Arithmetic operations using Picklist field values

Hi,
I tried to multiply a picklist field value as below and wanted to store the result in a field (datatype = Integer or Number) using a workflow which triggers based on the Trigger Event "Before modified record saved".
Criticality = [<plFrequency_of_Occurrence_ITAG>] * 10
It throws an error:
"Update Criticality : Value too long for field 'ZNum_0' (maximum size 16). (SBL-DAT-00235)(SBL-ODS-00500)"
Can't we do arithmetic operations on the Picklist fields? I believe this is because the values are being stored as text??
Do we have a function to convert the character field to numeric before we perform any arithmetic operations?
Thanks,
Sriram

Hi,
You're right, you can't perform arithmetic operations with a number and a text. That's why you get the error.
Today, there's no function you can use to convert a text to a number.
You'll need to create a SR asking for a Change Request.
Regards,
Max

Similar Messages

How to use table field values as dynamic parameters on selection screen

Hi,
I need help on dynamic selection parameters.
I need to display no. of parameters from the fields of a database table.
Basically i want to pass field values of a table to selection screen and we can use those values as parameter on selection screen.
If there are 10 entries in a table field( say field is field_name and entries are bukrs,kunnr etc.)
I need to display as many parameters on screen as many values are there in field_name( In this case it is 10)
SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETERS:
p_bukrs(5) ,
p_kunnr(5) ,
SELECTION-SCREEN END OF BLOCK b2.
Thanx

Hi,
You can create it using Dynamic Program.Check this link below.
[Creating Dynamic Programs|http://help.sap.com/saphelp_46c/helpdata/en/9f/db996135c111d1829f0000e829fbfe/content.htm]
Hope this might help you.
Thanks,
Prashanth

Using MISSING FIELD VALUES ARE NULL for external table

I want to place a null for values missing in the sub_account field. Here is my external table:
CREATE OR REPLACE DIRECTORY INCOMING_ORDERS_log_dir
AS 'c:\starpubs\starpubs\dataformats\logs\INCOMING_ORDERS\log';
CREATE OR REPLACE DIRECTORY INCOMING_ORDERS_bad_dir
AS 'c:\starpubs\starpubs\dataformats\logs\INCOMING_ORDERS\bad';
create table ext_INCOMING_ORDERS_table (
Account varchar(5),
Sub_Account varchar(1),
Override_Code varchar(1),
Nomenclature varchar(28),
chg_nbr varchar(3),
quantity integer,
U_I varchar(5),
zipcode varchar(5),
type_reject varchar(2)
organization external
type oracle_loader
default directory user_dir
access parameters
records delimited by newline
missing field values are null
badfile INCOMING_ORDERS_bad_dir:'INCOMING_ORDERS%a_%p.bad'
logfile INCOMING_ORDERS_log_dir:'INCOMING_ORDERS%a_%p.log'
fields
Account(1:5) char(5),
Sub_Account(7:7) char(1),
Override_Code(10:10) char(1),
Nomenclature(11:38) char(28),
chg_nbr(40:42) char(3),
quantity(44:48) integer external,
U_I(50:54) char(5),
zipcode(56:60) char(5),
type_reject(61:62) char(2)
location('PTCLICK.MANUAL.NOMEN.TXT','PTCLICK.ORDERS.TXT', 'EUR_RES.TXT', 'MQ.TXT', 'BPRO.TXT')
reject limit unlimited;
How can I place the MISSING FIELD VALUES ARE NULL for missing values for the sub_account?

