Architectural issue

We are providing an architecture for 9i Application server based applications to one of our clients. Our client is already licensed with the Oracle 9i AS on IBM AIX based systems. As our future plan grows we might implement applications with Oracle Collaboration Suite and Oracle Developer suite. Now I have some basic doubts here:-
1.Suppose we are installing the 9iAS on IBM AIX based system and can we have our 9i database on Solaris SPARC or LINUX x86 system ?
2. Now I understand the fact that Oracle developer suite is not supported for IBM AIX based systems. In this case can I purchase Developer suite for NT or Solaris and then develop components using this and deploy the same on 9iAS on IBM AIX system and the database on the NT/solaris server.
3. What about the collaboration suit, should this also be for IBM AIX system to talk with 9iAS on AIX server and 9i database on Solaris.
Please help me with the above issues so that I can start with my arcitectural suggestions.

One more help, please correct me if I am wrong:-
With developer suite 9.0.3 we will only be able to use Forms, Reports and JDeveloper.
With developer suite 10g only we will be able to use Clickstream intelligence builder, Warehouse builder, SCM, Discoverer and Designer.
One more doubt i have is aren't the Clickstream intelligence and Discoverer getting installed along with 9iAS? Then could you please elaborate how I am benefitted more with the Developer suite with respect to these tools.
Thanks

Similar Messages

MPLS L3 and L2 architecture issues

Hi,
I'm on an MPLS IP-VPN architecture and I would like to add a point to point L2-VPN (VLL ?).
Can we do L2-VPN on a cisco 2800 series ? 3800 series ?
Can I setup a lease line beetween a 3800 and a 6500 ?
I can see on my 3800 that I have the mpls L2transport commands but it doesn't seem to work on a vlan interface (which seems to be the easiest way to setup a virtual lease line as explain here: http://www.cisco.com/en/US/tech/tk436/tk428/technologies_white_paper09186a00800a3e69.shtml#wp41167)
Are there any issues to add L2-VPN on PE already use for L3-VPN ?
Best regards !

On my cisco 2800 series :
sh ver
Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4(4)T7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Tue 28-Nov-06 18:37 by kellythw
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
ROUTER_2800 uptime is 8 weeks, 6 days, 19 hours, 17 minutes
System returned to ROM by power-on
System image file is "flash:c2800nm-spservicesk9-mz.124-4.T7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 2811 (revision 53.51) with 251904K/10240K bytes of memory.
Processor board ID FCZ110473CW
6 FastEthernet interfaces
1 ATM interface
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
sh mpls l2transport doesn't exist
On my cisco 3800 series
ROUTER_3800#sh ver
Cisco IOS Software, 3800 Software (C3825-ADVENTERPRISEK9-M), Version 12.4(11)T, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Sat 18-Nov-06 23:16 by prod_rel_team
ROM: System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)
R_LPRS_3825_PE_MPLS uptime is 13 weeks, 3 days, 17 hours, 18 minutes
System returned to ROM by power-on
System image file is "flash:c3825-adventerprisek9-mz.124-11.T.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 3825 (revision 1.1) with 224256K/37888K bytes of memory.
Processor board ID FCZ1013704D
4 FastEthernet interfaces
2 Gigabit Ethernet interfaces
1 Serial(sync/async) interface
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
479K bytes of NVRAM.
62720K bytes of ATA System CompactFlash (Read/Write)
Configuration register is 0x2102
sh mpls l2transport vc 200
Local intf Local circuit Dest address VC ID Status
Tanks again

XI Architecture issues

Hi,
Since XI opens an enterprise network to the internet, are there any documentation on how to organize our system landscape with XI:
set up DMZ before XI?
security issues (firewall, ports)?
Regards ,
Yann Le Blevec

Hi Don,
Thank you for the Reply
We are in the process of opening a ticket with SAP.Yeah it is complicated to debug the issue.
If i am Correct the Job Server is used only for Scheduling Right !!
But the Crystal Report that i am talking about is being Viewed on Demand and Not Scheduled.
One quick question , Is there any limit for the records that RAS can handle in single shot?
{Specified in any Sap Docs}
Help appreciated.
Regards,
Ram G

Determining the project architecture issue

Hi,
I have a architecture designing problem.
First version:
I had all the UI, Business manager and the persistence layer in the client side. So the UI came very heavy weight.
Second version:
I have the User Interface layer and Service Layer(will have the business and persistence layer)
We have the embedded database. Since the persistence layer is present in the service side, i am having the embedded database in the service side.
(it is more meaning full to have the database at the persistence side).
Case 1:
If i want to have the service as a common, for all the customers, then the embedded database will be common for all the customers.
Case 2:
If i give the service to each customers only, i will have unique db for each customers.
But to resolve this problem, if i want to have the database at the client side itself,
then it will not be good because, the persistence layer is only at the service side.
So i have to make the persistence layer at both client and the service side.
My aim is to make the UI as light weight.
I am so much confused.
May i kindly know, how to correct this problem.
Thanks in advance.
NANDAKUMAR.T

