Are all changes for a class documented?

Between versions. For example, I was looking at the Serializable interface and it's "since Java 1.1". But does it function the same as in Java 1.1? The documentation doesn't say that anything's new since Java 1.1, but would it if it did change?

Changes may or may not be documented. Usually if a method is added to a an existing class, the method documentation will say "since X.Y" and if a class is added to an existing package the class description will say "since X.Y," but other changes may be undocumented.
For instance the method java.awt.Point.getX() used to return int in 1.1, but in 1.2 the return type was changed to double. The API specification does not mention this fact.

Similar Messages

My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion

My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion... Help!!!
Several problems with Mountain Lion, APP STORE (login/logout error), WIFI(802.11n for 802.11g), MAIL (horrible)... Apple, what is happening?

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

ODI CDC using Logminer - how to capture all changes for one PK

Hi,
Let me explain our scenario and challenges we are facing -
*1. Captures all changes in CDC –*
We are using CDC (LOGMINER) to capture change. Currently current ODI code capture latest change happened during last execution.
Now requirement is to capture all changes happened after last execution cycle.
To achieve this, can you please suggest what changes we need to do in current code.
*2. Performance Improvement* - Current CDC can handle 400 TPS (Transactions per second, here transactions means single record) and we are looking for 2000 TPS
we are expecting 15 million records for INIT load and 7-8 million records on daily basis for CDC
What needs to be done to improve the performance. In case if you need more details to answer this, please let me know.
Oracle database version at source and target - 11g
ODI - 11g
Thanks in advance.
Regards,
Dinesh.

Hi Dinesh,
I have some experience with ODI And Logminer / Streams.
Can you confirm what JKM you are using?.
For your 1st point - the logic to only get the latest update is contained within the JV$ / JV$D view , you can edit the definitions of these views if you want to bring through all transactions - there should be an SCN number in the change table you can order by if you are interested in the order the transactions occurred - I assume you are otherwise your target DB will get out of sync.
As for performance - Have you tweaked the Streams settings ? How many Change sets do you have ?

I have tried to update 6 apps. But they are all frozen for a day now I could delete them and reinstall but one is no zombies allowed and I don't want to lose content, can anyone help?

I have tried to update 6 apps but they are all frozen .
They either say loading or installing but are doing nothing. I would delete them and try to reinstall, but one is no zombies allowed and i don't want to lose the game I. Have built up, can any one help a novice???

Due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended. Firefox 3.6.18 would be the safer choice.
Here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 5.
You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.

Font and font color are getting changed for SAP R/3 report in portal

Hai,
We are using ITS 6.2 patch 26 and EP 6.0.
When i run a SAP R/3 4.6C report in ITS 6.2, the report content are shown in Courier New font with blue color.
When i run the same report from portal, the report content are shown in Arial font with blackish blue color.
Can anyone tell why in portal the font attributes are getting changed and how to have the same font attributes in portal also.
Regards,
H.K.Hayath Basha.

Hi
Please go to System Administration -> Portal Display -> Themes.
You can change the font type , color and size from here and have to properly assign it to the Desktop for the users for which these font should be displayed .
Please check the following links :
http://help.sap.com/saphelp_nw04/helpdata/en/26/3df46c0584cd4eb31e91aa7bcf1893/frameset.htm
Edited by: purav mehta on Dec 16, 2007 6:01 PM

When i transfer my photo to pc, they are all rotated for 180 degrees

Well,just like it says. I was trying to backup my photos to my hard disk to free up my phone space. But all photo are rotated for 180 degrees on my pc. It is immposible to watch those on pc. Did i do something wrong?

And why is not possible to import photos to phone in same way like exporting them??
<Edited By Host>

Here Transit buses are all wrong for the location ...

