Array size mismatch error (1047) from matlab to labview
Hello all,
I have a very strange situation here and I am hoping someone can come up with some ideas for me...
I am running labview vi's through a web page, and one of my vi's contains a matlab script with two array inputs, one 2d with a varying length, and the second a 1d array with a fixed set of parameters.
If I call this report on my local system, web server labview and matlab all running on my laptop. Everything works fine. I receive no errors and the matlab script runs and returns data as expected.
The problem is I have an Identical setup (as near as I can tell) setup on a server, and I receive a 1047 error, reporting an array size mismatch.
All the input arrays data sets are identical in the vi at the input into the matlab script. And as best as I can tell all sub VI's and M files are identical. The only difference I can come up with is that one setup is running on a server and the other is not, however other vi's using matlab script (although a simpler configuration (no direct inputs or outputs form matlab, all data transferred in and out via txt files )) run fine in both configurations.
On both systems I running matlab ver 7 (R14) with a single user license and Labview 7.1.
any ideas or suggestions would be greatly appreciated. Please let me know if any additional details are needed.
Thank you in advance,
Chris
Hello Matt,
Yes you were correct upgraded LV to 7.1.1 and everything is running fine now.
thanks
NPI_Chris wrote:
Hello all,
I have a very strange situation here and I am hoping someone can come up with some ideas for me...
I am running labview vi's through a web page, and one of my vi's contains a matlab script with two array inputs, one 2d with a varying length, and the second a 1d array with a fixed set of parameters.
If I call this report on my local system, web server labview and matlab all running on my laptop. Everything works fine. I receive no errors and the matlab script runs and returns data as expected.
The problem is I have an Identical setup (as near as I can tell) setup on a server, and I receive a 1047 error, reporting an array size mismatch.
All the input arrays data sets are identical in the vi at the input into the matlab script. And as best as I can tell all sub VI's and M files are identical. The only difference I can come up with is that one setup is running on a server and the other is not, however other vi's using matlab script (although a simpler configuration (no direct inputs or outputs form matlab, all data transferred in and out via txt files )) run fine in both configurations.
On both systems I running matlab ver 7 (R14) with a single user license and Labview 7.1.
any ideas or suggestions would be greatly appreciated. Please let me know if any additional details are needed.
Thank you in advance,
Chris
Similar Messages
-
Update file size mismatch error code U43M1D204
I had Creative Suite 6 Master Collection installed yesterday, about seven updates notification appeared, they were done successfully except for Photoshop Camera Raw and Media Encoder
I tried the workaround in this thread, i deleted AAM update folder, but no use
http://forums.adobe.com/message/3864845#3864845
i went to log file aamu.log and found the error messages:
2012-08-17T16:20:29: connecting to: = http://swupdl.adobe.com/updates/oobe/aam20/mac/AdobeMediaEncoderCS6-6/6.0.1/Setup.dmg
2012-08-17T16:20:30: ThreadDownloadUpdates:: Need to download a .sig file for this dmg at: /Users/bahaelaila7/Library/Application Support/Adobe/AAMUpdater/1.0/Install/AdobeMediaEncoderCS6-6/6.0.1/Setup.sig
2012-08-17T16:20:30: ThreadDownloadUpdates:: downloading .sig file from : http://swupdl.adobe.com/updates/oobe/aam20/mac/AdobeMediaEncoderCS6-6/6.0.1/Setup.sig
2012-08-17T16:20:31: ThreadDownloadUpdates: ERROR: File Size Mismatch, between what is given in manifest and what is that of bob.
2012-08-17T16:20:31: UCGetprogress : WARNING - Download failed due to file size mismatch at server.
2012-08-17T16:20:31: UCGetprogress : Updates download returning state for reffId = AdobeMediaEncoderCS6-6/6.0.1
2012-08-17T16:20:31: UCGetprogress : Updates download returning state = 43
2012-08-17T16:20:31: UCGetprogress : Updates download returning outError = 204
2012-08-17T16:20:31: UCGetprogress : Updates download returning percent = 0
2012-08-17T16:20:31: UCGetprogress : Updates download returning unique error code string = U43M1D204
2012-08-17T16:20:31: UCGetprogress : Updates download reporting headlight data for error code. = 204
2012-08-17T16:20:31: Check for Updates was done successfully.
