When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why?

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why? I have a heirarchical embedded folder structure under \Documents. Usually, as I drag the file to be moved over the various folders, they will blink twice, then expand/open to reveal contents (in Finder). Now, when the file to be moved is held (hovering) over the destination folder, it will not blink or expand, so there's no place to drop the file. If I release the mouse button, the file image disappears, showing that it is "going back to the place it came from", a.k.a. was not moved. This just started happening. I noticed it after upgrading to Mavericks. Is this a bug or could anything else be causing this?

As of today, Apple Support discovered during a remote support session with me that the same thing happens on their own system. It is isolated to "Column View"; the Icon and List views in Finder behave correctly. Issue is being escalated to engineering, and Apple will call to report status in a couple days. In all likelihood, this is a bug that will need to be addressed in a future update.

Similar Messages

Transfering files using drag and drop to Nano P

I havent installed the supplied disks that came with my Nano Plus but am transfering files using drag and drop from "my music" folder on my computer to the Nano. These files are stored on my computer as the Name of the Artist as the folder name with a sub folder named the CD title (default setting when using Windows media to rip) with the individual track files in that folder.
When I drag the main folder over to my Nano it just displays the Album title on the screen but not by artist and there is no way to select by artist (you can just switch "folders" on the Nano which will then display the CD title. If I used the supplied software with my Nano to transfer the files will I be able to choose by artist, CD, Genre, etc or is this not a function of the Nano?
Is it best to just select the individual song tracks and throw them in one large group on the Nano and then it can figure out which artist, album, genre they belong to?

The player will only show directories that contain music files.
The behaviour you want is common on players that manage their content with a database (typically HD-based devices), but Creative's flash players don't work that way (and the software used on the host computer doesn't have any influence on this - the user interface is controlled by the player's firmware).

Start Workflow when Upload File using drag and drop

Hi,
I am working with SharePoint 2013.
I have a workflow needed to be started and run only once after a document is uploaded into the document library. The document library has
required custom columns with default values. If I set workflow starting option as 'On Created', when user got redirected to the edit form and click 'Save', there would be error as
"The <filename> has been modified by <user> on <datetime>". Besides the unwanted error dialog, the metadata entered by users are not reflected. I understand the issue is because the workflow had already started before
the edit form showed and it modified the file.
So I changed the starting option to 'On Changed", created an additional column to record if the workflow has been run or not to avoid running the whole workflow more than once. This works fine for normal upload. However on drag and drop, the
event 'On Changed' is not triggered and the workflow is not started. I checked the version of the file but in both normal upload and drag and drop, there is another version after the first version. But
only the version of normal upload triggers the workflow.
I read an article about some Mode = Upload on the edit form.
https://go4answers.webhost4life.com/Example/workflow-triggered-during-upload-user-149297.aspx
It seems that the Mode = Upload is not there anymore for normal upload, but it's still there for drag and drop. Not sure about this
Is there a solution for my case. Basically I want to start the workflow only once when the document is uploaded normally or via drag and drop. For normal upload, user can
edit the custom metadata right after they browse the file. For drag and drop, the
metadata will be set as default values.
Thank you.

I'm still researching your issue, but as an interesting note... This is an issue only when I use a 2013 style workflow. I do not get the error when using a 2010 style workflow.
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

Problem Copying Files using Drag and Drop in Finder

When I try to copy files from a camera's SD disk into a folder in Finder, it always seems to copy the files to some other location other than the folder I drag and dropped to. And then, when I try to redo the drag and drop, I get a message that these files already exist in the desired folder, even though I don't see them there!
Also when I create a new folder in Finder, it never places the new folder under the folder I've currently highlighted.
I'd love to hear whats going on here!
Ted

tedpratt wrote:
When I try to copy files from a camera's SD disk into a folder in Finder, it always seems to copy the files to some other location other than the folder I drag and dropped to. And then, when I try to redo the drag and drop, I get a message that these files already exist in the desired folder, even though I don't see them there!
What Finder "view" option are you using, List, Icons, Columns, or Cover Flow, for this question and the one below? Are you dragging those photos onto the icon of a closed folder or somewhere else? Please describe the exact process that you're executing.
Also when I create a new folder in Finder, it never places the new folder under the folder I've currently highlighted.
When you say "under", do you mean "within"? A new folder will be placed in the folder that's open.

I have been backing up iMovie 08 files to my external drive, but for some reason I can't open these files in iMovie. I used drag and drop to copy them.

I have been backing up iMovie 08 files to my external drive, but for some reason I can't open these files in iMovie. I used drag and drop to copy them.

You really should be doing backups with an actual backup application, especially one that will work automatically, and, if your external HD is large enough, back up your entire system. These can automatically back up only what's changed since the previous backup, and some will keep "archive" copies of things you've changed or deleted, also.
Too many things can go wrong, such as your internal HD failing, and you'll have a major project to reinstall everything.
You already have Time Machine, built-in to OSX. You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions.
#27 in the second link mentions some alternatives, too.

