Topology - Physical Architecture issues

Hi,
I am trying to reverse engineer and add tables from SQL server and getting the following error.
ODI-17549: Source data type "int identity" for thetechnology "1017" does not exist
Please help. Thanks for your time.

ODI does not package all data types for all technology. eg: MSSQL demo database contain many user-defined datatype
when you use rkm mssql:
1)for double type, there is a bug found, length field is reversed wrong, you can manually modify the rkm
2)when reverse foreign key, parent catalog field does not filled
even using rkm, you still face datatype not found possibility
1)you can manually add datatype in topology navigator
2)reverse data type on an existing data server, this method will reverse many data type automatically, but it also import noises, suggest you duplicate the technology, then try on the duplicated one at first

Similar Messages

Dynamic physical architecture

Hello All,
I wonder if it is possible to have a physical architecture be dynamic....
I have a comprehensive ODI framework, which calls upon certain flat files and (mostly) reads/writes from/to these using a variety of interfaces. The names (and location (directories)) of the flat files are stored as variables (extracted from a table.) The information about file locations is, therefore found in two locations: 1) in the variables and 2) in the physical architecture.
I would like to have the location information stored in the variables only and assigned dynamically to the physical architecture, so that I can have applications and users change the location.
Is this possible? In other words, can the physical architecture pointer for a flat file be represented as a variable (#<PROJNAME>.<Directory>)? If so, when is the pointer resolved and what, if any, are the constraints?
Alternatively, can the physical architecture pointers be left blank, and can the entire file resolution be done in a variable (in the interface)? In other words, can the issue of physical architecture be postponed to a point where it is resolved by the interface execution.
Here is an example....
I want to access a file, X.JNK, stored in the directory C:\MYDIR on the host A.
Today the physical architecture points to C:\MYDIR, and the interface code identifies X.JNK (as a variable <PROJNAME>.<FILENAME>, e.g. #MYPROJ.JUNKFILE = X.JNK).
The directory is also stored in a variable (as <PROJNAME><DIRECTORY>, e.g. #MYPROJ.JUNKDIRECTORY = C:\MYDIR), and so the fully qualified "address" for the file is:
#<PROJENAME><DIRECTORY>\#<PROJNAME><DIRECTORY> =
#MYPROJ.JUNKDIRECTORY\#MYPROJ.JUNKDIRECTORY =
C:\MYDIR\X.JNK
Given that setup, can the physical architecture be left blank (except for host information) and the interface be executed with #MYPROJ.JUNKDIRECTORY\#MYPROJ.JUNKDIRECTORY?
Best,
pajacobsen

Dev,
Yes, it works, although, for reasons unknown, I had to completely redo all interfaces that drew upon the affected models (I attempted a variety of other changes (modifying, for instance, the alias), but, ultimately, nothing worked until I rebuilt all the interfaces.
So, in sum, this issue is closed with the proviso that it is necessary to redo the interfaces.
Best,
pajacobsen
P.S. I often end up having to redo interfaces (rather than edit them) once I introduce changes to the models. Although the interfaces, on the surface, looks fine after the modification of the model, they don't work (I suspect a pointer problem.) I guess there are limits to ODI's flexible nature.
Edited by: user11102735 on Nov 23, 2010 1:59 PM

Query on Physical Architecture,Logical Architecture and Model

Hi Experts,
I have a confusion regarding Physical Architecture,Logical Architecture and Model.Please tell me what type of information or data these above three hold.
Thanks

Physical architecture contains information on the physical setup of your environment i.e. server names, jdbc connection strings, usernames, Passwords etc.
The logical architecture provides a layer of abstraction that allows you to group via contexts similar Physical architecture components which reside in different locations/environments.
Models are the reversed representations of the objects in your physical architecture i.e. tables, flat files etc. Models are used as sources and targets in your interface design

Sample Oracle EBS R12 physical/architecture layout diagram

Hello!
Anyone can share sample Oracle EBS R12 Physical/architecture layout diagram?
Primarily I am looking for a sample diagram that shows mid-tier..concurrent managers/reporting nodes/load partitioning and database nodes

user10229350 wrote:
First you stop responding with unnecessary links which are of no help.
Hussein's comment in this thread was spot-on correct.
Multi-posting is poor forum etiquette at best and outright rudeness that exhibits arrogance at worst.
Your other thread has an appropriate response that directs you to the product's documentation.
That documentation exists to guide you how to use the product as designed.
This thread is locked.