2012-08-17T16:20:31: UCGetprogress : Check for updates returning state for reffId = AdobeMediaEncoderCS6-6/6.0.1
2012-08-17T16:20:31: UCGetprogress : Check for updates returning state = 21
2012-08-17T16:20:31: UCGetprogress : Check for updates returning outError = 0
2012-08-17T16:20:31: UCGetprogress : Check for updates returning percent = 100
2012-08-17T16:20:31: UCGetprogress : Check for updates returning unique error code string = U21M1C0
2012-08-17T16:20:31: UCGetprogress : WARNING - Download failed due to file size mismatch at server.
2012-08-17T16:20:31: UCGetprogress : Updates download returning state for reffId = AdobeMediaEncoderCS6-6/6.0.1
2012-08-17T16:20:31: UCGetprogress : Updates download returning state = 43
2012-08-17T16:20:31: UCGetprogress : Updates download returning outError = 204
2012-08-17T16:20:31: UCGetprogress : Updates download returning percent = 0
2012-08-17T16:20:31: UCGetprogress : Updates download returning unique error code string = U43M1D204
2012-08-17T16:20:31: UCDownloadUpdates : (A) UCIsSelfUpdateAvailable API returned value = 0
2012-08-17T16:20:33: Returning from << UCDownloadUpdates >> call with outErr value = 0
2012-08-17T16:20:33: ThreadDownloadUpdates: Downloading installer for update refID: PhotoshopCameraRaw7-7.0/7.1.71
2012-08-17T16:23:34: connecting to: = http://swupdl.adobe.com/updates/oobe/aam20/mac/PhotoshopCameraRaw7-7.0/7.1.71/Setup.dmg
2012-08-17T16:23:35: ThreadDownloadUpdates:: Need to download a .sig file for this dmg at: /Users/bahaelaila7/Library/Application Support/Adobe/AAMUpdater/1.0/Install/PhotoshopCameraRaw7-7.0/7.1.71/Setup.sig
2012-08-17T16:23:35: ThreadDownloadUpdates:: downloading .sig file from : http://swupdl.adobe.com/updates/oobe/aam20/mac/PhotoshopCameraRaw7-7.0/7.1.71/Setup.sig
2012-08-17T16:23:36: ThreadDownloadUpdates: ERROR: File Size Mismatch, between what is given in manifest and what is that of bob.
2012-08-17T16:23:36: UCGetprogress : WARNING - Download failed due to file size mismatch at server.
2012-08-17T16:23:36: UCGetprogress : Updates download returning state for reffId = PhotoshopCameraRaw7-7.0/7.1.71
2012-08-17T16:23:36: UCGetprogress : Updates download returning state = 43
2012-08-17T16:23:36: UCGetprogress : Updates download returning outError = 204
2012-08-17T16:23:36: UCGetprogress : Updates download returning percent = 0
2012-08-17T16:23:36: UCGetprogress : Updates download returning unique error code string = U43M1D204
2012-08-17T16:23:36: UCGetprogress : Updates download reporting headlight data for error code. = 204
2012-08-17T16:23:36: UCIsSelfUpdateAvailable : Function returned with value => = 0
2012-08-17T16:23:36: UCIsSelfUpdateAvailable : Is BOB downloaded => = 0I don't think it is related to firewall/security, because other updates for flash, dreamweaver and others updated successfully.
I had the same issue with one of Dreamweaver CS5.5 updates, it wouldn't update no matter how many times i redownload (using Adobe Updater).
one aspect is that, it takes its time downloading updates, but fails upon applying them, so links (accessing web) is not an issue here.
Also, looking at the error message, it says file size mismatch, and it appeard just ONE second after trying to download sig files
it's possible that, either sig file size mismatches what's written in webfeed file (or whatever "manifest" file as referred to in log),
or
dmg file size as written in sig file does not match the one dowloaded. as sig (signature) files are small, around 5k each. (could have been downloaded in less than one second).
I don't know why I haven't seen anyone else complaining from the same problem, though seemingly sig files are the same for same dmgs.