I'm using a Nokia Lumia 620
Here Transit app is showing all the wrong buses for locations.
When I search nearby it shows the name of the roads and a list of the correct buses but when you click on your destination to show departures it lists buses that are running miles away from your location.
see photos attached,
I have unistalled the app and re installed it but it still shows the wrong buses
Solved!
Go to Solution.
Attachments:
wp_ss_20130903_0002.png ‏226 KB
wp_ss_20130903_0001.png ‏59 KB

I have now received the Amber update and Here Transit app is working correctly now

All source codes of jmf documentation are missing ?

Hello,
I'am learnig jmf by reading the jmf documentation in the oracle website.
But all source codes in jmf documentation are missing because the website is oracle, and not sun.
For example, in this page http://www.oracle.com/technetwork/java/javase/documentation/swingjmf-176877.html ,
the link of MDIApp.java source code is broken ( http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/MDIApp.java ).
So where are all source code of jmf documentation ?
Thank you.

Hi,
I am trying to learn Java Media Frame work and am looking for the source to MDIApp.java.
The link is broken.
Please can you guys post the source code.
Thanks

Turn off all the areas of valuation for AuC

Dear experts, I have been problematic in the valuation adjustment for inflation for the kind of AuC. Require support to understand the possible consequences if you turn off all the areas of valuation for this class of assets in particular.
I appreciate the help you can give me
Best regards

The fiscal area (02).
The customer doesn't use this area to valuate the assets, however this area was activated in the implatation.
I hope you can help me
Best regard
Neida

Control Flow task colors are not changing in SSIS

Hi,
When I am running my SSIS package colors of "Control Flow" task are not changing from Yellow to Green or Yellow to Red however when I double click on dataflow task I found that colors are getting change for the components available inside dataflow
task. This mean only colors of my control flow task are not changing.
Can anyone help me with this issue. Because of this issue I am not able to find out whether any of my control flow task is running successfully or not espicially in case of "Execute SQL Task"
Thanks

Related thread:
http://stackoverflow.com/questions/9473121/yellow-on-the-control-flow-no-color-within-the-data-flow-whats-going-on
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Use for CCD classes?

I am a new 6th grade CCD teacher and am wondering if there are iPad resources for CCD classes.

We can't know which parts of CCD you consider to be doctrinal. Consult your local religious representative.

Is there a possiblity that the add-ons i find on firefox's website contain viruses(Steal personal information etc)?Are all of them safe?

Is it true that some add-ons might not be safe?

No, they are all inspected for viruses, keyloggers, etc.

How to find out what are all the change pointers assoicated for an idoc ??

Hi ,
How to find out what are all the change pointers activated for an idoc ??
Thanks,
Varma

Verma,
You can check what are the active Change Pointers for the message type in tcode <b>BD50</b>
Use tcode <b>BD61</b> to check whether change pointers are active or not??
Hope this helps..

I am trying to change the order of one of my audiobooks (media kind: audiobook), but the ID tags are greyed out. I can't change tags for almost all my audiobooks. Music files OK. Files are all read/write. Repaired disc perms. OS 10.9.4. ITunes11.4

I am trying to change the order of one of my audiobooks (media kind: audiobook), but the ID tags are greyed out. I can't change tags for almost all my audiobooks. Music files OK. Files are all read/write. Repaired disc perms. OS 10.9.4. ITunes 11.4 I don't have iTunes Match.

Select all the songs and then Advanced -> Convert ID3 tags.
http://docs.info.apple.com/article.html?path=iTunesWin/6.0/en/655win.html

Hi all ,i need a good documentation for a beginner in WORK FLOW ?

hi all ,
i need a good documentation for a beginner in WORK FLOW ?
please,try to send the attached documents as much as u can apart from giving the weblinks ?
hope you will send it soon ....
thanks & regards
vishnuvardhan k.v.

