Archivelink smartforms - Is it possible create a link if the output is XML?

Hello expert,
I created a link between smartforms and archivelink ti archive my form.
This link run ok.
Now I changed my smartform's output. I put XML output, and the link is not created .
Why, do you some idea ?
I have to change some paramteres to continue to archive ?
Tks,
Roberto.

it's not possible

Similar Messages

Creating a list from the output of Xml parsing

i extracted all the Folder name from the xml file.. (Thanks to Mr.Peter_vd_Wal..... [http://forums.sun.com/thread.jspa?threadID=5388524&tstart=0|http://forums.sun.com/thread.jspa?threadID=5388524&tstart=0] )
the xml file is
<?xml version="1.0"?>
<folders>
<folder><name>A</name><uid>C1</uid></folder>
<folder><name>B</name><uid>C2</uid></folder>
<folder><name>C</name><uid>C3</uid></folder>
<folder><name>D</name><uid>C4</uid></folder>
<folder><name>E</name><uid>C5</uid></folder>
</folders>
now i want create a list of folders form the output.
i tried....
public void endDocument() throws SAXException
    StringBuffer result = new StringBuffer();
    for (int i=0; i<nodes.size(); i++)
      Noden currentnode = (Noden)nodes.elementAt(i);
      result.append(" \"" + currentnode.getName() + "\" ,");
     midlet.alert(result.toString());
     System.out.println(result);
...........and
protected void alert(String msg)
    Display display = Display.getDisplay(this);
   String[] stringElements = {msg};
    List list = new List("Listing",List.IMPLICIT,stringElements,null);
    display.setCurrent(list);
....the output i get is
"A" , "B" , "C" , "D" , "E" ,i want a LIST of folders.... like
A
B
C
D
Ebut i get all the folders as the first option in the list.
> "A" , "B" , "C" , "D" , "E" ,

... i get all the folders as the first option in the list.
"A" , "B" , "C" , "D" , "E" ,
WYSIWYC (What You See Is What You Coded) - with code like your, above is the correct behavior.
To make a list of folders, I'd rather try something like this....
public void endDocument() throws SAXException
    String[] result = new String[nodes.size()];
    for (int i=0; i<nodes.size(); i++)
      Noden currentnode = (Noden)nodes.elementAt(i);
      result[i] = currentnode.getName();
      System.out.println(result);
midlet.createAndDisplayList(result);
System.out.println("createAndDisplayList called");
and//.....
protected void createAndDisplayList(String[] msg)
Display display = Display.getDisplay(this);
List list = new List("Listing", List.IMPLICIT, msg, null);
display.setCurrent(list);

Is it possible to create a link on the content of a text annotation??

Is it possible to create a link on the content of a annotation??? Like the content of an annotation is some notes as well as a link...
content -
this is my first annotation(notes)
http://www.google.co.in/(link)
is it possible to create a link for the url given in the content of an annotation??? On click on the url...it should get opened...
please reply its really urgent....

How/where do you want to accomplish it?
Within the document? Using Acrobat? Using another application?
Using Acrobat within the document would be possible using Acrobat JavaScript. You can access the annotation objects of your document, and you then can evaluate the properties of each of these objects. Have a closer look at the Annotation Object section in the Acrobat JavaScript documentation.
You will look for the contents property, and evaluate its content. When you have found something looking like a URL, you can create a link (using the rect property of the annotation), and you have what you want; you might then think to destroy the annotation, as it may overlay the link.
Hope this can help.
Max Wyss.

Is it possible to create a link to the bibliographies ?

is it possible to create a link to the bibliographies ?

How/where do you want to accomplish it?
Within the document? Using Acrobat? Using another application?
Using Acrobat within the document would be possible using Acrobat JavaScript. You can access the annotation objects of your document, and you then can evaluate the properties of each of these objects. Have a closer look at the Annotation Object section in the Acrobat JavaScript documentation.
You will look for the contents property, and evaluate its content. When you have found something looking like a URL, you can create a link (using the rect property of the annotation), and you have what you want; you might then think to destroy the annotation, as it may overlay the link.
Hope this can help.
Max Wyss.