Hi PKR,
Thanks for the reply.
My Expectation: To reduce the client(exe) size, as small as posible.
My problem: "The Embedded DB is in the service side". So obviously the client(exe) file will be less in size. But for each customer i have to give the service as a separate copy. Then only they will have their data alone.
I want to achieve my expectation and to overcome, the facing problem.
Is there any way to do it and looking towards it.
Thanks in advance.
NANDAKUMAR.T

Architecture Issue (MVC)

ARCHITECTURE DESIGN COMMENTS
We have designed a java system for one of the crucial projects.After that due to some reasons we are asked to restructure it. Here I?m presenting 2 variations with all the details.
I sincerely request your comments on this, and if you have a better solution with the existing means(jsp,javabean,servlet) please let us know.
The basic things I need to know is that:
1. Feasibility of this model.
2. performance.
3. Any drawbacks and how to over come them.
I MODEL
(valueobject)
jsp----->Servlet(Controller)------------------------------->(DBMangager)--------->Database
(Since this is not taking the image-i could not able to draw the entire thing properly)
Process
The process in the first model is that
1. All the parameter names and values are collected in a HashMap in the controller.
Ex. Request.getParameterNames()
while ( e.hasMoreElements () )
String name = ( String ) e.nextElement () ;
String val[] = request.getParameterValues ( name ) ;
hm.put ( name , val ) ;
2. Then the controller sends it to the constructor of the Assembler.
try
fv = new FwAssembler ( hm , txn_no , comp_code ) ;
3. The assembler segregates the code and assigns to the corresponding value objects.Here value objects are parameters to the Assembler.Means once the corresponding value objects are set, these value objects are set to the Assembler with setValueObjects. So that now the assembler contains value objects which represent the data.
An extract:
public FwAssembler(HashMap hm, String tx_no, String comp_code)
setComp_code(comp_code);
setTxn_no(tx_no);
ftran = new FwTransaction(tx_no);
aprofile = new ApplcantProfile(comp_code);
cvo=new CompProductsVO(tx_no);
lfile.logErr("FwAssembler","1");
The following corrosponds to the automation plan.
Depending upon the value of strAutomation remaing values will be considered.
String n1[] = (String[]) hm.get("strAutomation");
strAutomation = n1[0];
ftran.setStrAutomation(strAutomation); // this gives whether automation plan is yes or no
String n270[] = (String[]) hm.get("strDateimplemen");
try
if (strAutomation.equalsIgnoreCase("y"))
String n2[] = (String[]) hm.get("strDateimplemen");
strDateimplemen = n2[0];
ftran.setStrDateimplemen(strDateimplemen);
String n3[] = (String[]) hm.get("decCostinvolve");
decCostinvolve = Double.parseDouble(n3[0]);
ftran.setDecCostinvolve(decCostinvolve);
String n4[] = (String[]) hm.get("vcPartauto");
vcPartauto = n4[0];
ftran.setVcPartauto(vcPartauto);
String n5[] = (String[]) hm.get("intNoworkers");
intNoworkers = Integer.parseInt(n5[0]);
ftran.setIntNoworkers(intNoworkers);
catch (Exception kk)
lfile.logErr("strAutomation", "Exception kk", kk.toString(),
kk.getMessage());
4. Once the Assembler is set, the controller will send Assembler to the DBManager.
try{
b = fbean.insertFwworker(fv, txn_no, comp_code);
catch(Exception bean)
lfile.logErr("","bean",bean.toString(),bean.getMessage());
5. DBManger, with the help of value objects will insert the data into the data base.
6. This method will return true, and if it is true the controller will send it to the next jsp page.Else it will display the error page.
I I? MODEL
In my model II- the most significant difference is that :
While sending the data from Controller to the Assembler I have not used a HashMap, but in my model II, I just send the request object.
cassembler=new CfcAssembler(request,txn_no,comp_code);
ofcource what I?m planning is that:
Instead of putting it in a Constructor I want to send it in a method in that class.
I had the following advantages got by doing so:
1. My coding is considerable reduced to a greater extent.
public CfcAssembler(HttpServletRequest request,String tx_no, String comp_code)
setStrTrxn(tx_no);
setStrCompCode(comp_code);
setSelIcfctype(request.getParameter("selIcfctype"));
setStrCfcdesc1(request.getParameter("strCfcdesc1"));
if(request.getParameter("decQty")!=null)
setDecQty(Double.parseDouble(request.getParameter("decQty")));
else
setDecQty(decQty);
setStrPurpose(request.getParameter("strPurpose"));
if(request.getParameter("cbEmail")!=null)
cbEmail=request.getParameter("cbEmail");
if(request.getParameter("cbPhone")!=null)
cbPhone=request.getParameter("cbPhone");
if(request.getParameter("cbPost")!=null)
cbPost=request.getParameter("cbPost");
strMethodNotify+=cbEmail+cbPhone+cbPost;
setStrMethodNotify(strMethodNotify);
2. My performance I think is improved, because I?m not using any String Arrays.
3. The readability of the code is also good.
Where I?m not sure
In the Assembler class I?m importing the package javax.servlet.HttpServletRequest.
1.Can this Assembler class is made as a java bean.
2. Will this model also fulfills the MVC architecture.
Please fill in me with all the details.Your earliest reply in this matter is highly appreciated,as we are at a crucial stage.
Thanking you
pressy