made the change I received this error:
SQL> select * from ext_INCOMING_ORDERS_table;
select * from ext_INCOMING_ORDERS_table
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-00554: error encountered while parsing access parameters
KUP-01005: syntax error: found "no": expecting one of: "comma, date_format,
defaultif, enclosed, ltrim, lrtrim, ldrtrim, notrim, nullif, optionally, ),
rtrim, terminated"
KUP-01007: at line 7 column 26
CREATE OR REPLACE DIRECTORY INCOMING_ORDERS_log_dir
AS 'c:\starpubs\starpubs\dataformats\logs\INCOMING_ORDERS\log';
CREATE OR REPLACE DIRECTORY INCOMING_ORDERS_bad_dir
AS 'c:\starpubs\starpubs\dataformats\logs\INCOMING_ORDERS\bad';
create table ext_INCOMING_ORDERS_table (
Account varchar(5),
Sub_Account varchar(1),
Override_Code varchar(1),
Nomenclature varchar(28),
chg_nbr varchar(3),
quantity integer,
U_I varchar(5),
zipcode varchar(5),
type_reject varchar(2)
organization external
type oracle_loader
default directory user_dir
access parameters
records delimited by newline
badfile INCOMING_ORDERS_bad_dir:'INCOMING_ORDERS%a_%p.bad'
logfile INCOMING_ORDERS_log_dir:'INCOMING_ORDERS%a_%p.log'
fields
Account(1:5) char(5),
Sub_Account(7:7) char(1) NO PRESERVE BLANKS,
Override_Code(10:10) char(1),
Nomenclature(11:38) char(28),
chg_nbr(40:42) char(3),
quantity(44:48) integer external,
U_I(50:54) char(5),
zipcode(56:60) char(5),
type_reject(61:62) char(2)
location('PTCLICK.MANUAL.NOMEN.TXT','PTCLICK.ORDERS.TXT', 'EUR_RES.TXT', 'MQ.TXT', 'BPRO.TXT')
reject limit unlimited;

Using a field value as subject in Email Submit - help

Hi there,
I am new to the forums and very new to LiveCycle and XML and Java.
All i need is some hopefully very simple help.
I have a PDF form, and all i want is when i click the submit button it uses the value entered into the textbox called JobCode as the subject in the email.
how to do i adapt it to this code:
<event name="event__click" activity="click">
<submit format="xml" textEncoding="UTF-8" target="mailto:[email protected]?subject="/>
</event>
What do i type or where do i put whatever to make it work. it should be simple.
Thank you in advance
Jason

GOT IT...
After a lot of mucking around and then leaving to watch a movie then coming back with a fresh mind i nailed it.. haha
feel like a bit of a goose cause i couldnt figure it out earlier but i got now..
i needed to use
var oJobCode;
var oSubmit;
var oSubject;
var oBody;
oJobCode = form1.Page1.JobCode.rawValue;
oSubmit = form1.Page2.TrdsRspn.rawValue;
oSubject = "Job Code: "+ oJobCode;
oBody = "Works Report Submitted by: " + oSubmit;
event.target.mailDoc({bUI: true,cTo: "[email protected]",cCC: "",cSubject: oSubject,cMsg: oBody});
AND BAM!
Works perfectly.

Left-shift operator used on byte values

Hello,
I'm reviewing some problems, and I need some help. I have a program that has some code like the following:
byte y = 10; // 00001010 in binary
byte result = (byte) (y << 1);
System.out.println("result: " + result); // 20. Ok.
result = (byte) (y << 7);
System.out.println("result: " + result); // 0. Ok.
result = (byte) (y << 8);
System.out.println("result: " + result); // 0. Why???
// I was expecting a shift of 0 bits because the
// right-hand operand is equal to the number of
// bits for the size of the result type--in this case
// 8 bits for a byte.
// 8 % 8 = 0 number of bits for the shift.
result = (byte) (y << 6);
System.out.println("result: " + result); // -128. Ok.
result = (byte) (y << 10);
System.out.println("result: " + result); // 0. Why???
// Shouldn't it be 2 bits for the shift?
// That is, 10 % 8 = 2.
// I was expecting 40 as the the answer for this one.I understand that for binary operations that the operands will be promoted to at least int types before execution occurs, but I still don't see how it would make a difference for the left-shift operator. Any help and clarification on this will be appreciated. It would be helpful to see the binary representation of the the "result" variable for the ones that I'm asking about. Thanks in advance.

result = (byte) (y << 8);
System.out.println("result: " + result); // 0. Why???
// I was expecting a shift of 0 bits because the
// right-hand operand is equal to the number of
// bits for the size of the result type--in this case
// 8 bits for a byte.the result of (y << 8) is an int, not a byte. the byte "y" is promoted to int for the bit shift. so the int result of the bit shift is 00000000 00000000 00001010 00000000. when you cast that back to byte, the 24 leftmost bits get lopped off, and you're left with zero.
hth,
p

Constant Field Values

A simple question.
Does anyone know how to use Constant Field Values of PAPI?
Please paste the sample code.
Thanks.

