ARRI AMIRA PRO RES FOOTAGE - this is supposed to play natively but i'm getting the dreaded red line.
I have legit pro res software installed (compressor) so i am assuming premiere should be able to play this fine - help!
FCP plays it without buffering - even space baring the file from finder plays it.
also I can't find the LUT to toggle between log and preset
Try adjusting things with /Applications/Utilities/AudioMIDI Setup - that sets the global audio parameters for all input and output devices.
There are utilities like Jack and SoundFlower for PPC Mac's that allow you to 'manage' audio better but I don't think any are Universal Binary (Intel) yet.
Similar Messages
-
(final cut pro x 10.0.9 )After numerous troubleshooting tips, I am still getting the dreadful your disk have ran out of space, your events have moved or permissions have changed. This happened after I moved some files to another drive. They won't relink eventhough the files are there.
(final cut pro x 10.0.9 )After numerous troubleshooting tips, I am still getting the dreadful your disk have ran out of space, your events have moved or permissions have changed. This happened after I moved some files to another drive. They won't relink eventhough the files are there.
-
Hello I have a question about Converting 60>23.98 Cannon Mark III footage.
In cinema tools, my footage stays grayed out. Both when I try my Compressor pro-res footage, & original footage from cam.
When I convert from 60>23.98 in the Gopro app, it works fine.
Does anyone know if there is any quality loss in this app?
Also does anyone know another free software tht works great to convert markIII 60>23.98 footage?
Thank u thank u thank u !!!!Questions about Cinema Tools should be asked in the Final Cut Studio forum.
Russ -
i have a 2004 30gb ipod colour.....it was previously set up so i could manage the music on an old mac book pro g4.....i now have a new mac book pro, but i cannot get the music from my old ipod on to my mac......how do i do this???
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your Mac and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
Once you have successfully done that you can go ahead and choose Erase and Sync when you plug your iPod in.
B-rock -
I ordered my iPhone 5s in online and already received it. but there was supposed to be a $ 50 gift card with this, i haven't received it. how can i get the gift card?
Contact whomever you ordered the device from.
No one in these user to user support forums can assist with such issues. -
My MacBook Pro mid 2012 laptop continuously lags on every web site and I get the spinning beach ball very often but when I log in as a guest, everything works fine. What should I do to fix this?
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test. -
I spilled a small amount of wine on my macbook pro keyboard, I know, killing myself over this! I dried it fully but 24 hours later the keys are very sticky and it won't find the Bluetooth module so I can't use my magic mouse - everything else seems to be working fine. Thanks for any tips!
Your keyboard will never be right again; it needs to be replaced. There's no effective way to clean sticky stuff out of it. Your Bluetooth module may have been shorted out and destroyed, and it probably isn't dry yet after only 24 hours.
Take your machine in for repair, and expect a hefty bill in the hundreds of dollars. -
i have an itunes library with 1,000+ songs on a pc. my daughter has a macbook air and i loaded my apple ID onto it. how do i get the songs from my itunes account to show up? This works fine on her iPhone, but having trouble on the new macbook air
Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
My mac book pro 2.3ghz intel core i7 will not start up. I get the apple and the circle thing but thats it. Please help!!!
Give this a try:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
If i buy a Macbook Pro online in a country with a special keyboard. Will i get the Mac with my country keyboard?
I want to buy it on sale this friday, so a quick answer will make me happy :)You should - if you're in the UAE, for instance, you should get an Arabic keyboard (you may have to specify when you configure your machine - I don't know, I live in the US).
Clinton -
I am getting an Error when I try to open Firefox that Says Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. This has happened several times recently. I deinstalld and reinstalled but am still getting the error. Any thoughts?
This happens to me as well. However, I have a shortcut on my desktop as well as my quick start bar. When this has happened to me, I can usually log back in without restarting, by using the shortcut on the desktop rather than the usual quick start bar.
I know this sounds weird, but it has worked for me about 80% of the time. -
After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode. -
This is a stupid question but I needed to ask because I don't want to go there and not being able to buy it, but can I get the iPhone 5 brought straight there when I go to an apple store?
And I meant go to the apple store physically without preordering it online, and I meant the Southampton one. So could I just stroll in apple store and buy a iPhone 5 in Southampton apple store and buy the iPhone 5 straight away? Because I didn't want to have to wait? I just want to go in and buy it and go out with it, if you guys get what I mean? And felipeV if it is in stock could I just buy it and leave with my iPhone 5?
-
After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch. I've tried the troubleshooting tips on the Forum without success (though most are pretty old...). Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep. Anybody else with this issue??
My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi -
I'm trying to up grade the os but I keep getting the startup disk is full I ordered more memory I was told this will not help. What do I do?
I think as drive capacities increase, the old 10-15% becomes less accurate. The amount of free space you need doesn't really have anything to do with the drive size. So, increasing your drive size shouldn't mean that you need to have more free GB (which using a % of drive space would mean). You need free space to accommodate page outs (the amount of which would depend on how much RAM you have installed and how memory intensive the applications are), sleep images (again, this would max out at your total amount of RAM), and a bit to minimize fragmentation.
With desktop drives commonly in the 2TB range today, it is certainly not necessary to have 200GB+ free in order to maintain proper operation. I generally find about 30GB to be the minimum I'm comfortable with. Mind you, I pretty much always have way more than that available. But, if I'm working on a system and the amount of free space is at least 30GB, I would generally not site drive space as the cause of any performance issues. I'd say that 30GB is a minimum for a stable system (with 8GB or RAM installed). Of course at that amount, you would still need to free up space if you were to want to install or download any significant amount of data.
With servers being more likely to run into the 16GB of RAM range, more storage would be necessary. Most servers should be well stocked with storage, but the actual needs would vary greatly depending on what's being "served".
The 10-15% thing came about when we used to talk about drive capacities in hundreds of MBs and RAM in terms of KB (not MB and certainly not GB). More drive space is always a good thing, but as drive capacities continue to sky rocket, we don't need to dedicate larger amounts of storage on systems with the same specifications. A set amount of space is required for proper operation regardless of the capacity of the drive installed.
Maybe you are looking for
-
Acrobat X Pro--problems after 6/14/11 update
Has anyone else seen problems with the print cycle after doing the 10.1 (6/14/11) update to Acrobat X Pro? These only started happening with that update: uninstalling the updated AXPro and reinstalling from the original distribution causes the proble
-
How to instal iMovie6 in my new iMAC
What is the best way to install iMovie6 to my new iMac that is on it's way...I read so much about how no one likes the new iMovie8. So should I use firewire and transfer it or should I use the disc? The reason I ask is because I have so many plugins
-
Mulitple Message Transformation BPM Problem
I am getting a map failure exception because of the following reason (see below) and am not sure what to do about it. I am a BPM process and have a received a populated Request Message, mapped the Request Data into a Bapi request (via BPM Transforma
-
0015 info type BDC upload program work normal for one and slow for other?
Hi... Experts We have created custom BDC tp update infotype 0015 for our employees. It use to work normal initial. recently , We observed for the HR Team who use to upload this is working / update happening very slow. To isolate this , we have given
-
We turned on security archving for adapter engine in our system... And we have configured messages with S/MIME security settings. Files are getting generated in XI_SEC folder of the archive... We were unable to read this file from Unix level and not