Archive Generation

I have recently noticed that on the production database archives of size 500MB are being generated regularly despite not many users and activities being present. So to test the same I cloned the production database at found at that archives are being generated on the clone database as well at the same rate around 4-5 archives per hour same as that of the production database. Kindly advice me what needs to be done to prevent it

Bhavi Savla wrote:
SID SERIAL# USERNAME PROGRAM BLOCK_CHANGES
849 16 APPS [email protected] (TNS V1-V3) 30769103
859 8 APPS [email protected] (TNS V1-V3) 22572
728 97 APPS JDBC Thin Client 12675
879 1     [email protected] (SMON) 6680
796 10 APPS [email protected] (TNS V1-V3) 3936
821 3 APPS [email protected] (TNS V1-V3) 3878
766 11 APPS [email protected] (TNS V1-V3) 3852
778 19 APPS [email protected] (TNS V1-V3) 3810
798 8 APPS [email protected] (TNS V1-V3) 3796
760 1 APPS [email protected] (TNS V1-V3) 3795
756 11 APPS [email protected] (TNS V1-V3) 3784
802 8 APPS [email protected] (TNS V1-V3) 3759
825 21 APPS [email protected] (TNS V1-V3) 3741
761 2 APPS [email protected] (TNS V1-V3) 3734
815 3 APPS [email protected] (TNS V1-V3) 3723
790 12 APPS [email protected] (TNS V1-V3) 3723
866 24 APPS [email protected] (TNS V1-V3) 3715
786 38 APPS [email protected] (TNS V1-V3) 3713
780 5 APPS [email protected] (TNS V1-V3) 3713
818 1 APPS [email protected] (TNS V1-V3) 3707
811 3 APPS [email protected] (TNS V1-V3) 3705
832 1 APPS [email protected] (TNS V1-V3) 3702
819 8 APPS [email protected] (TNS V1-V3) 3701
835 29 APPS [email protected] (TNS V1-V3) 3700
763 1 APPS [email protected] (TNS V1-V3) 3698
799 49 APPS [email protected] (TNS V1-V3) 3695
772 3 APPS [email protected] (TNS V1-V3) 3692
768 6 APPS [email protected] (TNS V1-V3) 3688
814 3 APPS [email protected] (TNS V1-V3) 3686
773 9 APPS [email protected] (TNS V1-V3) 3684
820 3 APPS [email protected] (TNS V1-V3) 3682
834 7 APPS [email protected] (TNS V1-V3) 3680
795 4 APPS [email protected] (TNS V1-V3) 3676
789 6 APPS [email protected] (TNS V1-V3) 3675
767 5 APPS [email protected] (TNS V1-V3) 3674
759 2 APPS [email protected] (TNS V1-V3) 3674
804 44 APPS [email protected] (TNS V1-V3) 3672
812 13 APPS [email protected] (TNS V1-V3) 3671
807 1 APPS [email protected] (TNS V1-V3) 3663
850 25 APPS [email protected] (TNS V1-V3) 3658
801 27 APPS [email protected] (TNS V1-V3) 3658
830 5 APPS [email protected] (TNS V1-V3) 3658
758 18 APPS [email protected] (TNS V1-V3) 3657
817 3 APPS [email protected] (TNS V1-V3) 3655
797 22 APPS [email protected] (TNS V1-V3) 3654
788 5 APPS [email protected] (TNS V1-V3) 3649
787 4 APPS [email protected] (TNS V1-V3) 3643
784 17 APPS [email protected] (TNS V1-V3) 3641
777 3 APPS [email protected] (TNS V1-V3) 3636
785 6 APPS [email protected] (TNS V1-V3) 3633
806 30 APPS [email protected] (TNS V1-V3) 3632
764 3 APPS [email protected] (TNS V1-V3) 3632
783 1 APPS [email protected] (TNS V1-V3) 3631
781 10 APPS [email protected] (TNS V1-V3) 3623
774 1 APPS [email protected] (TNS V1-V3) 3621
810 4 APPS [email protected] (TNS V1-V3) 3620
831 3 APPS [email protected] (TNS V1-V3) 3617
813 4 APPS [email protected] (TNS V1-V3) 3612
829 8 APPS [email protected] (TNS V1-V3) 3603
816 10 APPS [email protected] (TNS V1-V3) 3602
782 14 APPS [email protected] (TNS V1-V3) 3598
851 25 APPS [email protected] (TNS V1-V3) 3583
822 1 APPS [email protected] (TNS V1-V3) 3578
826 7 APPS [email protected] (TNS V1-V3) 3571
827 2 APPS [email protected] (TNS V1-V3) 3570
805 9 APPS [email protected] (TNS V1-V3) 3567
838 19 APPS [email protected] (TNS V1-V3) 3448
823 85 APPS [email protected] (TNS V1-V3) 3407
