Are Multiple (Concurrent) ABAP Data Sources for AS Java UME Possible?

Hi All,
We have a solution which is using a JAAS logon module for partner authentication. for reason's I won't go into we have decided that it is best to use an ABAP data source. We will also be using the same JAAS approach for other ABAP applications in the future. Ideally we would configure the same JAAS server to use ABAP UME data sources from ABAP server 1 and ABAP server 2.
I see there are provisions in the documentation for multiple UME data sources of different types but it doesn't clearly say about different concurrent data sources. IS this even possible? If so is it wise?
Thanks,
Doug

Julius,
Thanks again for your reply. This is confusing. We have an existing .Net logon application where we centrally administer accounts and where users log in. On successful login they are issued a .net Auth cookie. Our JAAS module takes that cookie, does a web service call back to .Net and authenticates them. So authentication is done on the basis of the .Net cookie, not the java UME. We simply need a java ume to allow users to execute the application that invokes the JAAS module. The application invokes the JAAS module and if they successfully authenticate they are forwarded to the requesting SAP application. So the JAAS ume is really just needed to allow various users to run the JAAS invoking application starter. Ideally we'd use the same starter application for users of SAP Application 1,2,3, etc.
So that's where the question came from on multiple ABAP UME data sources for a single Java instance.
Hope that makes sense. Regardless the answer I guess is not possible but you see the method to our madness. And yes it is madness.
Thanks,
Doug

Similar Messages

Are there any new data sources?

Hi I have a doubt. Please clarify.
Are there any new data sources for 2LIS_01_S001, 2LIS_11_VAHDR, 2LIS_12_VCHDR. Because in an interview I told that I had extracted from these data sources.
Then the interviewer had asked me, "Is there any specific reason for using the LIS data sources, because SAP has strongly recommended not to use these LIS data souces".
I replied that SAP has recommended not to use LIS extraction to extract the data from these data sources and I used LO extraction to extract data from these data sources.
My first question is, Is it correct what I told to the interviewer?
If what I told to the interviewer is wrong then my second question is
Is there any new name available for these the following data sources:
2LIS_01_S001,
2LIS_11_VAHDR,
2LIS_12_VCHDR
If so please let me know what it is?
Please advise.
Thank you.
TR.

Hi Anil,
Thank you for that reply. When you say,
"But the DS 2LIS_01_S001 is old one, These DS can be replaced by all Latest 11,12 and 13 application Datasources."
What is the new name for the customer data source 2LIS_01_S001?
Also is there any link or any document where I can get a list of the old data sources and the new ones. Please advise.
Thank you.
TR.

Data source for the concurrent program 'Send Separate Remittance Advices'

Hi All,
We have requirement to develop a custom report to send the remittance to the vendors.
But we are unable to figure out on how to get the data source for the standard program 'Send Separate Remittance Advices'.
The program is of the type Java concurrent program. Is there any way to get the XML tags for this program.
Thanks,
Manoj

hi,
pls see:
R12 Send Separate Remittance Advice - Data Source (srini)
and also:
http://apps2fusion.com/apps/14-fwk/69-java-concurrent-programs
http://oracle.anilpassi.com/xml-publisher-concurrent-program-xmlp.html

What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss

What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
Please help me out.
thanks,
sapsdnhelp

Hi,
Check this:-------
Urgent: Relevant Master Data Data Sources for FI-GL & FI-AP
http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
Regards,
Suman
Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

What are the Non SAP data sources supported for Analysis workbooks?

AO 1.4 SP6
BO 4.1 SP2
What are the Non SAP data sources supported for Analysis workbooks?
Thanks.

HANA is a data source (which could contain non-SAP data)
For other Excel front-ends that may connect to "non-SAP" data look at Live Office or Power BI by Microsoft - see Excel and Power BI connectivity to SAP BusinessObjects Universes | Power BI

Data source for a planning area

Hi Experts,
I have created a data source 9AZDP_APAP for my planning area ZDP_APAP. When I'm creating this data source, SAP itself prefixing my datasource name with '9A'.
I'm wondering is this ( Starting the data sorce name with '9A') with in our system only or with every system.
If it is with every system then is there anyway I can override this.
The reason why I'm asking this question is my data source is giving error " M version is different from A version' in RSA1, when I'm trying to activate my datsource I'm getting authorization error. When I contacted my security people on this they are telling I'm not following the naming standards. They are telling that the data source name should start with Z.
All the inputs on this will be highly appreciated.
Regards,
Brahma Reddy

