APSdaemon and Home Sharing?

Hi all,
Just wanted to post an issue that just this week I started having and figure out what is going on. I have iTunes 10.5.2 loaded on my Windows 7 desktop and up until this week have had no issues with it. Other than putting in a new router, I haven't changed anything with my machine configuration. Now, when I start iTunes, I immediately get an hourglass and it hangs. I noticed "apsdaemon" running in my list of processes and like others on this forum, once I closed it iTunes started up without any problems. Other than the fact that now I can't sync my devices wirelessly which was nice.
Now it won't sync with my older Apple TV (doesn't show under Devices) and on my newer ATV 2 upstairs, it doesn't list my desktop under "Computers" for sharing. I have home sharing selected in iTunes and it was showing up under the "Shared" heading on the left side of iTunes. The ATV2 shows my home movies, playlists, etc so it obviously is locating iTunes...but for some reason the home sharing is broken.
Would the APSdaemon process being closed have something to do with the broken ATV connections? I haven't restarted my ATV's yet so I will give that a shot. I have the firewall turned off on my router so I don't think that is the problem.
The odd thing is that this just started happening out of the blue...10.5.2 was working fine until this week. I am thinking about reverting back to 10.5.1 but I understand that uninstalling correctly is a pain.
Any thoughts out there??

Are you connected to the same SSID network?
to make things a little more easy, i'd perfer to have all my itunes on a network drive for all pc's connected to one itunes and scratch the home sharing itunes to view under another itunes.
Only problem im having is that wrong pictures are showing up for movie/tv show connecting to different computers conecting to one itunes library.
Home Sharing on iPods show wrong pics

Similar Messages

Airplay and home sharing does not work with my 2nd gen apple tv

though my 2nd gen apple tv with version 7 and my iphone 4s with ios 8.0.2 are connected to the same wifi network, airplay and home sharing doesnt show up in my itunes nor in my phone! what should i do?

Hello there, Ashwin.
The following Knowledge Base articles offers up some great steps for troubleshooting issues with both AirPlay and Home Sharing, respectively:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
http://support.apple.com/kb/ts4215
and
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I can't use home sharing because it says Bonjour is not enabled. So I went to administrative tools and started it. Restarted my computer and home sharing still isn't working

I can't use home sharing because it says Bonjour is not enabled. So I went to administrative tools and started it. Restarted my computer and home sharing still isn't working

I have also tried repairing Bonjour in adminstrative tools and still a no go! Frustrated!!! Looking for another idea

HT4437 What is difference between air play and home sharing if you just want to show iPhoto's on HD tv through apple tv (just purchased MacBook Air and Apple tv)

What is difference between air play and home sharing when wanting to show photos on HD tv through apple tv? Just bought Mac book air and apple tv.

You would have to use home-sharing if streaming from a computer. Computer would need to be on and running iTunes.
http://support.apple.com/kb/HT4352
Airplay would be useful if streaming from an IOS device
http://support.apple.com/kb/HT4437

Remote app and home sharing

remote app & home sharing worked on my new iPad (3rd gen) but did not work on my iPhone 4. this went on for a week or so but now both of them (remote app and home sharing) work on my iPhone but stopped working on iPad. I tried re installing itunes to 10.6.1.7 (latest version) with no luck. please help because i prefer using my ipad to control my pc

Be sure that all devices are on the same network.
If apple tv and remote are on same homeshare you should be able to select and control the apple tv from with in the remote app.
If apple tv and the itunes are on the same homeshare the apple tv will see the itunes library (and shared photos) in the computer section.
Additionally if these are all on the same homeshare you should see both the apple tv and the itunes library in the remote app.
hope that helps.

Is anybody else having problems with iOS 7.1 and Home Sharing?

