ARD 3.1 does install update with each launch

Is this normal? If not, how do I stop this activity?

It will do this if you have logged in with a user which is not an admin user. It doesn't have the priveleges to complete the update process.

Similar Messages

  • WSUS throwing 13002, "Client computers are installing updates with a higher than 25 percent failure rate. This is not normal."

    Hello,
    Within the past two months our WSUS Server started throwing error 13002, "Client computers are installing updates with a higher than 25 percent failure rate.  This is not normal."  We currently have 252 computers with errors in WSUS,
    and 33 updates with errors.  We have never had issues up until two months ago.  If you keep rebooting the machine, and keep running updates, they eventually all install.  I believe I will see the machines with errors go away as the weekly scheduled
    WSUS install runs over and over, and the machines reboot.
    - We run IE8 in our environment and sometimes IE9.
    - We have 300 clients, all running Windows 7 SP1 x64.
    - Our WSUS server is running on Server 2008 R2.  The WSUS build number is 3.2.7600.262.
    - We created an alternate WSUS 4.0 server on Server 2012, and redownloaded all updates.  We put one client on it and it is showing errors on 3 updates, KB890830, KB931125, and KB2917500.
    - Clients are throwing errors 800F0902, 80242016, and 80070005.
    - I've noticed something with the C:\Windows\SoftwareDistribution\Download folder on the clients.  When an update runs and fails, there is a "Install" folder created inside this folder.  If you try to open it after the failure you get
    "Access Denied"  If you reboot the machine, the install folder goes away.  (I assume this is a temp folder created to run updates).  I've checked the permissions on this folder on various machines and all seems normal.  I think
    this is the root of the problem, and why we need to keep rebooting to get all of the updates to run.  
    - I tried deleting the Software Distribution folder on a client after stopping the update service, then restarting the update service.  The folder redownloads but the client still throws errors.
    - I've gone through our Group Policies looking for anything that can cause this and found nothing.  We've created a test OU blocking inheritance, and only applying a WSUS policy in it to make it get the updates internally.  I then rebuilt multiple
    machines using Dell KACE, and still had failures.
    - We run SEP 11 and 12 on our clients.  I've tried removing the AV, making sure the firewall was off, etc.  It still throws errors.
    - I've spoken with our network team, and installed wireshark on a few clients looking for network errors and found nothing.
    - I've tried various Dell KACE scripted installs on test machines (erasing and rebuilding the machines from scratch), after which I run Windows Updates from WSUS.  They have thrown errors.
    - I've rebuilt a machine using Dell KACE, undomained it, then ran updates externally from WSUS going to Microsoft's site, and I'm still getting errors.
    - I've tried removing all software from the Dell KACE build to where it is just installing the OS and I'm still getting errors.
    - I tried taking a plain Windows 7 x64 DVD and installing that on a test machine, then without domaining it and without installing any other software, running updates from Microsofts update site.  This seems to work, althrough it does throw some errors
    but I believe those are related to having to reboot your machine in order to complete the updates (I can't remember that error code at the moment).
    Has anyone else been experiencing this?  Any suggestions as to how I can fix this?

    Hi,
    Error 800f0902
    Please try the method in this thread:
    Error
    Code: 800f0902
    Error 80242016
    If you receive Windows Update error 80242016 while checking for updates, it might be caused by a connection interruption between your computer and the Windows Update servers.
    80070005
    Usually means access denied
    Since it worked perfectly for a while, did you make any change on the server? Any applications new installed on clients?

  • Auto-install updates, with no user interaction?

    Due to problems with malware, we can't really trust everyone to be logged on with administrator privileges all the time as it used to be with Windows 2000 and XP. Consequently the installed software can not be modified by staff anymore.
    This doesn't affect Windows Updates since those can be configured to install automatically on a schedule without any user interaction or privilege elevation.
    Java for Windows however does not detect when a logged in user does not have administrative rights, so it offers updates to everyone who logs on, including people who can not and will not ever be able to install the updates.
    One "solution" is to turn off the update checking so that people aren't hassled by useless update notifications, but then this means Windows desktops will gradually fall further and further out of date, opening them up to attack by malware that exploits unpatched bugs in older Java versions.
    The proper solution that I really want, is for Java to be capable of auto-update and self-install without any user interaction or privilege elevation at all. However so far I have not found a solution for this.
    A hack may be possible using Windows group policy, the Windows Server task scheduler, and a java website screenscraper.
    Nightly:
    * Screenscrape Java.com for a newer client version
    * If new one is found, download, put in global read-access share
    * Using a database of machines known to be running Java, flag each candidate that's using an older version
    * Wake-on-LAN the machines needing the update
    * Schedule a remote install of the update with Administrative privileges
    * If update successful, clear flag for that machine in central database
    * shut down again for the night.
    OR
    Java programmers could implement an auto-install mechanism of their own, that can run by itself without user interaction at system startup, shutdown, or on a timed schedule set by the administrator through registry entries (and therefore configurable via group policy applied to desktops).
    ==========
    How are other network administrators handling managed business desktops that need periodic, automatic, and non-interactive Java updates?