Or, I could have been the first to complain, and what I did worked for them too, hopefully -
Native vlan mismatch error msg from cdp
get this message from my 6509 connects to 3550. but no trunking is set between them. my other ports also have the same settings, with no err msg but have a native vlan unknown status... why???
this 6509 is not set by me.. :(I do not have enough information from you to say if it is a bug. Past output of
sh ver
sh cdp neigh detail
sh int trunk
sh run int gigx/y or sh run int fas x/y -
Hi, there,
I am wondering how to get the table information by labview database
connectivity toolset. The table list vi comes with the toolset can get
only col name, data type and data size. And I found the the data size
always gives back -1, even though it is a string type. Do somebody has
some idea about it?
Thanks.
JJJJ,
Go into the diagrams of the DBTools List Columns and DBTools Get Properties respectively. When you inspect this diagram, you will see the raw ActiveX properties and methods called to get the size information. The value of -1 means the requested recordset is already closed. This is the sort of thing that is controled by the driver (ODBC, OLE DB, Jet, etc) you are using. Notice that you can right click on the property and invoke nodes and get more information about these specific items directly from the ADO online help.
Crystal -
Error 1073807339 from Sartorius CP225D Labview control program
I'm trying to use RS232-to-USB to read from Sartorius analytic balance CP225D. I built a program using the Sartorius-SBI drivers from NI.
However, whenever I run the program, it always gives the error 1073807339. Sometimes, I can obtain several correct measurement data and then it suddenly outputs error.
Alternatively, we have been using the software called Winwedge (http://www.taltech.com/winwedge) to read data from the balance and it has actually been working. I'm working on the Labview program because I need to synchronize multiple instruments and Winwedge is not going to help with that. That said, I believe the program is not in the balance, and I've matched baud rate, parity, data bits and stop bits in each program. But it still doesn't work.
Can anyone suggest what could be wrong?
Attachments:
Sartorius.vi 21 KB
error.JPG 52 KB
error2.JPG 64 KBHi, Dennis,
I moved the Initialize outside the loop. But I still got the same problem. It reads data correctly for a few seconds, and then it errored. Still the same error code.
Attachments:
error3.JPG 50 KB
Sartorius v2.vi 21 KB -
Checks just feed through or paper size mismatch on C7250, Bad paper sensors on new printers
Hi all,
I have seen these related posts:
http://h30434.www3.hp.com/t5/Other-printing-questions/Printing-checks-on-officejet-pro-8500/m-p/2460...
http://h30434.www3.hp.com/t5/Other-printing-questions/B8850-Printing-Problem-on-Canary-print-paper/t...
http://h30434.www3.hp.com/t5/Other-printing-questions/HP-C7280-rejects-CD-Lables/m-p/246098
http://h30434.www3.hp.com/t5/Other-printing-questions/CAUTION-DESIGN-FLAW-IN-THE-NEW-GENERATION-OF-H...
http://h30434.www3.hp.com/t5/Other-printing-questions/printer-won-t-do-labels-help/td-p/233645
http://h30434.www3.hp.com/t5/Other-printing-questions/HP-Photosmart-Plus-Printer/td-p/233156
Sorry that there may be many other related posts I only went back one month! There appear to be MANY problems with newer HP printers and paper sensors with either checks or labels just feeding through or reporting paper size mismatch.
I have a photo smart C7250 and I have checks that I try to print with Quicken. I purchase my checks from NEBS a large supplier of pre-printed business forms.
Sometimes when I print checks they work fine. Other times one or more just feed through unprinted. Other times one feeds and the printer displays a paper size mismatch error.
I also noticed one day when I put the checks in backward by mistake that they all printed fine, so today I decided to look at support for printer paper sensor problems and I found the above listed items.
I am going to try two things:
1) placing a blank white label over some of the pre-printed areas of the checks and see if that helps.
2) Switching back to my old reliable DJ895 for checks if that fails.
I think HP support should look at this message and the related threads I have found and come out with:
1) A workaround or software upgrade to bypass the bad paper sensors in many of these printers, my C7250 and the other printers listed in the other threads.
2) Feed this information back to HP product engineering and QA so that they try colored paper and common pre-printed forms as part of their printer design and testing. As a design engineer myself, (for another company not printers) I am embarrassed for HP that as a leading printer company they could be so lax in the design and testing of their printers.