I would be surprised if your scaling bottleneck occurs dumping an HttpServletRequets parameter list into a Map. So, while there may be a slight performance/memory hit in populating the Map, it should be negligible as everything is already in memory.
From a design perspective, I like #2 better. You don't want to import the http.servlet classes everywhere in your domain model. You should theoretically be able to switch either your view or your persistence tier without affecting the domain model.
Servlet classes are tied to a web presentation framework. Not that a sane person would do such a thing, but what if you decided to switch your UI to Swing? Now, all those HttpServletReqeust objects are useless, but a Map still works fine.
On a more realistic example, what if you decided to switch to SOAP and web services instead? The ServletRequest and SOAP request could both have adapters written that generate the same Map. Now, all your code past the Map is the same regardless of what type of request you receive.
Now, I have never completely changed my view or even my persistence tier in a real-world application. However, I do see the validity or keeping the model agnostic. So... no Servlet classes should go there. IMHO, that is.
- Saish
"My karma ran over your dogma." - Anon

Max number of records in a cube & architectural issues

Hi,
Sorry if my question was already done but i can't find the same question with the research button (may be i have not the good words for search, I'm not english).
I am on a BIG BIG IP project. The forecast volume of planned records is about 1.000.000.000 records a year. So we choose to split records toward many cubes.
1) Is there a maximum number of record supported by a cube to be planned? We planned to put 100.000.000 records maximum on a cube to be planned. Is it too much?
2) If I make 100 cubes (one for each organizational entity) with 10.000.000 records per cube and if I "plug" a planning layout on these 100 cubes with a multiprovider, will IP:
spread time to search the good cube to write in (due to the selected entity) in the 100 cubes (too much time !), or,
search directly in the good cube (thanks to user exit that match cube with selected entity), so the response time will be about the same as the one for 1 layout plugged on 1 cube of 10.000.000 records?
Thanks a lot, and sorry for my english language level
Georges

Hi Georges,
Having too many records in the cube should not be very detrimental for performance of planning application as long as you can ensure that the data volume that you fetch at one go is restricted to reasonable limits, using restrictions in filters (the more restrictive the better). Take care of this while modelling both your planning functions/sequences and input-ready queries.
I understand that you'll need to create a multiprovider for reporting purposes, but if you dont need the data from more than one cube for planning purpose, it will be better to create the aggregation level (and rest of the planning model) on top of individual cube. In case, you want to use the same planning function/input queries for multiple cubes (which will probably be the case), you can create the aggregation levels on the multiprovider but make sure you restrict the characteristic 'infoprovider' properly in the filter restrictions to avoid the function reading unnecessary data from many cubes.
Hope this helps.

Topology - Physical Architecture issues

Hi,
I am trying to reverse engineer and add tables from SQL server and getting the following error.
ODI-17549: Source data type "int identity" for thetechnology "1017" does not exist
Please help. Thanks for your time.

ODI does not package all data types for all technology. eg: MSSQL demo database contain many user-defined datatype
when you use rkm mssql:
1)for double type, there is a bug found, length field is reversed wrong, you can manually modify the rkm
2)when reverse foreign key, parent catalog field does not filled
even using rkm, you still face datatype not found possibility
1)you can manually add datatype in topology navigator
2)reverse data type on an existing data server, this method will reverse many data type automatically, but it also import noises, suggest you duplicate the technology, then try on the duplicated one at first

Architectural Issues with AIA Asynchronous MEP

Hi,
We are implementing an AIA service which should follow an Asynchronous (request/delayed-response) MEP. I need some advice from people who have implemented this pattern.
The rough requirements are that we have two ABCS Requesters for two different systems, which read from files and call the EBS (eventually there may be an EBF involved as well but don't want to confuse the question). The response for the operation will take up to 10 minutes but we need to deal with the response when it comes back at the requester level.
It looks something like this
ABCSRequester1
<--> EBS <--> ABCSProvider1
ABCSRequester2
My question is, why does AIA only create a single port service in ABCS Provider and it forces me to call back via a seperate WSDL when I select the request/delayed-response option in he service constructor.
This means that I must have two EBS services (one EBS Request and one EBS Response) - unless I am missing something (which is entirely possible) and dynamically route the response to the appropriate endpoint and then correlate it.
I understand this is possible, but it seems an overkill to me when I could have two ports on the Provider ABCS wsdl (which the service constructor does not create), which I could then callback on and the EBS will then create a callback to the calling client. This would make the whole process easier to manage IMO.
I could change the generated WSDL and add a callback port, but as the service constructor generates the ABCS like this, I do not want to just alter this without understanding maybe why I shouldn't.
Do people recommend the Fire and Forget Async MEP as seems to be documented in AIA documentation for a scenario like this and if so why?
Have people implemented the two port single WSDL solution (as is created by SOA Suite if you build a service as Async from scratch) as an AIA provider?
If anybody has a sample Async project in AIA showing this sort of scenario, I would love to see it.

