Archiving the File in the same source folder

Hi EveryBody,
I have a file to file scenario.
Scenario Description :
I have 10 source folders and one Communication channel.I am picking the files from different source folders (with .txt extension) using the option Advance Selection for Source File in the CC.
I am able to pick the files,do the Content Conversion and process them.
Now i want to archive these files in the same source folder from where i pick.The Archive Filename will be same as the Source Filename with the extension changed to .eof (for example if i have a file in folder X with the name input.txt then it shld be picked and archived in the same folder X with the name input.eof).
Can somebody help me out on this?
How can i do this?
Is there any option to do such type of archiving for any number of folders using a single Communication channel?
Adapter Module is one of the option but is there any other option?
If Adapter module is one of the option , can somebody expain me the Module execution flow for the sender file adapter , that is whether custome model will execute first or standard module is executed before that.
Helpful answers will be rewarded with points.
Thanks,
Zabiulla

Hi
While configuring your communcitation channel, in the processing tab --> processing mode,you need to select the archive mode and then specify the path as to where you want to post it, in your case it will be the same path as to your source path, give the same path and specify the name of the file as to what name you want to archive
Hope this clears your doubt
Thanks
Saiyog
Edited by: Saiyog Gonsalves on Jun 4, 2008 12:14 PM

Similar Messages

When I go to my downloads folder on my dock and click the file all the content shows up but as soon as I go to open it in the finder, I get a blank window. Has anyone else had this problem, if so, How do you fix it.

When I go to my downloads folder on my dock and click the file all the content shows up but as soon as I go to open it in the finder, I get a blank window. Has anyone else had this problem, if so, How do you fix it. I also cant delete anything from this folder because of it. Any help would be greatly appreciated.

Hey Allen,
I am having the same issue here in September. How did yor situation get resolved. My iPad Siri works great. My iPhone 5 Siri has been out of comission (OOC) for almost a month and I am beginning to get a little frustrated since Siri works so well in July....ANY assistance would be highly appreciated... Thanx

PI is not able to pick the file from the FTP folder

This is the FILE TO IDOC scenario. We have configured the file adapter. But its not able to pick the file from the specified directory. We have tried changing the transfer mode from Binary to Txt & also we have tried to put advance selection for source file but it didn't work. Its throwing the below error:
PI Adapter Log:
An error occurred while connecting to the FTP server '10.130.150.21:8529'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 451 Unexpected reply coderequested action aborted: local error in processing'. For details, contact your FTP server vendor.
Also we have contacted the FTP team & they told that PI is sending an unsupported command. So instead of taking the file TLOG.txt, its treating this file name a s a directory. Please find the logs from FTP end below:
FTP Log:
(207197)2/5/2013 14:48:25 PM - sysisappi (63.130.82.16)> 230 Logged on
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> FEAT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211-Features:
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MDTM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> REST STREAM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> SIZE
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLST type*;size*;modify*;
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLSD
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH SSL
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH TLS
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> UTF8
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CLNT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MFMT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211 End
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ 0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 PBSZ=0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 Protection level set to P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD /Qas
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas" is current directory.
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD SAP_ORION
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD Inbound
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD IRIIN04
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 221 Goodbye
It should list *TLOG.txt* but instead it is trying to get into a directory named *TLOG.txt*. same for other interface.
So me & my team is struggling for last couple of days to fix this issue.Please share your suggestion

Hi Sisir
The screen shot of your config doesn't seem to correspond to the FTP log. I say this because the * is dropped from file name pattern "*TLOG.txt" (comparing your config and the FTP log). Can you share an updated FTP log?
Sisir Das wrote:
"/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
Also, like Rajesh suggested, have you tried to manually check permissions by logging in, traversing the directory, and getting the file?
By the way, we always use backslash \ instead of forward slash in our configs. Not sure this would make any difference for you though. Also, I don't normally use a trailing \ at the end of the source directory path.

How do I empty all the files in the "Downloads" folder ?

How do I empty all the files in the "Downloads" folder ? Can they all be deleted at once?