I have two iPhone 4's - one I recently upgraded to iOS 7.1 and the other running 6.3.1. The phone upgraded to 7.1 will not connect to my (rather large iTunes library) on my Mac Mini (running 10.9.2). The 7.1 phone does see the library - and attempts to connect - but the progress indicator stops at about 50%.
I've tried de-activating sharing on the Mini and then re-activating. I've tried restoring the 7.1 phone from a back-up. No change.
Also - now the 6.3 phone will connect to the library - but the playlists have no entries and 99% of the library is missing.
Before the upgrade - the phone now running 7.1 never had any issues with Home Sharing.
Anyone else out there having issues with iOS 7.1 and Home Sharing?

I've had no problems with Facebook on my iPhone 5 but here are a couple of suggestions.
1. Quit Facebook like I describe then reset the iPhone. Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
2. If the first thing doesn't help, quit Facebook again, delete Facebook, and reset the iPad. After the iPad restarts use the App Store app to download Facebook again.

AirPlay and Home Sharing are no longer working.

Recently, Airplay and Home Sharing stopped working completely from my iMac. There just seems to be a miscommunication- AirPlay is showing up, my Apple TV and Airport Extreme are selectable, but then they wont connect. I've been trying to fiddle around with netword settings to try to fix it but no luck. Still works from my iPhone just fine.
Maybe someone who's Airplay and Home Sharing are working could tell me what their Advanced Network Settings look like?
Thank you for any help!

Yes I did all the easy stuff first. I even re-installed Mavericks incase a special file was missing. I've totally reset my AirPort Express several times. It's what's transmitting my WiFi and it's super close to my iMac.
It's deffinitely a problem with my iMac seeing as it's not working with both my AirPort Express and Apple TV, also can't access Shared movies on my iPad via Home Sharing so yeah... definitely my iMac. All those other things communicate to eachother just fine.

I have a Windows 7 Desktop and home sharing won't work to my Windows 8 laptop?

My Windows 7 computer is recongnizing my laptop for home sharing, but my Windows 8 laptop won't recognize the home sharing with the desktop. Both computers are authorized and home sharing is on. HELP! I followed the process on the "How to move your music to a new computer" page.

Hi Danyellefrommi!
You should try the steps suggested in this article, which is about troubleshooting issues with Home Sharing:
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Two apple TVs, 4 computers and home sharing

We have four computers that work well with our Apple TV and home sharing. Is it possible to have a second Apple TV operate on the same network and stream content to a second TV? I seem to recall there was a limit to the number of computers that could be a part of home sharing but I don't recall if there was a limit to Apple TVs
Thanks.

You can have up to 5 first gen models connected to each mac, the five limit counts but macs and Apple TVs have a five count each not between them.
I'm not really sure how many second gen models you can have but it's certainly more than one, I'd imagine at least five and likely more - because it's homeshare not an authorised device.

Upgraded itunes to 10.7 and home sharing stop working

I upgraded itunes to 10.7 and home sharing on the Apple TV stopped working. That is why I bouught it. Is that it? Is it now a boat anchor?

Hello tollgater,
Thank you for using Apple Support Communities.
If home sharing is not working take a look at this article. It has information for iOS and OSX.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Have a nice day,
Mario

Can't see all icons, I only have setting and home sharing!!??

I have many issues with my apple TV, now and most importantly that i simply don't see any icons on home page; anything like youtube, movies, series, netflex or anything. I once had it but lost it now, I only can see settings and home sharing?

Correction; I only see "Computers" and "Settings". Nothing else!

My computers are authorized and home sharing is turned on. Why can I not see the home sharing icon?

my computers are authorized and home sharing is turned on...why can I not see the home sharing icon to troubleshoot and import libraries?

Hello jfromlea,
Thank you for using Apple Support Communities.
You can use the following article to troubleshoot your Home Sharing issues:
Troubleshooting Home Sharing
Regards,
Jeff D.

Can't wake Lion over wifi (or ethernet) using iPad and home sharing.