Hello,
Provider ABCS does not need to have 2 port types for this scenario. You would have 2 port types in Provider ABCS only if it interacts with provider application in an asynchronous manner. In that situation, provider application will be sending the callback response by invoking the service operation defined in the callback response port type within provider ABCS.
Your question is more about why we need to have 2 EBS - one for processing request and another for processing callback response. For this situation, you do not have to add additional port type in provider ABCS WSDL.
You can certainly leverage the mediator’s call back facility to eliminate the Response EBS that is normally recommended for processing the callback. 11g mediator does have the support and you can leverage that.
We did look at this feature during the 11g adoption and decided not to leverage this feature after prototyping for the following reasons:
1.     EBS Operations need to support fire-and-forget as well as asynchronous delayed response MEPs. We had to support this functionality of Requester ABCS at run time indicating in the EBM whether it needs the response or not. EBS.Operation would be invoked by both fire-and-forget and asynchronous delayed response MEP requesters; and for the delayed responses, ResponseEBS.Operation would be used. Hardwiring the MEP at the EBS Operation level would lead us to create 2 operations – one for fire-and-forget and another for asynchronous delayed response
2.     This stateless programming model allows us to be OSB-friendly
3.     To be backwardly compatible with 2.x services
Any custom solution built by you can certainly leverage the 11g Mediator's callback facility provided your requester ABCS is coded always to receive a callback from EBS. You could certainly leverage this pattern if you dont have a need for Requester ABCS to invoke EBS using fire-and-forget pattern.
Ravi

BO Architecture Issue

Hello Experts,
I have a scenario
I have 2 physical machines(4 VM images)
Each machine will have 2 Vmware machines running on them.(1 for BO & 1 for Web application) * 2
Due to license i can only have 1 BO server active, the other one will remain passive(Use of MS clustering to active this.)
The web serve VM machines will not be clustered.
Now, in such a scenario, will i have install Apache on the web server machines & do a load balancing
or
just clustering Tomcat will suffice ?
or
will have to install HTTP server?
Cheers,
AK
Edited by: Alok Kakani on Nov 19, 2010 3:44 PM

Your Clustering will behave effectively only if you have tomcat installed for every server
you will have to install 2 tomcat of 2 server for load balancing...1 tomcat for 2 VM's
Thanks,
Ganesh

Forte 30N2 : Message duration SO restart after a crash issue

In our application, the batch processes are based on a 'Controller-Processor' pattern. A controller starts many processor tasks as parallel processes.
The problem is that our Controller process crashed. However, by that time, many processor processes had already been started by it. These processor tasks were not terminated when the controller crashed.
Since the controller process is of Message Duration, it 'restarted' automatically after the crash. With this new start, all the processor tasks were started again and therefore were executed twice.
Now we are looking for a way to terminate the processors automatically if the controller crashes. Is there a way to do this in Forte or do we have to code this explicitly ?
If not, we can stop start of a processor if it is already executing. But then, how do we get a notification of completion of a previous execution ?
Any ideas will be appreciated.
Please let me know if the problem description is not clear.
Thanks and regards.
Deepak

"Since the controller process is of Message Duration, it 'restarted' automatically after the crash" --NO, the controller was re-started automatically because Forte allways tries to re-execute the method of a SO marked to have Dialog Duration=Message. Apart of that, the SO will be re-started ONLY if the Forte Autostart feature has been enbled in your Forte Environment, otherwise it won't re-start.
Your problem is more an architectural issue than a Forte one. The children tasks can not notify their parent about a problem (ussually by reporting an exception event) because they were started in a different partition and Forte have partition boundaries when handling the multi-threading for tasks executed in cascade. (Task1-->Task2-->Task3).
Even if your children tasks can report an exception event to the parent SO, there is still a timming issue: While re-starting the controller a children task can report an exception event, but it wont be listened since the controller is still re-starting.
Hope this helps..

Multiple ECC to one PI architecture

Hi SDN Experts,
We are in a test phase of a project and facing some architectural issue.
My Client XX has 2 ECC tracks and already one project (P1) with few interfaces gone live.
Existing project (P1) landscape is:
PR1 (Dev) -> PR2 (PPD) ->PR3 (Prod)
For the new project (R1), client has asked to use the new ECC track:
ECC1 (Dev) -> ECC2(Test)-> PR3 (Prod)
PI landscape:
PIB (Dev) -> PIC (PPD) -> PID (Prod)
For project P1, Live interfaces in PI (w.r.t. ECC) use the following BSu2019s:
BS_ECC_PR1_DEV -> BS_ECC_PR2_PPD -> BS_ECC_PR3_PRD
Project R1 interfaces in PI (w.r.t. ECC) uses the following BSu2019s:
BS_ECC1_DEV -> BS_ECC2_PPD -> BS_ECC_PR3_PRD
Points to note:
1)The rule here is once a project goes live, the ABAP development moves to P1 track and so after goe live for any change request or defect of R1 we need to connect PIB system to PR system( P1 project business system).
2)We are in test phase of project R1. Currently all interfaces are configured with EERP system and not a single interface of project R1 has ID configured with PR system.
This is little tricky to understood, i am not sure if i have explained it correctly.
I hope some of you might have already experienced such kind of issue, so i request you to spend some of your valuable time and let me know what is the best way to solve this considering the following:-
1) For all project the final ECC production system is same and a single business system (BS_ECC_PR3_PRD) needs to be used.
2) Project P1 is already live with 10 interfaces.
3) Project R1 is in end of test phase and we have more than 100 interface (with IDoc, proxy etc)
4) Minimum effort and without touching existing live interfaces.
Thanks !
Cheers
Biplab Das
Edited by: biplab das on Aug 9, 2011 9:29 PM

