Are L2TPv3 endpoints not supported to source from VRFs?

Hi,
I have a customer that needs to tunnel serial data from remote sites to a central site. This serial data is HDLC encapsulated and the remote site has a Cisco 1921 router with HWIC4A/S.
The central router is a Cisco 2951, also with HWIC4A/S.
This customer has several VPNs carried by a service provider through MPLS. One VPN is for operational traffic, one is for test traffic and so on.
They want to send the tunneled traffic through the operational VPN on the router doing tunneling through VRF lite. This does however not seem to be supported but I can't find any restrictions in the Cisco documentation.
Here is a working configuration:
pseudowire-class PW
encapsulation l2tpv3
sequencing transmit
protocol none
ip local interface loopback0
ip tos value 128
ip ttl 10
interface Loopback0
ip address x.x.x.x 255.255.255.255
interface Serial0/0/0
description ### redacted ###
no ip address
no keepalive
ignore dtr
clock rate 19200
no cdp enable
xconnect y.y.y.y 1001 encapsulation l2tpv3 manual pw-class PW
l2tp id 61001 101
redacted#show l2tun session all
Session id 61001 is up, logical session id 65668, tunnel id n/a
Remote session id is 101, remote tunnel id n/a
Locally initiated session
Unique ID is 24
Session Layer 2 circuit, type is HDLC, name is Serial0/0/0
Session vcid is 1001
Circuit state is UP
    Local circuit state is UP
    Remote circuit state is UP
Call serial number is 0
Remote tunnel name is
Internet address is y.y.y.y
Local tunnel name is
Internet address is x.x.x.x
IP protocol 115
Session is manually signaled
Session state is established, time since change 19:04:36
    1087277 Packets sent, 0 received
    21281118 Bytes sent, 0 received
Last clearing of counters never
Counters, ignoring last clear:
    1087277 Packets sent, 0 received
    21281118 Bytes sent, 0 received
    Receive packets dropped:
      out-of-order:             0
      other:                    0
      total:                    0
    Send packets dropped:
      exceeded session MTU:     0
      other:                    0
      total:                    0
DF bit off, ToS reflect disabled, ToS value 128, TTL value 10
Sending UDP checksums are disabled
Received UDP checksums are verified
No session cookie information available
FS cached header information:
    encap size = 28 bytes
    45800014 00000000 0a738706 0a741822
    0a74fbe7 00000065 00000000
Sequencing is on
    Ns 1087268, Nr 0, 0 out of order packets received
    Packets switched/dropped by secondary path: Tx 0, Rx 0
Conditional debugging is disabled
SSM switch id is 4226, SSM segment id is 12422
The traffic is unidirectional so it's expected to only have packets sent and not received. This works fine. However, if put the loopback in a VRF, the tunnel still comes up but no traffic is forwarded.
int loopback 0
ip vrf forwarding OPER
This would stop the traffic from passing through the tunnel. I suspect that the Cisco implementation of L2TPv3 is not VRF aware but have been unable to get any confirmation so far.
Has anyone else tried to deploy this when sourcing from a VRF?

Hi All,
I could solve it myself. Thanks for the time.
The problem was I tried to navigate directly from the component ''BT125H_TASK' to the component 'CRMCMP_CMG', as I could not find any parent for BT125H_TASK earlier.
Now I could find its parent component which is 'BT110M_ACT'.
The outbound plug created in the task component has to be added to the component usage of 'BT110M_ACT' and the delegation should be done. The other things are the same. It works fine.
Regards
Vidhya