793 7 APPS [email protected] (TNS V1-V3) 3255
775 7 APPS [email protected] (TNS V1-V3) 2845
792 18 APPS [email protected] (TNS V1-V3) 2643
721 349 APPS [email protected] (TNS V1-V3) 2527
824 18 APPS [email protected] (TNS V1-V3) 2359
776 17 APPS [email protected] (TNS V1-V3) 2207
852 14 APPS [email protected] (TNS V1-V3) 2102
779 19 APPS [email protected] (TNS V1-V3) 2102
762 16 APPS [email protected] (TNS V1-V3) 1764
738 305 APPS [email protected] (TNS V1-V3) 1473
803 19 APPS [email protected] (TNS V1-V3) 1188
765 14 APPS [email protected] (TNS V1-V3) 1063
771 11 APPS [email protected] (TNS V1-V3) 895
740 315 APPS JDBC Thin Client 780
840 4 APPS [email protected] (TNS V1-V3) 714
800 15 APPS [email protected] (TNS V1-V3) 604
809 29 APPS [email protected] (TNS V1-V3) 455
841 12 APPS [email protected] (TNS V1-V3) 389
843 17 APPS [email protected] (TNS V1-V3) 379
848 14 APPS [email protected] (TNS V1-V3) 362
845 23 APPS [email protected] (TNS V1-V3) 360
839 23 APPS [email protected] (TNS V1-V3) 338
769 22 APPS [email protected] (TNS V1-V3) 331
842 11 APPS [email protected] (TNS V1-V3) 313
770 13 APPS [email protected] (TNS V1-V3) 303
876 1     [email protected] (MMON) 299
828 2 APPS [email protected] (TNS V1-V3) 297
836 5 APPS [email protected] (TNS V1-V3) 260
844 4 APPS [email protected] (TNS V1-V3) 218
744 50 APPS JDBC Thin Client 195
726 2538 APPS [email protected] (TNS V1-V3) 159
742 5 APPS JDBC Thin Client 52
862 2     [email protected] (q001) 52
856 4 APPS     32
724 4 APPS JDBC Thin Client 27
847 40 APPS [email protected] (TNS V1-V3) 16
722 1321     [email protected] (J000) 0
885 1     [email protected] (PMON) 0
730 49 APPLSYSPUB JDBC Thin Client 0
731 6 APPS JDBC Thin Client 0
732 11 APPS JDBC Thin Client 0
733 109 APPS JDBC Thin Client 0
734 36 APPS     0
735 25 APPS JDBC Thin Client 0
736 27 APPS JDBC Thin Client 0
737 185 APPS JDBC Thin Client 0
739 4 APPLSYSPUB JDBC Thin Client 0
741 48 APPS JDBC Thin Client 0
743 7 APPS JDBC Thin Client 0
745 3 APPS JDBC Thin Client 0
746 4 APPLSYSPUB JDBC Thin Client 0
747 3 APPS JDBC Thin Client 0
748 4 APPLSYSPUB JDBC Thin Client 0
749 3 APPS JDBC Thin Client 0
750 3 APPLSYSPUB JDBC Thin Client 0
751 128 APPS JDBC Thin Client 0
752 9 APPLSYSPUB JDBC Thin Client 0
753 9 APPS JDBC Thin Client 0
754 52 APPS JDBC Thin Client 0
755 16 APPLSYSPUB JDBC Thin Client 0
757 56 APPLSYSPUB JDBC Thin Client 0
794 19 APPS JDBC Thin Client 0
833 39 APPLSYSPUB JDBC Thin Client 0
837 1050 SYS [email protected] (TNS V1-V3) 0
846 18 APPS [email protected] (TNS V1-V3) 0
853 5 APPS     0
855 12 APPS     0
857 10 APPS     0
860 1     [email protected] (q002) 0
863 9 APPLSYSPUB     0
865 412 APPS     0
867 3     [email protected] (QMNC) 0
870 1     [email protected] (ARC1) 0
871 1     [email protected] (ARC0) 0
875 1     [email protected] (MMNL) 0
877 1     [email protected] (CJQ0) 0
878 1     [email protected] (RECO) 0
880 1     [email protected] (CKPT) 0
881 1     [email protected] (LGWR) 0
882 1     [email protected] (DBW0) 0
883 1     [email protected] (MMAN) 0
884 1     [email protected] (PSP0) 0
725 1597 SYS [email protected] (TNS V1-V3) 0   This shows CRM changing blocks more often..What should i do next? So its not the blank database where no user is connected however its the APPS making the database connections and using the database. I dont know much about oracle APPS but i can think of stopping these process through concurrent manager.
So you have to figure out the necessity of these process running from APPS side.
Count the active session
select count(*) from v$session where username not in ('SYS',SYSTEM') and status='ACTIVE'