Well.. we have another twist here   . .
In QA for the project track we have 3 separate ECC system.
ECC21(System Test)
ECC22( Integration Test) and
ECC23( UAT).
so the question i have here is
1) is it possible to define a 1:n transport target in SLD?
            ECC21
ECC1   -- ECC22
           ECC23
2) if option 1 is possible, then do we need to create 4 seperate configuration object for all interface?
3) Will the configuration objects for ECC21,ECC22 and ECC23 will be created automatically in QA , or manually need to be created?
Edited by: biplab das on Aug 11, 2011 1:31 AM

Excise tab is not appearing in Import of STO material-MIGO display

Hi Guru's,
Excise tab is not appearing in Import of STO material-MIGO display.
Find the Process steps below.
1)Stock transfer order using NB document type-(Company codes are different)
2)VL10B
3)VL02N-PGI
4)Customs Invoice in Indian rupees.
5)Capture excise invoice-J1IEX(Capture excise invoice w.r.t PO not STO)
6)Goods receipt with Reference excise invoice(Excise tab appearing while posting goods) MIGO
7)Post Excise invoice--Accounting entries everything is correct.
After posting the MIGO when we display Material document in MIGO, excaise tab is not appearing for this scenario only.Rest of all Excise tab appearing.
Note:In J1IEX display of excise invoice in Reference document2 field Material document should be there but not showing its empty field.
Thanks,
VR
Edited by: get_vr on Feb 10, 2010 9:08 AM

Excise captured & posted using J1IEX using 2 step procedure won't appear in MIGO screen.
Display excise invoice using J1IEX(using vendor excise inv. no. or internal document no)
Only excise captured & posted in MIGO(Single step) will be appear in display of MIGO screeen.
Check SAP Note 952287 - CIN: Limited Functionalities in Country Version India -CIN -Q.no.5
5. Incoming Excise Invoice capture at Blocked stock 103 is not
supported in CIN.
The capture of incoming excise invoice is strictly advised to carryout at
unrestricted stock and not at blocked stock(103/105) due to architectural
issues. The capture at blocked stock may cause wrong excise posting.

Excise Tab is not appear in the MIGO display --- Import Process

Hi Experts ,
Excise tab is not appear in the display of the material document in Import process.
Process flow.
1. Import Po.
2. Customs clearing (MIRO)
3. Capture excise invoice against the Import Po.(Reference to MIRO document )
4.MIGO with movement type 103, in excise tab i selected only refer the excise invoice , here excise ta is coming . Lot is also generated .
after posting the material document , excise tab is not appearing against the material document .
5. post excise against the excise invoice .
Please help.
Thanks
SAP MM
Edited by: Subbas on Aug 16, 2010 11:58 AM

Excise captured & posted using J1IEX using 2 step procedure won't appear in MIGO screen.
Display excise invoice using J1IEX(using vendor excise inv. no. or internal document no)
Only excise captured & posted in MIGO(Single step) will be appear in display of MIGO screeen.
Check SAP Note 952287 - CIN: Limited Functionalities in Country Version India -CIN -Q.no.5
5. Incoming Excise Invoice capture at Blocked stock 103 is not
supported in CIN.
The capture of incoming excise invoice is strictly advised to carryout at
unrestricted stock and not at blocked stock(103/105) due to architectural
issues. The capture at blocked stock may cause wrong excise posting.

Need Help On this(solve these 2 applications)