Hi,
<div class="jive-quote"><span class="jive-quote-header">user11087863 wrote:</span>
. . . Does anyone know how to use Constant Field Values of PAPI? . . . </div>
Sure it's just me (what I don't know about PAPI could fill volumes :) ), but could you go into a bit more detail about what you mean by "Constant Field Values"?
Know I'm sure to learn something new out of this.
Thanks,
Dan

Adobe Acrobat as a server to create PDF using PDF templates and field values

I'm writing a web page to create a PDF using fields that we ask for them in the screen.
My idea is:
1. Ask for field values (text values and a photo) in my web
2. Run Adobe Acrobat to load a PDF template (PDF form) and mix with the field values
3. Create a final PDF mixing values and template
4. Show to document to the user in his client web browser. I guess the only way to do that is to create the PDF on a server with Adobe Acrobat Pro and send to the user browser a JPEG that will represent the PDF: If I do this operation in the PDF visor at the client browser, the problem is that it will will be mandatory to install Adobe Acrobat in each cliente because only this visor can manage javascript.
Can you tell me if this idea is correct? It is possible to use Adobe Acrobat on a Server to create PDF when some proccess needs?

and what other Adobe product o procedure can we use to do that?
I only need to create a PDF mixing PDF Templete, field values and javascript.
Thanks for your help.

Using Modulus (%) arithmetic operator with decimals

When trying to use the arithmetic operator modulus with decimals there seem to be some errors in the results. Is there a restriction on the number/value of decimals that can be used with this operator? Am I perhaps just using it incorrectly?
example ...
Double valA= new Double("12.4");
Double valB = new Double("1236");
double result = valB.floatValue() % valA.floatValue();
System.out.println("valB : " + valB );
System.out.println("valA: " + valA);
System.out.println("result : " + result);
produces :
valB : 1236.0
valA : 12.4
result : 8.40003776550293
But :
Double valA= new Double("12.5");
Double valB = new Double("1236");
double result = valB.floatValue() % valA.floatValue();
System.out.println("valB : " + valB );
System.out.println("valA: " + valA);
System.out.println("result : " + result);
produces :
valB : 1236.0
valA : 12.5
result : 11.0

Floating point arithmetic in general is not exact. The problem is that you are expecting exact results.
In the second example where you use 12.5 and 1236.0 is just so happens that both of those numbers can be represented exactly, so you do get an exact result.

Retrieving lookup field values from a main table using MDM JAVA APIs

Hi all,
am trying to retrieve the main table data...., i could able to retrieve all the data except lookup field values..., iam facing some runtime exceptions and i dont know why exactly it is throwing this exception..., i pasted piece of code where exactly the error is and the exception also.
in the below sode i set some result set definitions and passing them to retrieveLimitedRecordsCommand. it is showing some exception at retrieveLimitedRecordsCommand.execute(); command.
//*** Code ***//
supportingMainResultDefinitions = new ResultDefinition[] { rdQual ,rdFlat, rdqFlat };
                                        retrieveLimitedRecordsCommand.setResultDefinition(rd);
                                        retrieveLimitedRecordsCommand.setSearch(new Search(tableId));
                                        retrieveLimitedRecordsCommand.setSession(sessionId);
                                        retrieveLimitedRecordsCommand.setSupportingResultDefinitions(supportingMainResultDefinitions);
                                        try {
                                        retrieveLimitedRecordsCommand.execute();
                                                PrintRecords.toConsole(retrieveLimitedRecordsCommand.getRecords());
                                                } catch (CommandException e) {
                                                e.printStackTrace();
//*** Below is the Exception raised ***//
java.lang.UnsupportedOperationException: Unexpected field type -1
        at com.sap.mdm.internal.schema.PropertiesHelper.createField(PropertiesHelper.java:274)
        at com.sap.mdm.internal.schema.PropertiesHelper.convertFrom(PropertiesHelper.java:281)
        at com.sap.mdm.internal.data.RecordMetadata.<init>(Unknown Source)
        at com.sap.mdm.internal.data.RecordsLoader.<init>(Unknown Source)
        at com.sap.mdm.internal.data.RecordsLoader.<init>(Unknown Source)
        at com.sap.mdm.internal.data.RecordResultSetHelper.convertFrom(Unknown Source)
        at com.sap.mdm.data.commands.RetrieveLimitedRecordsCommand.execute(Unknown Source)
        at com.sap.mdm.apitutorial.lesson2.RecordsDisplay.getDisplayRecords(RecordsDisplay.java:303)
        at org.apache.jsp.Sample_jsp._jspService(Sample_jsp.java:190)
        at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:99)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
        at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:325)
        at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
        at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
        at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:362)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
        at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
        at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
        at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:825)
        at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:738)
        at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:526)
        at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
        at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
        at java.lang.Thread.run(Thread.java:534)
If anyonw worked on this concept..., please provide me the solution
Regards
Praveen k

