ARD over internet to multiple macs using the same connection

Hi, I know the topic has been covered to enable ARD over the net, however all the solutions I see require port forwarding which in essence makes only one computer using the internet connection available, how do you make it so multiple macs can use the one internet connection to send/receive ARD requests? is there a way to change the port ARD uses on individual macs and then forward the ports ? or do I have to go down the VPN path ? or is there a better solution for this kind of setup, thanks Ash

Precisely.
Cheers, Joel
\[ Note, the reason I didn't use 5900 and 5901 was for clarity to make it obvious that they are arbitrary choices on the external side, but also because sometimes using 5901+ gets confusing. Depending on your VNC server software, which port on the internal side that you choose to use between 5900-5920 actually means something (resolution, color depth, etc) to the server software. If you can keep it all straight in your head though, and point them all to the right internal port (5900 usually), no harm in it. If you don't mind adding some awful "security through obscurity," you probably shouldn't have VNC service open to the internet on 5900 anyway. Either way, you should also probably limit connections to those internal machines now that they are "directly reachable" from the 'net. In your firewall they should both have default-deny policies for incoming requests unless they're from your known-safe external addresses.]
Message was edited by: Joel D. Reid

Similar Messages

  • Multiple Macs using the same external drive

    I have two MBP's and am trying to get the new laptop to see the libraries on the external drive. Is there any way to get the new laptop/itunes to see the existing files?

    I just checked mine and I cannot access all the other users' accounts.

  • Can i back up multiple macs to the same hard drive

    can i back up multiple macs to the same hard drive

    Yes, you simply share the drive to the network.. in whatever way that is possible as you have given us no info.. over the network TM will create sparsebundles.. locally it can produce a straight backup ..
    http://code.stephenmorley.org/articles/time-machine-on-a-network-drive/

  • How do you take off reseiving messages on multiple devices using the same apple account

    How do you take off reseiving messages on multiple devices using the same apple account?

    Go to Settings>Messages>Send and Receive on all but one device and add a unique email address on each device and delete the commone Apple ID email device
    If there is also an iPhone with iOS 6 associated with the Apple ID, uncheck the phone number on all but the phone.

  • Load multiple files using the same data load location

    has anybody tried loading multiple files using the same load locations. I need to do this as the data in these multiple files will need to be exported from FDM as a single export file. the problem i am facing is more user related. since these files will be received at different points of time, users will need a way to tell them what has been loaded and what is yet to be loaded.
    is it possible to throw a window on the web broser with OK and Cancel buttons from an event script?
    any pointers to possible solutions will be helpful

    was able to resolve this. the implementation method is as follows
    take a back up of previously imported data in the befcleardata event script. then in the beffileimport event append the data to the import file. there are many other intricacies but this is the broad implementation logic. it allowed my users to load multiple files without worrying about append or replace import type choices

  • HT204053 Can multiple people use the same Apple ID for their own devices?

    Can multiple people use the same Apple ID for their own devices? I just set up my IPhone 4S (first time user) using the same Apple ID as my daughters and now we receive each others texts, do I need to set up my own Apple ID account?

    Yes, you can.  In fact it's recommended that you use different IDs for iMessage, FaceTime and iCloud.  You can still share the same ID for iTunes without any issues.
    You are getting each other's text messages because you're using the same ID for iMessage.  To fix this, one of you should go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign in with a different ID.  To avoid getting each other's FaceTime calls, do the same thing in Settings>FaceTime.

  • What is the best way to manage multiple ipods using the same itunes?

    Hi Everyone
    i am trying to manage three different ipods through the one Itunes, all with very different tastes, not sure if I am doing it the best or easiest way so does anybody have a simple solution on what you're supposed to do, to keep it all simple!
    Cheers
    Liv

    If you have created a new Windows user account you need to log out and then log back in with your original user name. By default each Windows profile will have an independent iTunes library.
    If instead you managed to create a new library within the same profile. click the icon to start iTunes and immediately press and hold down the shift key, keep holding until asked to create or choose a library. Click Choose and navigte back to your original which should be at <User's Music>\iTunes.
    Your question as posed was:
    What is the best way to manage multiple iPods using the same iTunes {library}?
    in which case Selected Playlists is probably the best approach. Simply create a playlist for each device, Alice's iPod, Bob's iPhone etc. and sync the device with the appropriate list.
    tt2

  • How would I go about adding multiple rectangles using the same lines of code?