Hello All,
Find below the questions for Snooker scoreboard application programming in java and second one is an applet. Please solve the two applications and send me the code immediately to [email protected] and [email protected] .
I have the exam tomorrow and any help regarding this is appreciated.
1)
UNIVERSITY OF SUNDERLAND
SCHOOL OF COMPUTING AND TECHNOLOGY
MODULE CODE:      COMM3C
MODULE TITLE:      Java Network Programming
MODULE ASSESSOR:      Adrian Wadsworth
ASSESSMENT:      One of Two (Referred/Deferred)
TITLE OF ASSESSMENT:      Individual Assignment Snooker Scoreboard Application (4 pages)
MODERATED:      May 2006
PLEASE READ ALL INSTRUCTIONS AND INFORMATION CAREFULLY.
This assignment contributes 50% to your final module mark.
Please ensure that you retain a duplicate of your assignment. We are required to send samples of student work to the external examiners for moderation purposes. It will also safeguard in the unlikely event of your work going astray.
THE FOLLOWING LEARNING OUTCOMES WILL BE ASSESSED:
Knowledge of:
a.      Critical awareness of the issues and problems associated with the development of programs to run in a networked environment      �9
b.      Critical understanding of the Java and the web      �9
c.      Architectural issues of relating to distributed systems
d.      Critical awareness of network programs and network protocols      �9
and ability to:
e.      Design and implement a Java applet or application      �9
f.      Critically evaluate network technologies for specific requirements
g.      Design test a Java based on-line systems      �9
h.      Work as part of a team to develop a component based system.
i.      Use and critically evaluate Software Engineering tools      �9
IMPORTANT INFORMATION
You are required to submit your work within the bounds of the University Infringement of Assessment Regulations (see your Programme Guide). Plagiarism, paraphrasing and downloading large amounts of information from external sources, will not be tolerated and will be dealt with severely. Although you should make full use of any source material, which would normally be an occasional sentence and/or paragraph (referenced) followed by your own critical analysis/evaluation. You will receive no marks for work that is not your own. Your work may be subject to checks for originality which can include use of an electronic plagiarism detection service.
Where you are asked to submit an individual piece of work, the work must be entirely your own. The safety of your assessments is your responsibility. You must not permit another student access to your work.
Where referencing is required, unless otherwise stated, the Harvard referencing system must be used (see your Programme Guide).
Submission Date and Time      Before 4pm, Friday 1st September 2006
Submission Location      LRC, Reg Vardy Centre, St Peters Campus
Java Network Programming (COMM3C)
Assignment 1 (Referred/Deferred) May 2006
Snooker Scoreboard Application
This assignment is designed to consolidate the knowledge of the Java programming language you have gained in the first half of the course and to develop your skills in using basic Java input/output facilities, designing graphical user interfaces and implementing client-server systems.
The Application (70 marks)
You will develop a client/server based scoreboard application which will present and log the activity of a snooker match which may comprise a maximum of 15 frames. Your application must be capable of performing the following functions:
(a) Displaying the current score of each player for the current frame.
(b) Displaying the break for the player currently at the table.
(c) Displaying a record of the sequence of balls potted with their values during each break for each player during the current frame.
(d) Logging, and ultimately storing on a floppy disc in drive A, a record of the sequence of events occurring during a frame. This would include: fouls committed, balls potted with their values and which player potted them for each frame completed. This is intended to provide the definitive record for the frame. Note that, with the exception of player names, match identification and the date, no other information (such as the frame score) should be stored on disc.
(e) Recalling a frame's record from disc. The application must be able to process the data recalled from disc for any chosen frame and provide the following information:
i) the frame score and the highest break for each player,
ii) the number of points conceded as fouls by each player,
iii) the number of times each player visited the table,
vi) the number of times each colour ball (not reds or free balls) was
v) potted in the frame as a whole by each player.
The application must be developed as a client/server system using the loopback address so the client and the server can be run on the same computer.
The client will include the graphical User Interface (GUI) which will facilitate the entry of player names, a method of scoring, a method of displaying all required information and interaction with the server to allow data to be sent to it and recalled from it. See above for detailed requirements.
The server must facilitate the storage to and retrieval from floppy disc of match data and interaction with the client. The server need only be capable of interacting with a single client.
The Application (continued)
In addition to your report (see next page), you must submit a 3.5 inch virus checked floppy disc (CD's are NOT acceptable) which must contain four folders, described below, and nothing else.
Folder 1: The clientSource folder. Must contain all client source files and nothing else.
Folder 2: The clientClass folder. Must contain all client class files and nothing else.
Folder 3: The serverSource folder. Must contain all server source files and nothing else.
Folder 4: The serverClass folder. Must contain all server class files and nothing else.
Any number of client classes may be developed, but the class containing the client's main method must be called client. Any number of server classes may be developed, but the class containing the server's main method must be called server.
All applications must be executable directly from the command prompt window, without the use of an additional Integrated Development Environment such as Eclipse or JBuilder. You must clearly identify which version of Java you have used to develop your application.
Note that it will not be possible for you to include class files corresponding to source files which do not compile correctly. You must, however, include all of your source files in the appropriate folder regardless of whether or not they compile.
You should place the floppy disc in a small envelope and tape it to the front sheet of your report so that no text on the front sheet is obscured. Do not apply tape to the disc itself.
Report Submission Details (30 marks)
Your report must contain the following elements:
(a) a well commented source listing of the application source code (whether functional
or not). Note that sections of code which do not function correctly should be clearly identified by the words "NOT FULLY FUNCTIONAL" and accompanied by a brief hand written explanation of the problem.
(b) a maximum of four screen shots showing the application in action
(c) a conclusion, with clearly marked sub-headings, which must include:
i) a clear statement of the extent of the application's functionality,
ii) a brief explanation of how to use your version of the application,
iii) a description of how you have made the application robust,
iv) any other commentary that you feel is relevant.
Your report must be presented on A4 sheets of paper which must be stapled together at the top left corner to allow access to all of the report�s contents without removing the staple.
If your report is too thick to be secured using a staple, punch a hole in the top left corner and bind the pages together with a treasury tag.
Your report must not be submitted in any type of cover or folder.
Your name, my name and the module number must be clearly displayed on the front sheet of your submission.
No other information, designs or motifs should appear on the front sheet.
Note that all the pages of this assignment must be submitted with your report and must immediately follow the front sheet.
Your report must NOT be submitted electronically and must NOT be included on your floppy disc.
Failure to comply with the requested report and floppy disc submission format will result in the allocation of a significantly reduced mark.
A.Wadsworth
2)UNIVERSITY OF SUNDERLAND
SCHOOL OF COMPUTING AND TECHNOLOGY
MODULE CODE:      COMM3C