If anyone knows how to get HP’s attention please let me know!
I hope the rollup of these related threads on check and label printing problems may help you with your problems.
Thank you,
JamesI know this is not a timely answer to your post but I just found it while trying to solve the same problem. Several people have asked the same question but none of them seem to receive helpful replies.
Maybe you've corrected this problem by now and if so, let me know, but this is what I have decided to do.
I set aside my cards from the card/envelope set that I purchased from Michaels, bought a package of 8.5 by 11 cardstock. I printed my message on that, locating it on the page so that I could cut off the right side and the bottom and it was perfectly placed. If you have not done this before, you will have to score the cardstock at the fold so that it will bend nicely. They fit perfectly with the envelopes.
Hope this helps in the future
Linda -
Change array size and delete duplicate row
Hello,
I am running a program that does a for loop 3 times. In each loop, data is collected for x and y points (10 in the example provided). How can I output the array with the 30 points in a simple 2D array (size 2x30)?
Also, from the array, how do I delete duplicate rows that contain the same x-value?
Thanks,
hiNi.
Solved!
Go to Solution.
Attachments:
array size.vi 10 KBHello,
THANK YOU for solving my first issue! Attached is the data set that contains the duplicate entries for the x-axis values. The y-axis value may be different, but not the x. I would like to delete the 2nd row that contains the same x-value.
Here is simple example of my input and desired output:
IN:
28.512000 -115.310532
28.812000 -86.937660
29.112000 -116.877052
29.412000 -87.223625
29.412000 -111.349045
30.012000 -86.510780
30.312000 -112.048187
OUT:
28.512000 -115.310532
28.812000 -86.937660
29.112000 -116.877052
29.412000 -87.223625
30.012000 -86.510780
30.312000 -112.048187
I am thinking of comparig the last x-axis value to the current one, and if it is the same, then not parse that row. The attached VI is as far as I got.
Any help will be greatly appreciated.
Thanks,
hiNi
Attachments:
delete duplicate row.vi 8 KB
data.txt 1 KB -
Calling labVIEW vi from matlab
i want to pass data (modulated sine wave) from matlab into labview,
transmit it (through the NI-DAQ card) into a channel, receive it back
on the input port of the card and pass the data back from labVIEW into
matlab. i built the vi and compiled the corresponding mex function.
when called, the function runs without error but the problem is that i
get back only noisy values and i have also verified with the help of a
CRO that no actual wave is transmitted. i.e., it seems that the labVIEW
vi doesn't actually run (though the LabVIEW window does open). this
after i have selected the "load front panel" option in the vi
properties. i might add that when i created a vi that uses the
"simulate sine signal" tool of labVIEW itself to transmit a sine wave
over the channel (As against using data from matlab, as in the former
case) but receive the data into matlab only (as in the former case),
the VI runs when called from matlab, the CRO shows sine waves being
transmitted and received and the data i receive into matlab is an
attenuated sine wave as expected. any MIT pro who can help me out?
Thanks.It sounds like the problem is not that the VI isn't running, but rather that the data it is "receiving" from MATLAB is getting messedu up. This conclusion is drawn, of course, from the fact that simulated data can successfully be written and read in LabVIEW and passed to MATLAB using the same methods. The only way to get to the bottom of this dilemma is going to be to do some good, old-fashioned troubleshooting.
Since we believe that the problem lies in MATLAB passing data to LabVIEW, the first thing you can try is putting a pause at the beginning of your LabVIEW code and creating a graph on the VI's front panel to show the data before it is written. If it is jumbled there, then you'll next want to check the data inside of MATLAB before it is passed. If that data is okay, then you've narrowed it down to the actual transfer, and you should then start making sure that you are matching the proper datatypes and formats. Hope this points you in the right direction!