Hi
Developing a simple application using steps "User Decision" and "Mail"
Basic terminology used in the workflow:
The workflow definition is the set of rules that determine the path that the process takes. For example, how a purchase requisition is processed, from the initial request to the creation of the purchase order
A Workflow Instance, which is often simply referred to as the workflow, is a single workflow run. For example, the processing of a single purchase requisition for computers.
The Tasks are the steps in the process, which have to be performed either by people or automatically by the software. For example, to check for the availability of the spare computers in the company.
A Work item is the task instance that is performed as a single workflow step. For example, check that there are no spare computers available in the company.
Agents are the people who process the tasks (via the work items). For example, requisitioner and a member of the purchasing department.
Container is the place where all the data used in the workflow is collected.
Binding is the set of rules that define which data is passed to which part of the process.
Building a simple workflow application
The central tool for creating, displaying and processing a workflow is the workflow builder (Transaction SWDD). Within the workflow builder you can create all components of a workflow, including all the containers you need for getting the data from one step to another.
Generally, most of the workflows are started by an event (for example, when a material is created or when a new purchase requisition arrives). You define which data from this event needs to be passed to the workflow via binding.
However you can also start any workflow directly. Let us create a simple workflow and start the workflow directly, using the testing tools.
Call transaction SWDD. When the workflow builder is called for the first time, a newly created initial workflow definition appears or else last created workflow appears. In such cases you can opt to create a new workflow by pressing Create New Workflow(ctrl + shft + F5). The following screen appears.
The initial workflow screen has the following parts:
a. The start of the workflow definition, indicated by .
b. The end of the workflow definition, indicated by .
c. The area in which you insert the new workflow definition is indicated by .
Now select the undefined step and select Create step or double click the undefined step. Now among the different steps chose the User Decision by double clicking on it.
Developing a simple application using steps "User Decision" and "Mail"
Previous
Now enter the title for the user decision Please make a decision. Also enter the decision texts as Approve and Reject. On pressing enter, the outcome values default to the Decision texts but you can specify your own names, if desired. Now we need to select the agent. Agent is the person to whom the work item needs to be sent.. Since this is just a beginning, we would hardcode the user name. Select the User from the drop down list and enter the user name to whom the work item needs to be sent. In general, this type of agent assignment is not done. Agents are generally assigned using the expression, agent assignment rule or organization object (job, position etc.).
Now select Transfer and to graphic button. Following screen appears:
Now we need to include a mail step to be sent to the requestor. Now select the line Approve and do a right click. Different options on shown on the context menu. Select Create.
Now select the step Send Mail from the list.
Developing a simple application using steps "User Decision" and "Mail"
...Previous
Now enter the subject and the body of the message for the mail to be sent.
Do not change the recipients. Our mail is intended for the persons who triggered this workflow. &_WF_INITIATOR& contains the value who executed the workflow. Since this is a test object, we are using &_WF_INITIATOR&. But we wouldnt be using this variable in real time scenarios. We would discuss about this in the coming documents.
Now select Transfer and to graphic button.
A popup appears requesting for the abbreviation and the name for this task. Enter the same and press enter.
Now enter the package as local object and press enter.
Follow the steps 5 through 9 for the step Reject. The following screen appears:
Press SAVE to save the workflow application. You need to enter an abbreviation and name for your workflow as shown below. You can change any of these at any later point. After saving, a number is assigned to your workflow starting with WS, as shown below.
Developing a simple application using steps "User Decision" and "Mail"
...Previous
To execute the workflow, activate it by choosing the activate button.
Test the workflow by choosing Test. The following screen appears.
Now choose Execute to start the workflow.
Now the recipient would receive a work item in his SAP® inbox (Transaction SBWP).
Now execute the work item by pressing Execute. The following screen appears:
Choose one among Approve or Reject as part of the user decision. He can select the third option to retain the work item in his inbox and make the decision later. Now suppose that the recipient has chosen one of the first options. Now a mail would be sent to the requestor with the status of his request.
Creating a Container element
This document details about creation of a container element in workflow and using it in the step "Mail".
Pre-requisites:
It is assumed that the reader of this Tutorial is aware of creating a workflow definition with the step Mail. If not, please go through the document on creating the same available, by clicking here.
Steps:
1. Create a workflow definition using the transaction SWDD.
2. Lets create a container element for Carrier id. Click on the Workflow Container on the left side of the screen (as shown in the screenshot below):
3. Now double-click on Double-Click to Create
4. Enter the details pertaining to CARRID here.
5. Click on tab Properties and select Import.
6. Click on Confirm (Enter).
7. Now the element created could be seen on the left side, below the Workflow Container.
Creating a Container element
Previous
1. Create a Mail step by double-clicking on Undefined step in the workflow.
2. Enter the recipient details in the Recipients box.
3. In the subject line, enter Carrid value entered is: and click on Insert Expression.
4. Select the element Carrid from the list.
5. Similarly enter the content in the Body area.
6. Save and activate the application.
Testing the Workflow application:
7. Test the workflow by clicking F8.
8. Enter the value of the Carrid as shown above and press execute.
9. A mail would be sent to the recipient mentioned earlier with the carrid value entered.
Condition Step
Agenda:
This document details about the steps Condition.
Pre-requisites: It is assumed that the reader of this document has a preliminary understanding of workflow and has worked with the container elements earlier. If not, please go through the first two Tutorials of workflow available in this site. (More details)
Procedure:
1. Create a new workflow definition.
2. Create a container element, CARRID (as demonstrated in tutorial 2).
3. Now click on undefined step and create the step Condition.
4. Enter the step name of your choice.
5. We would have the following condition here:
If carrid = AA.
Do this.
Else.
Do this.
Click on Click here to create a new condition. Following screen appears.
Double click on Carrid. Next click on = and enter the value AA in the constant field and press ENTER.
Enter the outcome names of your choice as shown above.
Click on Transfer and go to graphic.
As shown above, there are two branches here. One navigates to true, if CARRID = AA else the control takes the branch False.
Test the above scenario by inserting mail steps in the above 2 branches and by passing different CARRID values.
Condition Step
Agenda:
This document details about the steps Multiple Condition.
Pre-requisites: It is assumed that the reader of this document has a preliminary understanding of workflow and has worked with the container elements earlier. If not, please go through the first two Tutorials of workflow available in this site. (More details)
Procedure:
1. Create a new workflow definition.
2. Create a container element, CARRID (as demonstrated in tutorial 2).
3. Now click on undefined step and create the step Multiple Condition.
4. Enter the step name of your choice.
5. We would have the following condition here:
If carrid = AA.
Do this.
Elseif carrid = AH
DO this.
Elseif carrid = SQ
Do this.
Else.
Do this.
Select the CARRID using the F4 help for the comparison basis field.
Enter the values of the carrid under the Comparison values with the corresponding outcome name (of your choice)
Double click on Carrid. Next click on = and enter the value AA in the constant field and press ENTER.
Click on Transfer and go to graphic.
As observed above, there are different branches for each value of CARRID mentioned above.
Test the above scenario by inserting mail steps in all the branches and by passing different CARRID values.
Using "Container Operation" step
Agenda: Usage of step Container Operation.
Pre-requisites: It is assumed that the reader of this tutorial has worked in the concepts that are dealt in earlier tutorials. (click here for more details)
Scenario: In this tutorial, we would deal about how to work with the step Container Operation with an example of calculating the available seats by subtracting occupied seats from the maximum seats at the workflow level.
Procedure:
1. Create a new workflow definition using the transaction SWDD.
2. Create two container elements MaxSeats, Occ_Seats with the import property set. You can use the reference fields sflight-seatsmax, sflight-seatsocc for this.
3. Create another container element AvailableSeats without setting either import or export property as this is calculated within the workflow and used within the workflow. You might use any of the above reference fields as data types.