    How would I go about adding multiple rectangles using the same lines of code? I would prefer to just run through a set of code every time I need a polygon. If I just have to create multiple polygon adding statements that's fine but I'd prefer just 1.

    >>How would I go about adding multiple rectangles using the same lines of code?
    You could create a method that creates and returns x number of Rectangle elements:
    public IEnumerable<Rectangle> CreateRectangles(int numberOfRectsToCreate)
    for (int i = 0; i < numberOfRectsToCreate; ++i)
    Rectangle rect = new Rectangle();
    rect.Fill = Brushes.Blue;
    rect.Width = 100;
    rect.Height = 100;
    yield return rect;
    ..and then call this method from anywhere in your code:
    IEnumerable<Rectangle> rects = CreateRectangles(5);
    foreach (Rectangle rect in rects)
    //add to StackPanel or do whatever with the Rectangle elements:
    yourStackPanel.Children.Add(rect);
    >>If I just have to create multiple polygon adding statements that's fine but I'd prefer just 1.
    When adding Point objects to a Polygon you can only add one per call to the Add method but you could call the Add method inside a loop, e.g:
    for(int i = 0; i < 10; ++i)
    //add to StackPanel or do whatever with the Rectangle elements:
    Polygon p = new Polygon();
    p.Points.Add(new Point());
    Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. Please don't post several questions in the same thread.

  • Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts..

    Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts...
    Rp

    1. in physical connections part can i use the same work schema
    2. Can i use same contexts created or do i need to create everything as new and then try?
    Thanks,
    Rp.
    Hi,
    As you mentioned that you just upgraded the database, so the data is same and schema is same you can connect with the same work schema.
    Yes, you can use the same contexts , but need to do Reverse Engineering for your new database.
    And about data server, i think you also have no need to create new data server, if hostname,sid and port etc are same as these were with R11(consult with your DBAs regarding it)

  • Contribute multiple instances of the same connection appear on login/start screen

    I am administering a series of sub-websites under one primary umbrella.
    - The Primary Umbrella site does not run under the Contribute Publishing Server
    - The secondary (child) sites are managed by the Contribute Publishing Server
    - We recently added a user to several of these subsites
    - After we added the user, we've had a problem with other user profiles.
    - Multiple instances of the same connection will appear upon login on the start screen ( about:startscreen ). However the user seems to only be able to credential to one of them, not both.
    I have gone into the user profile directory within Windows directory structure and removed both site dirs. However when restarting and reconnecting, both appear again.
    Anyone else have this issue and what is the remedy and fix?

    I tried to add a screenshot, however it would not let me upload.
    I get: An error occurred while trying to submit your post. Please try again.

  • Sync iTunes Win(Bootcamp)/Mac using the SAME Library

    I know this question has ben asked a lot, but most of these questions are dealing with multiple physical units.
    I have a Mac Pro Quad Core that is running Win7 under Bootcamp. Therefore, I am using the same hardware for both operating systems.
    I have my iTunes Library (the whole Library, not just music files) pointing to a separate, internal drive. Both the Mac and Windows version of iTunes point to the same iTunes Library on the same drive. The Windows version of iTunes has Library organization turned off (mostly because the external drive is HFS+ and Windows gets cranky with that). To be clear: my iTunes Library lives on a drive that is not my boot drive and is not in my User Account directory.
    I am using the Mac OS iTunes to manage, maintain and organize the Library. The PC version of iTunes is strictly used as a jukebox. There is no cross contamination of OSes as far as file acquisition. I even sync my iPhone solely on the Mac side.
    For those unfamiliar with Bootcamp, the technology pushes me into either a Mac state or a PC state, I am not running the OSes concurrently.
    What I would like is to have whatever file management I do Mac-side be reflected PC side without me having to re-import the Library every time I make a change.
    Currently, if I add music on the Mac-side, or if I add comments, or anything else carried in the metadata, the changes will not reflect PC-side. I have to reimport the Library, which wipes my ratings and play count and is very annoying.
    I would like to know if it is possible to set up the PC version of iTunes to simply update the Library automatically, so that any change I make on the Mac-side is already reflected in the Windows version. For instance, I manage my play lists by comments - so I have "AOR Classic Rock" as a comment entry. If I add this comment to 10 songs on my Mac, I would like the Windows version of iTunes to just have "AOR Classic Rock" in the comments without me having to reimport the songs that changed.
    I do not expect reciprocity, since I don't believe Windows iTunes can change files on a Mac formatted drive, but that's okay. I just want the changes I make on the Mac to sync to the PC.
    You would THINK that having iCoud, I could use iCloud to sync all my iTunes settings and my Windows iTunes would mirror my Mac iTunes (at least for playlist, count and ratings). I do not have iTunes Match and am debating if its worth the cost. If iTunes Match will create the sync scenario I am looking for, it may very well be worth it.
    Any suggestions would be greatly appreciated.