Kind Regards,
E. Sulzer
Applications Engineer
National Instruments -
ABS from MATLAB (simulink) to Labview (.vi file)
Hello
My Antiskid Control System project requires me to plot the graphs of wheel speed and vehicle speed. The original model is from Matlab simulink file-absbrake(this is an example of control)
I tried to convert the whole system into labview representation. I donot want to use SIT or RT or any other Labview tools. I wanted to convert from Simulink model into Labview element-by-element. Can anyone help me...plss
my due date for submission is 15march...so please help meabs.vi is the file that i attempted to 'convert' from matlab into labview
Attachments:
abs.vi 97 KB
absbrake.vi 32 KB
absdata.vi 1 KB -
Difference between the Matlab and LabVIEW Hann (Hanning) functions
Hi All,
I'm hoping someone out there can satisfy my curiosity. I have been porting over some code from Matlab to LabVIEW and came accross a difference in the two implementations of the Hann function. Essentially:
LabVIEW has array length = n
http://zone.ni.com/reference/en-XX/help/371361J-01/lvanls/hanning_window/
Matlab has array length -1 = N.
http://www.mathworks.co.uk/help/signal/ref/hann.html
(where n= N in the two implementations)
As I'm not very clued up on signal processing I was hoping someone could explain why there is a difference in implementation and why array length was chosen for the LabVIEW implementation. According to wolfram the parameter a is full width at half maximum:
http://mathworld.wolfram.com/HanningFunction.html
http://mathworld.wolfram.com/FullWidthatHalfMaximum.html
Is the difference just due to the interpretation of what this value should be?
I've attached a modified version of the window comparison example to illustrate the diference.
Thanks,
Attachments:
Window Comparison from example.vi 32 KB^N wrote:
LabVIEW has array length = n
Matlab has array length -1 = N.
Could part o the confusion be due to the fact that LabVIEW arrays start with index zero and matlab arrays start with index one?
I'll look at your code later...
LabVIEW Champion . Do more with less code and in less time . -
Hi,
I am facing issues like Type Mismatch while passing Array of interfaces from .NET to VBA and vice versa using VSTO technology.
My requirement is that ComInterfaceType needs to be InterfaceIsIDispatch.
My Interface definition is somewhat like this
[ComVisible(true)]
[InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
[Guid("AAF48FBC-52B6-4179-A8D2-944D7FBF264E")]
public interface IInterface1
[DispId(0)]
IInterface2[] GetObj();
[DispId(1)]
void SetObj(ref IInterface2[] obj);
[ComVisible(true)]
[InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
[Guid("CDC06E1D-FE8C-477E-97F1-604B73EF868F")]
public interface IInterface2
IF i am passing array of above interface (created in C#.Net) to VBA using GetObj API,i am getting type mismatch error in VBA while assigning the value to variable in VBA.Even assigning to variant type variable gives TypeMismatch.
Also while passing Array of interfaces from VBA using SetObj API,excel crashes and sometimes it says method doesn't exists.
Kindly provide some assistance regarding the same.
ThanksHi,
I am facing issues like Type Mismatch while passing Array of interfaces from .NET to VBA and vice versa using VSTO technology.
My requirement is that ComInterfaceType needs to be InterfaceIsIDispatch.
My Interface definition is somewhat like this
[ComVisible(true)]
[InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
[Guid("AAF48FBC-52B6-4179-A8D2-944D7FBF264E")]
public interface IInterface1
[DispId(0)]
IInterface2[] GetObj();
[DispId(1)]
void SetObj(ref IInterface2[] obj);
[ComVisible(true)]
[InterfaceType(ComInterfaceType.InterfaceIsIDispatch)]
[Guid("CDC06E1D-FE8C-477E-97F1-604B73EF868F")]
public interface IInterface2
IF i am passing array of above interface (created in C#.Net) to VBA using GetObj API,i am getting type mismatch error in VBA while assigning the value to variable in VBA.Even assigning to variant type variable gives TypeMismatch.
Also while passing Array of interfaces from VBA using SetObj API,excel crashes and sometimes it says method doesn't exists.
Kindly provide some assistance regarding the same.
Thanks -
Passing arrays from matlab to vi-controls by activex
Dear specialists,
I am trying to set an array of doubles that is defined as a control in my VI by using:
invoke(VIhandle, 'SetControlValue', mlarray)
where mlarray is defined in Matlab as an 1xn array of doubles.
error: ??? Dispatch : Exception occurred
in routine: actxcli
Reading an indicator array in the VI by 'GetcontrolValue' works fine.
