Are the music menus supposed to be black and white?

After installing the ios6 update, the colouring of the menus in the music app have changed from that blue theme to black and white... Should that have happened?

I much prefer the blue theme, is there a way to change it back?

Similar Messages

  • Can you use color splash on a photo that was edited in black and white or do you have to mask the photo before editing it in black and white?

    can you use color splash on a photo that was edited in black and white or do you have to mask the photo before editing it in black and white?

    I think you are asking whether it makes an difference whether you create the mask before or after you edit the black & white version. The answer is that since the color version and the b&w version are on different layers (as seen here), it makes no difference when you edit the b&w version.
    Also consider another technique that separates the color element in the image. Here, the area surrounding the color image is a line interpretation of the scene, similar to a Tone Line Conversion, a technique that was created with film many years ago.  (I am so old,  I still remember how it was done.) This is how to get the result similar to the one shown above but with a line illustration created in Photoshop replacing the b&w layer version:
    1. Open an image. This technique is more successful if the image you select has many clearly defined edges.
    2. Make a duplicate layer. (Cmd+J). It becomes Layer 1
    3. With Layer 1 chosen, go to Filter>Blur>Smart Blur. Set the Quality to High and the Mode to Edge Only. The default settings are Radius 3.0, Threshold 25.0. To increase the amount of detail in the line conversion, raise the Radius setting. Use the white-on-black illustration within Smart Blur as a guide. Then click OK.
    4. The line illustration will appear as white lines in a black background. To change this to black-on-white, choose Image>Adjustments>Invert.
    5. Insert a new layer below Layer 1. It will serve as the background for the line illustration. To do this, hold down the Command key while clicking on the New Layer symbol at the bottom of the Layers panel. It is the second symbol from the right. It will become Layer 2.
    6. Fill this new layer with a light color. To do this, click on the Foreground Color symbol in the Tools section. It will open the Color Picker. Choose a light color and click OK.
    7. Choose Edit>Fill. Use: Foreground Color.  Mode: Normal. Opacity: 100% and click OK. Layer 2 will fill with the color. Although it will not appear in the image because Layer 1 is above it, a quick check of the Layers panel will confirm that the color you chose has filled Layer 2.
    8. Remove the white area from in Layer 1. Go to Layer 1. Choose the Magic Wand tool. Uncheck the Contiguous box in the Options Bar and click in a white area of the image. Next, click the Delete key.  Choose Select>Deselect to remove the marching ants. 
    9. (Optional)  You may now change the line illustration in Layer 1 from black to a dark color compatible with the color in Layer 2. To choose the color, click on the Foreground Color symbol in the Tools section. It will open the Color Picker. Choose a suitable dark color and click OK. While in Layer 1, click the first symbol next to the word  Lock:  in the Layers panel above Layer 1. This will prevent the dark color from appearing in the blank area of Layer 1. Choose Edit>Fill. Use: Foreground Color.  Mode: Normal. Opacity: 100% and click OK. The black lines will change to the dark color you chose.
    10. Combine Layers1 and 2: While in Layer 1, choose Layer>Merge Down. The layers are combined into a single layer called Layer 2.
    11.  Add a black mask to Layer 2 by clicking on the Mask symbol at the bottom of the Layers panel. It is the symbol to the right of the fx symbol. Where you would like full color objects to appear within the line rendition, paint in white on the black mask with a brush set to either soft-edge or hard-edge as the illustration and your taste dictate.  

  • HT4356 How do I AirPrint in black and white from my iPad so I do not waste the color ink unnecessarily?  I never see the option to choose printing in black and white.

    How do I AirPrint in black and white from my iPad2 wifi/3G so I do not waste the color ink unnecessarily?  I never see the option to choose printing in black and white.  I have an Epson Workforce 845 printer.

    There is no option to force black and white ouput.
    You can request the feature here:
    http://www.apple.com/feedback/ipad.html

  • I've recently purchased an iMac and connected my HP Photosmart C4280 printer. The computer downloaded the driver software but the printer will only print in black and white.There doesn't seem to be anywhere to change this on the preferences menu. Any idea

    I've recently purchased an iMac and connected up my HP Photosmart C4280printer. The computer downloaded the driver but the printer will only print in black and white. I've looked in preferences etc but cant see any way to change this. Any ideas??

    Select a document, CMD+P, and set the color options as shown here:

  • No matter what website I am on all of a sudden the page will be covered in black and white lines and I can't see any of the page. What is happening and how do I fix it? It has only started since I loaded Firefox 4 this week.