Which version are you using? Can you please try and narrow down to the offending field? You can do this by limiting the fields you provide to ResultDefinition.

CRM 2011: Can you control which form is used based not security roles, but on a field value?

I see that you can control which form is used based on security roles, but can you control it based on other field values? I'd like a new record to use a different form until a given status is updated. I have a status of draft and active. So
it would be nice if I could use form1 for those in draft, form2 for those that are active. But I only see where you can control that via the security roles.
I can code all of this via JavaScript, but having the ability to use two separate forms would be nice. Is that even possible.
Best regards,
Jon Gregory Rothlander

Hello,
Recheck following article - http://gonzaloruizcrm.blogspot.com/2014/11/avoiding-form-reload-when-switching-crm.html
Dynamics CRM MVP/ Technical Evangelist at SlickData LLC
My blog

How to use a parameter field value as a substring in a "like" statement?

Hi all,
I'm trying to use a parameter field in a Record selection formula where the parameter field value would be a substring of the data stored in the field.
My parameter field (SlctResearcher) is constructed as follows:
Type: string
List of Values: static
Value Field: (Reports) RptAuthors
(in Value Options) Allow custom values?: True
{Reports.PubDate} in DateTime (2009, 04, 01, 00, 00, 00) to DateTime (2010, 03, 31, 23, 59, 59) and
{Reports.RptAuthors} like "*{?SlctResearcher}*"
When I hit F5 to generate the data, I get no results (and the parameter prompt field does not even come up...)
If I modify the formula to put a hard-coded string, like
"*Jones*"
after the 'like', I get results (all the reports where "Jones" is a substring in the RptAuthors string.) If I modify the formula to just use the parameter field without the quotes/stars like:
{Reports.PubDate} in DateTime (2009, 04, 01, 00, 00, 00) to DateTime (2010, 03, 31, 23, 59, 59) and
{Reports.RptAuthors} like {?SlctResearcher}
I do get the parameter prompt field, but still no results even if I put in a valid substring value (since it is not searching for a substring anymore...)
How can I do this?
Thanks,
Will

1st thing... Make a copy of your report before doing anything!!!
To use a SQL Command, you'll want to open the Database Expert and look at the Current Connections. Expand the data source and the 1st option you see is the Add Command option.
To find the SQL That CR is currently using, choose Database from the menu bar and select Show SQL Query...
You can copy this and paste it directly into the command window. (If you you can write your own SQL you don't need copy CR's, it's just an option.)
You'll also want to take not of any parameters that you have, you'll need to add them the the Parameter List of the command as well... be sure to spell them EXACTLY as they are in the design pane.
Anyway, once the SQL statement is in the Command window you'll be able to alter the WHERE clause to use the wild cards.
For future reference... What type of database are you reporting against???
Jason

How to update field values in a database table using module pool prg?