Can I create multiple links to the same file without duplicating file?

does anyone know if it is possible to create multiple links to the same file using iWeb without the program automatically making multiple copies of that file in the published output? It seems that one file is created for each link.
Thanks!

Hi Franz,
have a look at the second method on this page
http://alyeska.altervista.org/en/iWeb_Downloads.html
see if you understand how it works (if you don't, please ask me)
Regards,
Cédric

Creating a Link on the Column Heading

Good afternoon,
I know with reports, you can create a link for each cell in the report attributes section. My question is it there's any way to create a link for the column header without hard coding it into the query that generating the results.
Thanks in advance,
Ivan

Ivan,
If you are using the classical reports, you have the option of creating column header using pl-sql block which will be dynamic. Thanks
Regards,
Manish

Help Please - having difficulties creating af link from the text to an attached file i acrobat

I have been reading the help, but it just wonn't work when I try.
I have tried as followed (I am working with a danish version, and hope to matched the same word as in the english version of Acrobat Xpro):
1. From the toolbox i choose content and then 'hyperlink'
2. I mark the text from which i wish to make a link
3. Acrobat respond with an popup picture 'create a link'
4. From the popup I mark 'Open a side' and push 'next'
5. Acrobat respond with a new popup picture 'create / go to a side'
6. I go to the navigator and open the list with attached file's that I have embedded in my acrobat file.
7. I mark the to which i wish to make a link to
8. In the popup 'create / go to a side' that stilll is open, i push 'Mark hyperlink'
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
How do i do it right?
Please help.

Hello Bernd
Thanks for a quick respond.
This corresponds to the text I have tried myself, but apparently I do something wrong
1.      Open a PDF that contains a PDF file attachment – done
2.      Go to where you want to create a link. If that location is in the file attachment, click the Attachments button in the navigation pane, select the file attachment, and click open.
Here I go to side number 10 from which I wish to make a link from (I am not open the attachment file at this moment, as the location not is inside the file attachment).
(I earlier also tried to mark the attachment file and click open, and It result that the attached file just opened normally without creating a link to the file).
3.      Choose Tools > Content > link, and select the area for the link
Here I mark the text on side 10 from which I wish to make a link to a attached file
4.      In the Create Link dialog box, set the link appearance, select Go To A Page View, and then click Next
Here I have selected ‘Go to a page view’ as told and I click Next
5.      Set the page number and view magnification you want, either in the parent PDF document or in the file attachment, and then click set link.
Here I go to the navigation pane and mark the attached file from the file list (the files in the list hasn’t any side number in the list) and then I click Set Link.
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
What do I do wrong.?
Med venlig hilsen
Mogens Pedersen
Specialkonsulent
T 33 63 13 07
F 33 63 10 11
[email protected]<mailto:[email protected]>
Fra: Bernd Alheit [email protected]
Sendt: 2. marts 2012 13:11
Til: Mogens Pedersen
Emne: Help Please - having difficulties creating af link from the text to an attached file i acrobat
Re: Help Please - having difficulties creating af link from the text to an attached file i acrobat
created by Bernd Alheit<http://forums.adobe.com/people/Bernd+Alheit> in Creating, Editing & Exporting PDFs - View the full discussion<http://forums.adobe.com/message/4241290#4241290

Is it possible to pass TABLE as the output parameter in stored procedure

Hey Experts,
Is it possible to pass TABLE as the output parameter in stored procedure.
eg
create procedure spGetData
@tableName as TABLE(intValue INT NOT NUL)
as

