ARMv6 build won't install, says too little space.
Hey all,
I know the ARMv6 build is still experimental and therefore temperamental, but I saw the notice that it was broken has been removed and decided to give it a shot on my Eris.
When I attempt to install, I get the error "Fennec could not be viewed. Free up some space on your phone and try again." I have 34 MB free. For a 13 MB apk, that seems like it should be enough, but apparently I'm wrong.
How much free space do I need exactly to give the ARMv6 build a spin?
Thanks!
Not sure the most that should be needed is ~double the download size for it to be in the download folder then copied to the data folder for applications. Matt if you see this, any thoughts?
Similar Messages
-
I bought my daughter an ipad mini and used my Apple ID to transfer over her favorites. Now I can't use netflix and hulu. So I want create her an id but it won't let saying too young. I tried to create another one with my age and it still says too young.help!!!
iTUNES STORE - TERMS AND CONDITIONS
"This iTunes Service is only available for individuals aged 13 years or older, unless you are under 13 years old and your Apple ID was provided to you as a result of a request by an approved educational institution. If you are 13 or older but under the age of 18, you should review this Agreement with your parent or guardian to make sure that you and your parent or guardian understand it."
Restart the iPad. Tap Settings > iTunes & App Store then sign in your Apple ID. -
802.11n software enabler won't install - says hardware problem?
just downloaded802.11n software enabler - but it won't install, says hardware problem? just before downloading I did chat with customer support who said I was OK with my hardware:
Machine Name: MacBook
Machine Model: MacBook1,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MB11.0061.B03
SMC Version: 1.4f12
Serial Number: 4H6400FLVMM
Sudden Motion Sensor:
State: Enabled
even downloaded the airport 2007 extreme upgrade first.
so why won't the "N-enabler" install?
help?Your MacBook has a "Core Duo" processor.
The 'n' enabler is ONLY for "Core 2 Duo" processors. -
Update available for firefox 3.6.12 but won't install;says connection timed out
I've had firefox 3.6.12 for a couple of months. it says an upgrade is available, but won't install. says connection timed out. I tried it from IE 8 as well, same result. Took me a half our just to get to mozilla.com I installed IE 8 2 days ago, and since then, my monitor flashes the page when i'm in gmail. Also flash videos won't play worth a crap. I just installed K-lite Mega 6.6 to try to fix that.
I wonder if it's not some of the newer technologies like HTML 5 that the other browsers support. I have the same problem, and the sites load fine in Opera. I still have 3.6 (whatever's latest), and haven't upgraded to 4 yet because of all the extensions I use. I'm waiting until it's more stable and my more important extensions are usable. I use Hulu's desktop viewer and Opera to make up for it, currently.
Adding screenshots of my experience with it. The text will load, but no video or images. That's why I thought it might be some new language / protocol. -
2012 Macbk air, with OSX 10.8.5. See my question above. Mavericks won't install on my Air's HD, says that both the HD - AND - the external HD (which has a different name from the laptop HD) are used for time machine backups. I've deleted my time machine plists, restarted, repaired permissions, turned time machine off, repeatedly selected the external drive in time machine preferences. HELP. (Install went perfectly on my desktop Mac, which also has an external HD for time machine).
I need to add that the only place I have the "Backups.backupdb" folder is on my backup external disk, and it's not on my HD :-( . If it were, I'd delete it!
-
Downloaded Firefox 14.0.1. Would not install. Got message: "This version of Firefox requires Microsoft Windows XP SP2 or newer."
I have dial-up and it took an hour to load, now it won't install. Very frustrating, particularly as I have Windows XP. Why won't it load?
Thank you.Make sure that you do not run Firefox in compatibility mode.
You can open the Properties of the Firefox desktop shortcut via the right-click context menu and check the "Compatibility" tab.
Make sure that all items are deselected in the "Compatibility" tab of the Properties window. -
Flash player won't install (says it did)
I have repeatedly tried to install the new Flash Player and
have only ever got the page that says it has installed
successfully, but yet it doesn't. Videos still won't work, and I
can never find the install in program files or anywhere else. I
have saved the page I get, and would like to post it as an image or
attachment. Please tell me how I can do that.I'm glad I"m not the only person with this problem. I've
tried uninstalling and re-installing it, following the instructions
to download/extract/etc, and still nothing works. I keep getting a
security warning that Internet Explorer is blocking it, but it
won't allow me to by pass the block! -
I had an issue with my Cisco Anyconnect VPN not working, so uninstalled it. I've tried a new install and now I get the message "There is a newer version of the AnyConnect client installed" and it won't tell me install it at all. I've gone through various recommendations on the site included this :-
Go to "Regedit" and search for "Deterministic Networks" and delete it.
HKEY_LOCAL_MACHINE \SOFTWARE\Deterministic Networks
Search with the following keywords in the registry, under "Uninstall" or "Components" folders and delete any related entries.
Vpnapi
Vpngui
Cisco
CVPND
CVPNDRA
Ipsecdialer
Source: https://supportforums.cisco.com/message/3728011#3728011
But I've still got the same problem, and just cant find anything to help !Disable Internet Connection Sharing (ICS) and then try You can disable ICS in two ways:
Per Adapter:
Click the Start button.
Click on Control Panel.
Click on View Network Status and Tasks
Click on Change adapter settings
Right-click the shared connection and choose Properties
Click the Sharing tab
Clear the Allow other network users to connect through this computer's Internet connection checkbox
Click OK
System Wide:
Click the Start button (Windows' orb)
Type: services.msc and press ENTER
Double-Click on Internet Connection Sharing (ICS)
Change Startup Type to Disabled
Reboot the computer
You can now try reinstalling the WiscVPN client again -
The exe starts fine and walks me through the setup screens.
