Apt-get like interface for pacman

Hello,
This is my first public contribution for Arch Linux community,
I built this script because i use arch on both of my desktops and debian on my servers and i get really confused sometimes with the options because of the mechanical typing, i got myself typing pacman install apache2 and apt-get -Syy or even trying to run pacman on debian and apt-get on arch.
I dont know how this will be acepted, its something that advanced users normally dislike, but, for newcomers i think that is a good option.
I wrote this very simple interface for pacman that converts into a apt-like utility, its use common pacman commands (yes, it uses pacman at background) and dont mess with pacman workout.
Ive upload the project on my github: https://github.com/drhoome/pac-get
Its very simple and straigthfoward (yes, just give execution permission and use, for now, theres no install/build method or configuration files, its build on top of python and should work with Python 2.7 and 3.x without any extra library).
Any feedback is welcome, even if for saying that the script is really useless for you
There's no manual or wiki right now, but, the software is really like apt-get, aptitude or apt-cache, and there's a built-in doc by typing pac-get --help.
Last edited by hoome (2015-04-28 22:42:07)

Looks nice, but wouldn't you rather use pacman commands?
One thing to point out: The update command gives pacman -Syy. Please be aware that just updating the package cache is considered bad practice if an upgrade does not follow right after, so maybe you should remove the update command. The pacman rosetta might also be of interest to you. Look it up on the wiki.
Last edited by runical (2015-04-29 06:52:35)

Similar Messages

[Request] Betty: Friendly English-like interface for your command line

Anyone with the capacities and interest to maintain Betty?
Betty is a friendly English-like interface for your command line.
She translates English-like phrases into commands in case you every run into situations like this.
This means you don't have to leave your command line to look up an obscure but useful command. Just ask Betty!
Discussion on reddit: http://www.reddit.com/r/linux/comments/ … x_command/
Source on Github: https://github.com/pickhardt/betty

I liked a lot of the ideas you posted. Though I have to disagree with the idea of having tablets being into the size range of over 12". You start getting larger than that and you may as well start using a laptop. On the flip side of that, I have to agree that there are too many of the 7" available, which are almost too small. The 8-10" tablets give you the portability and smaller size people want for stuffing into their bags, purses, etc. The larger tablets are getting into that bulky area and that defeats the purpose of the tablet to begin with. Unfortunately I find myself using e-books more than I intended, but I don't need a full, or larger than a full, sized sheet of paper. They get harder to handle, even with Lenovo 's great form design.
The only reason to have more than one tablet is if the developers can't come to terms and allow their products to be used across the board (talking of Amazon and Google here). I personally don't want to be carrying around more than one tablet and a phone. I want to simplify and streamline not add more bulk.
I loved that you pointed out that our voices will never replace our fingers. I don't like speaking to inanimate objects; too many experiences with automated phone services that did not end up well.
I congratulate Lenovo for their innovative design with the Yoga tablets.

Camera Raw like interface for Premiere Pro CC

Hi Adobe
I'm a photographer and video producer looking for an easier way to grade and adjust the levels of my footage in Premiere.
The DynamicLink with SpeedGrade is really lovely and quick, but getting my head around the new SG interface and being able to squeeze the best results out of it is a real challenge. Recently I discovered that I can open video files in Photoshop CC and use the Adobe Camera Raw interface as an effect on the footage and apply colour and levels changes there. This has really opened up the grading process for me and coming from a stills background with several years of using Lightroom to process my photos, I find the Camera Raw interface much more intuitive. It has allowed me to get better results much faster than I was getting out of SpeedGrade. The only issue is the workflow and render time involved in getting the video from Premiere to Photoshop and then back again is drawn out and complex.
My questions are:
Is there a current effect or plugin that replicates the Camera Raw interface and feature set in Premiere Pro / SpeedGrade?
Is this a feature Adobe is looking to include in future updates of Premiere?
It maybe laziness on my behalf not taking the time to learn the interface of SpeedGrade, but I know Adobe is a responsive developer and that this feature would speed up the grading process and would really appeal to the DSLR community who use your products for both photos and videos production.
Thanks in advance
Dan
Dan Murphy
Video Production & Photography
+61 0449 53 9797
www.mandurphy.net