4. Define a new step Container Operation in the workflow definition by double-clicking on the Undefined step.
5. In this step, we would calculate the available seats from the max seats and seats occupied.
I would recommend entering all the container elements from the F4 help instead of typing them manually.
6. Return to the main screen.
7. Create a mail step after this to send the available seats information.
8. Test the above functionality by passing some values to the maximum and the seats occupied.
9. Result would be as follows:
Triggering Events Programmatically
Purpose: This document details the procedure in triggering the business object events programmatically.
Pre-requisites: It is assumed that the reader of this document is aware of the business object concepts and good in ABAP.
Procedure:
In this document, we would take an example of the business object BUS1001006 (Material) and the event CREATED. In general, this event is triggered whenever a material is created using a standard procedure like MM01 or any others. Now we would trigger this event from our own programs.
Following are the screenshots of the business object BUS1001006 and the event CREATED. Go to transaction SWO1 for more information of the business object.
Double-clicking on the key field parameter gives you technical information of the field.
In order to trigger an event programmatically, we would use the function module SWE_EVENT_CREATE.
Following is the sample code to trigger the events programmatically:
REPORT ZDEMO_TRIGGER_EVENT.
DATA: KEY LIKE SWEINSTCOU-OBJKEY.
KEY = '1163'. Material Number (hard-coded)
CALL FUNCTION 'SWE_EVENT_CREATE'
EXPORTING
objtype = 'BUS1001006'
objkey = KEY
event = 'CREATED'
CREATOR = ' '
TAKE_WORKITEM_REQUESTER = ' '
START_WITH_DELAY = ' '
START_RECFB_SYNCHRON = ' '
NO_COMMIT_FOR_QUEUE = ' '
DEBUG_FLAG = ' '
NO_LOGGING = ' '
IDENT =
IMPORTING
EVENT_ID =
TABLES
EVENT_CONTAINER =
EXCEPTIONS
OBJTYPE_NOT_FOUND = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
WRITE 'Event Triggered'.
ENDIF.
COMMIT WORK.
In order to test whether the event is getting triggered or not, we can make use of Event Trace. Switch on the event trace using the transaction SWELS.
Press Switch On.
Now execute the program developed earlier. Now switch-off the event trace using the same transaction SWELS.
Now go to transaction SWEL. Here you can list out the events triggered in the particular period of time. Here is the event-trace list:
Deadline Monitoring in SAP Workflow
A major advantage of workflow is the ability to monitor the workflow steps according to a predefined schedule. Following are different deadlines that can be monitored against each workflow step:
Requested Start
Latest Start
Requested End
Latest End
In this example, we will define a deadline to the User Decision example created earlier (click here). Following is the screenshot of the application developed using the User Decision example:
We would extend this example to the deadline monitoring.
In the User Decision step, click on the latest end tab.
By default, No deadline monitoring is active (as seen in the above screenshot).
Choose the Work Item Creation from the list box.
After selecting Work Item Creation, chose an offset of 5 minutes. This means that the work item must be executed within 5 minutes of the creation, if not this would trigger.
Deadline Monitoring in SAP Workflow
Enter recipient details to whom the message to be escalated, if the work item is not executed with in 5 minutes after work item creation.
Save and activate the workflow definition.
Testing the workflow application:
Execute your workflow.
Check for the work item in the SAP Inbox. This time do NOT execute the work item.
Wait for the deadline to be triggered. After that, a deadline message is delivered to the recipient mentioned in the Latest End tab. See the screenshot below.
Dont worry if the deadline message doesnt appear immediately after 5 minutes. This depends on various factors including how the deadline monitoring program is scheduled and also on the availability of the background processors.
Use SWWA to check how the deadline monitoring program is scheduled in program.
For example, assume that our work item has been created at 09:10 hrs and the deadline message is expected to trigger at 09:15 hrs. From the above screenshot, it is understood that the background program is scheduled to execute for every 3 minutes. Assume that the last run of the program is at 09:14hrs and the next run is expected at 09:17hrs. So even our deadline expires at 09:15, the deadline message would appear only at 09:17hrs after execution of the background program.
Some more points
In our above example, we have used the deadline on the Work Item creation time. i.e., 5 minutes after creation time, the deadline message would be sent. Now we would check the other option Expression. Here we can mention the date and time, when the deadline message should appear irrespective of the work item creation date/time.