    I am very frustrated because I keep having my pages become covered completely in black and white lines. It has even happened on this page when I tried to use the drop down arrow by 'this happened'. I can sometimes read the page if I click over the area I want to read but this is not common. This has only been happening since I downloaded Firefox 4. I thought this would be a better version but now I am not so sure.

    I do not want to download another virus program.. I do not believe it is a virus. I am running the full version of Norton 360 and it is doing a daily scan. I have Windows 7, 64 bit OS.
    This is very irritating !! If I wanted Yahoo I would ask for it !

  • Got the PSE 9 Missing Manual in Black and White?

    Hey all, I don't normally talk about my books here, but if you recently ordered the Elements 9 Missing Manual from amazon and got it in black and white, please contact them.
    They screwed up and somehow put it into their print on demand program instead of shipping the copies from O'Reilly. If you got one of these, get in touch with them and they'll send you a real copy as a replacement. The book should be in color.

    Barbara:
    Ordered mine from Amazon on 11/26/10.  Shipping confirmation email received 11/28/10.
    Full color.  No problems.
    Cheers,
    /kim

  • I own a iphone 5 the camera in photo mode showing black and white and pictures

    My iphone 5 camera in photo mode showing black and white and pictures are captured in black and white only.how to make it in colour mode

    Do you have a filter turned on?

  • Best scanner settings for black and white text only

    I need to scan a lot of older text documents, I have a DRG 1100 scanner. what are the best settings for text only black and white, thanks

    "How about under "Default Settings"? Is there a option for B&W printing?"
    No there isn't.

  • All my illustrations are black and white!

    I reinstalled iTunes and synchronized my iPod and noticed that all the illustrations are all of a sudden in black and white! I checked iTunes and in iTunes they are in black and white too. They used to be in colour before reinstalling. If I play the song in a mediaplayer, the picture is in colour too. I reinstalled iTunes again and loaded the songs in iTunes again but that did not work. Can anyone help me out?

    Is it possible that you're not viewing all channels? In the top right hand corner is a drop down menu where you can select to view all channels, or alpha, red, green or blue. If red green or blue are selected that might make video appear "black and white" and you'll need to change it back to "all".

  • After turning an image black and white, how can I color in a certain area?

    After turning an image black and white, how can I color in a certain area?

    How did you change it? Did you make your B&W on a separate layer? If so, just erase the part of the layer you don't want, or add a layer mask and paint with black over the parts you want to hide.
    If not, then you can copy/paste the original photo (you will need to press ctrl+A/cmd+A to select all before you can copy) into the new image. From there it depends on the relative proportions of B&W. Arrange the two layers so the one with the most area that you want to keep is on top, and either mask out the rest or just erase it away.
    For future reference, an easier way to do this when starting from scratch is to use the smart brush. Choose a black and white conversion style, turn on the inverse checkbox and paint over the part you want in color. The rest of the photo turns black and white, leaving what you paint over in the original colors.

  • Video drivers issue (dual DVI monitors off bay :: one black and white and one color)

    Hello,
        I have tried everything to try to make these two monitors color. They are both relatively new Dell monitors. Both are DVI, both are connected to the latest Lenovo bay for my T430 laptop. Both worked fine after I initially installed both video drivers (Intel HD Graphics Driver for Windows 7 [64-bit]) and NVIDIA Optimus Display Driver for Windows 7 [64-bit]). Then out of nowhere one of them (Dell 1) decides it wants to be seen in black and white! I initially thought it was the monitor itself, but when swapping monitors (Dell 1, Dell 2) the other monitor  (Dell 2) went black and white when plugged into the DVI formerly used by the Dell 1 monitor. Ok, so now it must be the DVI ports on the bay station (Lenovo) right? Nope. I had a tech bring me a second, brand new bay (identical). Same issue! So this leads me to the video drivers...
    Does anyone have any idea. I disabled each driver and reenabled each to no avail. The drivers are the latest drivers downloaded directly from Lenovo's site. Checked the driver settings/monitor setting using both Windows 7 Professional and Nvidia to see if anything stood out. Nothing.
    Any help would certainly be appreciated. Thank you in advance! :~)

    I got a new laptop and when I plugged it into my docking station the external monitors were all in black & white.  My old computer still worked fine without changing any settings on the monitors.  I found that I needed to go into Control Panel \ NVidia Control Panel \ Display \ Adjust Desktop Color Settings, then select the monitor I wanted to adjust, then set the slider up for Digital Vibrance.  For some reason on the new laptop the NVidia settings defaulted to 0 for this.