As to quick corrections, a bit of experience in Sg and wow ... what you can do quickly. At first, SpeedGrade ticked me off, couldn't do squat in it. After a bit of learning about how to use scopes & what the goal is in video (very different than stills) ... and learning some of the interface bits ... and getting a Kensington Expert Mouse Trackball (which is a great trackball with a spinner ring and no mouse at all) so it works with the color wheels real spiffy ...and the ease of saving "looks" for my camera's main use stuff ... speed of quick corrections is stunning. "Normalize" ... a couple clicks if that's all you want to do. Keyboard shorts too. All for me, way faster than the 3-Way or Fast.
As to the ACR interface, I went down to NAB in Vegas this spring, got to talk with some of the folks "behind" Sg. And also such things as coming from a stills background, being familiar with the Lightroom and ACR style of panels, wondering if that was possible. Got a pretty good answer ... short answer, "possible" ... well, yes, ... probably.
But ... very, very difficult to do, because of a concatenation of things.
First ... the photo apps (Lr, P-shop, Bridge) are developed by a completely different group of people, EVERYTHING from the "look" or style thinkers to the coders. There is virtually no "code" similarity between the products for stills and the products for video. Think about the differences here ... Photoshop and Lightroom are designed to work on one image at a time, realistically, and allow "batching" instructions to a few others. And they can at times pretty much take over most computer's resources. The video apps are designed to work on (process) THOUSANDS of images at a time, as that's what a clip is, let alone a full sequence of clips. The coding "ideology" for the two is completely different. Even though P-shop has some video handling capability, NONE of the code is anywhere near alike. You can't say "we've got that code here, let's put it in over there ... ".
It would be like thinking you just wanted good power in a little European sportster so you decided to put a big American-built Cummings diesel motor in it. Um ... with enough work & hassle, it actually might be possible. The wisdom of the effort, let alone the happiness you might achieve with the result ... well, it might be worth thinking about before starting. Or at least realizing it's gonna be a ton of work to do.
Second ... resources while running. In stills, if one is technically sharp, one looks at a histogram while "developing" in Lr terminology. That histogram takes next to no resources whatever, works perfectly well. In video, if your aren't looking at least at a good Vectorscope if not also Parade while working, well ... the success of your endeavors let alone the time to create them is going to be ... perhaps ... poor. Probably. Yet those scopes can take quite a bit of resources all by their lonesome. Which is why they have the option to "pause" the scopes while playback is going on, as to keep them going in real-time is a right b-tard. Resource-wise.
Think of what's going in in the video apps: they take your source footage, but only the bits you've selected (but out FROM the whole clip constantly), all the changes & effects you've made, compute instantly for every flipping image at between 24 to 120 per second what it "should" look like, and display that in your playback monitor. This is a load the stills apps don't even think about. And yet, they've got to make these things "look" like there's no difference in getting things to your monitor than the stills programs. It is literally like comparing 18-wheel freight trucks to Maseratis. And expecting the Maserati to carry the load the freight truck does. Hey, the little Maserati may actually have more horsepower,. you know. Why can't it pull that semi-trailer? P-shop has some video capability, why can't you just cut & paste something else from P-shop into Sg?
So ... the long answer is adding some option like the LR/ACR style interface is an intriguing idea even for the Sg "team". However, it would pretty much mean they'd need to rebuild a ton of the program. Now, most of the things you can do within that interface Sg already does, albeit with vastly different code and "tools". When I asked about perhaps just allowing a Secondaries panel with the HSL look out of Lr, one of the main dudes just sort of ... blanched. I would guess from other comments that that little bit has been discussed or something along that line, and ... it would be a "Significant" people-using project to accomplish. From a coding standpoint, some parts of Sg would simply have to be rebuilt. With the appropriate de-bugging needed to get it operational AGAIN on so many different types of hardware/codecs/drivers/OS & etc.
There's times that HSL panel would allow me to easily do precisely what I want ... I would love to have it. I've put in numerous Wish Requests for it. And of course, done so in person. I'm not expecting to see it any time soon, mind you ... but again, put in wish requests for the ACR panel in Sg. Can't hurt.
Neil

[IDCS2 Win]How to get Interface for ISwatchesUIDData?