Hi,
Generating a data source on a planning area in APO is really very helpful function we have. this will help us to save a lot lot time to generate cube/rules/source.
Definately, when system generates the data source it will follow its own logic "9A" which we can not change.
I guess you create a DataSource manually if required, where you can follow your own logic, but that is not really consistent as system generates. becuase when it generates, it will check for time char and all based on storage bucket profile and generates.
Hope my information will help you in understanding the importance of auto generation of data source
Yarala

What are Data sources for 0PUR_c10

Hi ,
Now iam activating BCT for 0PUR_c10 cube in BI 7.0
before activating in BI side can i know
1. what are the Data sources for can i activate in RSA5 in r/3 side for Tranastion data and master data ?for that 0PUR_c10 cube ?
2. plz tell me , what are master data info objects in BW side for MM data ?
i will assign points .....
Thank u
PSR


1. what are the Data sources for can i activate in RSA5 in r/3 side for Tranastion data and master data ?for that 0PUR_c10 cube ?
PO delivery schedule lines are first consolidated in an ODS through data from the InfoSources Purchasing Data (Document Schedule Line Level) as of 2.0B (2LIS_02_SCL) and Offsetting Confirmation and Goods Receipt (2LIS_02_SGR).
http://help.sap.com/saphelp_nw70/helpdata/en/bb/e99a3d35cf6f53e10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/41/2b52e35f153014e10000000a114e5d/content.htm
Do look for the dataflow/network diagram for 0PUR_C10 in Metadata Repository - you can find the BContent Flow.
2. plz tell me , what are master data info objects in BW side for MM data ?
Right click on ODS's & Cubes in MM - Infosource Overview - This will give the list of loadable data targets for associated Datatargets.
Go to RSA5 search for the datasources.

Multiple data sources for 1 info object

hi all,
i am working with ods 0fiap_003 info source overview u can see for 0comp_code
Company Code: Attributes and Tests (Flexible Update) this is a transaction data data source.
G/L Account: Attributes (Flexible Update) this is a transaction data data source
G/L Account: Texts (Flexible Update) 0GL_ACCOUNT_TEXT this is a transaction data data source
and there r master data data sources for these objects
G/L Account hierarchy text attributes r available.
so only for 0gl_account 5 data sources available.
3 master data ds.2 flexible data trans data data sources.same for comp code.
so how can we map for these 5 dsources in this scenario.
i am going to create process chains for master data(3) transaction data(1).
should i put trans .data info packages in the transaction data process chain
ex: G/L Account: Attributes (Flexible Update) this one.
plz suggest me
regards
sridhar

Hi Sri,
There can be multiple datasources assigned to a single master object. Only they should be unique per source system.
Regarding process chain, u should include the infopackage for transaction data in trans data process chain. This is because ur job scheduling for master and transaction load would differ. So the process chains should be separate.

What are all the Standard Data targets&Data source for Warehouse management

Hi,
What are all the Standard Data targets & Data source for Warehouse management.
Thanks,
Ahmed.

HI,
the master data
1.equipment data --IE01
2.All functional locatiions -IL01
3.Maintainnace work centers - IR01
4.Task list data - IA05
4.Schedule maintanence plan
6.Strategies
7.Measuring points
8.Characters for calibration
9.Equipemnt BOM
10.Material BOM
Regards,
Anddra

What are all the Standard Data targets&Data source for Transportation Manag

Hi,
What are all the Standard Data targets & Data source for Transportation Management.
Thanks,
Ahmed.

HI,
the master data
1.equipment data --IE01
2.All functional locatiions -IL01
3.Maintainnace work centers - IR01
4.Task list data - IA05
4.Schedule maintanence plan
6.Strategies
7.Measuring points
8.Characters for calibration
9.Equipemnt BOM
10.Material BOM
Regards,
Anddra

Creating data source for planning area

Hi Experts,
Can you please help me by providing steps to create data source for planning area.
Thanks in advance for your help.
Regards,
Brahma

Hi Brahma,
Please follow below link....
http://help.sap.com/saphelp_scm50/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Hope this may help
Regards,
Harshil Desai

CUA as data source for portal UME

Hi all
We want to use the CUA system as the data source for our EP6's UME.
Obviously our end users do not login to the CUA system and therefore have no password to this system. It doesn't seem rational to provide them a password to this system, but then again which password will they use?
I'm guessing that this is the case for most of the SAP customers.
Does this mean that we can't use the CUA as the UME data source?
If any of you use the CUA as the UME, we'd be very glad to hear your solution to this situation (we can't use one of the child systems as the UME).
Thanks,
Yeti