hi
how to update field values in a database table using module pool prg?
we created a customized table, and we put 2 push buttons in screen painter update and display.
but update is not working?
data is enter into screen fields and to internal table, but it is not updated in database table.
thanks in adv
vidya

HI,
we already used the update statement. but its not working.
plz check this.
*& Module Pool       ZCUST_CALL_REC
PROGRAM ZCUST_CALL_REC.
TABLES: ZCUST_CALL_REC,ZREMARKS.
data: v_kun_low like ZCUST_CALL_REC-kunnr ,
       v_kun_high like ZCUST_CALL_REC-kunnr,
       v_bud_low like ZCUST_CALL_REC-budat,
       v_bud_high like ZCUST_CALL_REC-budat.
ranges r_kunnr for ZCUST_CALL_REC-kunnr .
ranges r_budat for zcust_call_rec-budat.
DATA: ITAB TYPE STANDARD TABLE OF ZCUST_CALL_REC WITH HEADER LINE,
      JTAB TYPE STANDARD TABLE OF ZREMARKS WITH HEADER LINE.
*data:begin of itab occurs 0,
    MANDT LIKE ZCUST_CALL_REC-MANDT,
    kunnr like ZCUST_CALL_REC-kunnr,
    budat like ZCUST_CALL_REC-budat,
    code like ZCUST_CALL_REC-code,
    remarks like ZCUST_CALL_REC-remarks,
    end of itab.
*data:begin of Jtab occurs 0,
    MANDT LIKE ZCUST_CALL_REC-MANDT,
    kunnr like ZCUST_CALL_REC-kunnr,
    budat like ZCUST_CALL_REC-budat,
    code like ZCUST_CALL_REC-code,
    remarks like ZCUST_CALL_REC-remarks,
    end of Jtab.
CONTROLS:vcontrol TYPE TABLEVIEW USING SCREEN '9001'.
CONTROLS:vcontrol1 TYPE TABLEVIEW USING SCREEN '9002'.
*start-of-selection.
*&      Module USER_COMMAND_9000 INPUT
      text
MODULE USER_COMMAND_9000 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'ENQUIRY'.
perform multiple_selection.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9001'.
WHEN 'UPDATE'.
      perform append_CUSTOMER_code.
      PERFORM SELECT_DATA.
      call screen '9002'.
      perform update on commit.
WHEN 'DELETE'.
      perform append_CUSTOMER_code.
      PERFORM SELECT_DATA.
      call screen '9002'.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_9000 INPUT
*&      Module STATUS_9000 OUTPUT
      text
MODULE STATUS_9000 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_9000 OUTPUT
*&      Module USER_COMMAND_9001 INPUT
      text
MODULE USER_COMMAND_9001 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
endcase.
ENDMODULE.                 " USER_COMMAND_9001 INPUT
*&      Module STATUS_9001 OUTPUT
      text
MODULE STATUS_9001 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
move itab-MANDT   to zcust_call_rec-MANDT.
move itab-kunnr   to zcust_call_rec-kunnr.
move itab-budat   to zcust_call_rec-budat.
move itab-code    to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
ENDMODULE.                 " STATUS_9001 OUTPUT
*&      Module USER_COMMAND_9002 INPUT
      text
module USER_COMMAND_9002 input.
CASE sy-ucomm.
   WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
      SET SCREEN 0.
      LEAVE SCREEN.
      CLEAR sy-ucomm.
   WHEN 'UPDATE'.
         perform move_data.
     UPDATE ZCUST_CALL_REC FROM TABLE ITAB.
        IF SY-SUBRC = 0.
           MESSAGE I000(0) WITH 'RECORDS ARE UPDATED'.
         ELSE.
           MESSAGE E001(0) WITH 'RECORDS ARE NOT UPDATED'.
        ENDIF.
WHEN 'DELETE'.
         perform move_data.
         DELETE ZCUST_CALL_REC FROM TABLE ITAB.
          IF SY-SUBRC = 0.
           MESSAGE I000(0) WITH 'RECORDS ARE DELETED'.
         ELSE.
           MESSAGE E001(0) WITH 'RECORDS ARE NOT DELETED'.
        ENDIF.
endcase.
endmodule.                 " USER_COMMAND_9002 INPUT
*&      Module STATUS_9002 OUTPUT
      text
module STATUS_9002 output.
SET PF-STATUS 'ZCUSTOMER1'.
SET TITLEBAR 'xxx'.
endmodule.                 " STATUS_9002 OUTPUT
*&      Module update_table OUTPUT
      text
module update_table output.
     move itab-MANDT   to zcust_call_rec-MANDT.
     move itab-kunnr   to zcust_call_rec-kunnr.
     move itab-budat   to zcust_call_rec-budat.
     move itab-code    to zcust_call_rec-code.
     move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
endmodule.                 " update_table OUTPUT
***Selection Data
FORM SELECT_DATA.
SELECT mandt kunnr budat code remarks FROM zcust_call_rec INTO
                        table itab
                         WHERE kunnr IN r_kunnr AND BUDAT IN R_BUDAT.
ENDFORM.
****append vendor code
FORM APPEND_CUSTOMER_CODE.