Hi All,
Please tell me how to get the Interface for ISwatchesUIDData.
Also please tell how to make use of GetItemList() method.
I need to get a count of all swatches that are selected in the Swatches Pallette.
Is this the Correct class &method that i have to use for my requirement?
Help needed very urgent.
Thanks
myRiaz

Hi Jaepil, Thanks a lot for your tremedous help! Im right now trying out [Option B]that you have suggested. Please have a look at the code snippet that i have tried out. When i compile this snippet i get my plugin Built but when i open the Indesign & run my plugin i get the following error"Indesign.exe has encountered a proble and needs to close" & Indesign Quits Suddenly. Some where im going wrong,but dont know where.Plz help me out. Here is the code: InterfacePtr<IApplication> app(gSession->QueryApplication()); InterfacePtr<IPaletteMgr> paletteMgr(app->QueryPaletteManager()); InterfacePtr<IPanelMgr> panelMgr(paletteMgr, UseDefaultIID()); InterfacePtr<IControlView>swatchPanelView(panelMgr->GetVisiblePanel(kSwatchesPanelWidge tID )); InterfacePtr<ISwatchesUIDData> SwatchUID (swatchPanelView,IID_ISWATCHESUIDLIST); //Here i got an error that IID_ISWATCHESUIDLIST is not declared.So i declared it myself as PMIID IID_ISWATCHESUIDLIST; is this correct?(Problem in this line only i guess!!!) const UIDList &select=SwatchUID->GetItemList(); sprintf(buf,"%d",select.Length()); CAlert::WarningAlert(buf); Plz tell where am i going wrong .WAITING 4 UR REPLY. Thanks myRiaz