You can use OPENQUERY or OPENROWSET, as mentioned above, to make stored procedure results table like. There are
some limitations with these methods:
http://technet.microsoft.com/en-us/library/ms188427.aspx
In OPENQUERY this-sql-server-instance can be used instead of a linked server name. It requires setting data accces server option:
exec sp_serveroption @server = 'PRODSVR\SQL2012'
,@optname = 'DATA ACCESS'
,@optvalue = 'TRUE'
LINK: http://www.sqlusa.com/bestpractices/select-into/
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Creating a link with the Link Tool

I used the Link Tool to create a Link in my pdf file. The link is set to open a website file. I created 2, one with just a little text and the other was a picture that was 200 X 300 px. When I follow the links, each is opening a full web page. I expected that with the Text link because I put the text on an html page but the picture I sized to the 200X300 but that opened a full web page also. When setting up the link to the Web File I did not see an additional settings as far as how to open the web page such as _parent or _child etc. I believe it is normally the Target.
Does anyone know how I would either do this with the link tool or know of a better way to do it overall?
Thanks
Bob

Hi,
You may be confusing HTML markup for links with PDF links.
In PDF, HTML markup is not applicable.
So "target_xxxx" or any other HTML 'stuff' cannot be used.
For the graphic file (JPG, PNG, whatever), make a web page file that is configured to display the graphic file in a manner you desire.
The web link you set in the PDF, with Acrobat, will result in this web page file opening.
This is the file that will control how the graphic is rendered.
If needed, a resource for HTML "how to" is W3 Schools.
Be well...

How do I create a link to the middle of a page with Inherit Zoom?

I keep going around and around on this. I am using Adobe Acrobat XI Pro and I'm trying to create an internal link in the PDF to go to the middle of the page somewhere else in the same document. I don't want to change the user's zoom level.
I can create a bookmark that does this by adding tags and having the bookmarks created from those tags (which is a ludicrious process, but at least a way). But links don't seem to attach to bookmarks or tags.
I can create a link that does exactly this by creating a document in MS Word, using styles and links to those styles and then saving it as a PDF. So I know the PDF itself can do this, I just can't figure out how to do it through Adobe.
Is there any way to create a link to a tag or to a bookmark? Setting a link to Page View always changes the zoom level, and then if I change the zoom back to Inherit Zoom the link just goes to the top of the page.
Any ideas?
Thank you,
Chris

Hrm, I feel like I'm just missing something obvious. Here are the exact steps I'm taking:
Have zoom level up high enough so you're only seeing part of a page.
Click "Add or Edit Link"
Draw a box around the text.
Link Appearance:
Link Type: Invisible Rectangle
Highlight Style: Invert
Link Action: Go to a page view
Click "Next"
Scroll down so I'm looking at the middle of the next page.
Click "Set Link".
Right-click on the link-box and click "Properties..."
Click "Actions" tab and then "Edit" and change the Zoom to "Inherit Zoom". "OK" back to the page.
Change zoom level, use the hand icon and click on the link.
I'm taken to the top of the correct page and my zoom level doesn't change. I am not taken to the middle of that page, though.
Do you experience different behaviour?

How to create hard links in the Finder?

Does OS X provide any way to create hard links for files, or is using the Terminal and the "ln" command the only way to do so?

You can create an alias in the Finder using File -> Make Alias or by command-option-dragging a file. An alias is similar to a hard link. If you're already aware of this and specifically want to make a hard link and not an alias, that's something you'll have to do in the Terminal.

How to create new documet from the output of another document automatically

Hi all
here is the scenario, If we are creating an debit memo request and debit memo to a customer, from the output of this debit memo we need to trigger the creation of another document( Ex credit memo to another customer) automatically, how we can do this?

Hi Dev,
You need to create another report program for the other document along with the smartform.
In the report program, you have to put your logic on how the other document has to be found when your document is created and the output be triggered.
So in principle,
There will be two programs linked to your output type.
One will create the output of the document which is being created,
Another program will automatically call the other target document in change mode and trigger the same output, during which the second program will be executed.
Now the second program will create the output for the second document.
Making copy controls wont help for this reqmt.
Reward points if it helps.