    We use Altiris Software Delivery solution to deploy our Java updates but you could also use similar solutions such as Microsoft System Center Configuration Manager.
    The problem is that these are both options that cost money and require investment and training.
    Altiris allows you to create a collection based on the text string held in the Add/Remove Programs list (as well as other fields) - so you can easily create a collection of computers that do not have the required version of Java.
    You can then create a software delivery task to silently install Java with admin rights and target it towards the collection that needs updating.
    The collection updates dynamically. As the computers get Java they drop out of the collection and are no longer targetted for upgrade. This used to work well for me - as I could update about 500 machines in about 2-3 days.
    The problem is that the Java installer doesn't work consistently as you mentioned since JRE 6u25 - the installer doesn't always behave as expected and the switches to do silent installs keep changing. You also have a problem if you try to update Java and the person has their web browser open... Yes, I do my updates during working hours as well.
    In a constantly changing environment in terms of security - you'd think Oracle would have sorted the deployment options out by now?

  • Can't open mail after installing update with 10.6.8 says my mail is out of date

    Please help - new to Macs and I installed automatic update of 10.6.8 - 4 days ago and now I can't open up mail  - it says "You can't use this version of Mail with this version of Mac OS X. You tried to open Mail version 4.5 (1084/1085) in Applications/ Mail.
    So I went to  Applications, says this message again. So I   used my discs that  came with the computer adn installed again  Applications - no luck.
    I had luckily  backed up 2 days before this update - so went to Time Machine - did restore - now good still - can't  open mail. CLick on Iconand get same messgae .
    Please help. Thank you

    rainbowmum wrote:
    Thank you for the very clear basic instructions—helpful for a newbie.…Also my first screen shot !! I see that it does not have .App next to it
    Most likely because you have Finder's preferences->Advanced->Show all filename extensions unchecked. Check it, log out, and back in and all the apps should display the .app extension.
    Now, back to your problem. If you installed the Security Update 2012-004, it failed to update Mail to 4.6; thus, your problem. Manually DL it from http://support.apple.com/kb/DL1586 and reinstall it.

  • How to properly install updates with kernel changes on MBP w/ SSD

    I downloaded and installed Yosemite security update 2015 003, and on reboot it would have a progress bar of the updating which would not complete and would show the prohibited sign (circle with a line through it).
    I tried the following:
    I held the power button to shut it down and perform a hard restart, the problem would not go away.
    Tried clearing the PRAM, but since it was in the middle of the update reboot, it was busy and would not properly clear the PRAM. No chimes.
    I tried holding option to select the boot drive manually, but that did not work either.  I could not even get to the boot drive selection screen. Just the continued seeing prohibited sign.
    I was able to plug in my external hard drive and boot from that after multiple tries to use Disk Utility to restore my backup partition onto the internal SSD. Luckily, I frequently backup, so I didn't lose any data by being forced to wipe my SSD and restore my backup.
    This is on a 13" MBP 7,1 (Mid 2010) with an aftermarket Intel SSD and 8GB of aftermarket RAM. Had TRIM enabler installed and on when downloading and installing the update. Is that the cause? After researching this and coming up with no solution, I discovered this security update seems to change the kernel. Is this kernel change conflicting with TRIM enabler? What causes this hanging problem when attempting to update? I have done multiple "Computer must restart to install changes" updates on this SSD in the past without this problem happening.

    I don't know enough to explain it. I've read that you need to disable TRIM before upgrading to Yosemite. And disable it before doing updates. Updating may not always cause problems, but you never know till it happens. Enabling TRIM disables Apple's security measures built in and this may be why a Security Update affected it.
    Here is one article on TRIM with Yosemite:
    https://www.cindori.org/trim-enabler-and-yosemite/

  • My MBP  won't install anything. This is a recent occurence, previously it has installed updates with no problems.

    Whether its an update from Apple or software to use a hard drive. It gets most of the way there and finishes with 'installation has failed'. Are there any scans I can do to try work out why this is occurring?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ install.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • In LR5, the slideshow does not update with new photos taken by a tethered camera

    Hi Everyone,
    I'm just trying out LR5 and have found a problem - I've watched vidoes where in LR4 you can setup a slideshow to play from a folder, and while the slideshow is playing you can take new photos from a tethered camera and it will automatically add it to the slideshow.
    In LR5, on my computer (Mac), the incoming photo seems to get stuck and does not make it into the slideshow. I have to stop the slideshow, and restart it to see the new incoming photo taken by tethered camera. I need this function for an event, so I'm just wondering whether I'm doing something wrong, or whether it is a bug in LR5?
    Note: I've selected the mode "Use: All Filmstrip Photos". What I've observed is that while playing the slideshow without going fuill screen, a newly taken photo from the tethered camera appears as a white tile, but then the thumbnail contents do not change. When I stop the slideshow, the photo then gets "Developed" and then it will be in the slideshow the next time I play it.
    Thanks,
    Jason

    I have an update - I downloaded LR4 and what I wanted to do above works!
    So I think there is a bug with LR5.
    I'm new to Lightroom - this would be a barrier to me buying LR5. Might have to buy LR4 beforehand...

