AR - How to Complete and Incomplete a Transaction

Hi,
We have a requirement, where after a transaction is created by AutoInvoice, we want to make the Transaction Incomplete, so that it cannot be posted to GL. Send the Transaction for some approval and once approval is obtained, make the Transaction complete, so that the normal Transaction process can continue.
We could not find any API to make a Transaction Complete or Incomplete. Can somebody suggest how to achieve this?
Thanks.
Prabhat

I tryied to use in the client the statement EntityTransaction transaction = myBean.getTransact(); but I receive the EJBException: Cannot use resource level transactions with a container managed EntityManager
I just need to start a transaction something like this: transaction.begin(); and finish the transaction, something like this: transaction.commit();
Does anybody can help?

Similar Messages

How to start and finish a transaction using EJB 3.0 in JDeveloper

Hello everybody!
Does anybody can explain how to start and finish a transaction using EJB 3.0. I need to start a transaction insert some information in some tables and if everything was fine commit the information.
I put the annotation @TransactionManagement(TransactionManagementType.BEAN) in my session bean and @Resource SessionContext ejbContext; but I don't what anything else I have to do.
Any help will be appreciate.

I tryied to use in the client the statement EntityTransaction transaction = myBean.getTransact(); but I receive the EJBException: Cannot use resource level transactions with a container managed EntityManager
I just need to start a transaction something like this: transaction.begin(); and finish the transaction, something like this: transaction.commit();
Does anybody can help?

How to complete the incompletion sales documents

Hi,
We have around 8600 old sales documents (incompletion log, TCode V.01) for which subsequent documents created for some and now we have an requirement to clear/convert all the documents to completion or not to display under this transaction.
SD_SALESDOC_COMPLETION
I have found the above program, but not sure again whether this will help us out...
Please let me know your views on how to solve this situation if you have already come across.
Thanks in advance....
Regards,
Siva.

Hi,
This is not used for completing the Incompletion logs of the Sales Orders.
This report (T. Code - V_MACO ) checks whether old sales documents could be completed. In this case the the status field MANEK (Manual Completion of Contract) will be set in Table VBUK (Sales Document: Header Status and Administrative Data)

How to cancel an order if transaction not complete

How to cancel an order if transaction not complete

Presuming you're referring to a purchase from the iTunes Store, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. Refunds are not guaranteed, but iTunes support should be able to help you in one way or another.
Regards.

When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

Hi
And without info - it's near to impossibly to help. Try my general troubleshooting note:
Troubleshooting note
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

HT1420 My laptop crashed completely and I need to authorize a new laptop to enable it sync with itunes. I have 5 computers authorized so I am unable to add another one so I need to unauthorize the bad laptop that is no longer working. How do I authorize n

My laptop crashed completely and I need to authorize a new laptop to enable it sync with itunes. I have 5 computers authorized so I am unable to add another one so I need to unauthorize the bad laptop that is no longer working. How do I authorize new Laptop?

You can only deauthorize everything to do that. Click on Account under Quick Links. You can deauthorize all five there. But you can only do this once a year.

How to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

how to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

There's not much sense in purchasing a Mac to run only Windows on it. Keep in mind that drivers for Windows are a secondary concern for Apple. While Windows will typicall run fine, things like power managment are not optimized under Windows (you'll get less time on battery while running Windows). You will also not be able to install firmware updates. Firmware updates might be necessary whether you run Windows or OS X as they are updates to the code in your hardware and are not OS-specific. You must be running OS X in order to install a firmware update. You can do this even if you boot off of an external drive with OS X installed on it. At the very least, you should keep just a small partition for OS X on your internal drive.

How to completely turn off Bluetooth and Wireless

Hey everybody,
I'm running Windows XP SP3 via Boot Camp and I was wondering if anyone can assist me in how to completely turn off Bluetooth and Wireless connectivity so that I can reserve as much batter life while being in class taking notes without a plug-in source, but not uninstall. I know there is a Bluetooth control panel and I disabled it there but under "connect to" its still remains there. Basically I want to have the Bluetooth and Wireless turned off completely when I startup and still have the icons shown in the taskbar to let me know that they are still there.
Thanks!