Similar Messages

Excess archive generation after migration

hi
Am facing large size of archive generation after my migration to 11.2.0.1 from 10.2.0.1 in windows 32 bit.
While I was using 10g my total archive size in a day was only 10GB. now after the migration its coming al most 50gb.
Guys.. can anybody let me know what i need to do to reduce my archive generation?
Am using the same application and queries as in 10g.

Disconnect everyone from the database.
Or learn how to read documentation and how to administer Oracle.
Or read up on the differences between 11gR2 and 10gR2.
Sybrand Bakker
Senior Oracle DBA

Archive generation is too high

HI
Archive generation is too high in my 11i instance the database is 10g every 7 minutes a 100mb(size of redo log is 100mb) archive is generated.
There are 15 seeded programs running at a schdule of 1 minutes to 2 minutes can some one give me any tips as to waht has to be done.
Regards

Hi,
Please refer to this thread.
Archive generation
Archive generation
Regards,
Hussein

Estimation of archive generation

Hi Experts,
I am planning to shrink a segment in production db to reclaim the space.The size of the table is 217 gb and on calculation it's size estimated to be max 50 gb keeping the consideration of overhead in the blocks due to PCTFREE etc..The agenda is to estimate the archive generation so that I could be ready for the space at OS to accomodate the archive generation for this shrink activity.Pls suggest me for some way to estimate archives generation before this operation so as to make it successful..Here are the details that may be required by you
DB: 10.2.0.4 Enterprise edition
OS: server 2003 (windows)
index on table: 1 unique index of size 12gb

Hi Aman/Kuljeet
I have already tested this on t&d server but since the data and the size was quite small than real so came up with this question.However I observed that aprox 4 times the archives was generated than the space reclaimed..Now using this observation it comes to 600 gb in production aprox which was a concern for keeping our dataguard in sync..Anyways thanks a lot for your response.
Regards
Asif Khan

Excessive archive generation

DB: 817
OS : Sun 5.3
Suddenly my db started generating too many archive logs, normally it used to generate dozens of archive logs in a day, now a day's it's started generating in 2 to 3 minutes, Nothing has been change in the database side and at application side. What could be the obviosu reason for the same?

Hi Vignesh,
Thanks for the reply, I have checked, there is no background job or process is running.... Still rate of archive generation is very high.

Oracle 9i Streams - Lots of Archive generation.

Hi,
We are using Oracle 9i stream for data replication between two database servers running in ARCHIVELOG mode.
We observed during data replication , with very few transactions, lots of redo, and hence the archived logs are getting generated, which is almost 2.5G per dae. What might be the reason for generation of lots of REDO ? This redo generation is almost 20 times more than the normal redo generation when replication process (capture, propagation and apply process) was not running. Stream replication do generate redo in multiple of normal redo, but not as big as we are getting. What might be the reason for the same.
Kamlesh C

Hello,
You can query the v$sesstat and v$session view so as to find the session which generates
the most redo. For instance:
select a.sid, a.serial#, a.username, a.program, b.value "Redo blocks written"
from v$session a, v$sesstat b
where a.sid=b.sid
and b.statistic# = (select statistic# from v$statname
where name = 'redo size')
order by b.value;The query should be executed when the database is generating the Archived logs.
Hope this help.
Best regards,
Jean-Valentin

How to check archive generation?