Also passing non-array variables works fine.
How should I define my array in Matlab/Labview to make it work ?I do not have a copy of Matlab but I can help you search the web. Is your error from windows, matlab, or labview? I could find nothing on NI's site for actxcli. Is this the exact error message?
-
HPePrint gives paper mismatch error when I try to print from my android phone
I have 5x7 paper in the Photosmart 7520 printer and when I try to send a photo from my android phone to the printer, I get a paper mismatch error. Will it only print 4x6? Can I not change a setting somewhere?
This question was solved.
View Solution.When I print from my Mac, I don't get the error as I'm printing from an application like Lightroom and I can tell it the paper size. Don't get that opputunity when I print from my phone. By default, I think the printer assumes 4X6. Wish that there was some way to tell it otherwise as I'd rather use 5x7
-
Hi,
I'm having a problem in calling the Java Applet's Function from Visual Basic. First, I'm getting the handle of the Java Applet and components of it using "Document.Applets(n)" which is a HTML function. I'm calling this function from Visual Basic. My code is something like this...
' // Web1 is IE Browser in my Form.
Dim Ap,Comp
Dim Bol as Boolean
Bol = true
Ap = Web1.Document.Applets(0).getWindow() ' \\ Gets the Parent Window.
Ap.setTitle("My Java Applet") ' \\ Sets the Title of the window.
msgbox Ap.getVisibility() ' \\ This will return a Java boolean ( true or false )
Ap.setVisibility(Bol) ' \\ Function Syntax is : void setVisibility(boolean b)
Here in my code , i'm able to call any function that which accepts Integer or String but not boolean. So, i m facing problem with Ap.setVisibility() function. It gives me a "Type mismatch error" while executing it. Can you please tell me a way to do this from Visual Basic !
I'm using Visual Basic 6.0, Windows 2000 , J2SDK 1.4.2_05.
Please help me Friends.
Thanks and Regards,
Srinivas Annam.Hi
I am not sure about this solution. try this
Declare a variable as variant and store the boolean value in that variable and then use in ur method.
Post ur reply in this forum.
bye for now
sat -
Error 1047 with LV 7 and Matlab 7
I am getting error 1047 when I add an input to the Matlab script node. I have:
-installed the new script,
-openned Matlab first then LV
however I still get error 1047. I have attached my small program. I'd appreciate a reply! Thank-you!
Ivanka
Attachments:
July_5-04-learning.vi 19 KBIBAHKA wrote:
> I am getting error 1047 when I add an input to the Matlab script node.
> I have:
> -installed the new script,
> -openned Matlab first then LV
> however I still get error 1047. I have attached my small program.
> I'd appreciate a reply! Thank-you!
Check on NI's site for a patch. Matlab changes the Active X registry
with each new version and the Matlab script node explicitedly loads the
Acitve X interface by GUID. Of course NI can not guess at the next GUID
used by Matlab so they can only support released Matlab versions at the
time when they release a LabVIEW version. They usually release a new
matlab script interface DLL to replace the old one with, shortly after
Matlab releases a new version so it should be available by now I would
guess.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions
Maybe you are looking for
-
Filter(NULL IS NOT NULL) in Explain Plan ??
Hi All, Can someone please explain what this explain plan statement means? I see a filter(NULL IS NOT NULL) as the first statement - could not figure out why it came up so from googling. My Query Used: EXPLAIN PLAN FOR MERGE INTO summary_bysrccd USIN
-
Text message on the new iphone
is there a way for the message preview to not pop up. I do not want it to interrupt me. I can see when I have a message but I don't want to see the preview. Can you help?
-
I accidentaley got on my friend's account on messeging and i dont know how to get off it!!! PLZ HELP ME! D':
-
Portal Runtime Error when excecuting a published iview
Hi, I have an issue concerning the iviews published by the BEx 7.0 to the Portal. I get a Portal Runtime Error when I execute them on the portal. The log on J2EE server is: Exception in SAP Application Integrator occured: Unable to parse template &\#
-
Hello, We want to configure CCMS monitoring for one our systems. But we don't want to configure CEN using Solution manager. After searching, I found that every source describes the process for configuring CCMS using CEN. I know that we can configure