PS: when you look into the menu bar commands by mouse, you may note
there are keyboard shortcuts to perform the same tasks; such as they are.
*Edit> Select all* = uses 'Command + A' keys to do this, without mouse/menu.
And, it can be done quickly by keyboard. +(this will select all, for the next step)+
You would have to select the folder to be edited; yet there also are other key
board commands to select items, folders, applications, etc all without a mouse.
Once you choose items in a folder or other location, you can then use a
keyboard command to Move them to the Trash; from there, Empty Trash
with a three-key command; all without use of the mouse.
The keys to *Move to Trash* looks like it is 'Command + Delete'. Some key-
boards have two marked delete keys, so you may have to try both. The
+small delete key+ has an icon with right-facing x in a box.
The three keys, to *Empty Trash* via keyboard instead of menu bar/mouse
appear to be the combination of 'up-arrow, command, delete.'
Understanding some of the iconography of symbols used to indicate function,
or what keys to use, as indicated by icons instead of words, is not too hard.
There are articles and web pages which show various keyboard shortcuts.
Here's an example, from one of several I've bookmarked over a few years.
This one has images and shows what the key shortcut symbols mean.
• Mastering Keyboard Shortcuts: (from myfirstmac site)
http://www.myfirstmac.com/index.php/mac/articles/mastering-keyboard-shortcuts
• Mac OS X keyboard shortcuts:
http://support.apple.com/kb/HT1343
However, if you have anything you may want to keep before mass deleting, be
sure to move it into another folder. +re: The docked folders in Leopard+ 10.5 have
one .PDF in each, about each of the purposed folders. I haven't deleted mine yet.
{And I've added another folder into the dock near the Trash for my own alias items
and the original is on the hard disk drive (one user) or could be put into an account
folder so it would not have permissions or privilege issues with a second account.}
I'd thought about those 'keyboard symbols' after the first posting; but,
had to take an elder parent on several errands that took quite awhile.
PS: there probably are ways to use AppleScript and Automator to handle folder contents.
Good luck & happy computing!

How do I remove or delete files within a document folder? I have tried dragging the files to the trash and it does not work

How do I remove or delete files and image files within a document foler? I have tried dragging the files to the trash, but that is not working.

Right-click (or ctrl-click) on a file. If the "move to Trash" option is greyed out, select "get info" and read the permissions at the bottom of the info window.
Wat are they?
Do the same for the enclosing folder - what permissions does that have?

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why?

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why? I have a heirarchical embedded folder structure under \Documents. Usually, as I drag the file to be moved over the various folders, they will blink twice, then expand/open to reveal contents (in Finder). Now, when the file to be moved is held (hovering) over the destination folder, it will not blink or expand, so there's no place to drop the file. If I release the mouse button, the file image disappears, showing that it is "going back to the place it came from", a.k.a. was not moved. This just started happening. I noticed it after upgrading to Mavericks. Is this a bug or could anything else be causing this?

As of today, Apple Support discovered during a remote support session with me that the same thing happens on their own system. It is isolated to "Column View"; the Icon and List views in Finder behave correctly. Issue is being escalated to engineering, and Apple will call to report status in a couple days. In all likelihood, this is a bug that will need to be addressed in a future update.

Adobe PDF (Print) presets: "Cannot create the file. The folder may be write protected."

In Windows 8, this feature of InDesign CS6 only works for the local Administrator account:
File -> Export -> Save as type: Adobe PDF (Print) -> Save -> Save Preset... -> OK
If you try it with any other account this error message is given: "Cannot create the file. The folder may be write protected."
For anyone else encountering this problem, a workaround is to run as administrator.

Which permissions exactly did you set, how did you set them and what did you set them to?
The path to the Drop Box would be /Users/someuser/Public/Drop Box but you obviously wouldn't want the ownership and permissions to be the same on all four directories.
Have you tried using Disk Utility (/Applications/Utilities/Disk Utility) to repair permissions? That would probably be the best way to ensure they're correct.
- cfr

I'm trying to put movies onto my hard drive but i can't put the files with the same name onto the hard drive , finder won't let me change the name

I'm trying to put movies onto my hard drive but i can't put the files with the same name onto the hard drive , finder won't let me change the name. What am i doing wrong?

Make a new folder and put them in that different folder. Then the names can be the same as others already on your drive.