Hyperion Planning - Physical Architecture

Hi Experts,
I'm checking through the connections in the physical architecture of ODI for ERPi. When I test the connection to Planning I get the following error:
Connection failed
java.lang.Exception
I have checked the ODI agent is working and the server reference and port are correct.
I'm hoping someone will be able to show me the light!? Also, would this impact drillthrough?
Thanks in advance.
Mark

Mark,
ODI has no bearing on DrillBack. All ODI is used for is to retrieve information out of Oracle EBS and provide it to ERPi. ERPi then at that point will load the data into the desired target; based on the target application settings.
For the error; it seems that either something is not valid .... or is not able to be 'tested'. Please follow the documentation noted in KM: Configure and use ERPi to load data into Financial Data Quality Management from EBS [ID 951369.1]
Thank you,

Best (Thrifty) physical architecture for medium-size environment?

What is the absolute best physical architecture you would come up with for this medium size environment?

Thrifty? The SharePoint CALs alone will run you at least $1.5 million unless you already own these or have a good EA. You said "basic collaboration" so I'm assuming you don't also need Enterprise CALs though note some of the features you listed
could require enterprise licensing depending on how you're using them.
The information you haven't provided isn't enough to make an appropriate recommendation. While you have 10,000 users it's not clear how many concurrent users you expect, or what sort of workloads these users will have.
Are the users all in one location? Spread out geographically? What types of network connections? Why types of networking devices (such as a load balancer for your second option)
Is this virtual or physical? What are the hardware specs of the servers?
How many documents do you expect to have? How large will they be? What sort of storage is backing this farm? How many site collections, sites, lists, libraries, items do you expect? Workflows, third party solutions, customizations, etc. The list goes on.
Neither of these options provide high availability. Is this a concern for you? I ask because in my experience a SharePoint farm used by over 10,000 people needs to be highly available. If you need HA then you'll need more servers.
Honestly this forum isn't the best place to get the information you're looking for (i.e. an architectural design). Instead I recommend asking specific questions about specific problems you have with your design.
My question(s) then for you are: 1. Why are these the two designs you have? (in another way: What are the decisions and requirements you have that led you to these options) and 2. What is the challenge you're having in picking one of them?
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Physical architecture of SSAS

Hi experts,
can anyone please help me the physical architecture of SSAS. It will be very helpful for me to improve my skill.
Thanks

Hi,
You can start here:
Analysis Services Multidimensional Data - Physical Architecture:
http://msdn.microsoft.com/en-us/library/bb522614.aspx
SSAS Data Mining Physical Architecture: http://msdn.microsoft.com/en-us/library/bb510502.aspx
Regards,
Zoli

Physical query issued by Obiee when cache is on is different and slow

When the same report runs in OBIEE 10g and cache is OFF it takes less then 1min to get results. If cache is turned ON physical query issued by Obiee is totally different and it takes 2h to get results. Has anyone experienced this with having cache on that some queries are performing poorly.
Thanks,
Tatjana

We are using BI Apps Order Management and Fulfillment Analytics and all tables are cached anyway. Dimensions used are not that huge up to 40K rows. What should I check when it comes to DB query? As I said is different than one generated when cache is disabled although both have the almost the explain plan.

Microsoft Excel Physical Architecture not possible to create.