clear r_kunnr.
clear itab.
clear r_budat.
refresh r_kunnr.
refresh itab.
refresh r_kunnr.
IF r_kunnr IS INITIAL
              AND NOT v_kun_low IS INITIAL
               AND NOT v_kun_high IS INITIAL.
                    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                                EXPORTING
                                   input         = v_kun_low
                                IMPORTING
                                   OUTPUT        = r_kunnr-low.
                   CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                              EXPORTING
                                  input         = v_kun_high
                              IMPORTING
                                  OUTPUT        = r_kunnr-high.
                 r_kunnr-option = 'BT'.
                 r_kunnr-sign = 'I'.
                 append r_kunnr.
   PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
              AND NOT v_kun_low IS INITIAL
               AND v_kun_high IS INITIAL.
                    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                                EXPORTING
                                   input         = v_kun_low
                                IMPORTING
                                   OUTPUT        = r_kunnr-low.
                r_kunnr-SIGN = 'I'.
                r_kunnr-OPTION = 'EQ'.
                APPEND r_kunnr.
   PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
              AND v_kun_low IS INITIAL
               AND NOT v_kun_high IS INITIAL.
                    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                                EXPORTING
                                   input         = v_kun_low
                                IMPORTING
                                   OUTPUT        = r_kunnr-low.
                r_kunnr-SIGN = 'I'.
                r_kunnr-OPTION = 'EQ'.
                APPEND r_kunnr.
      PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
              AND v_kun_low IS INITIAL
               AND v_kun_high IS INITIAL.
                    IF SY-SUBRC = 0.
                         MESSAGE I003(0) WITH 'ENTER CUSTOMER NUMBER'.
                          CALL SCREEN '9000'.
                    ENDIF.
PERFORM V_BUDAT.
ENDIF.
ENDFORM.
FORM V_BUDAT.
IF R_BUDAT IS INITIAL
               AND NOT v_BUD_low IS INITIAL
               AND NOT v_BUD_high IS INITIAL.
                 r_budat-low = v_bud_low.
                 r_budat-high = v_bud_high.
                 r_budat-option = 'BT'.
                 r_budat-sign = 'I'.
                 append r_budat.
         ELSEIF R_BUDAT IS INITIAL
               AND NOT v_BUD_low IS INITIAL
               AND v_BUD_high IS INITIAL.
                 r_budat-low = v_bud_low.
                 r_budat-high = v_bud_high.
                 r_budat-option = 'EQ'.
                 r_budat-sign = 'I'.
                 append r_budat.
         ELSEIF R_BUDAT IS INITIAL
               AND v_BUD_low IS INITIAL
               AND NOT v_BUD_high IS INITIAL.
                 r_budat-HIGH = v_bud_HIGH.
                 r_budat-option = 'EQ'.
                 r_budat-sign = 'I'.
                 append r_budat.
          ELSEIF R_BUDAT IS INITIAL
               AND v_BUD_low IS INITIAL
               AND v_BUD_high IS INITIAL.
               IF SY-SUBRC = 0.
                   MESSAGE I002(0) WITH 'ENTER POSTING DATE'.
                  CALL SCREEN '9000'.
                r_budat-low = ''.
                r_budat-option = ''.
                r_budat-sign = ''.
                ENDIF.
        ENDIF.
ENDFORM.
*&      Form update
      text
--> p1        text
<-- p2        text
form update .
commit work.
endform.                    " update
*&      Form move_data
      text
--> p1        text
<-- p2        text
form move_data .
   clear itab.
refresh itab.
       move-corresponding zcust_call_rec to itab.
       MOVE ZCUST_CALL_REC-MANDT   TO ITAB-MANDT.
       MOVE ZCUST_CALL_REC-KUNNR   TO ITAB-KUNNR.
       MOVE ZCUST_CALL_REC-BUDAT   TO ITAB-BUDAT.
       MOVE ZCUST_CALL_REC-CODE    TO ITAB-CODE.
       MOVE ZCUST_CALL_REC-REMARKS TO ITAB-REMARKS.
     APPEND ITAB.
     delete itab where kunnr is initial.
endform.                    " move_data
thanks in adv
vidya