Hi,
lot of archives generating in my db.
how can i know which session is generating more archives? is there any sql for it?
please suggest me how to face these kind of issue?

Hi,
To find sessions generating lots of redo, you can use either of the following methods. Both methods examine the amount of undo generated. When a transaction generates undo, it will automatically generate redo as well.
The methods are:
1) Query V$SESS_IO. This view contains the column BLOCK_CHANGES which indicates how much blocks have been changed by the session. High values indicate a session generating lots of redo.
The query you can use is:
       SQL> SELECT s.sid, s.serial#, s.username, s.program,
         2 i.block_changes
         3 FROM v$session s, v$sess_io i
         4 WHERE s.sid = i.sid
         5 ORDER BY 5 desc, 1, 2, 3, 4;Run the query multiple times and examine the delta between each occurrence of BLOCK_CHANGES. Large deltas indicate high redo generation by the session.
2) Query V$TRANSACTION. These view contains information about the amount of undo blocks and undo records accessed by the transaction (as found in the USED_UBLK and USED_UREC columns).
The query you can use is:
      SQL> SELECT s.sid, s.serial#, s.username, s.program,
        2 t.used_ublk, t.used_urec
        3 FROM v$session s, v$transaction t
        4 WHERE s.taddr = t.addr
        5 ORDER BY 5 desc, 6 desc, 1, 2, 3, 4;Run the query multiple times and examine the delta between each occurrence of USED_UBLK and USED_UREC. Large deltas indicate high redo generation by the session.
You use the first query when you need to check for programs generating lots of redo when these programs activate more than one transaction. The latter query can be used to find out which particular transactions are generating redo
Regards,
Francisco Munoz Alvarez
www.oraclenz.com

Archive Generation in RAC environment.

Gems,
I have one doubt it was not able to solve from my mind i.e.
As per my knowledge,
1) Every instance has its own thread so Thread is instance specific. My questions are, How the SCN will be maintained in ARCHIVES? will thread 1 & thread2 contains the same SCN?
2) If i have primary database with two nodes, and standby as single stand alone, How it will apply the archives on standby? I monitored ALERT log file of standby, Mostly it applies first thread 1 sequence, then thread2 sequence then thread1 sequence and then thread 2 sequence and so on.. Let me know if my assumption is wrong.
3) If i cloned from RAC to NON-RAC then, If in case if i performed SCN based recovery as
run
set until scn 10000;
restore database;
recover database;
then scn *10000* will contain in both the archives or only in one archives? or it contains only in one sequence? Please explain me.
Appriciated for the right answers, If you are unable to understand let me know, I will try to clear up more clearly.
Thanks

Hi,
first of all there are 2 kinds of SCNs. A "global" SCN and a local SCN per instance. Since 10g the SCNs are advanced with a mechanism called BoC (Broadcast on Commit).
Each time the LGWR writes to the redo log, LGWR sends a message to update the global SCN in all instances and to update the local SCN in all active instances.
1.) So each RedoLog entry knows the global SCN. So even though you have multiple instances, the SCN is unique (and in order).
2.) That depends on how the redlogs were written. If e.g. one instance did not write redologs for a while, it could be that 2 logs from instance 1 are needed before the log from instance 2 is needed. But in gerenall it will be "parts of redolog 1 then parts of redolog 2" etc.
3.) Yes you can, since the (global) SCNs are unique and will be used.
Regards
Sebastian

DC archive generation - deploy without JDI

Hi everybody
I have Web Dynpro DC "parent" depending on WebDynpro DC "child", and no JDI in use.
I would like to create a deployable archive for father and then one for child and then ask customer's sysadmins to deploy them (e.g. with SDM), as I cannot directly do that.
I can see that right clicking on the LocalDevelopment~<project name> project folder from WD perspective - WD explorer, I can create an archive.
Where is it stored? Can I use it for the specified purpose?
Thanks
Points will be awarded
Vincenzo