As seen in the above screenshot, we can provide the target date and time by which the task should be finished. Container elements could be used in this case. Please refer to our example on creation of container elements (click here).
Personal Substitute in Workflow
Requirement: Need to have at least one substitute who can act upon work items in your absence.
Important: The appointed substitute would be able to see all your work items. A substitute cannot be assigned for only particular area of organization or any other item. So need to ensure that the substitute have the necessary authorizations to act upon the work items.
Procedure:
1. Go to SAP Business Work Place (TCode: SBWP)
2. Now from the menu bar, select Settings à Workflow settings à Maintain Substitute
3. Highlight/Select the name on the window, in this case SAPDEV02 and click on Create Substitute.
4. List of users available in the system are displayed.
5. Select the required substitute user name. Following screen appears.
Validity field describes about the period in which the setting would be active. Note that the dates on the screen would range from the current date to 31st Dec 9999.
Regarding the checkbox Substitution active, it is advised to leave this checkbox unchecked for system performance reasons. A check in this box indicates that the substitution is permanent and if left unchecked it is treated as as-needed. A permanent substitute will automatically receive the primary users work items in their own box. In the case of as-needed, substitute must manually adopt the work items from the primary users inbox.
6. Save the entries
7. Click Enter to leave the screen.
Adopting a Substitute in Workflow
If you have been designated as an as-needed substitute, you must manually adopt the substitution. If you are designated as a permanent substitute, the work items would automatically appear in the inbox.
Before adopting a substitution, there are 19 work items in the inbox. See the screenshot below:
To adopt a substitution, select Settings à Workflow settings à adopt substitution.
Select the corresponding User-id (if you have been assigned as a substitute for multiple people, then this option would allow you to select the user name of whom you would to check the work items)
The corresponding users work items would appear in our inbox now.
You can end the substitution, by selecting settings à Workflow settings à End substitution.
Note: Substitutes can only adopt work items that are directly routed to the person for whom they are a substitute. If you are a substitute for a user (SAPDEV02) who has been made a substitute for another user (SAPDEV01), you will only see work items for user SAPDEV02 and not of the user SAPDEV01.
Notification of Work Items via e-Mail
SAP provides us with a facility of notifying the user via the email address of your choice when there are any pending work items in the SAP Inbox..
1. Go to Transaction SO13.
2. Click on Automatic Forwarding tab.
3. Click on Create icon .
4. Enter the details in the above screen.
5. Click ENTER to complete the entries.
6. Now the notification would be received at the provided email address if there are any pending work items in the inbox.
Filtering the Work Items in the SAP Inbox using BADI
This document details about the procedure in filtering some of the work items from the SAP inbox using a BADi.
Following is the screenshot of the SAP inbox, before implementing BADi:
The BADi that is used in filtering the work items is WF_BWP_SELECT_FILTER. To implement the BADi, go to transaction SE18. From the menu, select Implementation à Create. (See the screenshot below)
Enter the implementation name and press ENTER
Enter any meaningful short text for the implementation and click on the tab Interface
The implementing class, ZCL_IM_BWP_SELECT_FILTER, is automatically proposed. Double click on the implementing class name.
You are now navigated to the class builder. Now double-click on the method name shown on the screen (see the snapshot below)
Now let us filter out the work items belonging to the task TS2000066. See the code below:
Activate the method and also the implementation. In the state of active, you wouldnt be able to make any changes. To make any changes, we need to deactivate it and then make the changes.
Now check the inbox and would notice that the work items related to that task are no more appearing.
To notice the differences, try activating and deactivating the BADi implementation.
Workflow tutorials with step-by-step and with screenshots are available at http://www.****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/c14a9b55103116e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
debug a workflow.
This has a step by step procedure :
http://fuller.mit.edu/workflow/debugging.pdf
www.erpgenie.com/sap/workflow/debugging.htm
http://www.erpgenie.com/workflow/debugging.htm?2b5de440

Are all changes for a class documented?

Similar Messages

Maybe you are looking for