Images resizing when using drag and drop

We just recently got PS Elements 7. I have a blank image that is sized at 600 x 1662 pixels. When I want to put a photo into that blank, I make sure that the photo is 600 pixels high. With 6, what I used drag and drop from the bin, the photo fit perfectly. With 7 it is apparently resizing the photo and I have to stretch it to fit. Is this something that I have set wrong? If I am making sure that both items should fit together based on number of pixels, why is one changing size? Something has to be changing size or the items would fit together. I am assuming that something is set wrong, because this just does not strike me a something that should happen, or the program is not a very efficient photo editor. If necessary I will go back to 5.0, although there are things that I like better in 7.
jean @ buffaloworks

I'm frankly surprised you had success with this in PSE 6, since the past two versions create a special kind of smart object from images dragged up from the bin. You can use copy/paste to create a regular layer, or you can drag down to a thumbnail in the bin from an open image, but the project bin doesn't let you drag up anymore, by design.
Did you mean to say PSE 5 rather than 6? It worked normally there.

How do i drag indicator control type on WPF instead of using Drag and Drop points

In my WPF application, i have a window which is docked with the screen. i want to automate to expand the window using an Indicator control type, by sliding it. As of now i use StartDrag and StopDrag using specific points, which is not correct when it runs
in many other screens.
Could you please let me know, is there way to slide the control (to set window display size to viewable) without using drag and drop action using points.

Hi Pavithra,
>> As of now i use StartDrag and StopDrag using specific points, which is not correct when it runs in many other screens.
To really understanding this issue, could you share us what you mean by ”which is not correct”? It would be much helpful if you could share us a screen shoot about your UI and your issue.
>> Could you please let me know, is there way to slide the control (to set window display size to viewable) without using drag and drop action using points
Do you mean that the control of the WPF is invisible and you want to set the window display size to make it visible? If so, I think you could use the Mouse.MoveScrollWheel Method to change the windows view until the control is visible. The link below might
be useful to you:
# CodedUI cann't find the controls outside the screen view, Mouse.MoveScrollWheel doesn't work too
https://social.msdn.microsoft.com/Forums/vstudio/en-US/e1dba9ee-dc51-4160-9a1a-a2220c903db0/codedui-cannt-find-the-controls-outside-the-screen-view-mousemovescrollwheel-doesnt-work-too?forum=vstest
If I misunderstood you, please feel free to let me know.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Mail doesn't attach files through dragging and dropping the files!

Help please,
Mail doesn't attach files through dragging and dropping the files on OS X ML, it crashes for a while !!

Open Disk Utility and Repair disk permissions on the First Aid tab.
Then, Restart and boot into Recovery Mode by holding down cmd-r on restart until you see a gray screen. When the Mac boots, you will be presented with some options. Choose Disk Utility and select your Hard drive volume (Macintosh HD is the default name). Then, on the First Aid tab, click Repair Disk (not permissions).
If that doesn't help, you could try installing the 10.8.2 combo updater from the Apple Downloads site:
http://support.apple.com/kb/DL1581

Using drag and drop property in forms.

Hi all,
I want to use drag and drop property in a form during
runtime.I am using oracle 7.3.I don't want to call any
another application.
Is there any way?
Thx in advance.

Mona ! First tell your problem in brief ..Actually what you want
on runtime ...would you like to fetching the data from one item
to another or change the position of any item or
pushbutton ...or what..give detail ...obviously i can help you..
there are many commands like set_item_property ,
get_item_property but right now i could not understand your
prob ..tell me in brief..
You can ask me at [email protected]..
-Anwar

Programatic Generation and positioning of components using Drag and Drop

Hi,
I am relatively new to ADF and UI Designing. Im trying to generate a flowchart using drag and drop feature in ADF. This involves creation of dragging images such as start,decision .. etc from one panel to another and dynamically creating a flowchart.
Up to now i have managed to drag images from panel1 to panel2 and create them dynamically in the bean class. However im stuck at this point .. Im not able to position the draggable components on the desired position in the panelGroup. They either appear horizontally or vertically.
Is there any way to achieve this. Also is it possible to assign a dropTarget to a a target component which is created dynamically ?
Thanks in anticipation ....
Lyle

Hi Lyle,
I am too only 4 months old to adf ,i use jdeveloper 10g.
In 10g for the components to be placed at desired locations i think is somewhat possible. While you can arrange them by using spaces which causes
f:verbatim tag to appear or you can use ADF Faces Core items like Object Spacer and Object Seperator where you can set their length and width to space objects on page...
Regards
Rohit

HT201401 use a iphone4S and I will say that since I installed IOS6, I block 2-3 seconds the screen, when you open a page in Safari, I salt directly into the sprinboard, and going harder, moving hard, last version I had no problem ...I hope to get a new ve