Hi Vincenzo,
All the DC's will be stored in the file system.
The path for the DC's you can find using Window ->Preferences ->Java Development Infrastructure -> Development Configuration Pool -> Root Folder. You can find the DC's path here.
Go to the above path, you can find "LocalDevelopment" folder where all the local DC's will be stored. Under "LocalDevelopment" folder -> DCs -> "vendor name" (Ex: sap.com) -> project name -> _comp -> gen -> default -> deploy, you can find the ear file.
You can use the same file to deploy using SDM.
Hope this helps!
Regards,
VJR.

Archive generation growth.

Hi All,
DB-10.2.0.2
Is there any way, we can know, which SQL/Transaction causing the maximum REDO to generate? Also, HOW much redo in terms of MB Oracle generating every seconds.
hare krishna

You can see how many archives you have generated recently by running: select * from v$log_history order by first_time desc

Archive generation history in 10g

Hi,
I want to find out how much archive generated one month back, i am able to get archive history report only 10days, i am not able to get more than 10 days, please share me if you guys have any script or MOS to find out script
DB: 10g R2
OS: Linux.
Thanks

Yes, but i am not getting old archvie information.
SQL> SELECT A.*,Round(A.Count#*B.AVG#/1024/1024) Daily_Avg_Mb FROM
2 ( SELECT To_Char(First_Time,'YYYY-MM-DD') DAY, Count(1) Count#, Min(RECID) Min#, Max(RECID) Max# FROM v$log_history
GROUP BY To_Char(First_Time,'YYYY-MM-DD') ORDER BY 1 DESC ) A,
3 4 ( SELECT Avg(BYTES) AVG#, Count(1) Count#, Max(BYTES) Max_Bytes, Min(BYTES) Min_Bytes FROM v$log ) B;
DAY COUNT# MIN# MAX# DAILY_AVG_MB
2011-08-10 1 62071 62071 100
2011-08-09 163 61908 62070 16300
2011-08-08 565 61343 61907 56500
2011-08-07 776 60567 61342 77600
2011-08-06 73 60494 60566 7300
2011-08-05 149 60345 60493 14900
2011-08-04 162 60183 60344 16200
2011-08-03 182 60001 60182 18200
2011-08-02 148 59853 60000 14800
2011-08-01 183 59670 59852 18300
10 rows selected.
SQL> select
to_char(first_time,'DD-MM-YY HH24:MM') day, COUNT(*) as total
from v$log_history where to_char(first_time,'DD-MM-YY HH24:MM') between '07-08-11 06:00' and '08-08-11 09:00'
group by to_char(first_time,'DD-MM-YY HH24:MM')
order by day 2 3 4 5 ;
DAY TOTAL
07-08-11 06:08 43
07-08-11 07:08 37
07-08-11 08:08 37
07-08-11 09:08 37
07-08-11 10:08 37
07-08-11 11:08 37
07-08-11 12:08 37
07-08-11 13:08 36
07-08-11 14:08 38
07-08-11 15:08 38
07-08-11 16:08 37
DAY TOTAL
07-08-11 17:08 37
07-08-11 18:08 37
07-08-11 19:08 37
07-08-11 20:08 37
07-08-11 21:08 32
07-08-11 22:08 31
07-08-11 23:08 30
08-08-11 00:08 36
08-08-11 01:08 33
08-08-11 02:08 38
08-08-11 03:08 37
DAY TOTAL
08-08-11 04:08 38
08-08-11 05:08 39
08-08-11 06:08 44
08-08-11 07:08 54
08-08-11 08:08 40

Find archive generation over last one month

Hi ,
How can I find the archives count per each day generated over last 1 month.I am unable to get the exact value from v$archived_log;
Regards,
Hussain