  • Any soltuions yet....In LR5, the slideshow does not update with new photos taken by a tethered camera

    I have read a number of issues with LR5 not including new images to a running slideshow.  The images load into the filmstrip, but never make it into the slideshow.  Has a solution arrived for this bug?
    Thanks,
    Cnoel

    I have an update - I downloaded LR4 and what I wanted to do above works!
    So I think there is a bug with LR5.
    I'm new to Lightroom - this would be a barrier to me buying LR5. Might have to buy LR4 beforehand...

  • Why does install/update require a restart?

    Could someone please enlighten/edify me as to why it is that updating Safari requires the machine to restart?

    Welcome to the forums!
    Because it includes components, like Webkit, that are also relied on by other applications in the system.

  • Multiclip editing does not update Canvas window with active angle

    Hi,
    I am trying to do some multiclip editing but for some reason when cutting between angles the canvas viewer does not update with the video. Once I stop playback the cuts are all created properly and the video changes when playing back again. However, when editing the video does not change to the active angle. The audio changes but the video does not.
    I have the multiclip playback setting in RT enabled and the canvas and viewer windows synced and matching each other when playing back, and video + audio is set in the sync menu.
    I'm now stuck! and would greatly appreciate some help.
    Thanks
    Phil

    Welcome to the family.
    I don't mean to brush you off because I understand your frustration. But what we know about mutliclip is that it really does work, if you follow the rules completely. We also know that most of the "multiclip doesn't work" posts are resolved by encouraging the user to be objective and to simply recheck the setup steps in the manual, one at a time. (Editorially speaking: There are too many of them, there are too many stupid gotchas in the multiclip setup. True. Hope springs eternal that FCP6 may fix many of these things. It should be a one-click solution.)
    You can search for multiclip here and, after filtering out the nonsense from elitists like me, you should be able to detect something in your configuration that might be keeping you from getting the performance you are expecting.
    bogiesan

  • Offline updates won't install any updates with none in the name (outlfltr-x-none.cab, word-x-none.cab, outlook-x-none.cab )

    First, I'm running SCCM 2007 sp2 R3 integrated with MDT 2012 update 1 build 6.1.2373.0
    I've added the MDT task sequence step: install offline updates, in my OSD W7 task sequence.
    The ZTIPatches.log shows it runs without errors. But only some of the updates get installed.
    It expands all my updates:
    About to run command: expand "\\servername\lsdp$\SMSPKG\CO10021D\95508244-d070-43f4-b304-3efbd62090cd\word-x-none.cab" -F:update.mum "C:\_SMSTaskSequence\ZTIPatches.tmp" ZTIPatches 5/1/2014
    2:37:36 PM 0 (0x0000)
    Return code from command = 0
    But only the updates with a kb number like: windows6.1-kb2936068-x86.cab get the next line:   
    Create Package Item : Package_for_KB2936068
    They also get a, copying package line, a copy file line and a package added line. The others don't.
    I've read that the offline updates will only install updates with file content .cab?
    So I've removed all the exe updates.
    Is this normal for MDT offline updates?

    Offline updates will only inject Windows CBS-based updates into an image. This does not include Office updates.
    Jason | http://blog.configmgrftw.com

  • When in album view it does not update to the next track.

    It's still on an album that I played weeks ago.
    Can Iget it to update with each new track?
    Thanks.

    I am not sure however I suspect live view is for viewing the page you are working on. You would have to open the other page to see it in live view. The browser on the other hand is doing what it is designed to do. I jump back and forth all the time from live view to the browsers I have installed.

  • Are admin and office clients always updated for each service pack.

    Hi,
    I am investigating upgrading our BPC version from 7.0 SP3.   The question I have been asked by my business clients is "do the admin and office clients of BPC always get updated with each service pack?"  I assume they do because the install guide indicates that you must update them to the same version as the server.  Upgrading the client versions is always a concern here because since we don't allow the automatic update our plans have to include packaging an SMS deployment to over 500 workstations of several different configurations and locations.

    Hi,
    Yes, there are changes in the clients in every service pack. This is why it's important that the version of the client matches the version on the server. We've seen issues where there was a mismatch and no one could log in because of the changes in the client.
    I would advise always updating the clients when adding a new service pack.
    Regards,
    Jason

  • Calendar Widget in Notification not updated with shared calendar

    Greetings---I'm on OS X Yosemite 10.10.1 and have a Google Calendar shared with me that I would like to appear in the notification pane. It seems, however, that the Calendar widget in Notifications only updates with events that are local to iCalendar. In other words, it does not update with events that are shared from a .ical file online, like a shared Google Calendar.
    Note that this is different from adding a Google account to settings > internet accounts---I only have the url for a shared calendar that I do not own and cannot modify.

    Rebooted and it all came in !

  • 10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart

    10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart. Anyone can help

    Ok will check, as of right now I have 82.57gb free, that's plenty of space will check the disk though using disk utility. Also I am now downloading the update from the apple website instead of going through software update

Maybe you are looking for