  • Printing in Black and White problem

    Everytime I want to print in black and white I choose that option, click ok, then print.  The paper still comes out in color.  This happens on my work computer and my home computer.  I know it is not the printer because I can print word documents and websites in black and white.  Only pdf files refuse to print in black and white.  I have 200 pages I need to print for work that does not have to be in color and I don't want to waste my ink.  Does anyone know what I can do to fix this problem?  Thanks.

    You should make sure that anything on your interior pages is black and white, never trust someone else to convert things to B&W for you. If you are using a master page for the page numbers, that should be black and white too. You can have two master pages, one for color page numbers and one for black and white page numbers.
    Jay

  • Watching Movies: iPod to TV- black and white and split screen. Help?

    I have this cable: http://www.radioshack.com/product/index.jsp?productId=2994604
    As you can see, the chord colors on that cable are red, green, and white. The places where the chords go in on my DVD player are yellow, red, and white. As you can tell, they don't go up. I connected them so the audio works fine, but the movie shows up ONLY in black and white, and the screen is split right down the middle. On my iPod, the 'Video Setting' do not fix this. I also have the iPod Classic 80 GB, for reference.
    Help?

    Toggle between PAL and NTSC on video setting.

  • 32L1400U TV only shows in black and white !

    Model 32l1400U is 4 months old and is only used as a TV ( no games , DVD  player are  hooked up )
    it only shows in Black and White
    i looked thur the menu and see no option for black and white !
    TV has been playing in color untill about a week ago
    Thanks  

    When you press the INPUT button on the remote to cycle through the inputs, is "ColorStream HD" listed? Is "Video" listed?
    The Xbox is connected using 5 cables, correct? Red, blue, green, white, and red?
    - Peter

  • Black and white printing using Gutenprint

    My HP printer has no drivers in SL, but I can print using Gutenprint.
    The Gutenprint FAQ says
    For most users, the work-around is to set the Color Model setting to Grayscale. This is not the same as printing in black and white only, but it may give you what you want.
    For those users who must use black and white only, the good news is that the Quartz Filter for Black and White still exists. It's just not tied into the print window. The easiest way to use the Black and White option is as follows:
    Go to print the document. Use the item "Open PDF in Preview" item under the PDF Services drop down menu at the bottom left of the print window.
    When the document appears in Preview, choose Save As... from the File menu.
    You can either change the name or use the Replace option when prompted. Select the output format as PDF and use the Quartz Filter to select "Black and White".
    Make sure you have the name and location to save the document as you want it. Click the Save button.
    The resulting document will be in Black and White and you can print it normally.
    I can guess what this means, but I am not certain, so I would be glad if someone has a definitive answer.
    My guess is that Grayscale usually prints using the colour cartridge, but that following this procedure lets one print using the black cartridge only.
    This is an important issue. Given the cost of colour cartridges, I only want to use them when I need colour, not for plain text.
    I would also be interested to know the difference between the two colour modes available, labelled Color and CMYK, but this isn't so important.

    Welcome to the Apple Discussion boards.
    The product brochure for the DP-C213 shows that PostScript is an optional add on. Are you sure that you have the PostScript module installed? Without the optional PostScript module, you will only get the raw PostScript code when you use the PostScript driver.
    The Gutenprint generic PCL drivers do not print color. They are grayscale only.
    The product brochure for the DP-C213 does show that it comes standard with the PCL 6 printer module. The best color driver would be the pxlmono/pxlcolor driver. You can download all you need from http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/pxlmon o. You will need to install three packages. The pxlmono, Foomatic-RIP, and the Ghostscript package.
    Now for the confusing part. When you go to set up the printer use the *"Generic PCL 6/PCL XL Printer Foomatic/pxlcolor (recommended)"* driver. That will give you color printing. The OpenPrinting database is in error and only shows your printer to be a grayscale printer, so you *do not* want to choose the "Panasonic DP-C213 Foomatic/pxlmono (recommended)" driver. That driver will only produce grayscale printing.
    EDIT: The URL for the product brochure is ftp://ftp.panasonic.com/pub/Panasonic/business/office/brochures/DP-C213_Brochure .pdf
    Message was edited by: Matt Broughton

Maybe you are looking for