.bashrc not working for pacman

Hi I was trying to get coloured output for pacman as per the wiki (Wiki Pacman Colour)I chose just to add the alias to my .bashrc method. I know that other functions of my .bashrc are working. This is my .bashrc
alias ls='ls --color=auto'
PS1='[\u@\h \W]\$ '
# coloured pacman output
alias pacs="pacsearch"
pacsearch () {
echo -e "$(pacman -Ss $@ | sed \
-e 's#current/.*#\\033[1;31m&\\033[0;37m#g' \
-e 's#extra/.*#\\033[0;32m&\\033[0;37m#g' \
-e 's#community/.*#\\033[1;35m&\\033[0;37m#g' \
-e 's#^.*/.* [0-9].*#\\033[0;36m&\\033[0;37m#g' )"
# safety copy, delete & colour
alias rm='rm -i'
alias cp='cp -iv'
alias mv='mv -i'
alias ..="cd .."
alias cl="clear"
alias ll="ls -lhav"
alias ls="ls -v --color=auto"
alias df="df -h"
alias du="du -hc"
alias mv="mv -iv"
alias cp="cp -v"
Any ideas on why it wont work have used gnome-terminal and xterm to test coloured output with no success.
This is the ll command alias working so I know my .bashrc is working or at least being recognised. I like the default behaviour of Pacman and wanted the colour output purely for readability.
[root@myhost flebber]# ll
total 192K
-rw-r--r-- 1 flebber users 400 2007-06-22 16:04 #.bashrc#
drwx------ 31 flebber users 4.0K 2007-06-23 15:07 .
drwxrwxr-x 5 flebber root 4.0K 2007-06-21 02:35 ..
-rw------- 1 flebber users 477 2007-06-23 15:07 .ICEauthority
drwx------ 2 flebber users 4.0K 2007-06-21 03:13 .Trash
-rw------- 1 flebber users 0 2007-06-21 03:15 .Xauthority
drwxr-xr-x 2 flebber users 4.0K 2007-06-22 05:31 .audacious
-rw-rw-r-- 1 flebber users 763 2007-06-23 15:05 .bash_history
-rw-rw-r-- 1 flebber users 510 2007-06-23 14:47 .bash_profile
-rw-rw-r-- 1 flebber users 607 2007-06-23 15:05 .bashrc
drwxr-xr-x 3 flebber users 4.0K 2007-06-21 13:59 .cache
drwxrwxr-x 6 flebber root 4.0K 2007-06-22 05:27 .config
drwxrwxr-x 3 flebber users 4.0K 2007-06-21 00:37 .dbus
-rw------- 1 flebber users 45 2007-06-22 16:17 .dmrc
drwxr-xr-x 3 flebber users 4.0K 2007-06-22 15:30 .emacs.d
-rw------- 1 flebber users 16 2007-06-21 04:00 .esd_auth
drwxr-xr-x 3 flebber users 4.0K 2007-06-21 03:47 .evolution
drwxr-xr-x 5 flebber users 4.0K 2007-06-21 08:32 .exaile
drwx------ 4 flebber users 4.0K 2007-06-22 15:33 .flock
drwxr-xr-x 5 flebber users 4.0K 2007-06-22 16:23 .fluxbox
drwxrwxr-x 2 flebber users 4.0K 2007-06-21 07:58 .fontconfig
drwxrwxr-x 5 flebber users 4.0K 2007-06-23 15:07 .gconf
drwxrwxr-x 2 flebber users 4.0K 2007-06-23 15:07 .gconfd
-rw-rw-r-- 1 flebber users 0 2007-06-22 05:19 .gksu.lock
drwxrwxr-x 3 flebber users 4.0K 2007-06-21 00:37 .gnome
drwxrwxr-x 9 flebber users 4.0K 2007-06-23 15:06 .gnome2
drwx------ 2 flebber users 4.0K 2007-06-21 00:37 .gnome2_private
drwxrwxr-x 2 flebber users 4.0K 2007-06-21 08:39 .gstreamer-0.10
-rw-rw-r-- 1 flebber users 89 2007-06-21 00:37 .gtkrc-1.2-gnome2
drwxrwxr-x 2 flebber users 4.0K 2007-06-21 00:40 .icons
drwxr-xr-x 4 flebber users 4.0K 2007-06-21 09:02 .listen
drwxrwxr-x 3 flebber users 4.0K 2007-06-21 01:32 .local
drwxr-xr-x 2 flebber users 4.0K 2007-06-21 08:39 .lyrics
drwx------ 3 flebber users 4.0K 2007-06-22 15:33 .macromedia
drwxrwxr-x 3 flebber users 4.0K 2007-06-21 00:37 .metacity
drwxrwxr-x 2 flebber users 4.0K 2007-06-22 15:33 .mozilla
drwxrwxr-x 3 flebber users 4.0K 2007-06-23 15:06 .nautilus
-rw-r--r-- 1 flebber users 3.2K 2007-06-22 05:29 .recently-used.xbel
drwxrwxr-x 2 flebber users 4.0K 2007-06-21 00:40 .themes
drwx------ 3 flebber users 4.0K 2007-06-21 02:26 .thumbnails
-rw-rw-r-- 1 flebber 501 262 2007-06-21 00:34 .xinitrc
-rw-rw-r-- 1 flebber root 9 2007-06-19 23:33 .xintrc
drwxr-xr-x 2 flebber users 4.0K 2007-06-22 05:26 .xmms
-rwxrwxr-x 1 flebber users 100 2007-06-19 21:05 .xsession
-rw-r--r-- 1 flebber users 644 2007-06-23 15:07 .xsession-errors
drwxrwxr-x 2 flebber users 4.0K 2007-06-22 05:17 Desktop
-rw-r--r-- 1 flebber users 3.5K 2007-06-22 05:30 eq.preset
-rw-rw-r-- 1 flebber root 47 2007-06-20 08:54 hopeless
-rw-r--r-- 1 flebber users 3.5K 2007-06-22 05:17 presets.gz
-rw-r--r-- 1 flebber users 872 2007-06-22 05:18 winamp_presets.gz
[root@myhost flebber]#
PS this output featured colour.
Last edited by flebber (2007-06-23 05:24:51)

yeah logged out and in
Updated
alias ls='ls --color=auto'
PS1='[\u@\h \W]\$ '
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# coloured pacman output
alias pacs="pacsearch"
pacsearch () {
echo -e "$(pacman -Ss $@ | sed \
-e 's#current/.*#\\033[1;31m&\\033[0;37m#g' \
-e 's#extra/.*#\\033[0;32m&\\033[0;37m#g' \
-e 's#community/.*#\\033[1;35m&\\033[0;37m#g' \
-e 's#^.*/.* [0-9].*#\\033[0;36m&\\033[0;37m#g' )"
# safety copy, delete & colour
alias rm='rm -i'
alias cp='cp -iv'
alias mv='mv -i'
alias ..="cd .."
alias cl="clear"
alias ll="ls -lhav"
alias ls="ls -v --color=auto"
alias df="df -h"
alias du="du -hc"
alias mv="mv -iv"
alias cp="cp -v"
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
PATH=$PATH:/home/flebber/*
Last edited by flebber (2007-06-23 06:53:43)

Is "pacman -T" like "apt-get install -f" ?