MODULE TITLE:      Java Network Programming
MODULE ASSESSOR:      John Tindle
ASSIGNMENT      Two of Two (Referred/Deferred)
TITLE OF ASSIGNMENT:      Java Media Player
MODERATED:      May 2006
PLEASE READ ALL INSTRUCTIONS AND INFORMATION CAREFULLY.
This assignment contributes 50% to your final module mark.
Please ensure that you retain a duplicate of your assignment. We are required to send samples of student work to the external examiners for moderation purposes. It will also safeguard in the unlikely event of your work going astray.
THE FOLLOWING LEARNING OUTCOMES WILL BE ASSESSED:
Knowledge of:
a.      Critical awareness of the issues and problems associated with the development of programs to run in a networked environment      �9
b.      Critical understanding of the Java and the web      �9
c.      Architectural issues of relating to distributed systems
d.      Critical awareness of network programs and network protocols      �9
and ability to:
e.      Design and implement a Java applet or application      �9
f.      Critically evaluate network technologies for specific requirements      �9
g.      Design test a Java based on-line systems      �9
h.      Work as part of a team to develop a component based system.
i.      Use and critically evaluate Software Engineering tools      �9
IMPORTANT INFORMATION
You are required to submit your work within the bounds of the University Infringement of Assessment Regulations (see your Programme Guide). Plagiarism, paraphrasing and downloading large amounts of information from external sources, will not be tolerated and will be dealt with severely. Although you should make full use of any source material, which would normally be an occasional sentence and/or paragraph (referenced) followed by your own critical analysis/evaluation. You will receive no marks for work that is not your own.
Where you are asked to submit an individual piece of work, the work must be entirely your own. The safety of your assessments is your responsibility. You must not permit another student access to your work.
Where referencing is required, unless otherwise stated, the Harvard referencing system must be used (see your Programme Guide).
Submission Date and Time      Before 4pm, Friday 1st September 2006
Submission Location      LRC, Reg Vardy Centre, St Peters Campus
Module COMM3C Java Network Programming
Assignment 2 (Referred/Deferred) May 2006
Java Media Framework
Part 1 Research Topics
The Java Media Framework API (JMF) enables audio, video and other time-based media to be added to applications and applets built on Java technology. This optional package, which can capture, playback, stream, and transcode multiple media formats, extends the Java 2 Platform, Standard Edition (J2SE) for multimedia developers by providing a powerful toolkit to develop scalable, cross-platform technology.
The aim of this assignment is to develop the skills required by a network systems developer so that they are able to incorporate standard Java components code into their own projects.
Here is a link the JMF website
http://java.sun.com/products/java-media/jmf/
JMF documentation
http://java.sun.com/products/java-media/jmf/reference/docs/index.html
JMF code examples
http://java.sun.com/products/java-media/jmf/reference/codesamples/index.html
JMF Documentation
http://java.sun.com/products/java-media/jmf/2.1.1/specdownload.html
Download and read the JMF API Guide
https://sdlc3a.sun.com/ECom/EComActionServlet;jsessionid=1BA18CD12B4C0D0DEC445DAAD5522248
Research the topics given in Part 1 and answer the questions listed below.
Describe the structure and mode of operation of the JMF in your own words.
Describe in your answer Controller Event (ref p30 JMF API Guide)
Describe in your answer Standard Controls (ref p20 JMF API Guide)
Describe in your answer Presenting RTP Media Streams (ref p68 JMF API Guide)
Describe in your answer Capturing Time Based Media (ref p77 JMF API Guide)
Describe what is meant by a Media Processor and a Media Player. How do they differ?
Part 2 SimplePlayerApplet.java
Download the Java Applet, modify the source code and add it to a package within a Java Project. Recompile the Applet using JBuilder. Please refer to the following two links:
Code examples
http://java.sun.com/products/java-media/jmf/reference/codesamples/index.html
SimplePlayerApplet.java
http://java.sun.com/products/java-media/jmf/2.1.1/samples/samples/SimplePlayerApplet.java
Download the JMF library and add it to the JBuilder IDE using the Project Properties function.
Download the JMF library using this link
http://java.sun.com/products/java-media/jmf/2.1.1/download.html
Describe how you developed the applet SimplePlayerApplet.java
Describe how you tested SimplePlayerApplet.java.
Use the JB Builder/Designer tool to add two buttons to a Frame to start and stop the AppletPlayer.
Upload the Applet online to your CET website.
Set the access rights so that the Applet will run online via browser.
Test the Applet using a browser.
Provide screenshots to prove the Applet runs satisfactorily online.
Here is a link to view the operation of the JMF Player
http://osiris.sunderland.ac.uk/~cs0jti/NetSys/website/data-archive/COMM3C-JavaNP/JavaMediaFramework/SimplePlayerApplet/classes/
To run the Applet click on SimplePlayerApplet.html
To run this applet in your browser you must install the Java Runtime Environment and the JMF.
http://java.sun.com/j2se/1.4.2/download.html
To run the Applet it is also recommended that a codec pack is installed.
Here is a link to freecodecs.com
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
The following codec packs have been found to work satisfactorily with the JMG Applet.
Install either the (i) K-Lite Code Pack or the (ii) XP Codec Pack
Note - Do not install both codec packs at the same time.
Video clips may be found at this URL
http://osiris.sunderland.ac.uk/~cs0jti/NetSys/website/data-archive/COMM3C-JavaNP/JavaMediaFramework/
Tests have shown that the following files are compatible with the JMF Player,
1 - eng.avi
2 - movie.mpeg
3 - hvid.avi
Note
If any of the links given above are broken then students may find copies of this data stored at the following URL.
http://cet-netres-srv.sunderland.ac.uk/website/Archive2006/JMF/SimpleAppletPlayer/
Student Report Structure
     1. Write and submit an original report relating to the design of your Java application.
     2. Provide a printed report. Your mark will primarily be obtained from your printed report.
     3. The contents of the report must be completely original, this includes text, diagrams and any simple examples.
     4. Students are required to submit a disk with their JBuilder Java Projects.
     5. Students must put their disk in an envelope and attach it their report.
     6. If the disk is directly sellotaped to the report their project code will be allocated a mark of 0.
     7. The report submitted must not exceed the page count excluding the front sheet and index.
     8. Students should print on just one side of the paper.
     9. Staple your report at the top left hand corner.
     10. Do not use plastic folders or envelopes that must be taken apart and reassembled.
     11. Required font type Arial or Times Roman and size 12.
     12. To obtain high marks students must present work that has a high technical content with clear diagrams and a good standard of original English (your own work), that is not taken from standard textbooks, papers or websites.
     13. Students should provide good references and link them with the text and diagrams in the main body of their report. All text that is extracted and added from another source, such as the web, must be identified using bold italics. The total amount of text added that is not original must not exceed 5% of the total.
     14. Penalties will be incurred for the following
No name on disk
No name on report
Disk Sellotaped to report
Report in a plastic folder
JB project is incomplete or will not compile.
Moderated by MSc Moderation Panel May 2006
Reference: jmf-2006-v4-modified.htm
A copy of this assignment may be found online at URL
http://osiris.sunderland.ac.uk/~cs0jti
Name
Frontpage 1 side of A4 Index 1 side of A4
Part 1 Research into JMF 4 sides of A4 Marks 30
Controller Event
Standard Controls
Presenting RTP Media Streams
Capturing Time Based Media
Player vs processor
JMF Plug-ins
Part 2 SimplePlayerApplet.java 3 sides of A4 Marks 60
Link for application
Description of development
Start and Stop buttons
Description of testing
Online test � applet works
Screenshots
JB project loads
JB code runs - 20 marks
References 1 side of A4 Marks 10
List of references
Correct use of refs in main text
2)

