : deleted
[Thr 2524] *** I listen to port sapmsECC (3600) ***
[Thr 2524] *** I listen to internal port 3900 (3900) ***
[Thr 2524] *** HTTP port 8100 state LISTEN ***
[Thr 2524] CUSTOMER KEY: >Z0250905160<
[Thr 2524] Wed Aug 27 21:13:44 2014
[Thr 2524] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from gcecc62_ECC_00 [msxxserv.c 4679] -
Management console end up with error 1 status
Hi Friends,
When I start SAP management console, it is end-up with error status 1. Immediately after starting Management console, it is coming to Green color and with in 2~3 minutes, again it is coming to Yellow color and ending with error status-1.
Could anyone please help to solve this issue as I am not able to log-on SAP for a long time?
Please advice.
Regards,
ManiHi,
Agree with garyc007. Exchange 2010 tools show the currently installed Service Pack version, and not what RU is currently installed.
Exchange 2010 SP3's build number is 14.3.123.4. One CAS server ends up with version 14.03.0174.001, it means this server has installed Update Rollup 4 for Exchange Server 2010 SP3 successfully. I recommend you check if the other server has installed Update
Rollup 4 for Exchange Server 2010 SP3 successfully.
Here is a blog for your reference.
Exchange Server and Update Rollups Build Numbers
https://social.technet.microsoft.com/wiki/contents/articles/240.exchange-server-and-update-rollups-build-numbers.aspx
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support -
It's reasonable to start Operations Manager Console always with /ClearCache option?
In the last month, sometimes i've the problem, that the operations manager console can't find objects; shows some alerts as acitve alerts, but they're closed.
It could be solved by using the ClearCache argument, when i starts the console.
It's reasonable to start the console always with ClearCache option? --or i've have some handicaps, when i do so?
Thank you,
Kind regards
Wolfgang WinterHi,
Here is a discussion about this topic, please also go through it:
console /ClearCache
http://social.technet.microsoft.com/Forums/en-US/400a1856-bc9e-4cd1-879d-76c56b8dee88/console-clearcache?forum=operationsmanagergeneral
Regards,
Yan Li
Regards, Yan Li
Maybe you are looking for
-
Cannot load Quicktime plug-in 7.6.6
I am trying to watch Apple "Powerful" video on my Mac Mini/Safari and it won't play - it says it "cannot load the Quicktime 7.6.6 plug in" - but if I try to download the plug-in, the site says it comes standard with OSX...why can't I play a video off
-
PSE8 won't install on iMac... Error 2
Hi, I know that many others have had this issue but I can't find a fix online for it... so I'm hoping someone (Ankush..? Please!) can help. I've tried uninstalling and re-installing PSE 8 but it wigs out with"error 2" every time I try. I have trie
-
Connect oracle 11.2g with webprotege
Hi, I have created a ontology and loaded it to oracle 11.2g. now i want to access the ontology in web-protege. Is there anyway to connect the oracle 11g and web-protege? I am not sure if this the right place to post. if someone knows the right group
-
My client currently has all materials created as NLAGs but wants to start tracking inventory. They do not want to change the material number. There are sales orders active for materials. Can anyone give me some guidance on all the things we need to w
-
I am not prepared to give my credit card details for a free app. These days I don't trust anyone with my bank details if I am not making a purchase & the app is free.