Similar Messages

Maven giving "annotations are not supported in -source 1.3" for @Entity

I m using maven for spring, hibernate with jpa . When i m running comman "mvn clean install" ,it is giving error in compilation of a bean class which is using jpa annotations.The error is :
annotations are not supported in -source 1.3
(use -source 5 or higher to enable annotations)
@Entity
Pom.xml is as below :
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.niit.core</groupId>
<artifactId>Spring3Example</artifactId>
<packaging>jar</packaging>
<version>1.0-SNAPSHOT</version>
<name>Spring3Example</name>
<url>http://maven.apache.org</url>
<properties>
<org.springframework-version>3.1.2.RELEASE</org.springframework-version>
</properties>
<repositories>
<repository>
<id>JBoss Repo</id>
<url>https://repository.jboss.org/nexus/content/repositories/thirdparty-releases</url>
</repository>
</repositories>
<build>
<plugins>
<plugin>
<artifactId>maven-war-plugin</artifactId>
<version>2.0</version>
</plugin>
</plugins>
</build>
<dependencies>
<dependency>
<groupId>org.springframework</groupId>
<artifactId>spring-context</artifactId>
<version>${org.springframework-version}</version>
</dependency>

<dependency>
<groupId>org.springframework</groupId>
<artifactId>spring-core</artifactId>
<version>${org.springframework-version}</version>
</dependency>
<dependency>
<groupId>junit</groupId>
<artifactId>junit</artifactId>
<version>3.8.1</version>
<scope>test</scope>
</dependency>
<dependency>
<groupId>javax</groupId>
<artifactId>javaee-api</artifactId>
<version>6.0</version>
<scope>provided</scope>
</dependency>
<dependency>
<groupId>org.hibernate</groupId>
<artifactId>hibernate-core</artifactId>
<version>3.6.10.Final</version>
</dependency>
<dependency>
<groupId>org.hibernate.java-persistence</groupId>
<artifactId>jpa-api</artifactId>
<version>2.0-cr-1</version>
</dependency>
<dependency>
<groupId>org.hibernate</groupId>
<artifactId>hibernate-entitymanager</artifactId>
<version>3.5.0-Beta-2</version>
</dependency>
<dependency>
<groupId>javax.servlet</groupId>
<artifactId>servlet-api</artifactId>
<version>2.5</version>
</dependency>
</dependencies>
</project>
And class is as below :
package com.niit.form;
import javax.persistence.Column;
import javax.persistence.Entity;
import javax.persistence.GeneratedValue;
import javax.persistence.Id;
import javax.persistence.Table;
@Entity
@Table(name="CONTACTS")
public class Contact {
@Id
@Column(name="ID")
@GeneratedValue
private Integer id;
@Column(name="FIRSTNAME")
private String firstname;
public String getFirstname() {
return firstname;
public void setFirstname(String firstname) {
this.firstname = firstname;
public void setLastname(String lastname) {
this.lastname = lastname;
public Integer getId() {
return id;
public void setId(Integer id) {
this.id = id;
}

java version is 1.6.0_24
There is no settings.xml in users/.m2
I think , maven is using default settings.xml which is in M2_HOME\conf which has everything commented as below:
<?xml version="1.0" encoding="UTF-8"?>


<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">




<pluginGroups>

</pluginGroups>

<proxies>

</proxies>

<servers>


</servers>

<mirrors>

</mirrors>

<profiles>


</profiles>

</settings>

Safari browser version you are running does not support community tool bar. what's that mean and where is it coming from or how do I get rid of it ?

I keep getting the message "Safari browser version you are useing does not support community tool bar." Where is this coming from and how do I get rid of it ?

That toolbar/ct plugin causes problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

Error -annotations are not supported in -source 1.3

Hi friends, when I try to compile my src code using ANT ,
it gives me this error :
annotations are not supported in -source 1.3 -
use -source 5 or higher to enable annotations)
@Override
^
what is source 5...? If it is a jdk version than I am using jdk 1.6.X
Plz help

ANT is apparently compiling with the -source 1.3 option, meaning that the code must be compatible with java 1.3. Check the declaration of the javac ant task in your build file. It should have something like this:
<javac source="1.3" ../>remove that attribute.

Why are these Webservices not supported in VC ?