I've upgraded to Lion and everything's fine apart from one problem: using my iPad to access home shared iTunes content on my mac no longer works when my mac is asleep.
That's a change in behaviour from Snow Leopard; I used to be able to sleep my mac and then wake it over wifi using either my iPad or iPhone to access all of my home shared libraries. The mac screen used to light up for ten seconds and then go dark again, but it served me the files.
Lion seems to go into a deeper sleep which it can't be woken from. If I attempt to wake my mac from my iPad within about ten minutes of putting my mac to sleep then home sharing seems to work and lets me use the home share libraries, but if I leave it any longer than that then the mac seems to fall into a coma and can't be woken. The weird thing is that I still see a "shared library" folder on my iPad, but when I click on it nothing happens. I think my Time Capsule is listening for wifi access and issuing the magic packet to the mac, but the mac just ain't listening.
I'm using a Time Capsule in bridge mode from an ADSL modem and I've accepted a TC firmware update last week and I'm on lion 10.7.3. I've tried using Ethernet to connect the mac to the TC (and temporarily disabled the wifi connection) but that still doesn't work. Also, note I'm NOT suffering from the problem that 10.7.3 seems to be giving a few other people - my mac reconnects to my wifi just fine when I wake it up manually. For the record, This was an upgrade, so there's still a tick in "wake on network" in power settings and home sharing on iTunes is still configured the same as it was before.
Does anyone have any suggestions about how I can get home sharing to work when my Lion mac is asleep please?
Jon

Jonathan:
The reworked release of the Combo came available the 2-nd or 3-rd of Feb, if you downloaded 10.7.3 complete after that date it will be OK already, no need to instal the Combo. But you can see the exact number of 10.7.3 in System Information/ Software panel: it should be 11D50b.....
fzahn:
I understand, I have TC and Extreme also, no need to set anything. And indeed I understand that it may be important for (as it is for me),
BUT even if it worked after you replaced the kext, I advise strongly not to read in an old kext over a new one, that may give other issues (you observed one already: Airdrop)... I hope you backed up the Lion one... for example such "replacing" was done in one (lousy) tool called TrimEnabler (to install Trim on a non-Apple SSD in the SnowLeopard OS): it replaced the whole kext. I read that there is a new version for Lion that just replaces the text piece that regards the identification for the Apple SSD's.... I do not dare to use such methods.... I advise to read the kext and compare the two (SL and Lion) and perhaps find a way to just replace the one string that is different (be sure it is precisely the same lenth in caracters)... BTW: after every update of Lion you have to do it again probably. Keep searching for a better way to solve your problem.
Did you do the firmware update of the TC and Extreme already?
BTW: there are two Airport Utilities for Lion: Airport Utility 5.6 and Airport Utility 6, the 5.6 is the "old" visual but in the new one 6 you can not change as many settings; if you want them both, change the name of the one you already have by putting the version number at the end of its name in Utilities, and install the other one, it will be installed additional not over.
Lex

How can I access my music library from a laptop on the road, as if my PC is not active? I tunes is installed on both PC and Home Sharing is enabled on both devices.

How can I access my music library from a laptop on the road, as if my PC is not active? I tunes is installed on both PC and Home Sharing is enabled on both devices.

The key constraint for Home Sharing in this context is that both PCs need to be on the same wifi network. So once you get out of range of the wifi network covering your home PC, the laptop is not going to be able to Home Share.
Have you considered importing your iTunes music to the laptop? Then you could listen to a local copy of the music on the laptop while you're on the road. (You can do the import via home sharing when both computers are on the same wifi network.)