Joergen Thomson, I can see that you have the same thoughts like I do, I wish they could release a software that is stable and better then this.
I dont have the energi or time to report all flaus back to cisco, this product have taking to much of my time and frustration already. Thank you so much for all the time you spend to try get this product stable and hopefully a good product.
I have a costumer that have a webservice that is IP restricted, For now I have to define more then 93 policys openening for the same service because this doesnt handle address list and groups. And all the times I had to set it back to factory default becasue of HTTP Admin server stopped, VPN Problem, Firmware Upgrades, "Packet Loss" and so on takes alot of time becasue I need to reconfig policies back.
For now to they release a firmware is stable I have take this piece off the network and put the back a old Fortinet 60 box.

I downloads the latest iTunes software update and it properly installed. But, I cannot close the window showing it was completed and the blue completion bar is full but cannot cancel or close it either. Any ideas on how to clear that out and close the

I downloaded the latest iTunes software update and it properly installed. But, I cannot close the update window showing it was completed and the blue completion bar is full but cannot cancel or close it either. Any ideas on how to clear that out and close the window. Tried to quit on both the big window and the software update title in the menu bar. No luck.

Tried that by shutting down via the power button only as the normal shutdown was nixed by the open window issue. It did not help. Found a very similar question in the discussions and it recommended "Force Quit". That worked and the update works normal and the window is gone. Thanks!

How many reocrds update in call transaction method and session method

The flat file having the 10 records but the flat file having the 5 th record is error so in session method how many records will update and in call transaction how many records will update.
can you provide with detailed information like in synchrnous mode and asynchronous mode
Regards
reddy

hi,
session method :up to 4 records will be updated as it is in synchronus mode.
Call transaction method : except 5 th all 9 records will be updated as it is assyncronous method.
Regards
sandeep Reddy

Hi i got a few free app before and did not download them completely and dont want to do this but they stay in my download list and start automatly when i connect to itunes store and going to crazy me how can i remove them from my account for ever please h

hi
i got a few free app before and did not download them completely and dont want to do this
but they stay in my download list and start automatly when i connect to itunes store and going to crazy me
how can i remove them from my account for ever
please help me
thank you

Try Here > https://discussions.apple.com/thread/4074945?tstart=0

Is it possible to see how many COGI errors I have cleared in previous month and in which transaction I can able to see that record?

Is it possible to see how many COGI errors I have cleared in previous month and in which transaction I can able to see that record?

Mukundan,
Refer Below SAP Note 1868084 - FAQ: Transaction COGI
Question:
Is it possible to log the actions in transaction COGI?
Answer:
SAP Note 309050 provides a modification but it can only be used temporarily. Also refer to SAP Note 1894587 in this context. It provides a report for displaying and deleting the data records in the log table AFFWPRO.
BR
KK

How to download a form from the web, complete and save it?

How to download a form from the web, complete and save it?

Download Adobe Reader. If the form author allows filling out digitally, you can do so and save it again.
Mylenium

There were pictures originally on my computer and were somehow take from my computer completely and moved to my iphone. On my iphone it doesn't let me delete those photos and i have no idea how to move them back to my computer. HELP? I need to keep them.

There were pictures originally on my computer and were somehow take from my computer completely and moved to my iphone. On my iphone it doesn't let me delete those photos and i have no idea how to move them back to my computer. HELP? I need to keep them, they are valuable to me and were supposed to have been on my computer. I have no idea how to move them back since my computer barely lets me open my iphone and acknoledge those moved photos. Please help me!!

Also in itunes on my computer i deselected the photos and their still on my phone.

ODI: How determine if auto load is complete and all data has gone through

Hi All,
I am currently executing the below scenario and following http://docs.oracle.com/cd/E26070_11/otn/pdf/integration/E26075_01.pdf for the same.
SRC: AGILE
TRG: OBIEE
As per the above i get out of the box packages which are used and executed , since this is something which comes out of the box how to determine whether my data load is complete and data has gone through from SRC->ODM->TRG?
My Operator and sessesion show success and secondly i don see any errors in logs as well .
Any help ? Anybody already experienced above scenario please help .
Cheers,
Mak

So who do I believe?
Blog: http://www.jamoroki.com
James King
about.me/jamoroki
<http://about.me/jamoroki>

AR - How to Complete and Incomplete a Transaction

Similar Messages

Maybe you are looking for