Hello:
I´m using ODI 11.1.1.5 and I have problems to load a simple Excel file.
Following instructions of different blogs, I don't have in ODI the Microsoft Excel "Technology" under the "Physical Architecture Section" under "Technologies" folder.
I only have a "File" folder inside "Technology" folder.
When I try to create a new technology, I get a message saying: "Unable to save Microsoft Excel (ODI-17591: Name 'MICROSOFT_EXCEL' is already used)"
Can anyone help me with this?

Are you trying to create a dataserver under Excel or actually create a new technology?
I think you want to right click excel and add a dataserver, try a different name - It might be getting confused with the code derived from the name you are currently providing.

Heatsink, logic board and physical architecture

Want to ask anyone who knows the macbook physical architecture:
How's the heatsink related to logic board? Is it etched to the logic board or are they seperated? Does a replacement of logic board also replace the heatsink?
Thank you!

So according to what you say, my RSD problem is still not solved.
That's jumping to conclusions.
There are many possible reasons why a computer might suddenly shut down.
With the first version of the MacBook many people reported the following:
a) The computer would shut down many times, seemingly at random.
b) After waiting a while they were able to turn the computer back on again.
c) Either replacing the heat sink assembly or installing the SMC firmware update fixed the problem.
But I see from one of your other posts that in your case:
a) You had only one shut down.
b) Your MacBook would not start up at all afterwards.
c) The shut down occurred after you'd installed the SMC firmware update.
This suggests that in the case of your MacBook the shutdown had a different cause and would therefore require a different remedy.
I recommend you just use your MacBook normally. After a while you will be able to judge whether the shop has correctly diagnosed and fixed the problem.

LMS 4.2 Topology Data Collection Issue

Hi there,
i have an issue with the lms 4.2 Topology Data Collection. After installation the Topology Data Collection was running normaly, but since first server reload the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary is "frozen". It only shows the following content from first run:
Topology Data Collection    193    0    Not Available     Running    Schedule
Is there any option to stop this process elsewhere? I cannot find anything under jobs in running state or so. Clicking on Schedule only give me the option to start data collection, but lms always returns that the process is running.
Thanks for help.

Hi,
i have reseted the ANI db using NMSROOT\bin\perl.exe NMSROOT\bin\dbRestoreOrig.pl dsn=ani dmprefix=ANI
Everything is set to 0:
Topology Data Collection      0 0 Not Available                          Running Schedule
UT Major Acquisition            0 (0 End hosts 0 IP Phones) 0      Not Available Idle Schedule
VRF Collection                    0 0                                              Not Available Idle Schedule
But Topology Data Collection is still frozen to "Running" state....

What will be physical architecture for SSAS Tabular model with Sharepoint 2013?

I would like to build SharePoint 2013 based reporting portal with Power View as visualization tool.
I have 300-800 million rows and customer puts priorities in high performance.
Data source is SQL Server database and Flat Files.
What will be recommended physical archicture? Is following good?
-SQL Server database server
-SSAS Tabular application server
-SharePoint 2013 Front-End (multiple if needed)
Kenny_I

Hi Kenny_I,
According to your description, you want to if it's OK to SQL Server database server, SSAS tabular application server and SharePoint 2013 Front-End on different server, right?
As I said in another thread, even though we can install all of them on same physical server, however in the production environment, the recommendation is that install them on different server, it will beneficial to troubleshooting the issue when some
issue occur on the environment. So in your scenario, it Ok to install all the application on different server. Here are some links about requirement to install the application.
System requirements for Power View
Hardware
Sizing a Tabular Solution (SQL Server Analysis Services)
If I have anything misunderstood, please point it out.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Architectural issue

We are providing an architecture for 9i Application server based applications to one of our clients. Our client is already licensed with the Oracle 9i AS on IBM AIX based systems. As our future plan grows we might implement applications with Oracle Collaboration Suite and Oracle Developer suite. Now I have some basic doubts here:-
1.Suppose we are installing the 9iAS on IBM AIX based system and can we have our 9i database on Solaris SPARC or LINUX x86 system ?
2. Now I understand the fact that Oracle developer suite is not supported for IBM AIX based systems. In this case can I purchase Developer suite for NT or Solaris and then develop components using this and deploy the same on 9iAS on IBM AIX system and the database on the NT/solaris server.
3. What about the collaboration suit, should this also be for IBM AIX system to talk with 9iAS on AIX server and 9i database on Solaris.
Please help me with the above issues so that I can start with my arcitectural suggestions.