Solution for Apple TV 2, Xfinity router, Ethernet connection and Home Sharing

I have read over the past week the problems people have been having configuring their Apple TV and Home Sharing. I was experiencing the same issues as others....until tonight. I finally got it to work with an Ethernet connection. Previously, I was only able to get it to work via wifi and home sharing would drop after awhile.
1) Xfinity router settings. Like others I was suspicious if the Xfinity router was causing the issues because of the separation between wifi network and Ethernet network. It's not the router problem. I disabled the firewall. Enabled port forwarding. Gave a static IP address to the Apple TV. Added forwarding of ports
   123 TCP
    3689 UDP (all other support says this should be TCP but searched through and found a thread that suggested changing to UDP...this was the key)
    5353 UDP
    80 TCP
    443 TCP
    53 TCP
DMZ is off
Device discovery is disabled
Port triggering is disabled.
The wifi is setup and functional using DHCP. Lease time is 1 week.
RESET ROUTER AFTER ENTERING CONFIGURATION.
2) Mac computer. As of this posting the latest version of iTunes installed. Latest Safari version. All programs updated. Turned on Home Sharing. Turned off firewall. Gave Mac a static IP address. Set Mac for hard drive to never sleep. Set monitor to sleep after 15 minutes. Set date and time to automatically find based upon time zone. ( Apple TV needs to be set to the same time zone as computer and set to manual). Enabled file sharing amongst users on Mac.
3) Apple TV. Ethernet connection. Configured TCP/IP to static IP address I configured on router for the Apple TV. Turned on AirPlay. Set date and time to manual and set as the same time zone as the computer with iTunes. Turned on Home Sharing. Using latest version of Apple TV.
Once the router was reset ( not restored and not just resetting the wifi. A complete router reset), the Apple TV found my iTunes library. It's been running now for over an hour and no drop in the home sharing. Working beautifully. I will be testing in the next couple days allowing the Apple TV to sleep, turning the firewall on the router to a minimal setting to see if it changes anything.
Just tested the AirPlay from my iPad 2 to the Apple TV while the Apple TV is connected via ethernet connection and it works. At this point it appears that the setup is correct and complete with no errors.
As a side note, the Ethernet connection between my router and Mac is via commercial devices using the power outlets as the wiring.
Hope this helps many of you that were/ are struggling to get this to work like I was.

spma3,
Appreciate your further message. As you say "it's not fixed", but at least your solution appears to be a viable workaround!
My Cisco RVS4000 Router will permit me to forward ports for up to 15 applications. Of these, thirteen already have default entries added, although none of these are presently Enabled. For example, here's just 2 lines...
Application           HTTP        NTP
External Port          80           123
Internal Port           80            123
Protocol                TCP          UDP
IP Address            No entries at both
and the Enabled box for both is unchecked. In fact none of these 13 possibilities is Enabled.
To do what you are advising, I would need to...
1) Enable the above Port 123 entry, changing it from UDP-->TCP.
2) Add new entries for 3689 UDP & 5353 UDP... using the two free slots at the end of the table.
3) Select three of the default entries, and reconfigure them for 80 TCP; 443 TCP; 53 TCP, all as per your guidance. And Enable them.
Now, my present setup here has...
1) My PC is wired straight to Port 2 of the Router, and has a Static IP Address set.
My new ATV2 is hard-wired into the same subnet, albeit thru a series of switches, and again a Static IP is set. My understanding is that hard wiring an ATV automatically disables its WiFi.
3) My wife's iPad2 is set for DHCP, so it can pick up an IP Address when on the move. It connects into the LAN using one of two WAP4410N Wireless Access Points. Ch-1 & Ch-6, with same SSID and security stuff set up on both. The WAPs in turn are wired in, again with Static IPs set. So depending where she is in the property she can connect with excellent signal strength, reaching the ATV2 by WiFi+LAN.
On the Router DMZ is OFF, Port Range Triggering has no entries, nothing is Enabled, so is OFF. No idea about Device Discovery!
Home Sharing is ON for the PC, ATV2 and iPad2, with the same Apple ID/Password set for each. It does work, just not consistently as it should.
So to fully implement your idea, all I need to do is to enter these details. But I am unclear which IP Address I should put in at each new Single Port Forwarding entry field. Certainly not the iPad2, as its DHCP allocated value will change. Is it the ATV2 or the PC? Not sure, please clarify.
BTW, I have no plan to deactivate my AVG Firewall on this PC. It is happy to pass all traffic related to iTunes, so cannot see this as a factor. Time zone same on all equipment.
I tried with just 3689 UDP and 5353 UDP yesterday, and things were definitely better. I used 192.168.20.227, the IP Address for the ATV2.
Look forward to your answer.

APSdaemon and Home Sharing?

Similar Messages

Maybe you are looking for