Hey Asif,
Thanks very much ,it works
SQL> l
1* select count(*),FIRST_TIME from v$archived_log group by FIRST_TIME
SQL> select trunc(completion_time),count(sequence#)
from V$archived_log
where to_char(trunc(completion_time),'mm/yyyy') like to_char(sysdate,'mm/yyyy')
group by trunc(completion_time)
order by trunc(completion_time);
2 3 4 5
TRUNC(COMPL COUNT(SEQUENCE#)
03-dec-2009 126
04-dec-2009 378
05-dec-2009 460
06-dec-2009 314
07-dec-2009 158
08-dec-2009 378
09-dec-2009 193
10-dec-2009 363
11-dec-2009 394
12-dec-2009 522
13-dec-2009 428
14-dec-2009 348
15-dec-2009 306
16-dec-2009 342
17-dec-2009 328
18-dec-2009 320
19-dec-2009 454
20-dec-2009 274
21-dec-2009 510
22-dec-2009 420
23-dec-2009 400
24-dec-2009 420
25-dec-2009 290
26-dec-2009 454
27-dec-2009 308
28-dec-2009 326
29-dec-2009 376
30-dec-2009 172
It workds fine
Cheers,
Hussain

Excess archive log generation

Hello to All,
lot of archives are generating by the production database since 15 days.Nearly 30 archives are generating per hour.Before only one or two archives are going to be genarated per hour.The size of logfile is 300m and database is having 3 log groups.Now i want to know which application or which user is generating this much of archives.How i can find the reason for this much of archive generation.
Thankx...

Can you tell us the Oracle version which you are using?
For the time, you can query v$sess_io to findout the session which is generating too much redo.
Jaffar

Lot of Archives are getting generated due to db block changes in table fnd_concurrent_requests and fnd_concurrent_queues

Hi Guys,
In our R12.1.3 EBS RAC Production Database (Size ~ 450GB), found heavy archives generation which almost 200GB - 250GB daily from past couple of months (Due to which our Standby/DR database have been lagging). After taking AWR Reports for last 3 months, I've found that fnd_concurrent_requests and fnd_concurrent_queues are 2 heavily redos transnational tables. (from db block changes section). Also the same confirmed from dba_hist_seg_stat, dba_hist_seg_stat_obj & dba_hist_snapshot tables. Purge Concurrent Request and/or Manager Data request has been scheduled with ALL, age, 14 days parameters.
We have also done re-org activity on these tables, but still no luck. is there any way to reduce archives generation on due to these FND% Tables ? is there any other request for purging ? any help would be appreciated.
Thanks in Advance,
Regards,
Manish Nashikkar

Have you checked the contents of those archived log files?
Do you purge FND_CONCURRENT% tables (and other tables) on regular basis? -- https://community.oracle.com/search.jspa?q=purging+strategy+EBS
Please see previous threads which cover the same topic -- https://community.oracle.com/search.jspa?q=too+many+archived+log+files
Thanks,
Hussein