Is "pacman -T" like "apt-get install -f" in Debian?
Last edited by Mr. Alex (2010-12-31 11:06:07)

Mr. Alex wrote:
> What does that do?
From man page:
-f, --fix-broken
Fix; attempt to correct a system with broken dependencies in place. This option, when used with install/remove, can omit any packages to permit APT to deduce a likely solution. Any Package that are specified must completely correct the problem. The option is sometimes necessary when running APT for the first time; APT itself does not allow broken package dependencies to exist on a system. It is possible that a system's dependency structure can be so corrupt as to require manual intervention (which usually means using dselect(8) or dpkg --remove to eliminate some of the offending packages). Use of this option together with -m may produce an error in some situations. Configuration Item: APT::Get::Fix-Broken.
pacman does not let you screw up dependencies unless you specify the "-d" flag... but:
allan@mugen ~
> pacman -Rd python-feedparser
Remove (1): python-feedparser-4.1-6
Total Removed Size: 0.26 MB
Do you want to remove these packages? [Y/n]
(1/1) removing python-feedparser [######################] 100%
allan@mugen ~
> testdb
missing dependency for gpodder : python-feedparser

How to get source code for commands like diff or cat

Hi all
I'm learning c programming and i'd like to read some code for the basic commands on the linux system
I remember apt has one such option that allows getting pakcage source code
is there a similar one for pacman ?
or do i have to search those source code myself ?
and also in BSD system all the codes are availeble in a code repository
thx

diff and cat. Or was that too literal?
Last edited by Ghost1227 (2009-04-18 23:57:55)

How i can "apt-get autoremove" and "autoclean" like debian based?

hi, i would like to know how to do "apt-get autoremove" and "apt-get autoclean" like debian based linux in arch for cleaning the system?
thanks you for this community....

BTW: With Arch, you don't have to! (TM) Or that's the impression I have anyway. See the remove options, there are flags which basically allow you to remove 'unneeded' stuff -when- it becomes unneeded.
For example:
Debian:
apt-get install sniffles - also installs libsniffle, libsniffle-dev
apt-get --purge remove sniffles - leaves libsniffle, libsniffle-dev which then have to be removed via autoremove. I'm not sure under what circumstances this won't even work and you'll end up having to use deborphan or somesuch
Arch:
pacman -S sniffles - also installs libsniffle, libsniffle-dev
pacman -Rcns sniffles - also removes libsniffle and libsniffle-dev
Perfect operating system:
<package manager> <install option> sniffles - laughs and blames it on temporary insanity that you'd want to install anything having anything to do with sniffles.

Apt-get vs Pacman

Hii, I have been using apt-get for a long time, and now I want use Pacaman , what I don't know is
What are the befits and drawback of each one compare to the other?
I havn't open this post for "flaming", I want to know and understand more about this topic.

Mr.Elendig wrote:I also find pacman (if not hevely fragmented) alot quicker than apt-get. But as stated before, it's all probably just in my head.
nope its not all in ur head....pacman at this point is faster then apt-get...and MUCH faster then yum which for some ridiculus reason refreashes EVERYTIME u use it which is massively(sp?) time consuming (sry...it makes me ANGRY!!!!) However apt-get has 15000000000000003r530403403043040340 packages due to debian (i assuming that what ur using is a debian based distro as i have never heard of using apt-get on arch....) (yes that number is an exageration...) ne ways if u ask me pacman is the best out there and i have used alot...well not really just 3 or 4 .....i use Fedora as well and there are packages that i can easily install in arch using pacman that i cant in fedora...so pacman > apt-get > yum (althou yum has a cool rollback feature that allows u to restore ur sytem to a specifig time ..like say 5 minutes ago or 3 days ago..etc...but consider that pacman has not been here as long and youll see that pacman should IMO be way ahead in a few years...look at all the new distros that are starting to use pacman....its not like debian..but still..its growing ..baby steps hhahah