Then it goes down the list of items that it needs to do and when it
gets to 'installing' it goes no further. I get 2 bars on the
progess meter and that's it. I would love to be able to use this
feature. Anyone have any suggestions?Download
Report Builder directly to the laptop and install from there. -
CS6 won't install - says it cannot find the required files
I downloaded Adobe CS6 Production Premium from my University's website. When I tried to install it, it says it cannot find the required files for installation. I have attached the error message I received:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 7 error(s), 0 warning(s)
----------- Payload: {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 1.0.0.0 -----------
ERROR: Install MSI payload failed with error: 2 - The system cannot find the file specified.
MSI Error message:
----------- Payload: {7E91BB17-16A1-42CE-9502-D6C98BE04920} PDF Settings CS6 11.0.0.0 -----------
ERROR: Install MSI payload failed with error: 2 - The system cannot find the file specified.
MSI Error message:
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Microsoft_VC90_CRT_x86: Install failed
ERROR: DW050: - PDF Settings CS6: Install failed
ERROR: DW050: - Microsoft_VC80_CRT_x86: Install failed
ERROR: DW050: - Adobe Mini Bridge CS6: Install failed
ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed
Any suggestions?start here, http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
-
Lightroom won't install; says I need administrative privileges
I already have Photoshop CC. I updated to the new photography package with Lightroom and Photoshop and it keeps saying I need administrative privileges.
Is it Lightroom or your operating system that says you need Administrator privileges? Usually you do need this to install new software.
-
Download of iPhoto 9.2.3 won't install, says I need app store
I have a slow internet connection, but I have 4 computers, all running either Lion or Mountain Lion. I ike to download an update once from the Apple Download page, then put the single download on all 4 computers instead of trying to do this individually. So I downloaded iPhoto 9.2.3 from the Apple Downloads page. But when I go to install it I just get a message that says this program update needs to be downloaded from the App Store.
In there any way around this? Is there a way to use the update I downloaded from the download page instead up waiting days for all my computers to update from the App Store???I get the message "iPhoto cannot be opened because of a problem."
The panel with that error message has probably a report button to show a crash log. Copy and paste the first 50 lines of this crash report into your next message. What does it say?
What happened before iPhoto did no longer open? Did you install ne software or upgraded software? Imported new photos or videos?
Are other applications also having issues? -
Flash player won't install says error
flash flayer won't in stall says error
Read Before Posting: How To Get A Useful Answer To Your Question
-
I have two 13" Macbook pros, #1 has 2GB memory and #2 has 8GB memory. I installed a new 1TB SSHD hard drive in Mac #2. I downloaded OS X Marericks to Mac #1 and made a bootable USB. I put the USB drive into Mac #2, hold down the option key and start up. My install Mavericks usb comes up and i click on it, it brings up the next window properly and i go to disk utilities and formated the new hard drive properly. I than click on install OS X Marericks, the next window comes up and I click on continue. The next window comes up, and instead of being able to click continue again, there is a message that says OS X Mavericks requires 2GB memory or greater and a button to click that says Quit. This is the Mac that has 8GB memory ???????
I put the bootable OS XMavericks USB in Mac #1 with only 2GB memory and it works fine. Both Macs are mid 2009 and both work fine.
Anyone have a clue to what the problem may be??Could be Apple is locking the Mavericks install to the system it is downloaded TO. Not sure as I only have one Mac that has Mavericks installed and I have no desire to install it on my Mini.
Why not just download Mavericks to the other Mac? -
Captivate 8 won't install, says it's potentially counterfeit even though I just bought it
I went with a subscription, and downloaded the program right after purchasing and receiving confirmation that it's gone through. I opened the installer for the 64 bit, and when it gets to 27% when it finally installs Captivate 8 it stops and says:
The product you are trying to install is not an Adobe Genuine Software and appears to be counterfeit.
Please report piracy or contact customer support for assistance.
I bought the program not 1 hour ago, and just downloaded it from the Adobe site. How is it counterfeit?
Any thoughts?I posted on the forums because I wasn't able to get an actual Adobe rep to help out. But we did finally connect and I guess it just wasn't being run as Administrator on my PC. So to anyone else experiencing this problem, right click and run as administrator.
Maybe you are looking for
-
Cisco ASA 5505 Site to site VPN IPSEC tunnel to an Clavister Firewall
Hi, I have weird problem with a Site to site VPN tunnel from a Cisco ASA 5505 to an Clavister Firewall. When I restart the Cisco ASA 5505 the tunnel is up and down,up, down, down, and I get all strange messages when I see if the tunnel is up or down
-
Automatic Identification of Business Partner in Web IC
Hi, We have a new external software vendor(CTI) who is providing IVR for our SAP enviorment. Our goal is to find the BP automatically in the Web IC. How ever it is searching the based on Caller Phone Number. The external Vendor(CTI) is sending the Ph
-
Iterator in dynamic region located in a popup does not refreshed on cancel
Hi All, i have the following scenario: I have jsff made as a taskflow and added into a page on the following way: <af:popup id="address" partialTriggers="saveAddressButton cancelAddressButton"> <af:dialog type="none" title="Create/Edit Address" modal
-
Photoshop Elements 7 Editor Error & 10 trial error
Photoshop Elements 7 Editor Error Hello, Yesterday I did a clean install of Windows 7 (x64) on my PC & have completely updated it through Windows Updater, I than installed PSE7 (disk that I brought new 3 years ago & has worked fine up till now) & fol
-
Hello, my Firefox crashes constantly because of flash(error report here)
here is error report Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.3 BuildID: 20100401080539 CrashTime: 1273996117 EMCheckCompatibility: true Email: FramePoisonBase: 00000000f0de0000 FramePoisonSize: 65536 InstallTime: 1273994551 ProductName: F