When saving image i want that firefox auto change the file name if same name exists like google chrome etc. if there is any option pl let me know.

when saving image i want that firefox auto change the file name if same name exists, like google chrome does this. if there is any option pl let me know.

this saves images, i just want to save single image, and wants while saving image, it auto changes the name if find similar name of file in the folder. chromium and maxthod does this

HT203200 Cannot delete the file from the itunes folder

I cannont delete the file from the itunes folder because it tells me I need permission to do so. I am the admin person for the laptop plus I have checked my permissions under the security tab in the files properties. How do I delete this file to start again? It downloaded 1.2GB of the file before the error message appeared, so its paid for and all but not looking like I'll get to watch it before the time runs out on the movie being available for me to watch. :-(

Try deleting the file without iTunes running.
When you next open iTunes it should then be marked as a missing file and you should be able to delete the entry from iTunes.
Hope this works
Regards,
Colin R.

How can I get a pdf. to open in Safari, all i'm getting is a new window with a black, blank page, instead of the pdf., and I don't want to save the file to the desktop, Safari didn't use to do that, and I don't have Adobe in the internet plug in folder.

How can I get a pdf. to open in Safari, all i'm getting is a new window with a black, blank page, instead of the pdf., and I don't want to save the file to the desktop, Safari didn't use to do that, and I don't have Adobe in the internet plug in folder.

Hi
Please take a look to this thread Re: Can I refresh the browser rather than open a new tab?

How can I add .m4r files (thatI have shortened to 30 seconds or less) to iTunes 11.0.1? I cannot find a ringtones folder in Itunes ans it won't let me drag the files to the sidebar...

How can I add .m4r files (that I have shortened to 30 seconds or less) to iTunes 11.0.1? I cannot find a ringtones folder in Itunes and it won't let me drag the files to the sidebar...thanks!

How can I add .m4r files (that I have shortened to 30 seconds or less) to iTunes 11.0.1? I cannot find a ringtones folder in Itunes and it won't let me drag the files to the sidebar...thanks!

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder.

Bridge will do the job. View > Sort > ByType. Then you can choose a group of one type and put the files in a separate folder.

HT4796 I have made a file using the Pages app.I mailed it to a friend.When she tried opening the same file on her pc at home , It did not open.Please help me as to how to open the file in the Microsoft word format on her pc.

I have made a file using the Pages app.I mailed it to a friend.When she tried opening the same file on her pc at home , It did not open.Please help me as to how to open the file in the Microsoft word format on her pc.

Send it as a PDF.

HT1751 After "Restoring iTunes Library Backup" it wont link to the files in the iTunes folder. I've followed the correct procedure, and iTunes lists all my music correctly (but with no artwork), but can't locate any of the files. Using Windows 7. Help ple

After "Restoring iTunes Library backup" it wont link to the files in the iTunes folder. I've followed the procedure as described, and the iTunes folder is in the correct location. iTunes lists all my music correctly (albeit with no artwork), but can't locate any of the files.
I've been restoring my iTunes folder from a backup hard drive to a new computer on which I've downloaded the latest iTunes (10.7). If this is a newer version than the one I backed up with could this be the problem? (I had the latest (to my knowledge) iTunes when I backed up the folder about 3 weeks ago, was this version 10.7?)
Or is the version of iTunes (within recent updates) not an issue when restoring a library?
Using Windows 7.
Any help please?

From the top of the page where the scripts live...
The general method of use is to download the script to a folder of your choice, e.g. your Desktop, Downloads folder or create a folder at ...\iTunes\Scripts. Select a playlist or highlight some tracks in iTunes and then double-click on the script to execute it. If no specific tracks are selected the script will try to work with all tracks in the current playlist. Some scripts offer a choice of track by track confirmation of changes or fully automatic processing of the selection. Many of the scripts can optionally display a progress bar while running.
You are strongly advised to backup your entire library, or at the very least the iTunes Library.itl file, before use. Test the behaviour of your chosen script on a small group of files first to make sure it does what you want before applying it to large numbers of files.
Most builds of Windows will execute *.vbs scripts when you double-click them. If that doesn't happen then you might need to visit the Add/Remove Programs or Programs & Features control panel to enable the Windows Scripting Host. I can track down details if you have issues.
Backing up and restoring data is an area that is often glossed over. Most people don't try to learn much about it until they've lost something important. (Me too )
If your iTunes library was in the usual layout then normally copying the whole iTunes folder from the User's Music folder in the old computer to the User's Music folder in the new one will usually work fine. Ideally this is done before iTunes is installed so that there is no empty library to replace, and all settings are picked up from the old library. This post contains more details.
tt2

Archiving the File in the same source folder

Similar Messages

Maybe you are looking for