Hi all,
I am using NW04s SP9, and I plan to make MDM-Application with VC.
Therefore I introduced MDM-WebService into NW and defined it on VC.
but "searchRecords" of "MDMSearchRecords" was displayed with "Not supported"
in the right frame .
Mmm...
So I decided to think from a beginning.
[http://www.27seconds.com/Holidays/US/USHolidayService.asmx?wsdl|http://www.27seconds.com/Holidays/US/USHolidayService.asmx?wsdl]
I defined above it on VC and I used "Getholidaydate" .
Good! .
However,,, "Getholidaysforyear" was also "Not supported".
Why are these methods "Not supported" ? .
and how will come to be usable these methods in VC? .
Thanx in advance.
Regards,
k.sugimoto.

Hi
Visual Composer supports Web services that are compliant with the Basic Profile 1 standard of the Web Services Interoperability (WS-I) Organization (http://help.sap.com/saphelp_nw70/helpdata/en/e0/92583ab4da4b9cb524f61ba4267d25/content.htm)
Best regards
Vincenzo

Are .mp4 files not supported when trying to merge 2 videos into 1 video?

Are .mp4 files not supported when trying to merge 2 videos into 1 video? The steps in the manual seem simple enough. But the paste function won't work on the 1st video after selecting all and then copy on the 2nd video.

There are 9 different versions of iPhoto and they run on eight different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.

JavaScript required. The browser that you are using does not support JavaSc

I keep on getting this message when I'm trying to log on to Hotmail
JavaScript required. The browser that you are using does not support JavaScript, or you may have disabled JavaScript
And my browser (IE 6) cannot go to any java links. They either don't load or they are blank pages. I tried installing java, enabling them on the internet options, and even installed a new browser it is still the same thing!!!
I'm very pissed right now but I really really need some help. Sorry for the inconvenience.
Thank you, Zaragon

JavaScript is different from Java. Somehow, security has gotten turn on in IE. If you go to tools, internet options, security, then look at Internet (for hotmail anyway), hit the custom level button, you will see that scripting has been disabled.

CUCM 9.1 in VirtualBox - The hardware you are using is not supported for this product

I'm trying to load CUCM licensed through my work onto an oracle VirtualBox running linux redhat, and its unpacking linux fine onto the vbox, and passes the hardware test on boot but when it goes to load I'm getting the error "The hardware you are using is not supported for this product."
I have dedicated to the VM:
4GB ram
4 CPU's (tried 2 and 4)
80GB Hard Drive
What in the world could be jamming this up? Anyone else ever run this or know what the deal is?
Any input is appreciated, thanks!

We only support ESXi
Sent from Cisco Technical Support iPad App

When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?

When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?

TLCMediaDesign wrote:
I've seen a lot of threads about getting rid of these kind of messages. Those messages are there for a reason most of the time. If you have CSS animations or other HTML5 standards that cannot be rendered in IE9 they won't magically start working becuse you got rid of a message. I use IE9 since that is the minimum standard for the client. I have never seen that message publishing to HTML5 content.
IMO, if your client has IE9 I think that you should develop with IE9 in mind not IE11.
When you say "develop with IE9 in mind not IE11" do you mean use SWF instead of HTML5? I used the standard question types, and a converted PowerPoint presentation. I didn't add anything out of the ordinary.

Secure zone - ERROR: The payment gateway that you are using does not support recurring payments

So I want to sell a product that is made up of 4 downloadable products. (Totalling ~ 200meg)
The only way I have found is to sell membership to a secure area where the files are linked.
When I create the secure zone, I want a one-time-fee, but the system says:
"ERROR: The payment gateway that you are using does not support recurring payments"
The payment isn't recurring!
Micah

"Note that you have to use seamless gateway to process such payments."
Right, but that's the problem, we're not usiong a seamless gateway and thus we get the error. Again, the system should note that we're doing a one-time charge and not throw the seamless gateway error.
Micah

Feauture not supported Exception thrown from RowSet.