Plagiarism, paraphrasing and downloading largeamounts of >information from external sources, will
not be tolerated and will be >dealt with severely.
You will receive no marks for work that is not yourown. Your work may >be subject to checks for
originality which can include use of an >electronic
plagiarism detection service.Hey, the OP didn't read the rest of the assignment so why should they read that part?

Unable to boot - flashing finder icon with question mark.

Hi all,
I just got a friends old xserv G5 to learn Mac and the server suite on. He gave me the OSX Server install disk (10.5 I believe) with the license keys.
I get the XServe into "Target Disk Mode" by turning it on holding T and plugging my friends Intel Pro MacBook into it VIA FireWire. We install the Server 10.5 to the Server Disk fine, no issues. All options checked. Then upon reboot we shutdown everything and try to boot the server up on it's own and then this is where we get the flashing finder icon problem...
Here's what we've tried:
I think the Firmware is locked because when I try to power on holding power + system identifier button, both rows flash instead of the one, here's what I've done
Tried removing a memory module, booting with command, alt, p + r, no effect.
Clear NVRM by pressing button behind PSU on mainboard of xserve. No effect.
Unplugging and removing battery for minute, to clear. No effect.
I guess what I'm trying to do is clear the firmware lock so I can direct the xserve to select the startup disk by pressing F1 / D as I'm assuming that's what the issue is?
Any thoughts?

I'm not sure about the dl-DVD thing. I'm trying to remember how I installed 10.5 on my G5 boxes (it's been a while) and I know I used the Administrator computer as described in the Getting Started guide, but I don't remember if I imaged the DVD to a firewire drive.
The easiest short-cut for that is to image the DVD onto a firewire drive and attach that to the Xserve and run it as the install media. It's much faster to install this way as well. Use Disk Utility to image the DVD onto an external firewire and then boot holding down the option key - choose the drive and then use the notebook as an "Administrator computer" as described in the guide. The only hold-ups are the IP space issues and make sure you know the Xserve serial number. In theory I think you can also use another computer with the DVD in the drive running in firewire mode but now you're up to three computers instead of 2 plus a firewire drive.
I've never been a fan of the notebook>>Xserve install process even before architecture issues arose. The Xserve has special hardware monitoring capabilities that you would lose when installing booted from a non-Xserve box. I know 10.5 was supposed to install a "global" image that would run on both platforms but I wouldn't trust it even if they said you could.
HTH,
=Tod

Architectural issue

Similar Messages

Maybe you are looking for