How to create multiple pages in the output file?

hi, we have an application (C++) that generates PDF output. I've been asked to figure out how to create multiple copies of each page (uncollated). i.e. the output would be 4 copies of p 1 followed by 4 copies of p 2, etc. I'd like to do this without actually replicating each page if possible ... any ideas?

Why not just put four copies of the same CosObj reference into the Pages array/tree?

How to remove namespace link from the output XML

i have to remove 'xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions"' (namespace) from the output xml file which is generated from the BIP. I need my output XML file without that namespace link, this namespace link is coming for each element.
Anybody know how to do that please help.
output xml file
<?xml version="1.0" encoding="UTF-8" ?>
<Reports version="2.00">
<deliveryNote xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions">
<subjectId />
</deliveryNote>
<deliveredReports xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions">
<referDate>[Delivery note->H4]</referDate>
</deliveredReports>
<simpleReports xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions">
<numberOfReports>2</numberOfReports>
<nReport>
<reportName>Xyz</reportName>
<reportVersion>1.0</reportVersion>
<observations>
<numberOfObservations>15</numberOfObservations>
<columnObservation>
<y>9</y>
<rO>
<x>14</x>
<o>11</o>
<o>21</o>
<o>121</o>
</rO>
</columnObservation>
</observations>
</nReport>
</simpleReports>
</Reports>
my xslt file
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions" >
<xsl:output method="xml" encoding="UTF-8"/>
<xsl:template match="/">
     <xsl:element name="Reports">
          <xsl:attribute name="version">2.00</xsl:attribute>
               <deliveryNote>
                    <subjectId></subjectId>
                    </deliveryNote>
               <deliveredReports>
                    <referDate>[Delivery note->H4]</referDate>
               </deliveredReports>
               <simpleReports>
                    <numberOfReports>2</numberOfReports>
                    <nReport>
                              <reportName>Xyz</reportName>
                              <reportVersion>1.0</reportVersion>
                                   <observations>
                                   <numberOfObservations>15</numberOfObservations>
                                   <columnObservation>
                                        <y>9</y>
                                        <rO>
                                             <x>14</x>
                                                  <xsl:for-each select="TEST_XML/LIST_R1/R1">
                                                       <o><xsl:value-of select="xdoxslt:lpad(COL1,10,' ')"/></o>
                                                  </xsl:for-each>
                                        </rO>
                                   </columnObservation>
                                   </observations>
                         </nReport>
                    </simpleReports>
          </xsl:element>
</xsl:template>
</xsl:stylesheet>

Please post the same in BI Publisher forum
BI Publisher
Thanks,
Vino

How can i create a link in the context help from frontpanel elements like knobs and so on

i want to create on context sensitive online help and therefore need to know how i can place a hyperlink in the context help from labVIEW of a frontpanel element

lotto;
You can place your help file in LabVIEW help directory, which should be in \help. If you place your help file in that directory, then when you start LabVIEW, you can access your help from LabVIEW's help menu (there will be an extra entry with the name of your help file.)
To link your control or vi to this help file, open the front panel (or the panel where you edit the control) and open the VI setup. In the help path field write the following:
:\name.hlp
Where "name" in the name of your help file. in the "Help Tag" field you should enter the tag you already assigned to the topic in the help at design time. (I suggest the tag to be similar as the vi or control name.)
After all this, the next time you start LabVIEW,
you should be able to access the context help file to your control or vi by right-clicking on it and selecting "Online Help".
IMPORTANT NOTE: Be aware that you may loose files you locate in special directories in LabVIEW, like the help, because those directories might be overwritten when you upgrade your software. Another option can be to locate your help file in a directory other than LabVIEW's help. The steps are almost the same, except that you won't be able to access your help file from LabVIEW's help menu.
Best regards;
Enrique
www.vartortech.com

Archivelink smartforms - Is it possible create a link if the output is XML?

Similar Messages

Maybe you are looking for