I use a iphone4S and I will say that since I installed IOS6, I block 2-3 seconds the screen, when you open a page in Safari, I salt directly into the sprinboard, and going harder, moving hard, last version I had no problem ...I hope to get a new version IOS6.
had anyone this problems?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Illustrator keeps quitting-notice others have had similar issues, not resolved-so what it the reason for "sending a report" to Adobe if nothing can be done with it????? paying for a product that I can't use when I need to use it and no help-come on-someon

Illustrator keeps quitting…notice others have had similar issues…so what it the reason for "sending a report" to Adobe if nothing can be done with it????? paying for a product that I can't use when I need to use it and no help…come on…someone has to have an answer…HELP Pleeeeease

<moved from Adobe Creative Cloud to Illustrator>
reset your preferences -
acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
if that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

Image size changes when moving an image between Lightroom and CC.

Image size changes when moving an image between Lightroom and CC.
I opened a .dng image in LR and then opened it in the Develop module. I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
I click Cntl-E and the image opens in CC. There I click on Image > Image Size and the Image Size is 13.288 inches by 20.533 inches.
Why does the image size change?
I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
Help!...Please?

The penny will drop soon or maybe the cloud will lift.
In Lightroom all editing is undoable/nondestructive.
Hence a crop of 3x2 is not inches, centimetres, pixels or anything else. It is jst a ratio. When a file is exported, either to PS or disk, then the crop ratio has size determined in respect of pixels and inches or cms.
So my 6000x5000 pixel image I will crop to 3x2 that leaves (before exporting) a 6000x4000 file.
Now when exported it can be set to export at
100pixels per inch and will end up at 60x40" when printed.
200pixels per inch will end up at 30x20"
300ppi will end at 20x13.3"
You will notice in the Crop Tool there are no size denominations such as inches or centimetres as an image file only has pixels and the determination of size is done through exporting or printing.
Hope that helps somewhat..

Want To create Zip file using java,And Unzip without Java Program

I want to create a zip text file using java, I know Using ZipOutputStream , we can create a zip file, , But i want to open that zip file without java program. suppose i use ZipOutputStream , then zip file is created But for unZip also difftrent program require. We cant open that zip file without writing diff java program.
Actually i have one text file of big size want to create zip file using java , and unzip simply without java program.Its Possible??
Here is one answer But I want to open that file normal way(
For Exp. using winzip we can create a zip file and also open simply)
http://forum.java.sun.com/thread.jspa?threadID=5182691&tstart=0

Thanks for your Reply,
I m creating a zip file using this program, Zip file Created successfully But when im trying to open .zip file i m getting error like "Canot open a zip file, it does not appear to be valid Archive"
import java.io.*;
import java.util.zip.*;
public class ZipFileCreation
     public static void main (String argv[])
     try {
     FileOutputStream fos = new FileOutputStream ( "c:/a.zip" );
     ZipOutputStream zip = new ZipOutputStream ( fos );
     zip.setLevel( 9 );
     zip.setMethod( ZipOutputStream.DEFLATED );
//     get the element file we are going to add, using slashes in name.
     String elementName = "c:/kalpesh/GetSigRoleInfo092702828.txt";
     File elementFile = new File ( elementName );
//     create the entry
     ZipEntry entry = new ZipEntry( elementName );
     entry.setTime( elementFile.lastModified() );
//     read contents of file we are going to put in the zip
     int fileLength = (int)elementFile.length();
     System.out.println("fileLength = " +fileLength);
     FileInputStream fis = new FileInputStream ( elementFile );
     byte[] wholeFile = new byte [fileLength];
     int bytesRead = fis.read( wholeFile , 0 /* offset */ , fileLength );
//     checking bytesRead not shown.
     fis.close();
//     no need to setCRC, or setSize as they are computed automatically.
     zip.putNextEntry( entry );
//     write the contents into the zip element
     zip.write( wholeFile , 0, fileLength );
     zip.closeEntry(); System.out.println("Completed");
//     close the entire zip
     catch(Exception e) {
e.printStackTrace();
}

I accidentally quit my CC on my Macbook pro and now the cloud icon is grayed out and every time I hover over it with the mouse I get the spinning beach ball of death on the icon. I have no idea how to open it because when I use spotlight search to open it

I accidentally quit my CC on my Macbook pro and now the cloud icon is grayed out and every time I hover over it with the mouse I get the spinning beach ball of death on the icon. I have no idea how to open it because when I use spotlight search to open it it gives me a message saying "Creative Cloud is not open anymore" help!

Since you didn't include any pertinent info such as the Mac model and OS version you are running, here is some general information:
Mac OS X: Gray screen appears during startup
Depending on which OS yours came with originally - and which OS you are now running - you would either need your original install disks - you can call Apple for replacements by giving them your serial number. Or you may be able to reinstall the OS by using recovery (again, depends on which model/which OS).

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why?

Similar Messages

Maybe you are looking for