When running
import java.sql.SQLException;
import javax.sql.RowSet;
import com.sun.rowset.JdbcRowSetImpl;
public class TestRowSet {
     public TestRowSet() {
          try {
               Class.forName("com.mysql.jdbc.Driver");
               RowSet rowset = new JdbcRowSetImpl();
               rowset.setUrl("jdbc:mysql://localhost/test");
               rowset.setUsername("root");
               rowset.setPassword("root");
               rowset.setCommand("select * from Account");
               rowset.execute();
               rowset.next();
               rowset.setString("password", "password");
               rowset.updateRow();
          }catch(Exception ex) {
               ex.printStackTrace();
     public static void main(String[] args) {
          new TestRowSet();
}I get
java.sql.SQLFeatureNotSupportedException: Feature not supported
     at com.sun.rowset.JdbcRowSetImpl.setString(Unknown Source)
     at TestRowSet.<init>(TestRowSet.java:20)
     at TestRowSet.main(TestRowSet.java:29)I'm using the latest driver. So am i to take from this that RowSet is not fully implemented in the driver and I should just use ResultSet, or is it something else?
Edited by: Alyosha on 08-Mar-2011 01:43

If there is another documented way of using row sets I haven't found it.
Not that I have the slightest idea of what they are for, except CachedRowSet. Why you would want to de-transactionalize an update and fetch all the rows and then update them yourself when SQL can almost certainly express the whole thing without the round trips and latency and extra lock time and extra Java code is a mystery to me. I was once required to do all that after I had already written a single SQL statement that would do the entire job. I don't work there any more ;-)

Logic Pro, the only host to not support midi out from plugins ?

it seems that logic is the only host that does not support midi plugin output.
something to do with the AU spec, lets hope that apple add support for these type of plugins sometime in the near future.

Um, yeah. The Environment.
Sensational.
Here's one set of instructions on how to build a step sequencer using the environment:
http://www.logic-cafe.com/Article_View.asp?ID=6&CategoryID=7
Though I can confirm that it works, that is just so amazingly, utterly, retardedly bass-ackwards (the German phrase is "von hinten durch die Brust ins Auge" - "from behind, through the chest, and into your eye") that it's a perfect example of why I HATED Logic 7 and previous versions:
There was always a way to do almost anything in at least a halfways-working fashion, but you had to actually know one of the engineers at Emagic to have the slightest clue of how to get it done.
Logic 8 is the first version that actually feels like it was built for HUMANs.
In short, I'm afraid that building a step sequencer in the environment really does not qualify as an option.

Lightroom not supporting Raw files from Nikon D5200

hi only new here ,has any one else found this problem ,just bought the Nikon D5200 and i always shot in RAW but have now found after my first shot with the new camera that Lightroom 4.3 wont support Raw Files from this camera

Yes it does.
See here: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Scroll down to Nikom (it goes alphabetically by vamera makers), tne D5200 is listed as being supported in Lr 4.3.
What does Lr say? Do you get an error message?
Also, did you use an older version of Nikon Transfer or Niko n View? There is something in these older versions that makes the files not readable for Lr.
Update any Nikon software you might have.

Elements 7.. raw plugin 5.5 .. Dose not support raw files from Canon 60D

Elements 7 dose not support raw files Canon 60D. I have up dated the raw plugin to 5.5 still dose not support my cameras raw files

http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
The 60D is included from ACR 6.2 on. I think that means you may need Elements 9 or later.

Aperture does not support raw files from my Leica d-lux 6.

When will Aperture support RAW files from a Leica d-lux 6?

You can download a free copy of Adobe DNG Converter. You then can use this program to convert the D Lux RAW files into DNG RAW files. Aperture will be able to read the DNG files. This is a bit of pain but it will work until Apple supports the D Lux in its usual glacial time span.

Are L2TPv3 endpoints not supported to source from VRFs?

Similar Messages

Maybe you are looking for