I would like to get the password for Marley 11 guest

Please can I get the password for Marley 11 guest

Hi Kit,
I understand your question now and I can point you to some usefull resources. First, you mentioned the three components, the chassis (which contains the FPGA), the ReamTime controller and the module. You also of course have your PC which is what the user will interface with to perhaps view the data on a graph. You will need to create a new FPGA project and you will have several key components in that project:
1) a VI on your FPGA target that is programmed to do I/O from your 9233 module. This VI must be created and then deployed and compiled onto the FPGA (this is like programming the chassis)
2) a VI on your RT controller that will use a DMA fifo to get the data from the FPGA. You may also have some signal processing or some other logic on this VI. This VI must be deployed to the RT controller
3) a VI on your host computer that will read data from the controller, probably save it to a disk and display it on a graph.
I would reccamend looking at a few resources to help you get started:
1) FPGA Design, Development and Programming Tutorial
2) Getting Started with the FPGA Module from the LabVIEW help files
3) LabVIEW FPGA Module On-Line Tutorial, this is a video tutorial that will be helpful
4) Use the LabVIEW example finder (in LabVIEW go to help»Find Examples) and under the "search tab" type in 9233. Open the 9233 getting started project that will populate in the list of available examples for the 9233. This project will serve as a starting point for your cRIO system programming.
I hope this helps. Thanks and have a great day.
Stephen S.
National Instruments
1 Test is worth 1000 expert opinions

I was downloading an app and it wasnt downloadnig so i turned my ipod off and now its a just a black screen with the the loading circle. Its been like that for 10 hours. How do i get back to my home screen?

I was downloading an app and it wasnt downloadnig so i turned my ipod off and now its a just a black screen with the the loading circle. Its been like that for 10 hours. How do i get back to my home screen? or how do i get the litle loading circle to go away.. it wont even load into itunes

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How do I get a reminder for birthdays on my "Contact" list to pop up on my e-mail, like FaceBook does?

How do I get a reminder for birthdays from my "Contact" list to pop up on my g-mail, like FaceBook does? In other words, how can I set up a reminder for birthdays to come up on my g-mail from my Contact list, perhaps a few days before the birth date? I use e-mail more than FaceBook; and my Contact list is larger and more complete. Thank you. Please e-mail your answer to: [email protected]

Firefox does not have a contact list. Any contact list that you have will be part of the email service that you are using, you will need to check with the support for that email service to see if they offer such a feature.

The bottom part of the screen is like bright it looks all weird i cant see annything in that part my ipod still has the 1 year warranty do u guys think i can get it fix for free or would i have to pay?

The bottom part of the screen is like bright it looks all weird i cant see annything in that part my ipod still has the 1 year warranty do u guys think i can get it fix for free or would i have to pay?

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. If you iPod is defective, within warranty and not abused, Apple will exchange it at no cost.

CAN SOMEONE PLEASE HELP ME? I HAVE BEEN TRYING TO RESTORE MY IPHONE FOR THE LAST 6 HOURS AND EVERYTHING GOES THROUGH OK UNTIL IT GETS TO THE RESTORING IPHONE SOFTWARE, IT LOADS 1/2 THEN FREEZES. IVE LEFT IT LIKE THAT FOR AT 30MINS AND NOTHING HAPPENS. IVE

HI THERE,
CAN SOMEONE PLEASE HELP ME? I HAVE BEEN TRYING TO RESTORE MY IPHONE4 FROM IOS 4.3.3 TO 5.1.1 FOR THE LAST 6 HOURS AND EVERYTHING GOES THROUGH OK UNTIL IT GETS TO THE RESTORING IPHONE SOFTWARE, IT LOADS 1/2 THEN FREEZES. IVE LEFT IT LIKE THAT FOR AT 30MINS AND NOTHING HAPPENS. IVE TAKEN THE CORD OUT AND HAD TO TURN PHONE OFF AND RESTART, THEN LOAD IT BACK UP TO ITUNES ALL OVER AGAIN. MANY TIMES!!!!! IVE CHANGED CORD AND USB STILL NOTHING? IVE GOTTEN TO THE POINT WHERE I MAY HAVE RUINED IT ALTOGETHER AND NEED TO BUY A NEW PHONE? PLEASE I HOPE SOMEONE OUT THERE CAN HELP?:
MANY THANKS

You may not get a response as you are shouting at everyone.
All caps indicates shouting, is considered rude, and is difficult to read.
Many will not read such posts.
Try turning off you caps lock and asking again.

How to get the command line interface for WRT160NL router

hi,
How can I get the command line interface for WRT160NL router. please suggest.

If you’re trying to access the web-based interface of your router, just use its default IP address (192.168.1.1). The Username is left blank and the Password is "admin". Here’s a quick link on how to do that.

Apt-get like interface for pacman

Similar Messages

Maybe you are looking for