    You'll need to install the appropriate drivers, and possibly move the library to a disk in a different format, so that each operating system can read and write to the drive. Then there is no reason why you can't open the "same" library in either system, and thus it will always be up to date. Moving back & forth between the OSs should be no more difficult than opening the same library on an external drive on a number of different systems. Provided all the content is in a standard layout, media folder inside the iTunes library folder, it should just work.
    tt2

  • Can multiple accounts use the same purchased apps from the same computer?

    Hope one of you guys can help me out!
    Ive got an iTunes account with over 1300 app store apps, most of which are paid, my kids have just got an iPhone4 and an iPod Touch4 for xmas presents and Im currently setting them up for them to use straight away on xmas day.
    The issue is;
    For them to be able to use all my apps on their devices Ive had to use my account, this causes issues with things like GameCentre and FaceTime, because we are all on the same e-mail address and account!!!
    Is there any way for me to set up there own accounts in such a way as they can still have access to my apps?????
    Please help if you can, it would be greatly appreciated,
    Thanks, James

    Akhilleus70 wrote:
    How do I authorise them all to use the same apps etc?
    that's basically very easy. all you have to do is +log out+ of one account (click on the account name in the Store window and select +sign out+ from the pop-up dialog) and into the other, and then they will both be authorized.
    JGG

  • How can I see up AppStore/Software Updates for multiple computers using the same account?

    I have several computers in my household which all use the same App Store account for purchases & software updates. How can I view all those installs while not being in front of all computers?
    Recently an iMac crashed from a software update. I want to see what installed & crashed it.

    Launch the Mac app store on the computer you want to update.
    To use your Apple ID at the Mac App Store
    Choose Store > Sign In from the App Store menu.
    Enter your Apple ID and password, then click Sign In.
    Then redownload Lion.

  • Multiple users, using the same web app items?

    Iam building a service for familes were the parents should be able to read / add / edit the same secure web app items.
    So when logged in the user have access to the same user submitted web app items.
    I found a thread answerd by Liam and my guess this is not possible? Can it be partial be done e.g. just let the "family" read the familys items? And no there is not possible to add / pair the users in backend because there are to many.
    Any tip where to look? I have tried to use the "uniqe ID, datasource, unique template" method but do you "wizards" :-) think that's the way to go?
    This thread suggest it's not doable.
    http://forums.adobe.com/message/5547102
    Thanks!
    //Johan
    Formpartner

    Not in association Johan no.
    You can have one "Family" login they all use to log in but it will kick one out if the other logs in and of course, multiple people sharing the same login increases the security risk.
    You can only set one owner as well.

  • Multiple users using the same templates?

    The place I work puts out a weekly TV show and we regularly use the same lower thirds for various titles that come up throughout the show. After opening them up in Motion 3 I saved the titles as templates, which is great because now I can do all the work in FCP rather than Motion.
    However, the templates are saved to my user on the local HD. We have multiple editors that work on multiple computers.
    Is there a way to make the templates available on all computers to all users?
    Any suggestions is appreciated.
    jesse.

    Too, here's one more roadblock to (hypothetically) consider.
    Even if what we've discussed happened to work, there would be one more issue: network bandwidth. When you add one of these "Master Templates" to a FCP timeline, then drag it to the browser, then right-click and select "Reveal in Finder", it points straight to the Templates folder that I alluded to earlier. Locally.
    So if this template lived in one central place then, potentially, all editors could be trying to access it, in real-time, remotely, simultaneously. I think this would wreak havoc quickly. Unless of course you're employing a SAN. Now we're talking about a whole new beast. (Unless you've got a SAN already. ;))
    Bottom line is you're going to distribute templates to all editors individually. Unless you're developing new templates all the time, then this shouldn't be too much of a chore. Just out of curiosity, how many editors will this be deployed to?

Maybe you are looking for