Hi Yeti,
My remarks below will not answer your question but it will help you with some decision on your UME data source.
As far as I know, most Portal use LDAP as their main UME datasource. This is largely due to the fact that LDAP contains ALL the users that are "employee" of the company. As for CUA, it does not contain ALL your users which could pose a problem for you when you want to execute certain Portal functions (or management approval flows) which require users who does not exist in your CUA (but exist in LDAP).
3 presentations which I think its good to have a look and share with....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d5f57332-0a01-0010-12ab-dd472e87b8e6
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c477de90-0201-0010-35ab-ddac4448ba9f
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706065c4-3564-2a10-2382-a52fcbd7eefb
But there are also setup that uses CUA as their UME. I have linked some of the past threads who use CUA as their UME. I hope they can shine some light to your question. You can do a search here in the forum with "CUA UME portal" and you will also find posts that can help answer your question.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706d054d-da24-2b10-f18a-fc82faf6468e
Solution Manager as a source for Portal UME
Multiple SAP Systems as UME
EP
Something to think about if you consider SSO with CUA as UME.
how to sso between portal and abap
Something more interesting to read about:
LDAP connection from ABAP to Portal
The above are base on my experience and the Portal setup which I have done for the company. But maybe there are better suggestions from other Portal guys,Experts,Gurus out here who will contribute to answer your question.
Hope that helps.
Ray

Data source for Deposit Advice (XML) and Live CheckWrite (XML) reports

Hello All,
We need to customize the Deposit Advice (XML) and Live Check Write(XML) reports to accomodate a few business requirements. We already have customizations for these reports in non-XML versions. For Ex: USPAYPST.rdf for Deposit Advice report. As these non-XML RDF reports are going to be unsupported by Oracle soon, we need to customize the XML versions of these report available in R12.1.3.
As these reports are kicked off by the PYUGEN spawned program, therefore I need information on the data source for these reports as soon as possible.
Looking forward to your prompt help.
Thanks,
Rahul

Now, I have anew problem here. I modified the USPAYPST.rdf report for Deposit Advice and then changed concurrent program output to XML from Text.
I attached a RTF template to the concurrent program to have the output in XML.
When I run Deposit Invoice Report from the SRS window, it finishes off normally and log file says the number of records processed but no output file is generated.
I also tried looking into the XML generated through View XMl and there too no output file is generated.
I am confused if the Deposit Advice program can only generate Text output. As PYUGEN is the executable for this report, I have no idea if XML file can even be generated.
All pointers to this issue are welcome.
Thanks,
Rahul

Multiple XML HTTP Data sources sequentially

Hi,
We are creating a report using multiple XML HTTP Data sources sequentially.
The Report uses multiple XML HTTP Data sources sequentially; the report creation fails or delayed. We would like to join the datasources after accessing from the HTTP Server.
At the same time the same XML files when locally accessing as data sources, the report is getting created.
Is there any alternate solution for XML HTTP Data Source Access. Or in which way I can proceed with this.
Thanks,
Unni

I am not able to use datasets here.
The context is as below.
I am running an HTTP server (XML-RPC program),which will generate an XML output as defined with a local XML Schema.
Here I have multiple HTTP requests ,each will generate multiple XML outputs.
I am using XML and WebServices Connection where I will provide like below,
(Please note file1,file2 are normal text files with data corresponds to xsds.)
HTTP(s) XML URL : http://localhost:8002/ReadTable?name=file1
Local Schema File : E:\Test\file1.xsd
HTTP(s) XML URL : http://localhost:8002/ReadTable?name=file2
Local Schema File : E:\Test\file2.xsd
Like this I am able to create multiple XML outputs through HTTP requests.(only file1),which means while creating reports the sequential requests are not handling properly.
My report will join say two of theese files. But at the time of report creation it will ask of only runtime parameter of first request in the join.
Here The report will generate only with data from first text(data) file.(file1)
Hope you got a clarity about the proble.

Master Data source for sales district or Region in CRM

Dear All,
Please let me know the Master Data source for sales district or Region in CRM.
Thanks
Regards,
Sai

Hi Tiest,
Thanx for responding.
U r right, our clint is upgrading from 4.6 to ECC.
So as per the clients requirements, we are maintaining all the configs for Services in CRM.
Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
What I am looking os some standard upload program.
LSMW recording does not work.
This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
Till now, I am only able to define just one field name and a field value.
I want this to word for mutliple entries.
Hope u get my point.
Thanx

Are Multiple (Concurrent) ABAP Data Sources for AS Java UME Possible?

Similar Messages

Maybe you are looking for