One more help, please correct me if I am wrong:-
With developer suite 9.0.3 we will only be able to use Forms, Reports and JDeveloper.
With developer suite 10g only we will be able to use Clickstream intelligence builder, Warehouse builder, SCM, Discoverer and Designer.
One more doubt i have is aren't the Clickstream intelligence and Discoverer getting installed along with 9iAS? Then could you please elaborate how I am benefitted more with the Developer suite with respect to these tools.
Thanks

MPLS L3 and L2 architecture issues

Hi,
I'm on an MPLS IP-VPN architecture and I would like to add a point to point L2-VPN (VLL ?).
Can we do L2-VPN on a cisco 2800 series ? 3800 series ?
Can I setup a lease line beetween a 3800 and a 6500 ?
I can see on my 3800 that I have the mpls L2transport commands but it doesn't seem to work on a vlan interface (which seems to be the easiest way to setup a virtual lease line as explain here: http://www.cisco.com/en/US/tech/tk436/tk428/technologies_white_paper09186a00800a3e69.shtml#wp41167)
Are there any issues to add L2-VPN on PE already use for L3-VPN ?
Best regards !

On my cisco 2800 series :
sh ver
Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4(4)T7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Tue 28-Nov-06 18:37 by kellythw
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
ROUTER_2800 uptime is 8 weeks, 6 days, 19 hours, 17 minutes
System returned to ROM by power-on
System image file is "flash:c2800nm-spservicesk9-mz.124-4.T7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 2811 (revision 53.51) with 251904K/10240K bytes of memory.
Processor board ID FCZ110473CW
6 FastEthernet interfaces
1 ATM interface
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
sh mpls l2transport doesn't exist
On my cisco 3800 series
ROUTER_3800#sh ver
Cisco IOS Software, 3800 Software (C3825-ADVENTERPRISEK9-M), Version 12.4(11)T, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Sat 18-Nov-06 23:16 by prod_rel_team
ROM: System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)
R_LPRS_3825_PE_MPLS uptime is 13 weeks, 3 days, 17 hours, 18 minutes
System returned to ROM by power-on
System image file is "flash:c3825-adventerprisek9-mz.124-11.T.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 3825 (revision 1.1) with 224256K/37888K bytes of memory.
Processor board ID FCZ1013704D
4 FastEthernet interfaces
2 Gigabit Ethernet interfaces
1 Serial(sync/async) interface
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
479K bytes of NVRAM.
62720K bytes of ATA System CompactFlash (Read/Write)
Configuration register is 0x2102
sh mpls l2transport vc 200
Local intf Local circuit Dest address VC ID Status
Tanks again

Physical keyboard issues

I have had my D2 replaced 4 times since the GB update. Not because of the software. It has been replaced due to the physical keyboard tearing, peeling, and bubbling. Certified Preowned. I am tired of having the phones replaced.

Hi xerinx!
I hate to learn of an issue with using the keyboard on your Droid 3! I have some troubleshooting steps for you. Please use the following steps:
Menu > Settings > Applications > Manage Applications > "All" tab. Then, scroll down to Multi touch keyboard and push "Force Stop" and "Clear Cache." Once these steps are completed, re-test and post back with your results. Thanks!
Christina B
VZW Support
Follow us on Twitter @VZWSupport

Topology - Physical Architecture issues

Similar Messages

Maybe you are looking for