Web services test using WS Navigator doesnot return field values

Hi experts,
We are running ECC 6 (NW 7 Ehp1) ABAP stack and NW CE 7.1 with Java stack (J2EE Engine 7.11). We are trying to test web services using WS Navigator. We can logon to WS Navigator and perform the test. The test shows a success return code, however, it doesn't bring back field values. We can see the values when we perform this test within ABAP stack. A sample of WS Navigator XML log for the service test is as below:
<?xml version="1.0" encoding="utf-8"?>
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Header/>
<soap-env:Body>
    <n0:ZcGetCustomerInfoResponse xmlns:n0="urn:sap-com:document:sap:soap:functions:mc-style">
      <OKna1>
        <Mandt/>
        <Kunnr/>
        <Land1/>
        <Name1/>
        <Name2/>
        <Ort01/>
        <Pstlz/>
        <Regio/>
        <Sortl/>
u2026
       <MessageV3/>
        <MessageV4/>
        <Parameter/>
        <Row>0</Row>
        <Field/>
        <System/>
      </Return>
    </n0:ZcGetCustomerInfoResponse>
</soap-env:Body>
</soap-env:Envelope>
If someone can provide insight why is this happening, I would greatly appreciate it.
Regards
Nirmal

Wondering if I posted this in the wrong forum. Can someone please guide me if it is the wrong forum for this question.
Thanks
Nirmal

Printing field values to a PDF using a template

Hi
I have a set of field values stored in variables, I need to print these fields into a
PDF file. There is a template for this PDF , and each field value should go to a
specific location wrt the template on the new PDF. Could you any one
recommend a 3rd party API that can be used to do this purpose.

I used iText (http://www.lowagie.com/iText/) to do
this.
I created the template as a PDF and used AcroForms to
create named fields within specific formatting within
the PDF.
// Create a BAOS into which to write the
PDF.
ByteArrayOutputStream baos = new
ByteArrayOutputStream();
// Load the PDF template and open the form fields.
InputStream inputStream = new FileInputStream(
"template.pdf" );
PdfReader reader = new PdfReader( inputStream
PdfStamper stamp = new PdfStamper(reader,
baos);
AcroFields form = stamp.getAcroFields();
o set the text in a field:
     form.setField("field_name", "field value");
     // close the PDF and return the bytestream
     stamp.close();
     return baos;
It looks like that you are loading a PDF template from a file, and straight
away attempting to fill the form by using the name of the field. To do this shouldn�t the
template PDF be formatted in a specific way to access the specific
location of the template where the field is.
Can you tell me if the template PDF file should be formatted in a specific way
to do this using iText. I was thinking of calculating the offsets of each field
and just print the data at that location.
And I very much appreciate your help so far.

How do I convert the ASCII character % which is 25h to a hex number. I've tried using the scan value VI but get a zero in the value field.

How do I convert the ASCII character % ,which is 25h, to a hex number 25h. I've tried using the scan value VI but I get a zero in the value field.

You can use String to Byte Array for this.

Arithmetic operations using Picklist field values

Similar Messages

Maybe you are looking for