How can i fix this error in locating loadjava server

Hi,
I have created a stateless session bean using Jdeveloper 3.2. Tried deploying on Personal 8i + WIN 2000 platform. Getting this log as shown below the mail.
Could anyone tell me why the loadjava server is not being located. Infact I can run loadjava from anywhere on dos prompt as it is in the path. What do I need to do to make it work? My client is mot able to find the bean.
Thanks,
Nagendra
LOG FILE:
*** Executing deployment profile D:\Program Files\Oracle\JDeveloper 3.2\myprojects\simpleEJB1.prf ***
*** Generating archive file D:\Program Files\Oracle\JDeveloper 3.2\myprojects\simpleEJBSource2.jar ***
Compiling the project...done
Validating the profile...done
Initializing deployment...done
Scanning project files...done
Generating classpath dependencies...done
Generating archive entries table...done
*** Archive generation completed ***
*** Deploying the EJB to 8i JVM ***
EJB deployment argument list:
"D:\Program Files\Oracle\JDeveloper 3.2\java1.2\jre\bin\javaw"
"-DPATH=D:\Program Files\Oracle\JDeveloper 3.2\bin;D:\Program Files\Oracle\JDeveloper 3.2\java1.2\bin"
-classpath
"D:\Program Files\Oracle\JDeveloper 3.2\aurora\lib\aurora_client.jar;D:\Program Files\Oracle\JDeveloper 3.2\lib\javax-ssl-1_2.jar;D:\Program Files\Oracle\JDeveloper 3.2\aurora\lib\jasper.zip;D:\Program Files\Oracle\JDeveloper 3.2\aurora\lib\vbjorb.jar;D:\Program Files\Oracle\JDeveloper 3.2\aurora\lib\vbjapp.jar;D:\Program Files\Oracle\JDeveloper 3.2\aurora\lib\vbjtools.jar;D:\Program Files\Oracle\JDeveloper 3.2\aurora\lib\vbj30ssl.jar;D:\Program Files\Oracle\JDeveloper 3.2\aurora\lib\aurora.zip;D:\Program Files\Oracle\JDeveloper 3.2\sqlj\lib\translator.zip;D:\Program Files\Oracle\JDeveloper 3.2\sqlj\lib\runtime.zip;D:\Program Files\Oracle\JDeveloper 3.2\aurora\lib\mts.jar;D:\Program Files\Oracle\JDeveloper 3.2\myclasses;D:\Program Files\Oracle\JDeveloper 3.2\lib\jdev-rt.zip;D:\Program Files\Oracle\JDeveloper 3.2\jdbc\lib\oracle8.1.7\classes12.zip;D:\Program Files\Oracle\JDeveloper 3.2\lib\javax_ejb.zip;D:\Program Files\Oracle\JDeveloper 3.2\aurora\lib\aurora_client.jar;D:\Program Files\Oracle\JDeveloper 3.2\l
b\javax-ssl-1_2.jar;D:\Program Files\Oracle\JDeveloper 3.2\aurora\lib\jasper.zip;D:\Program Files\Oracle\JDeveloper 3.2\aurora\lib\vbjorb.jar;D:\Program Files\Oracle\JDeveloper 3.2\aurora\lib\vbjapp.jar;D:\Program Files\Oracle\JDeveloper 3.2\aurora\lib\vbjtools.jar;D:\Program Files\Oracle\JDeveloper 3.2\aurora\lib\vbj30ssl.jar;D:\Program Files\Oracle\JDeveloper 3.2\aurora\lib\aurora.zip;D:\Program Files\Oracle\JDeveloper 3.2\sqlj\lib\translator.zip;D:\Program Files\Oracle\JDeveloper 3.2\sqlj\lib\runtime.zip;D:\Program Files\Oracle\JDeveloper 3.2\aurora\lib\mts.jar;D:\Program Files\Oracle\JDeveloper 3.2\lib\connectionmanager.zip;D:\Program Files\Oracle\JDeveloper 3.2\myprojects;D:\Oracle\Ora81\BIN;D:\Program Files\Oracle\JDeveloper 3.2\java1.2\jre\lib\rt.jar;D:\Program Files\Oracle\JDeveloper 3.2\lib\xmlparserv2.jar"
oracle.aurora.ejb.deployment.GenerateEjb
-u
system
-p
manager
-s
sess_iiop://localhost:2481:ORCL
-republish
-keep
-temp
TEMP
-descriptor
"D:\Program Files\Oracle\JDeveloper 3.2\myprojects\simpleEJB1.xml"
-oracledescriptor
D:\Program Files\Oracle\JDeveloper 3.2\myprojects\simpleEJB1_oracle.xml
-generated
"D:\Program Files\Oracle\JDeveloper 3.2\myprojects\simpleEJBGenerated2.jar"
"D:\Program Files\Oracle\JDeveloper 3.2\myprojects\simpleEJBSource2.jar"
Reading Deployment Descriptor...done
Verifying Deployment Descriptor...done
Gathering users...done
Generating Comm Stubs.......................................done
Compiling Stubs...done
Generating Jar File...done
Loading EJB Jar file and Comm Stubs Jar file...
Cannot locate the LoadJava server: Unknown reasons
*** Errors occurred while deploying the EJB to 8i JVM ***
*** Deployment completed ***
Could anyone tell me why the loadjava server is not being located. Infact I can run loadjava from anywhere on dos prompt as it is in path. What do I need to do to make it work. My client is mot able to find the bean.
Thanks,
Nagendra

I found a SAP note, that is exactly what I expected, and now it is solved.
SAP NOTE:
1548006 - Why isn't the new value added to a characteristic displayed in CL02/CL03?
Regards,
Moises Najar

Archive Generation

Similar Messages

Maybe you are looking for